Chemical Engineering Commons^™

First Announcement Of 76th Annual Meeting Of The International Society Of Electrochemistry, International Society Of Electrochemistry (Ise)

Journal of Electrochemistry

No abstract provided.

Professor Yong Yang, The Editorial Board Member Of Journal Of Electrochemistry, Is Elected As A Fellow Of The Electrochemical Society, Editorial Office Of J.Electrochem.

Journal of Electrochemistry

No abstract provided.

Activity: Students Find Conceptual Errors In Ai Output, Janie Brennan

Generative AI Teaching Activities

Instructor asks ChatGPT questions related to a key concept to find one where ChatGPT has conceptual errors. Ask students to find the errors and explain them.

Dual Light Emission Of Cssni3-Based Powders Synthesized Via A Mechanochemical Process, Xuan Huang, Xiaobing Tang, Xiyu Wen, Yuebin Charles Lu, Fuqian Yang

Chemical and Materials Engineering Faculty Publications

Lead toxicity has hindered the wide applications of lead halide perovskites in optoelec- tronics and bioimaging. A significant amount of effort has been made to synthesize lead-free halide perovskites as alternatives to lead halide perovskites. In this work, we demonstrate the feasibility of synthesizing CsSnI3-based powders mechanochemically with dual light emissions under ambi- ent conditions from CsI and SnI2 powders. The formed CsSnI3-based powders are divided into CsSnI3-dominated powders and CsSnI3-contained powders. Under the excitation of ultraviolet light of 365 nm in wavelength, the CsSnI3-dominated powders emit green light with a wavelength centered at 540 nm, and the CsSnI3-contained powders …

Response To Replication Stress And Maintenance Of Genome Stability By Wrn, The Werner Syndrome Protein, David K. Orren, Amrita Machwe

Markey Cancer Center Faculty Publications

Werner syndrome (WS) is an autosomal recessive disease caused by loss of function of WRN. WS is a segmental progeroid disease and shows early onset or increased frequency of many characteristics of normal aging. WRN possesses helicase, annealing, strand exchange, and exonuclease activities and acts on a variety of DNA substrates, even complex replication and re- combination intermediates. Here, we review the genetics, biochemistry, and probably physiological functions of the WRN protein. Although its precise role is unclear, evidence suggests WRN plays a role in pathways that respond to replication stress and maintain genome stability particularly in telomeric regions.

Carbon-Based Nanocomposite Membranes For Membrane Distillation: Progress, Problems And Future Prospects, Chhabilal Regmi, Yuwaraj K. Kshetri, S. Ranil Wickramasinghe

Chemical Engineering Faculty Publications and Presentations

The development of an ideal membrane for membrane distillation (MD) is of the utmost importance. Enhancing the efficiency of MD by adding nanoparticles to or onto a membrane’s surface has drawn considerable attention from the scientific community. It is crucial to thoroughly examine state-of-the-art nanomaterials-enabled MD membranes with desirable properties, as they greatly enhance the efficiency and reliability of the MD process. This, in turn, opens up opportunities for achieving a sustainable water–energy–environment nexus. By introducing carbon-based nanomaterials into the membrane’s structure, the membrane gains excellent separation abilities, resistance to various feed waters, and a longer lifespan. Additionally, the use …

Activity Descriptors As Tools For Designing Highly Efficient Electrocatalysts For Water Splitting, Aya Gomaa

Theses and Dissertations

There is an uprising urge to design efficient, active, and durable catalysts to achieve sustainable hydrogen production. The unambiguity of which material should be used pushed the scientific community to devote enormous efforts in exploring different elements with different ratios on trial and error bases. However, the bridge between the theoretical calculation and the experiments introduced a new realm of designing efficient catalysts by introducing the concept of activity descriptors. In the first part of the thesis, the ability to convert waste stainless steel (SS) 316L meshes into highly efficient and durable oxygen evolution reaction (OER) catalysts is demonstrated. The …

A New Design Strategy For Sizes Of Polymer Gel Treatments Derived From A Comprehensive Assessment Of Their Case Histories, Munqith Aldhaheri, Abdullah Almansour, Na Zhang, Mingzhen Wei, Baojun Bai

