Chemical Engineering Commons^™

Parametrization Of Fluid Models For Electrical Breakdown Of Nitrogen At Atmospheric Pressure, Shirshak K. Dhali

Electrical & Computer Engineering Faculty Publications

In the transient phase of an atmospheric pressure discharge, the avalanche turns into a streamer discharge with time. Hydrodynamic fluid models are frequently used to describe the formation and propagation of streamers, where charge particle transport is dominated by the creation of space charge. The required electron transport data and rate coefficients for the fluid model are parameterized using the local mean energy approximation (LMEA) and the local field approximation (LFA). In atmospheric pressure applications, the excited species produced in the electrical discharge determine the subsequent conversion chemistry. We performed the fluid model simulation of streamers in nitrogen gas at …

Reducing Food Scarcity: The Benefits Of Urban Farming, S.A. Claudell, Emilio Mejia

Journal of Nonprofit Innovation

Urban farming can enhance the lives of communities and help reduce food scarcity. This paper presents a conceptual prototype of an efficient urban farming community that can be scaled for a single apartment building or an entire community across all global geoeconomics regions, including densely populated cities and rural, developing towns and communities. When deployed in coordination with smart crop choices, local farm support, and efficient transportation then the result isn’t just sustainability, but also increasing fresh produce accessibility, optimizing nutritional value, eliminating the use of ‘forever chemicals’, reducing transportation costs, and fostering global environmental benefits.

Imagine Doris, who is …

Combined Risk Based Inspection And Fault Tree Analysis For Repetitive 3-Phase Line Piping Leakage At West Java Offshore Topside Facility, Dona Yuliati, Akhmad Herman Yuwono, D. Rizal Asral, Donanta Dhaneswara

Journal of Materials Exploration and Findings

Hydrocarbon releases might result in serious consequences in various aspects. In addition to the contribution to environmental pollution, repetitive leakages need high repair costs. This study aim is to minimize potential repetitive leakage for other typical 3-phase piping systems. We conducted the risk assessment by adopting Risk Based Inspection (RBI) API 581 to identify risk level, calculating piping lifetime, recommended inspection plan and mitigations. The most relevant root causes can be obtained through quantitative Fault Tree Analysis (FTA). Observation and investigation was taken from eight 3-phase piping systems that experienced repetitive leakages. It has been found that the risk level …

Nitrogen Gas Quenching Pressure Effect On Bs S155 Alloy Steel In Vacuum Furnace, Agus Mulyadi Hasanudin, Eddy Sumarno Siradj

Journal of Materials Exploration and Findings

The production of metal and alloy products requires the use of heat treatment, when during the heat treatment process, quenching is a crucial step. The quenching medium can be anything from water, a salt bath, oil, air and gas. In a vacuum furnace, pressurized gas, most frequently nitrogen (N₂) gas, serves as one of the quenching mediums. One of the drawbacks of the quenching process is the distortion and dimensional change of the parts. This paper aims to investigate the influence of nitrogen gas quenching pressure on the distortion and dimensional change of aerospace actuator gear planet parts …

Isolation And Characterization Of Caffeine-Degrading Bacteria From Coffee Plantation Areas In Malaysia, Elvina Clarie Dullah, Mohd Fazli Farida Asras

Makara Journal of Technology

Decaffeination by microbial degradation is currently the most optimal and low-cost approach, involving only microbial cells and/or their enzymes. The bacterium was characterized using a series of biochemical tests. Positive results were obtained from carbohydrate fermentation, citrate utilization, and catalase tests, while negative results were obtained from Voges-Proskauer (VP) and indole tests. Three different caffeine concentrations of 0.25%, 0.4%, and 2% were tested and measured through Gas Chromatography-Mass Spectrophotometry (GC-MS) analysis. The highest caffeine reduction (89.25%) was found when 0.25% caffeine was used in the media. Only a small amount of caffeine was reduced to 0.4% and 2%, with 34.78% …

Optimization Of The Building Envelope And Roof Shading To Reduce The Energy Consumption Of College Low-Rise Buildings In Indonesia, Nasruddin Nasruddin, Azimil Gani Alam, Mohammad Imroz Sohel

Makara Journal of Technology

Energy consumption in buildings is a crucial concern globally, prompting researchers to explore innovative solutions to mitigate its impact. This study investigates the optimization of building envelopes and roof shading systems of existing buildings in Indonesia to realize notable energy savings. Multiple scenarios were explored, with modifications to building envelopes and roof shading, highlighting the overall thermal transfer value as a key parameter. Using EnergyPlus simulations, the efficacy of natural ventilation in corridors and roof shading modifications was assessed in reducing energy consumption. The findings revealed that renovating existing buildings by optimization of the building envelope and roof shading by …

The Role Of Interactive Spaces In Enhancing Social Interaction Of Children In Orphanage Institutions, Zainab Khalid Rashad Al Khafaji, Shamael M. W. Al Dabbagh

