Chemical Engineering Commons^™

Creation Of Non-Electric Cooling System For Food Preservation In Peru, Eleanor Ott, Dr. Randy Lewis

Journal of Undergraduate Research

Food preservation is an issue in third-world countries around the world where electricity and monetary means are not present to maintain a modern refrigerator. The short shelf life of unrefrigerated food items creates waste, requires time and energy with frequent trips to buy food, and lowers quality of life. Multiple solutions for this problem have been devised which are principally applicable in Asia and Africa. Implementation of these solutions has increased shelf-life of perishable foods and eliminated the need for daily trips to the market for food. A natural consequence has been increased profits, more educational opportunities for women, and …

Rates Of Cavity Filling By Liquids, Dongjin Seo, Alex M. Schrader, Szu-Ying Chen, Yair Kaufman, Thomas R. Cristiani, Steven H. Page, Peter H. Koenig, Yonas Gizaw, Dong Woog Lee, Jacob N. Israelachvili

Faculty Publications

Understanding the fundamental wetting behavior of liquids on surfaces with pores or cavities provides insights into the wetting phenomena associated with rough or patterned surfaces, such as skin and fabrics, as well as the development of everyday products such as ointments and paints, and industrial applications such as enhanced oil recovery and pitting during chemical mechanical polishing. We have studied, both experimentally and theoretically, the dynamics of the transitions from the unfilled/partially filled (Cassie–Baxter) wetting state to the fully filled (Wenzel) wetting state on intrinsically hydrophilic surfaces (intrinsic water contact angle < 90°, where the Wenzel state is always the thermodynamically favorable state, while a temporary metastable Cassie–Baxter state can also exist) to determine the variables that control the rates of such transitions. We prepared silicon wafers with cylindrical cavities of different geometries and immersed them in bulk water. With bright-field and confocal fluorescence microscopy, we observed the details of, and the rates associated with, water penetration into the cavities from the bulk. We find that unconnected, reentrant cavities (i.e., cavities that open up below the surface) have the slowest cavity-filling rates, while connected or non-reentrant cavities undergo very rapid transitions. Using these unconnected, reentrant cavities, we identified the variables that affect cavity-filling rates: (i) the intrinsic contact angle, (ii) …

Modeling Soot Formation From Solid Complex Fuels, Alexander J. Josephson, Rod R. Linn, David O. Lignell

Faculty Publications

A detailed model is proposed for predicting soot formation from complex solid fuels. The proposed model resolves two particle size distributions, one for soot precursors and another for soot particles. The precursor size distribution is represented with a sectional approach while the soot particle-size distribution is represented with the method of moments and an interpolative closure method is used to resolve fractional methods. Based on established mechanisms, this model includes submodels for precursor coagulation, growth, and consumption, as well as soot nucleation, surface growth, agglomeration, and consumption. The model is validated with comparisons to experimental data for two …

Gekko Optimization Suite, Logan Beal, Daniel Hill, Ronald Abraham Martin, John Hedengren

Faculty Publications

This paper introduces GEKKO as an optimization suite for Python. GEKKO specializes in dynamic optimization problems for mixed-integer, nonlinear, and differential algebraic equations (DAE) problems. By blending the approaches of typical algebraic modeling languages (AML) and optimal control packages, GEKKO greatly facilitates the development and application of tools such as nonlinear model predicative control (NMPC), real-time optimization (RTO), moving horizon estimation (MHE), and dynamic simulation. GEKKO is an object-oriented Python library that offers model construction, analysis tools, and visualization of simulation and optimization. In a single package, GEKKO provides model reduction, an object-oriented library for data reconciliation/model predictive control, and …

Homogeneous Reaction Kinetics Of Carbohydrates With Viologen Catalysts For Biofuel Cell Applications, Hilary Bingham

Theses and Dissertations

Energy usage is continually on the rise and significant efforts are being extended to provide more renewable energy. One area of exploration is the development of fuel cells, which includes biofuel cells that can extract energy from carbohydrates obtained from biomass. Recently, viologen catalysts have been shown to enhance reaction rates of energy extraction and improve carbohydrate conversion efficiencies. However, characterizing the effects of process parameters such as pH, reactant concentrations, and carbohydrate exposure time to buffer solutions with a rigorous model is lacking. This thesis characterizes the homogeneous reaction between carbohydrates and a methyl viologen catalyst to provide insights …