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

The incentive to revive brownfield oil production extends the interest to apply polymer gel treatments in injection wells. Virtually, volumes of previous remediations implemented in similar reservoir types are used to size new jobs. Such an analogy-Based design procedure imposes a need to evaluate the most frequent designs for each reservoir type based on a comprehensive field survey. This survey provides a new treatment sizing strategy for polyacrylamide-polymer bulk gels by reviewing their field applications in 653 injection wells. the new strategy proposes using the average and most frequent gel volumes per reservoir type as an initial estimate of the …

Understanding The Impact Of Microplastic Contamination On Soil Quality And Eco-Toxicological Risks In Horticulture: A Comprehensive Review, N. P. Gayathri, Geena Prasad, Vaishna Prabhakaran, Vishnu Priya

Research outputs 2022 to 2026

The horticulture sector, essential for global food production, confronts significant challenges with prevalent pollutants, mainly microplastics. The presence of microplastics in the food chain has induced physiological stress and a multifactorial food safety concern. The complexity of the problem, arising from intricate interactions among microplastics, organisms, and ecosystems, poses a substantial challenge to food safety, necessitating an immediate strategic perspective due to the associated risks to human health and eco-toxicology. Significant knowledge gaps persist regarding their impact on terrestrial ecosystems, especially in horticulture. This study addresses the urgent need to comprehend the implications of microplastics on soil health, eco-toxicological risks, …

Molecular-To-Continuum Scale Modeling Of Aerosols: Atmospheric Application And Beyond, Ella Ivanova

Dissertations

Aerosol modeling is critical for various applications, such as climate forecasting, air quality, and human health impact assessment. During their lifetime, aerosols undergo a complex evolution, usually divided into several stages — formation, processing, transport, and removal — that occur on different scales. Thus, the choice of modeling methods depends on the stage considered. For example, certain stages of particle formation may require nano-scale modeling while aerosol-cloud interactions span from microscale to mesoscale. This study examines the modeling of aerosol behavior over a wide range of scales, from nano to microscale, with implications to mesoscale.

This dissertation focuses on two …

Comparison Of Ligands In Palladium-Catalyzed Electrochemical Allyl 4-Pyridinylation, Wei-Jie Ding, Chun-Hui Yang, Zhong-Tao Feng, Shi-Rong Lu, Xu Cheng

Journal of Electrochemistry

4-CN-pyridine is a widely applied 4-pyridinylation reagent for diverse transformations. Conventionally, the reaction proceeds via an open-shell radical cross-coupling pathway. Following our previous study, in this work, we report the Pd-catalyzed allyl 4-pyrinylation reaction under electrochemical conditions. The reaction proceeds via radical-polar crossover pathway in which the role of phosphine ligand in reactivity and selectivity was extensively investigated.

Recent Advance In Electrochemical Dehalogenative Deuteration, Peng-Fei Li, Guang-Sheng Kou, Li-Ping Qi, You-Ai Qiu

Journal of Electrochemistry

In recent years, the incorporation of deuterium atoms into organic compounds has emerged as a vital focus in the development of pharmaceutical molecules. This trend is driven by the increasing recognition of the significance of compounds containing deuterium atoms across various domains, including materials and biopharmaceuticals, where they have found widespread applications in mechanistic studies within the realms of chemistry and biology. Meanwhile, organic electrochemistry, as a relatively environmentally friendly catalytic mode with broad adaptability to redox reactions, has emerged as a crucial alternative to traditional halogen-deuterium exchange in the context of the reduction deuteration of halides. This approach circumvents …

Nickel-Catalyzed Α-Arylation Of Α-Cyanoacetates Enabled By Electrochemistry, Zi-Meng Li, Zhang-Jian Li, Anat Milo, Ping Fang, Tian-Sheng Mei

Journal of Electrochemistry

β-Amino acids have a wide range of applications in the field of pharmaceuticals. Utilizing a combination strategy of nickel catalysis and paired electrolysis, a catalytic α-arylation protocol of carbonyl compounds has been developed. This protocol affords various a-aryl-a-cyanoacetates, which can be reduced to high-value-added α-aryl-β-amino acids. The cross-coupling reaction of electron-deficient aryl bromides with a-cyanoacetates achieves the expected products with good yields and functional group compatibility under mild conditions. Excessive electron-richness in initial aryl bromides facilitates the self-coupling of desired products. DFT calculations confirm that the presence of electron-rich aryl substitutions decreases the reduction potentials of the product anions, making …