Al-Esraa University College Journal for Engineering Sciences

The child who moves to an environment outside his family environment, suchas orphanage institutions because of the loss of one or all of his family members, itis obvious that he feels a kind of alienation and isolation from his peers and a loss ofa sense of interaction and communication with society, so it is possible to mitigatethis feeling by promoting diversity in interactive activities within the internal spacesof the orphanage institutions and at the neighborhood level, the research problemwas represented by "the lack of clarity in the nature of knowledge aboutthe role of of interactive spaces in enhancing social interaction …

Environmental Footmark And Its Effects On The Sustainability Of Towns, Ali Abdul Samea Hameed

Al-Esraa University College Journal for Engineering Sciences

The Ecological Footmark (EF) is one of the utmost recent and important criteria for assessing the capacity of the population to uphold a life sustainable way. It tests the extent which the indicators have an influence on the natural resources (NR) of the ecosystem such as forestry, water bodies, agricultural lands, pastures, CO2, and properties for construction purposes. This footmark was utilized to evaluate the use of NR to the capacity of the land for regeneration. This research paper discusses the theoretical conceptual component of the EF framework and plans regarding issues related to the environment. The environmental image (EI) …

The Effects Of Urban Fragmentation / Analysis Of The Causes And Challenges In The City Structure, Seemon Matte Abbo, Inaam Amin Albazzaz

Al-Esraa University College Journal for Engineering Sciences

Fragmentation is a fundamental term in the history of critical urban thought,yet the product of fragmentation is manifested in fragments. Urban fragmentationis used to describe the phenomenon that occurs when the urban environment isbroken up into smaller units or dispersed areas. This means that cities becomefragmented rather than cohesive and integrated. This disintegration can be the resultof various factors such as poor planning, lack of infrastructure, different land uses,and social dispersion. This research addresses the problem of urban fragmentationas one of the challenges facing the urban structure of cities, and clarifies the mostimportant factors affecting the city structure during the …

A Review: Special Types Of Concrete Used In Structures, Reem Hatem Ahmed, Mohammed Mosleh Salman

Al-Esraa University College Journal for Engineering Sciences

The term “special” possesses inherent significance and is utilized in this context to denote the distinctive attributes characteristic of concrete. The term “special” connotes enhanced strength, durability, and solidity in concrete. The production of specialized concrete involves the incorporation of distinct components via specific procedures following specific criteria. Specialized concrete is required to construct unique structures such as power plants, offshore buildings, docks, and airports. Each of these unique structures is essential for survival in harsh conditions, including sulfate, chemical, acid, and chloride attacks, as well as other surface characteristics. Concrete is a versatile material that exhibits good compressive strength …

The Role Of Young Architects As Entrepreneurship Generational Units In Shaping The Future Of Architecture, Attaa H. Al Obaidi, Anwar. S. Al-Qaraghuli

Al-Esraa University College Journal for Engineering Sciences

Youth are the pillar of nations and the secret of their renaissance, thebuilders of their civilization and the line of defense, the main participants inbasic planning processes, and the agents of change to build a world that iscompatible with the aspirations of future generations. This applies to the field ofarchitecture in terms of the importance of young architects in shaping it underthe challenges it faces, which impose interaction in a manner commensuratewith the emerging requirements and needs. This research is based on theconsideration that young architects are an integrated phenomenon thatcontributes to shaping architectural production according to the data of …

Using Artificial Intelligence To Diagnose Demented In The Elderly, Ohood Fadil Alwan

Al-Esraa University College Journal for Engineering Sciences

In addition to possible other symptoms, memory loss and impairment are the hallmarks of Demented or Alzheimer’s disease (AD). Despite the fact that dementia is incurable and has a significant negative impact on patients' lives, an early diagnosis can help start the right treatment and prevent additional brain damage. Over the years, machine learning techniques have been used to classify AD; nevertheless, the efficacy of the results depends on the use of multi-step classifiers and manually created features. Thanks to recent advances in deep learning, patterns may now be classified using neural networks' final stage. In order to diagnose dementia …

Risk Detection Of Gestational Diabetes In Early Pregnancy Depend On Artificial Neural Network, Sanaa Hammad Dhahi

Al-Esraa University College Journal for Engineering Sciences

Early prediction of gestational diabetes mellitus (GDM) risk is particularly important because it may enable more effective interventions and reduce cumulative maternal and fetal injury. The aim of this study is to develop machine learning (ML) models for early prediction of GDM using widely available variables, facilitating early intervention, and enabling the application of prediction models in settings where more complex tests are not accessible. In this paper, an artificial neural network (ANN) was used to detect the risk of gestational diabetes. A global dataset was used to collect clinical and experimental data from pregnant women and people with diabetes …

Impact Of Merging Basalt Fibers With Various Types Of Concrete And The Factors Affecting Them: A Review, Adil M. Jabbar, Lubna S. Dankha