Smart Technologies For Oil Production With Rod Pumping, Brigham Wheeler Hansen

Theses and Dissertations

This work enables accelerated fluid recovery in oil and gas reservoirs by automatically controlling fluid height and bottomhole pressure in wells. Several literature studies show significant increase in recovered oil by determining a target bottomhole pressure but rarely consider how to control to that value. This work enables those benefits by maintaining bottomhole pressure or fluid height. Moving Horizon Estimation (MHE) determines uncertain well parameters using only common surface measurements. A Model Predictive Controller (MPC) adjusts the stroking speed of a sucker rod pump to maintain fluid height. Pump boundary conditions are simulated with Mathematical Programs with Complementarity Constraints (MPCCs) …

Integrated Scheduling And Control In Discrete-Time With Dynamic Parameters And Constraints, Logan Beal, Damon Petersen, David R. Grimsman, Sean Warnick, John Hedengren

Faculty Publications

Integrated scheduling and control (SC) seeks to unify the objectives of the various layers of optimization in manufacturing. This work investigates combining scheduling and control using a nonlinear discrete-time formulation, utilizing the full nonlinear process model throughout the entire horizon. This discrete-time form lends itself to optimization with time-dependent constraints and costs. An approach to combined SC is presented, along with sample pseudo-binary variable functions to ease the computational burden of this approach. An initialization strategy using feedback linearization, nonlinear model predictive control, and continuous-time scheduling optimization is presented. The formulation is applied with a generic continuous stirred tank reactor …

One-Dimensional Turbulence Modeling For Cylindrical And Spherical Flows: Model Formulation And Application, David O. Lignell, Victoria B. Lansinger, Juan Medina, Marten Klein, Alan R. Kerstein, Heiko Schmidt, Marco Fistler, Michael Oevermann

Faculty Publications

The one-dimensional turbulence (ODT) model resolves a full range of time and length scales and is computationally efficient. ODT has been applied to a wide range of complex multi-scale flows, such as turbulent combustion. Previous ODT comparisons to experimental data have focused mainly on planar flows. Applications to cylindrical flows, such as round jets, have been based on rough analogies, e.g., by exploiting the fortuitous consistency of the similarity scalings of temporally developing planar jets and spatially developing round jets. To obtain a more systematic treatment, a new formulation of the ODT model in cylindrical and spherical coordinates is presented …

Increased Energy Yield Through Fast Pyrolysis: Empowering Malawian Villages, Diehl Mutamba

Undergraduate Honors Theses

Biomass contributes to several renewable energy technologies. This project will explore the use of fast pyrolysis to produce fuels by designing an apparatus for fast pyrolysis. Malawian people harvest firewood from the forests, which is a major contributor to deforestation. Furthermore, they convert some of it to charcoal with about 10-15% efficiency to sell to city dwellers. The project will enable herbaceous fuels to replace wood, increase charcoal yields and create new products. Firewood and charcoal produce smoke and carbon monoxide (CO) that compromises the villagers’ health.

This project will address deforestation problems, improve sustainability, decrease health hazards and improve …

Suitability Of The Kalina Cycle For Power Conversion From Pressurized Water Reactors, Jack Ryan Webster

Theses and Dissertations

The primary objective of this work is to determine the Kalina cycle's suitability for thermal power conversion from a pressurized water reactor. Several previous papers have examined this application, but these either lack proof of concept or make unfeasible assumptions. This work expands current knowledge by simulating the Kalina cycle and comparing it to current pressurized water reactor Rankine cycles in order to identify which is more efficient. Prerequisite to the modeling is a simulation tool capable of modeling the thermodynamics of ammonia/water mixtures. Instead of using an existing program, a new one called Clearwater is used. This tool is …