Synthesis Of Geopolymer Using Coal Fly Ash And Corn Stover, Anu Paneru

Master's Theses

The development of each nation is dependent on its infrastructure, and nations are competing with others in infrastructure, especially in the construction of roadways, since they play a vital role in the economic and social development of the nation. The conventional materials used for road construction are cement and asphalt, which pose significant environmental challenges. This thesis explores the potential of fly ash (FA) and corn stover (CS) in synthesizing geopolymer, as an alternative material for the construction of roads. The study examines the impact of FA and CS percentages and the particle sizes of CS on the compressive strength, …

Pet And Polyolefin Plastics Supply Chains In Michigan: Present And Future Systems Analysis Of Environmental And Socio-Economic Impacts, Utkarsh S. Chaudhari, Kamand Sedaghatnia, Barbara K. Reck, Kate Maguire, Anne T. Johnson, David Watkins, Robert M. Handler, Tasmin Hossain, Damon S. Hartley, Vicki S. Thompson, Alejandra Peralta, Jenny L. Apriesnig, David Shonnard

Michigan Tech Publications

Many actions are underway at global, national, and local levels to increase plastics circularity. However, studies evaluating the environmental and socio-economic impacts of such a transition are lacking at regional levels in the United States. In this work, the existing polyethylene terephthalate and polyolefin plastics supply chains in Michigan were compared to a potential future (‘NextCycle’) scenario that looks at increasing Michigan’s overall recycling rate to 45%. Material flow analysis data was combined with environmental and socio-economic metrics to evaluate the sustainability of these supply chains for the modeled scenarios. Overall, the NextCycle scenario for these supply chains achieved a …

Advancing Simultaneous Extraction And Sequential Single-Particle Icp-Ms Analysis For Metallic Nanoparticle Mixtures In Plant Tissues, Lei Xu, Xingmao Ma, John Yang, Joel G. Burken, Paul Ki-Souk Nam, Honglan Shi, Hu Yang

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Engineered Nanoparticles (ENPs) Have Been Increasingly Used in Agricultural Operations, leading to an Urgent Need for Robust Methods to Analyze Co-Occurring ENPs in Plant Tissues. in Response, This Study Advanced the Simultaneous Extraction of Coexisting Silver, Cerium Oxide, and Copper Oxide ENPs in Lettuce Shoots and Roots using Macerozyme R-10 and Analyzed Them by Single-Particle Inductively Coupled Plasma-Mass Spectrometry (ICP-MS). Additionally, the Standard Stock Suspensions of the ENPs Were Stabilized with Citrate, and the Long-Term Stability (Up to 5 Months) Was Examined for the First Time. the Method Performance Results Displayed Satisfactory Accuracies and Precisions and Achieved Low Particle Concentration …

Development Of An Experimentally Validated Computational Fluid Dynamics Model For A Pbi Membrane-Based Anhydrous Hcl Electrolyzer, Kris Likit-Anurak, Hunter R. Teel, Ishwor Karki, Ben I. Howard, Brian C. Benicewicz, Sirivatch Shimpalee, Benjamin H. Meekins

Faculty Publications

We report the development of an experimentally-validated computational fluid dynamics (CFD) model for simulation of an anhydrous HCl electrolyzer. The experimental data from 3 membrane variants was used to provide kinetic and membrane parameters for the model. The model not only accurately simulates overall electrolyzer performance, but it also provides key insights into the transport phenomena within the electrolyzer. The model allows simulation of experimental parameters like high HCl flowrates and increased cell pressure that pose a high safety risk to researchers. The model shows hotspots in the temperature distribution that will need to be addressed by flow field modification …

Analysis Of The Effect Of Different Surface Preparation Methods On Corrosion Resistance And Adhesion Strength Of Astm A36 Steel Substrate With Surface Tolerant Epoxy Paint As Coating Material, Irwan Wijaya Santoso, Daffa Aqila, Rini Riastuti, Rizal Tresna Ramadhani

Journal of Materials Exploration and Findings

In the industrial world, to extend the service life of materials, protection methods are carried out to slow down the material's corrosion rate. The protection method that is often used is the coating method. The coating method is a protection method by coating the substrate material using a coating material to prevent contact between the substrate material and the environment. In this research, the substrate material used is ASTM A36 steel and the coating material used is Surface Tolerant Epoxy paint. The independent variable used in this study lies in the surface preparation method which consists of: solvent cleaning, hand …

