Chemical Engineering Commons^™

Application Of The Variational Fracture Model To Hydraulic Fracturing In Poroelastic Media, Chukwudi Chukwudozie

LSU Doctoral Dissertations

Hydraulic fracturing has persisted through the use of simple numerical models to describe fracture geometry and propagation. Field tests provide evidence of interaction and merging of multiple fractures, complex fracture geometry and propagation paths. These complicated behaviors suggest that the simple models are incapable of serving as predictive tools for treatment designs. In addition, other commonly used models are designed without considering poroelastic effects even though a propagating hydraulic fracture induces deformation of the surrounding porous media. A rigorous hydraulic fracturing model capable of reproducing realistic fracture behaviors should couple rock deformation, fracture propagation and fluid flow in the both …

Impacts Of Rock-Brine Interactions On Petrophysical Properties Of A Sandstone Reservoir, Utilizing Geochemical And Pore Network Modeling, Masoud Safari-Zanjani

LSU Doctoral Dissertations

Unfavorable consequences of geochemical reactions, such as calcite and silica scaling, in geothermal power plant surface facilities have been discussed in many recent studies. However, the impact of brine-rock interactions related to geothermal projects on reservoir properties has not been addressed fully. In this study, interactions between geothermal fluid and reservoir rocks in two fields located in Vermilion Parish, LA, and Chocolate Bayou, TX, are examined using geochemical modeling. The studied reservoir belongs to the Frio formation. In the geochemical models, the brine is cooled down to the estimated output temperature of a geothermal heat exchanger and re-equilibrated. Then, brine-rock …

Statistical Reservoir Characterization, Simulation, And Optimization Of Field Scale-Gas Assisted Gravity Drainage (Gagd) Process With Uncertainty Assessments, Watheq Jasim Mohammed Al-Mudhafar

LSU Doctoral Dissertations

Unlike the Continuous Gas Injection (CGI) and Water-Alternative Gas (WAG), the Gas Assisted Gravity Drainage (GAGD) process takes advantage of the natural segregation of reservoir fluids to provide gravity-stable oil displacement. The gas is injected through existing vertical wells to formulate a gas cap to allow oil and water drain down to the horizontal producer (s). Therefore, the GAGD process was implemented through immiscible and miscible injection modes to improve oil recovery in a sector of the main pay/upper sandstone member in the South Rumaila oil field, located in Iraq. A high-resolution geostatistical reservoir characterization model was constructed to model …

Modeling Churn And Annular Flow Regimes In Vertical And Near-Vertical Pipes With Small And Large Diameters, Erika Viana Pagan

LSU Master's Theses

This thesis presents an improved model for gas-liquid two-phase flow in churn and annular flow regimes for small- and large-diameter in vertical and near-vertical pipes. This new model assumes that a net liquid film moves upward along the pipe wall and gas phase moves upward, occupying the majority of the central part of the pipes, and forming a gas core, in both flow regimes. The model is validated using field and laboratory experimental data from several different studies from the literature, in terms of pressure along the wellbore or bottomhole pressure for field conditions (for high-pressure flows in long pipes, …

Expandable Proppants For Hydraulic Fracturing, Livio Yang Santos

LSU Master's Theses

Hydraulic fracturing is recognized as the primary technique to achieve economic oil and gas production from low permeability reservoirs like shale and tight-sand formations. One of the main challenges facing the oil and gas industry is maintaining the proppant functionality in the subsurface where replacement of proppant is only possible by expensive refracturing operations. Proppant crushing and proppant embedment have posed challenges for sustainable production from stimulated wells especially in soft and deep formations like Haynesville Shales. Experimental measurements show the strong impact of proppant stress and proppant embedment on reducing fracture conductivity. In this work, we introduce a new …

Design And Analysis Of Geothermal Wellbore Energy Conversion System Working On Zero Mass Withdrawal Principle, Ildar Akhmadullin

LSU Doctoral Dissertations

This project is sponsored by the Department of Energy of the United States and dedicated to development of electricity production from the low-enthalpy geothermal reservoirs. The prime interest are reservoirs that are characterized by low temperature of heat source located in deep saline aquifers with high permeable rock. Usually energy production from these resources are not economical by using a conventional binary power plant approach. The presented PhD work is a study of a new system that utilizes a single-well technology and working on supercritical power cycle (PC). The wellbore energy conversion system is operating with Zero Mass Withdrawal (ZMW) …