Baseline Effects Of Lysophosphatidylcholine And Nerve Growth Factor In A Rat Model Of Sciatic Nerve Regeneration After Crush Injury, Ryan L. Wood, Keaton S. Karlinsey, Austin D. Thompson, Mark N. Rigby, Greggory D. Boatright, William G. Pitt, Beverly L. Roeder, Scott C. Steffersen, Alonzo D. Cook

Faculty Publications

Schwann cells play a major role in helping heal injured nerves. They help clear debris, produce neurotrophins, upregulate neurotrophin receptors, and form bands of Büngner to guide the healing nerve. But nerves do not always produce enough neurotrophins and neurotrophin receptors to repair themselves. Nerve growth factor (NGF) is an important neurotrophin for promoting nerve healing and lysophosphatidylcholine (LPC) has been shown to stimulate NGF receptors (NGFR). This study tested the administration of a single intraneural injection of LPC (1 mg/mL for single LPC injection and 10 mg/mL for multiple LPC injections) at day 0 and one (day 7), two …

Marangoni Flows During Nonsolvent Induced Phase Separation, Douglas R. Tree, Tatsuhiro Iwama, Kris T. Delaney, Joshua Lee, Glenn H. Fredrickson

Faculty Publications

Motivated by the much discussed, yet unexplained, presence of macrovoids in polymer membranes, we explore the impact of Marangoni flows in the process of nonsolvent induced phase separation. Such flows have been hypothesized to be important to the formation of macrovoids, but little quantitative evidence has been produced to date. Using a recently developed multifluid phase field model, we find that roll cells indicative of a solutal Marangoni instability are manifest during solvent/nonsolvent exchange across a stable interface. However, these flows are weak and subsequently do not produce morphological features that might lead to macrovoid formation. By contrast, initial conditions …

Nanoreactors: Strategies To Encapsulate Enzyme Biocatalysts In Virus-Like Particles, Joshua W. Wilkerson, Seung-Ook Yang, Parker J. Funk, Steven K. Stanley, Bradley Charles Bundy

Faculty Publications

Enzyme-mediated biocatalysis is generally more selective and environmentally friendly and requires less energy than chemocatalysis. However, factors such as temperature, acidity and the presence of proteases can negate enzyme activity. Encapsulation in virus-like particles is one promising method to mitigate these difficulties. Encapsulation also can be used to create multi-reaction nanoreactors that increase process efficiency by isolating reaction intermediates. To successfully encapsulate enzymes, a variety of methods involving both non-covalent and covalent interactions have been developed. Here we review promising virus-like particle encapsulation strategies, their advantages and remaining challenges.

Waste Vegetable Oil Properties With Usage And Its Impact On Artisan Soap Making, Jenalyn Thorpe

Undergraduate Honors Theses

This thesis examines the impact of vegetable oil usage in industrial and home settings on the properties of the vegetable oil and how its usage in soap affects the final product. Waste vegetable oil (WVO) is often used to make soap as a way to be more environmentally-friendly and create soap at a low cost in developing countries. Two settings are examined: home usage (i.e. short-term, small-scale usage) and industrial (i.e. long-term, almost continuous usage). This thesis found that lightly used oil (household use) had little to no impact on the quality of the oil, except for its scent. This …

Lyophilized Escherichia Coli-Based Cell-Free Systems For Robust, High-Density, Long-Term Storage, Mark Thomas Smith, Scott D. Berkheimer, Christopher J. Werner, Bradley Charles Bundy

Faculty Publications

Cell-free protein synthesis (CFPS) is a versatile tool for rapid recombinant protein production and engineering. One drawback of cell-free technology is the necessity to store the major components—cell extracts and energy systems—below freezing in bulky aqueous solutions. Here we describe simple methods for lyophilizing extracts and preparing powdered energy systems for CFPS. These techniques allow for high-density storage of cell-free systems that are more robust against temperature and bacterial degradation. Our methods have the potential to decrease storage expenses, allow for longer shelf-life of cell extracts at room temperature, and enable durable portable protein production technologies.