Synthesis And Analysis Of A Novel Magnetic Surfactant, Donovan Turpin

Honors Theses

Researchers in the University of Mississippi Chemical Engineering Department have suggested that chelation of a large magnetic transition metal, namely dysprosium, into the large polar head group of a surfactant could result in a magnetic surfactant. This project was aimed at synthesizing a surfactant with a large enough head group and negative charge (specifically EDTA) to support this ion and demonstrating that the chelation process was successful. If so, the molecule would ideally be capable of forming micelles which could extract oily substances from water using a strong magnet—possibly applicable to environmental crises like oil spills.

NMR analysis has suggested, …

Model To Demonstrate Effects Of Mass Transfer And Applied Current In An Electrolytic Cell, George Ankrah

Reviews, Analyses, and Instructional Studies in Electrochemistry (RAISE)

This study investigates the relationship between applied current and resulting cell potential in an electrolytic system, considering the transport of electroactive species. By applying Michael Faraday's laws of electrolysis and the Nernst-Planck equation, the behavior of electroactive species in diffusion-controlled systems with and without stirring is modeled. The plots demonstrate how stirring enhances ion transport and establishes a stable Nernst diffusion layer, affecting the kinetics of electrochemical reactions. Understanding these dynamics is crucial for optimizing electrolysis processes.

Review Of Cyclic Voltammetry Measurements For Uranium In Flinak Molten Salt, Jackson Ivory

Reviews, Analyses, and Instructional Studies in Electrochemistry (RAISE)

The electrochemical behavior of uranium FLiNaK molten salts is explored, focusing on cyclic voltammetry (CV) as a powerful tool for redox characterization and diffusion studies. Through a comprehensive review of recent research, the study highlights the significance of CV in understanding electrode kinetics, material compatibility, and process optimization in molten salt environments. The findings underscore the potential of FLiNaK molten salt reactors in advancing nuclear energy technologies, fuel processing, and waste management strategies. Collaborative interdisciplinary efforts are emphasized to address challenges and accelerate innovation in electrochemical methods for nuclear applications.

Model Of The Effect Of Voltage On Contact Angle In An Electrolytic Cell Reaction, Aaron Essilfie

Reviews, Analyses, and Instructional Studies in Electrochemistry (RAISE)

This paper investigates the hypothesis that the contact angle at the meniscus of an electrode-electrolyte can be altered during a redox reaction through the coupled understanding of electrowetting and capillarity rise. Recent studies in electrowetting have focused on dielectric surfaces but research on contact angle at the electrode-electrolyte surface is lacking. The study employs a basic electrolytic cell. By applying principles of electrowetting and capillary rise the research aims to understand the relationship between applied voltage and contact angle, to advancements in electrochemistry and microfluidics.

An Overview Of How To Measure The Kinetic Properties Of An Anode Material For The Chlorine Evolution Reaction, Cameron Vann

Reviews, Analyses, and Instructional Studies in Electrochemistry (RAISE)

The process of generating chlorine gas using electrolysis in aqueous systems is well established. However, a new process requires chlorine to be generated at high temperatures using molten salt. This harsh environment requires a new study of anode materials for the chlorine evolution reaction. Anode materials can be compared by their kinetic parameters, the transfer coefficient α and the exchange current i0. The basic theory of these properties as they relate to the chlorine evolution reaction has been detailed and an analysis method for finding these effective parameters has been shown and demonstrated.

Investigating The Impact Of Secondary Activation Time On The Adsorption Properties Of Activated Biochar For Arsenic Removal From Wastewater, Achyuth Bharadwaj Rayarao

Graduate Theses and Dissertations (2019 - present)

Biochar, a naturally occurring and renewable carbon material, becomes porous through activation. Activated biochar is an ideal candidate for use as an adsorbent. The objective of this study is to investigate whether activated biochar derived from Colorado soft pine serves as a better adsorbent and demonstrates enhanced adsorption capabilities after undergoing secondary physical activation at various activation times. The effect of secondary action time on physical adsorption properties drawn from the analysis of isotherm plots, surface areas and pore size patterns were examined by using a physisorption analyzer. Chemical structures were identified using both ultimate and proximate analyses, while porosity …