Simulation Studies For Relative Importance Of Unconventional Reservoir Subgrid Scale Physics Parameters, Yaakoub Youssef El Khamra

LSU Doctoral Dissertations

In this endeavor we attempt to better understand gas transport in shale gas reservoirs, specifically the impact and effects of different physical phenomena. We start by documenting the nature of the reservoirs and the need for accurate modeling of various physical phenomena in multiple interconnected continua. The physical phenomena of interest include non-linear Forchheimer flow, Knudsen diffusion in the form of slip "Klinkenberg" flow and adsorption/desorption. The numerical methods used in the reservoir simulator are also introduced, along with a derivation of the main equations used. Various verification and validation results are compared against manufactured and analytical solutions and finally …

Development Of Single-Well Gas Assisted Gravity Drainage Process For Enhanced Oil Recovery, Bikash Deep Saikia

LSU Doctoral Dissertations

EOR application in prolific deepwater Gulf of Mexico (DGOM) reservoirs has remained a challenge. Exorbitant well cost (>200M$) precludes having extensive injection patterns and very characteristics of the reservoirs themselves are partly to blame for negligible EOR activity in DGOM. We have been able to develop and demonstrate a novel design in the form of Single Well – Gas Assisted Gravity Drainage (SW-GAGD) process, which is potentially cost effective, at the same time ensuring very high oil recoveries. In this design, a single well acts as an injector as well as a producer, thereby minimizing well cost. The efficacy …

Modelling Hydraulic Fracturing Propagation In Heterogeneous Reservoirs Using Cohesive Zone Methods, Miguel Alejandro Gonzalez-Chavez

LSU Doctoral Dissertations

The recent success in exploiting low permeability shale reservoirs has heavily relied on hydraulic fracturing to produce hydrocarbons economically in disadvantaged reservoir conditions. Although horizontal drilling significantly increases the contact area between the wellbore and the reservoir, the objective of hydraulic fracturing is set on creating further expanded conductive flow paths into the reservoir. This research uses cohesive zone method to numerically simulate hydraulic fracture propagation in the presence of natural fractures in two- and three-dimensional model. The Cohesive element approach limits fracture propagation to some predefined paths. However, in highly fractured formations since hydraulic fractures are growing through a …

Application Of The Finite Element Method To Solve Coupled Multiphysics Problems For Subsurface Energy Extraction, Milad Ahmadi

LSU Doctoral Dissertations

Fractures are a source of extra compliance in the rock mass. Fracture compliance can estimate the fracture roughness and the type of fluid filling the fracture. The focus of this research study in chapter 2 is to illustrate how the compliance ratio of rough fractures can diverge from the compliance ratio of smooth fractures. The imperfect interface of the fracture is modeled with saw-tooth-like structures. The defined saw-tooth-like structures of contact asperities impose an in-plane asymmetry in the shear direction. The compliance ratio of the rough fracture is larger than the compliance ratio of the smooth fracture. Interlocking and riding …

Modeling Of Gas Production From Shale Reservoirs Considering Multiple Transport Mechanisms, Chaohua Guo, Mingzhen Wei, Hong Liu

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Gas transport in unconventional shale strata is a multi-mechanism-coupling process that is different from the process observed in conventional reservoirs. In micro fractures which are inborn or induced by hydraulic stimulation, viscous flow dominates. And gas surface diffusion and gas desorption should be further considered in organic nano pores. Also, the Klinkenberg effect should be considered when dealing with the gas transport problem. In addition, following two factors can play significant roles under certain circumstances but have not received enough attention in previous models. During pressure depletion, gas viscosity will change with Knudsen number; and pore radius will increase when …

Experimental Study And Numerical Simulation Of Hydraulic Fracturing Tight Sandstone Reservoirs, Chaohua Guo, Jianchun Xu, Mingzhen Wei, Ruizhong Jiang

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Unconventional tight sandstone reservoirs have been developed during recent years and a large number of multi-stages fractured horizontal wells have been drilled to stimulate reservoir performance. However, fluid flow in low permeability porous media no longer obeys Darcy's law and instead conforms to low-velocity non-Darcy flow. Most commercial numerical simulation software for multi-stage fractured horizontal well development may cause inaccuracy in simulating performance of tight sandstone reservoirs. In this paper, the investigation of existing conditions of low velocity non-Darcy flow for oil flow in irreducible water saturation tight sandstone cores was conducted and discussed through lab-experiments. And existence of low …