Streamlined Extract Preparation For Escherichia Coli-Based Cell-Free Protein Synthesis By Sonication Or Bead Vortex Mixing, Prashanta Shrestha, Troy Michael Holland, Bradley Charles Bundy

Faculty Publications

Escherichia coli-based cell extract is a vital component of inexpensive and high-yielding cell-free protein synthesis reactions. However, effective preparation of E. coli cell extract is limited to high-pressure (French press-style or impinge-style) or bead mill homogenizers, which all require a significant capital investment. Here we report the viability of E. coli cell extract prepared using equipment that is both common to biotechnology laboratories and able to process small volume samples. Specifically, we assessed the low-capital-cost lysis techniques of: (i) sonication, (ii) bead vortex mixing, (iii) freeze-thaw cycling, and (iv) lysozyme …

Nonlinear Model Predictive Control For A Managed Pressure Drilling With High-Fidelity Drilling Simulators, Junho Park

Theses and Dissertations

The world's energy demand has been rapidly increasing and is projected to continue growing for at least the next two decades. With increasing global energy demand and competition from renewable energy, the oil and gas industry is striving for more efficient petroleum production. Many technical breakthroughs have enabled the drilling industry to expand the exploration to more difficult drilling such as deepwater drilling and multilateral directional drilling. For example, managed pressure drilling (MPD) offers ceaseless operation with multiple manipulated variables (MV) and wired drill pipe (WDP) provides two-way, high-speed measurements from bottom hole and along-string sensors. These technologies have maximum …

Simulation And Experiments To Understand The Manufacturing Process, Microstructure And Transport Properties Of Porous Electrodes, Mohammad Mehdi Forouzan

Theses and Dissertations

Battery technology is a great candidate for energy storage applications. The need for high-performance and cost-effective batteries has motivated researchers to put much effort into improving battery performance. In this work, we attempt to understand the elements that affect the microstructure and performance of two battery systems. The first part of this work focuses on the investigation of transport and structural properties of porous electrodes in an alkaline electrolyte. A DC polarization method was deployed for tortuosity measurements. An apparatus was designed to flow specified current through and measure the voltage drop over the porous electrodes. Using a modified Ohm's …

New Flow Assurance System With High Speed Subsea Fiber Optic Monitoring Of Pressure And Temperature, John Hedengren, David Brower, J. Conrad Wilson, Geoff High, Karl Witherow

Faculty Publications

Subsea production control systems are instrumented to constantly monitor flowline pressure and temperature at key locations to prevent plugging and introduce mitigating control strategies. New fiber optic sensors with ruggedized construction and non-electrical components are subjected to accelerated aging tests and deployed in several installations with long service life. An overview of current progress with fiber optic technology is provided for fatigue monitoring, temperature, pressure, and strain sensing. Recent developments include improved service life, novel bonding methods, pipeline sensor station improvements, sensor calibration, and long-term fatigue analysis.

The latest advancements are validated on multiple installations on a subsea tieback in …

Special Issue: Combined Scheduling And Control, John Hedengren, Logan Beal

Faculty Publications

This Special Issue (SI) of Processes, “Combined Scheduling and Control,” includes approaches to formulating combined objective functions, multi-scale approaches to integration, mixed discrete and continuous formulations, estimation of uncertain control and scheduling states, mixed integer and nonlinear programming advances, benchmark development, comparison of centralized and decentralized methods, and software that facilitates the creation of new applications and long-term sustainment of benefits. Contributions acknowledge strengths, weaknesses, and potential further advancements, along with a demonstration of improvement over current industrial best-practice.

In Situ Uv-Visible Assessment Of Iron-Based High-Temperature Water-Gas Shift Catalysts Promoted With Lanthana: An Extent Of Reduction Study, Basseem B. Hallac, Jared C. Brown, Eli Stavitski, Roger G. Harrison, Morris D. Argyle

Faculty Publications

The extent of reduction of unsupported iron-based high-temperature water-gas shift catalysts with small (< 5 wt %) lanthana contents was studied using UV-visible spectroscopy. Temperature- programmed reduction measurements showed that lanthana content higher than 0.5 wt % increased the extent of reduction to metallic Fe, while 0.5 wt % of lanthana facilitated the reduction to Fe₃O₄. In situ measurements on the iron oxide catalysts using mass and UV-visible spectroscopies permitted the quantification of the extent of reduction under temperature-programmed reduction and high-temperature water-gas shift conditions. The oxidation states were successfully calibrated against normalized absorbance spectra of visible light using the Kubelka-Munk theory. The normalized absorbance relative to the fully oxidized Fe₂O₃ increased as the extent of reduction increased. XANES suggested that the average bulk iron oxidation state during the water-gas shift reaction was Fe^{+2.57 …}