Enabling High-Rate Thermoplastic Composite Manufacturing Through Structure-Processing-Property Relationships Of Polyphenylene Sulfide, Lina Ghanbari

Dissertations

In this dissertation, relationships between polyphenylene sulfide (PPS) chain structure and melt processing parameters are linked to thermoplastic composite (TPC) properties and mechanical performance. Deviations from linear PPS structure and the formation of branching/crosslinked moieties upon exposure to TPC manufacturing steps presents an opportunity to systematically uncover the interdependencies of melt-state thermal history on polymer rheology, crystallization, crystal structure, and translate these properties to the continuum level. This work first explores unreinforced PPS and how the formation of non-linear chain architectures yield altered rheological states when held at melt processing temperatures. These hindered chains exhibit unconventional crystallization behavior and non-uniform …

Modeling Sex-Specific Changes In Myocardial Fibrosis, Grace Martin

Chemical Engineering Undergraduate Honors Theses

Heart disease the leading cause of death for both men and women in the United States. Cardiac fibrosis, or accumulation of extracellular matrix proteins in the heart, can occur after a heart attack and increase the risk for further complications. Current treatments for heart disease do not include extracellular matrix regulators, partly due to the complicated signaling network responsible for the production of these proteins. By using a computational model of the signaling network in cardia fibroblasts, the relationship between particular molecules and downstream extracellular matrix production can be examined.

Biological sex is an important factor for cardiac health and …

Improving Static Cold Storage Life Of The Human Heart Before Transplant, Juan Sebastian Rodriguez Paez

Theses and Dissertations

Organ storage and transportation are critical steps for the success of organ transplantation. Static cold storage (SCS) of hearts for heart transplantation (HTx) remains the standard approach. However, SCS may involve damage to the tissue resulting from extended hypothermic preservation, potentially affecting organ viability. More over, the temperature distribution on and within the heart is unknown during heart transplantation. Therefore, there is an interest to study different stages of the heart transplantation process towards determining the 3D temperature distribution on and within the heart. There could be a possibility of having a hypothermic injury in different parts of the heart …

Thermogravimetric Analysis And Chemical Kinetics Of Waste Tires, Mahir Mohammed Said

Tanzania Journal of Engineering and Technology (TJET)

The focus of this paper is to analyse the pyrolysis reaction of waste tires. The pyrolysis was studied experimentally using thermal and chemical kinetics. The tires were pyrolyzed using thermogravimetry at a temperature range of 200 to 600°C, with heating rates of 10, 20, and 50°C/min. The activating energy was observed to increase with increased temperature. The highest activating energy was 101.02 kJ/mol at a heating rate of 50°C/min.

Enhanced Post Deposition Annealing Conditions On The Fabrication Of High Quality Thermochromic Vanadium Dioxide Films, Nuru R. Mlyuka

Tanzania Journal of Engineering and Technology (TJET)

Sputter deposition of thermochromic VO2 thin films for smart window applications has been faced with several challenges including the need for high deposition temperature, extremely precise and narrow range of oxygen/argon flow ratio and target poisoning during sputtering. Deposition of VO2 at room temperature without oxygen followed by post-deposition annealing has been cited as one of the potential mitigations to the challenge. In this study, the effects of post-deposition annealing conditions on the structural, electrical and optical properties of VO2 thin films are reported. The films were prepared on soda lime glass substrates using DC magnetron sputtering of metallic vanadium …

Design And Optimization Of An Azeotropic Distillation Pilot Plant For The Production Of Pure Ethanol, Samwel V. Manyele

Tanzania Journal of Engineering and Technology (TJET)

This study aimed to design an azeotropic distillation plant using Aspen Plus® V10 software and determine optimal process conditions for producing pure ethanol greater than 95% from pre-concentrated near-azeotropic ethanol-water solution. The non-random two-liquid Redlich-Kwong thermodynamic model was the base method for property analysis and performance prediction. Modelling and simulation of the converged process were conducted for fixed column variables (R = 5, N = 12 and p = 1 atm). Plant operating parameters were varied in the range of 0 to 1 for the pre-heater vapour fraction, 2 to 10 for the column feed plates (NFP), 2 to 6 …