Investigating The Feasibility Of Nitrogen Injection In Turner Valley, Igor Koracin

Graduate Theses & Non-Theses

The Turner Valley gas and oil field was discovered in 1913 and it was one of the main plays that sparked the growth of the petroleum industry in Canada. The Turner Valley formation is a Mississippian reservoir located at a mean depth of 7,546 feet. It is a heavily faulted field, 25 miles in length with an average width of 2 miles and is located 30 miles south-west of Calgary. It is an asymmetric anticlinal structure cut by the y axis with parallel thrust and normal faults.

Due to its early inception and the lack of resource development regulations, Turner …

Modifying Fracture Conductivity Testing Procedures, Kent Blair

Graduate Theses & Non-Theses

Fracture conductivity testing is a measure of how proppant will perform downhole when injected. The current American Petroleum Institute (API) procedure for conductivity testing produces results that are difficult to replicate. In one case three commercial labs tested the same sample of proppant, the results varied between labs and the highest spread in data had an 80% variation (Anderson, 2013). The goal of this thesis is to investigate cell loading procedures that reduce the variation in laboratory results.

A variety of cell loading techniques were tested including Hoke cylinder injection, guar injection, and cell vibration. Hoke cylinder loading was determined …

Oil Recovery In Low Temperature And Salinity Reservoir Rock Using Anionic And Anionic/Cationic Surfactant Formulations, Alec D. Bokhart, Ryan Mulvenna, Bryan Boudouris, Rituraj Borgohain, Cliff Johnston

The Summer Undergraduate Research Fellowship (SURF) Symposium

As oil reserves are being depleted in the United States, there is an increasing need to recover the trapped oil in the reservoir rock which accounts for up to 60% of the total oil available. This oil may be recovered using chemical enhanced oil recovery (EOR) techniques. In our case study, we investigated viable EOR surfactant/polymer formulations for conditions conducive to high efficiency oil recovery in ultra-low salinity, low temperature, and high hardness reservoirs. Formulations were screened for Winsor Phase I (microemulsions) or Winsor Phase III (bicontinuous emulsions),: both of which are conducive to high efficiency oil recovery. Strong emulsion …

A More Superior Preformed Particle Gel With Potential Application For Conformance Control In Mature Oilfields, Paul Tongwa, Baojun Bai

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

The present work presents a nanocomposite preformed particle gel for conformance control in mature oilfields. This product was observed to have a better performance than conventional hydrogels without nanomaterials. Preformed particle hydrogel was designed by the reaction of monomer, initiator, crosslinker, additives, and calcium montmorillonite nanomaterial, whereas conventional hydrogel is designed from just monomer, initiator, crosslinker and additives. The presence of nanomaterial in hydrogel design affords it tremendous improvement in nanocomposite gel properties and behavior compared to conventional hydrogels without any nanomaterial. Additionally, swelling performance, post-degraded gel viscosity, and long-term thermal resistance of nanocomposite gel increased by several orders of …

The Production Of Biobutanol From Biomass Via A Hybrid Biological/Chemical Process, Thomas Melvin Potts

Graduate Theses and Dissertations

Biobutanol use as a fuel began in the late 19th century. Problems remain in economic viability. A review of the state of the art and need for technical advances is presented.

The technical potential of producing biofuel from a naturally occurring macroalgae was studied. The algae grow in Jamaica Bay, New York City, in contaminated water. The process consisted of mechanical harvesting, drying, grinding, and acid hydrolysis to form an algal sugar solution. Clostridium beijerinckii and C. saccharoperbutylacetonicum were used in an acetone butanol ethanol (ABE) fermentation to make butanol. Fermentation was followed by distillation Butanol concentrations during fermentation reached …

Numerical Modeling Of Fluid Migration In Hydraulically Fractured Formations, Toyin Christie Aseeperi