Effects Of Ag Promotion And Preparation Method On Cobalt Fischer- Tropsch Catalysts Supported On Silica-Modified Alumina, Mahmood Rahmati, Baiyu Huang, Landon M. Schofield, Thomas H. Fletcher, Brian F. Woodfield, William C. Hecker, Calvin H. Bartholomew, Morris D. Argyle

Faculty Publications

A series of silver-promoted, 20 wt% cobalt Fischer-Tropsch synthesis (FTS) catalysts supported on an alumina modified with 5 wt% silica were prepared using two methods: traditional incipient wetness impregnation (IWI) and a new solvent deficient precipitation (SDP) technique. Catalysts containing silver promoter concentrations of 0.3, 0.6, 1.2, and 2.5 wt% were prepared using each of the two methods. Silver improved the reducibility of the cobalt significantly, lowering reduction temperatures by up to 100 C, and increasing the extent of reduction by up to 35%. Further, in both preparation methods, changing the silver loading altered the cobalt dispersion. The smallest Co …

Formation Of Deposits From Heavy Fuel Oil Ash In An Accelerated Deposition Facility At Temperatures Up To 1219 °C, Robert Laycock, Thomas H. Fletcher

Faculty Publications

Some industrial gas turbines are currently being fired using heavy fuel oil, which contains a small percentage of inorganic material that can lead to fouling and corrosion of turbine components. Deposits of heavy fuel oil ash were created in the Turbine Accelerated Deposition Facility (TADF) at Brigham Young University under gas turbine-related conditions. Ash was produced by burning heavy fuel oil in a downward-fired combustor and collecting the ash from the exhaust stream. This ash was then introduced into the TADF and entrained in a hot gas flow that varied from 1101 °C to 1219 °C. Sulfur dioxide was introduced …

Characterization Of Pyrolysis Products From Fast Pyrolysis Of Live And Dead Vegetation Native To The Southern United States, Mohammad-Saeed Safdari, Mahmood Rahmati, Elham Amini, Joel E. Howarth, Jansen P. Berryhill, Mark Dietenberger, David R. Weise, Thomas H. Fletcher

Faculty Publications

Prescribed burning (controlled burning) is used to decrease accumulation of combustible materials and reduce impact of uncontrolled wildland fires. Prescribed fires are often used to burn undergrowth in Southern forests of the United States. In order to improve prescribed fire application, accomplish desired fire effects, and limit potential runaway fires, an improved understanding of the fundamental processes related to combustion of heterogeneous fuel beds of live and dead fuels is needed. The initial processes of combustion involve pyrolysis and ignition. During this research, fast pyrolysis of 14 live and dead (biomass) plant species which are native to the Southern United …

Fire Behavior In Chaparral–Evaluating Flame Models With Laboratory Data, David R. Weise, Thomas H. Fletcher, Wesley Cole, Shankar Mahalingam, Xiangyang Zhou, Lulu Sun, Jing Li

Faculty Publications

Flame and mass loss data for chaparral, a mixture of shrub plants from the Mediterranean climate zone of southwestern North America, from five previously reported experiments were used to evaluate several published models relating flame characteristics to mass loss and heat release rates. These data are unique with fuel moisture content ranging from 0.36 to 0.94 (dry basis); the study used mass loss rates which included water loss. Fit of the data to Froude number correlations developed by Albini, Byram, Nelson and Thomas and heat release rate—flame length correlations by Heskestad, Zukoski, and Yuan/Cox for axisymmetric and line fires were …

Lab-Scale Observations Of Flame Attachment On Slopes With Implications For Firefighter Safety Zones, Jonathan R. Gallacher, Brad Ripa, Bret W. Butler, Thomas H. Fletcher