Graduate Theses and Dissertations

Economic production from low permeability shale gas formations has been made possible by the introduction of horizontal drilling and hydraulic fracturing. To ensure that gas production from these formations is optimized and carried out in an environmentally friendly approach, knowledge about the patterns of gas flow in the shale reservoir formation is required. This work presents the development of a shale gas reservoir model for the characterization of flow behavior in hydraulically fractured shale formations. The study also seeks to develop more computationally efficient approaches towards the modeling of complex fracture geometries. The model evaluates the migration patterns of gas …

Life-Cycle Energy And Ghg Emissions Of Forest Biomass Harvest And Transport For Biofuel Production In Michigan, Fengli Zhang, Dana M. Johnson, Jinjiang Wang

College of Business Publications

High dependence on imported oil has increased U.S. strategic vulnerability and prompted more research in the area of renewable energy production. Ethanol production from renewable woody biomass, which could be a substitute for gasoline, has seen increased interest. This study analysed energy use and greenhouse gas emission impacts on the forest biomass supply chain activities within the State of Michigan. A life-cycle assessment of harvesting and transportation stages was completed utilizing peer-reviewed literature. Results for forest-delivered ethanol were compared with those for petroleum gasoline using data specific to the U.S. The analysis from a woody biomass feedstock supply perspective uncovered …

Investigating A Pilot Area In The Williston Basin Three Forks Formation To Determine The Optimal Inter-Well Spacing And Hydraulic Fracture Length To Maximize Economic Recovery, Adhikeshavan Ravee

Graduate Theses & Non-Theses

The objective of this work is to determine optimal inter-well spacing and hydraulic fracture length of the Three Forks assets in the Williston Basin operated by SM Energy. SM Energy is an independent exploration and production company with operations across North America, mainly in Texas and North Dakota. SM Energy recently switched to infill drilling development in their North Dakota assets and is interested in knowing the economically optimal number of wells that can be drilled per two-section drilling unit.

A simulation approach was taken in this research to address SM Energy’s issue. For research purposes a small pilot area …

Correlating Petrophysical Calculations From Density Logs To Production Trends In The Elm Coulee Field, Montana, Colton Mall

Graduate Theses & Non-Theses

This thesis investigates correlations between estimated upper Bakken total organic carbon (TOC) and production data in the Elm Coulee field, and tests two hypotheses for defining simulation model properties with the results. The purpose of this research is to investigate potential correlations between upper Bakken TOC and production and exploit any correlations to develop better methods for defining simulation model properties. This may reduce time necessary to history match production from an Elm Coulee model and help to explain the production variability. The study area is in Montana townships 24N-57E, 23N-57E, and 24N-55E. Public domain completion and production data for …

Microfracture And Surfactant Impact On Linear Cocurrent Brine Imbibition In Gas-Saturated Shale, Yongpeng Sun, Baojun Bai, Mingzhen Wei

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

During and after hydraulic fracturing, fluid-shale interaction has a prominent impact on liquid retention and thus on gas phase permeability and gas productivity. By providing a low surface tension or wettability alteration, surfactants are widely used to decrease liquid retention after fracturing. To evaluate the liquid intake of a rock sample, an imbibition experiment is commonly used, especially when it is treated by a surfactant. However, conventional imbibition experiments with gas shale could not quantitate the imbibition behaviors as it does with conventional rocks because of the low porosity and extremely low permeability of gas shale. In this paper, a …

Separation Of The Petroleum System, Ali Ibrahim Neamah

The Hilltop Review

This study discusses the overall process of crude oil separation as well as the necessary equipment used in the process. Also discussed and analyzed are potential issues seen in the crude oil extraction process. Reasons why these operation problems may occur are analyzed as well as treatment options for such occurring issues are discussed for employees and students alike. This research is based off of personal involvement at the Nasiriyah Degassing Station located in Dhi Qar, Iraq.

Numerical And Field Data Analysis Of Drill Stem Vibration, Mohammed Fayez Al Dushaishi

Doctoral Dissertations

"Drill stem vibration is a major cause of premature failure of drill stem components and drilling inefficiency. In severe cases, drill stem vibration may lead to wellbore instability that could lead to increased operational cost. Drill stem vibrations are affected by design decisions and the drilling environment. Examples are; bottom hole assembly configurations, selection of operational parameters, and frequent changes in lithology. Vibration modeling, analysis of vibration data, and specialized vibration reduction tools are methods in use to prevent and mitigate severe vibrations.

A drill stem vibration model was created using nonlinear strain formulation which couples the axial, lateral and …

Coalescence-Induced Jumping Of Droplet: Inertia And Viscosity Effects, Samaneh Farokhirad, Jeffrey F. Morris, Taehun Lee

Publications and Research

The problem of coalescence-induced self-propelled jumping of droplet is studied using three-dimensional numerical simulation. The focus is on the effect of inertia and in particular the effect of air density on the behavior of the merged droplet during jumping. A lattice Boltzmann method is used for two identical, static micro-droplets coalescing on a homogeneous substrate with contact angle ranging from 0◦ to 180◦. The results reveal that the effect of air density is significant on detachment of the merged droplet from the substrate at the later stage of the jumping process; the larger the air density, the larger the jumping …

Transition States And Modeling For Co9s8/Mos2 Catalysis, Gabriel Angel Gonzalez

Open Access Theses & Dissertations

Transition state computational studies of the sulfur removal from dibenzothiophene (DBT) molecule have herein been performed considering the Co9S8/MoS2 interface existing on unsupported Co/MoS2 catalysts. The linear synchronous transit (LST) and quadratic synchronous transit (QST) methods integrated in a density functional theory (DFT) program such as Dmol3 were used for the calculations of energy barriers of the transition states. Three different configurations present on the Co9S8/MoS2 interface have been envisaged as possible catalytic sites: sulfur-sulfur (S, S) sites, and molybdenum-sulfur (Mo, S) and molybdenum-molybdenum (Mo, Mo) edge sites. This study revealed that the (Mo, Mo) edge site is the most …

Investigating New Accident Causation, Risk Assessment, And Mitigation Strategy Selection Tools In The Petroleum Industry, Mohammad A. Alkazimi

Doctoral Dissertations

"The inherent complexity of the processes and the volatile nature of petroleum products compel the petroleum industry to continually seek and develop tools and techniques to identify, evaluate, and mitigate potential risks that can negatively impact their process operations. Additionally, government agencies and nonprofit professional societies guide the petroleum industry with regulatory guidelines, standards, and recommended best practices. The industry and these agencies and societies work to improve operational management, to ensure safe working conditions, and to minimize risk of all kinds, so that if failures occur, damage is contained within tolerable limits (Health and Safety Executives, 2013).

The currently …

Particle Gel Propagation And Blocking Behavior Through High Permeability Streaks And Fractures, Abdulmohsin Imqam

Doctoral Dissertations

Water channeling, one of the primary reservoir conformance problems, is caused by reservoir heterogeneities that lead to the development of high-permeability streaks and fractures. These streaks and fractures prevent large amounts of oil from being recovered. The ultimate objective of this research was to provide comprehensive insight into designing better particle gel treatments intended for use in large openings, including open fractures, high permeability streaks, and conduits to increase oil recovery and reduce water production.

An intensive laboratory study was conducted to better understand the injection and placement mechanisms of millimeter and micron size preformed particle gels (PPGs) through thief …

Analysis Of Production And Pressure Data To Characterize The Performance Of Oil And Gas Reservoirs, Abuagila Ramadan Elgmati

Doctoral Dissertations

"Production data analysis is an important tool for estimating important reservoir parameters. In particular, determining the average reservoir pressure (p_av) and tracking its change with time is critical to analyzing and optimizing reservoir performance. The traditional method for determining p_av involves pressure buildup tests. A direct method for estimating (p_av) from flowing pressures and rate data is available. However, the method is for an idealized case that assumes constant production rate during pseudo steady-state (PSS) flow, which is not generally true for real wells. This research extends that approach so that it can …

Evaluation Of Millimeter-Sized Preformed Particle Gel For Conformance Control Treatments Using Simple Models, Ali Abdulmohsen Al Brahim

Masters Theses

Millimeter-sized preformed particle gels (PPGs) have been successfully used to tackle the high-permeable zones, fractures and channels in mature oilfields for conformance control improvement. PPGs can significantly reduce the permeability of abnormal fractures and divert injected water to the low permeable zones where hydrocarbon was not swept by previous water flooding. Due to the irregularity of PPGs in shapes after swollen, their strength cannot be easily measured using the conventional methods. Therefore, the open hole screen plate models with various hole diameters and density were designed to establish a simple technique that can be used to measure the strength of …