Faculty Publications

The Coanda effect is the phenomenon in which a jet entering quiescent fluid attaches to a nearby solid object due to inhibited entrainment of ambient fluid near the solid. Little is known about the influence of the Coanda effect on wildland fire behavior. Specifically, there is a lack of knowledge regarding how the flame attachment on slopes influences firefighter safety zone considerations in rugged terrain. This paper presents results for small-scale n-heptane pool fire experiments near a slope, showing how flame shape and heat flux are influenced by slope angle, slope boundary condition and distance from flame base. Flames near …

Effect Of Different Alumina Supports On Performance Of Cobalt Fischer-Tropsch Catalysts, Thomas H. Fletcher

Faculty Publications

Four identically-prepared 20 wt% cobalt/0.15 wt% ruthenium Fischer-Tropsch catalysts, supported on different aluminas, were synthesized by incipient wetness impregnation, characterized, and compared based on their performance under standard Fischer-Tropsch synthesis conditions. Three alumina supports were obtained from commercial sources (Sasol, St. Gobain, and Alfa Aesar), while the fourth was made using a published technique that included 5 wt% silica. The silica-stabilized alumina catalyst produced superior Fischer-Tropsch rates of 49 mmol CO/gcat h, compared to the other catalysts on the commercial supports with rates of 26–39 mmol CO/gcat h. The improved performance of the silica-stabilized alumina support compared to the commercially …

Development Of Bioreactors For Comparative Study Of Naturalattenuation, Biostimulation, And Bioaugmentation Ofpetroleum-Hydrocarbon Contaminated Soil, Mohammad-Saeed Safdari, Hamid-Reza Kariminia, Mahmood Rahmati, Farhad Fazlollahi, Alexandra Polasko, Shaily Mahendra, W Vincent Wilding, Thomas H. Fletcher

Faculty Publications

Bioremediation of soil and groundwater sites contaminated by petroleum hydrocarbons is known as a technically viable, cost-effective, and environmentally sustainable technology. The purpose of this study is to investigate laboratory-scale bioremediation of petroleum-hydrocarbon contaminated soil through development of eight bioreactors, two bioreactors for each bioremediation mode. The modes were: (1)natural attenuation (NA); (2) biostimulation (BS) with oxygen and nutrients; (3) bioaugmentation (BA)with hydrocarbon degrading isolates; (4) a combination of biostimulation and bioaugmentation (BS-BA). Total petroleum hydrocarbons (TPH) mass balance over the bioreactors showed about 2% of initial20,000 mg kg-soil−1TPH was removed by advection due to synthetic groundwater which was flow-ing …

Combined Noncyclic Scheduling And Advanced Control For Continuous Chemical Processes, Damon Petersen, Logan D. R. Beal, Derek Prestwich, Sean Warnick, John Hedengren

Faculty Publications

A novel formulation for combined scheduling and control of multi-product, continuous chemical processes is introduced in which nonlinear model predictive control (NMPC) and noncyclic continuous-time scheduling are efficiently combined. A decomposition into nonlinear programming (NLP) dynamic optimization problems and mixed-integer linear programming (MILP) problems, without iterative alternation, allows for computationally light solution. An iterative method is introduced to determine the number of production slots for a noncyclic schedule during a prediction horizon. A filter method is introduced to reduce the number of MILP problems required. The formulation’s closed-loop performance with both process disturbances and updated market conditions is demonstrated through …

A Molecular Simulation Study Of Antibody-Antigen Interactions On Surfaces For The Rational Design Of Next-Generation Antibody Microarrays, Derek B. Bush

Theses and Dissertations

Antibody microarrays constitute a next-generation sensing platform that has the potential to revolutionize the way that molecular detection is conducted in many scientific fields. Unfortunately, current technologies have not found mainstream use because of reliability problems that undermine trust in their results. Although several factors are involved, it is believed that undesirable protein interactions with the array surface are a fundamental source of problems where little detail about the molecular-level biophysics are known. A better understanding of antibody stability and antibody-antigen binding on the array surface is needed to improve microarray technology. Despite the availability of many laboratory methods for …