Al-Esraa University College Journal for Engineering Sciences

This paper reviews effecting of blending basalt fibers into concreteon mechanical properties, ductility, and toughness. Based on concretecomponents, the perfect basalt fiber percentage can differ and is influencedby factors like fiber length, w/c ratio, and age. The beneficial basalt fiberspercentage is lower than that of steel fibers. Even with a low concentrationof basalt fibers, concrete tensile and flexural strength can be improved moreeffectively than a higher amount of steel fibers. As the amount of basaltfiber increases, the mix workability decreases. Additionally, the flow abilitymay drop slightly as the length of the fibers increases. Adding basalt fiber toconcrete can minimize drying …

Air-Jet Bioprinting Of Stem Cell-Encapsulated Alginate Micro-Droplets For Organoid Biomanufacturing, Mirabella B. Stump

Electronic Theses and Dissertations

Biomanufactured 3D-organoids show promise for modeling and treating various conditions, particularly insulin-dependent diabetes mellitus (type-1 diabetes). Pancreatic islet organoids serve as sustainable sources of insulin-producing β-cells, potentially restoring insulin regulation in patients and providing a long-term solution for diabetes. Hydrogel droplet printing is an emerging technique in regenerative medicine due to its advantageous tunability and biocompatibility; however, challenges of consistency, quality control, and scalability persist. To address these issues, we developed a novel air-jetting based droplet bioprinting system for the generation of monodispersed alginate micro-droplets. The objective of this project was to incorporate human induced pluripotent stem cells (hiPSCs) into …

Clean Energy & Sustainable Environment By Carbon Dioxide Mitigation Strategies, Md Fahim Shahriar

Mechanical Engineering Theses

Dissolution trapping is one of the most dominant mechanisms for secure storage of CO₂ injected in porous subsurface formations saturated with brine. This study uses a 2D visual Hele-Shaw cell to investigate and visualize the impact of CO₂ injection locations, reservoir dipping angle, permeability heterogeneity, and brine with different initial ionic concentrations on the density-driven convection during CO₂ dissolution (Chapter 2). Also, the role of complex heterogeneity, i.e., irregular permeability distribution in CO₂ dissolution, is investigated using a novel experimental approach to create medium permeability heterogeneity in Hele-Shaw cells (Chapter 3). We observed that the presence …

Characterization Of Interlayer Laser Shock Peening During Fused Filament Fabrication Of Polylactic Acid (Pla), Fabien Denise

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

The field of additive manufacturing (AM) has gained a significant amount of popularity due to the increasing need for more sustainable manufacturing techniques and the adaptive development of complex product geometries. The problem is that AM parts routinely exhibit flaws or weaknesses that affect functionality or performance. Over the years, surface treatments have been developed to compensate certain flaws or weaknesses in manufactured products. Combining surface treatments with the modularity of additive manufacturing could lead to more adaptable and creative improvements of product functions in the future. The current work evaluates the feasibility of pursuing a new research axis in …

Numerical Investigations Of Sco2 Compressor Aerothermodynamics Using A Streamline Curvature Based Throughflow Method, Victor Quintanilla

UNLV Theses, Dissertations, Professional Papers, and Capstones

Supercritical carbon dioxide (sCO₂) has emerged as a promising working fluid for the Brayton power cycle, offering enhanced efficiency due to the high density and low viscosity of carbon dioxide (CO₂) near the critical point. A critical component of the sCO₂ Brayton cycle is the turbomachinery, namely the compressor, which significantly contributes to the efficiency enhancement in the sCO₂ Brayton cycle owing to reduced compression work requirements. Its primary function involves elevating the fluid's pressure, effectively priming it for the subsequent heat addition process from a thermal energy source. However, despite its advantages, challenges …

The Effects Of Engineering Summer Camps On Middle And High School Students’ Engineering Interest And Identity Formation: A Multi-Methods Study, Timothy Robinson, Adam Kirn, Jenny Amos, Indira Chatterjee

Journal of Pre-College Engineering Education Research (J-PEER)

This multi-methods study explores changes in engineering interest and identity of middle and high school students (n = 79) attending introductory-level engineering summer camps at a large western land grant university. Middle school is a critical time when student interest, identity, and subsequently career choice begin to emerge and hence it is important that at this age students are given accurate information about engineering majors in college and future career opportunities in engineering. Data were collected over a period of two years in six summer camps. Three separate populations of middle and high school students participated in the summer …

Comparative Evaluation Of Investigation Methods For Estimating The Load-Dependent State Of Charge And End Of Discharge Of A Multirotor Uav Battery, Hanna Dibbern, Morten Roßberg, Claudia Werner

Journal of Aviation Technology and Engineering

As the scope of multirotor unmanned aerial vehicle (UAV) applications increases, more attention is being paid to UAV energy requirements, which vary depending on the mission profile. To obtain accurate information about the UAV battery during flight, the idea of a digital twin including a battery state estimation model is promising. For battery state estimation, a Kalman filter combination is the preferred approach in the literature. Comparing different Kalman filters, the unscented Kalman filter has a more accurate estimation for nonlinear systems compared to the extended Kalman filter. In the application of UAV flight with load-dependent flight missions, the comparison …

Stereoscopic-Based Mass Properties Estimation For Warhead Fragments, Alessia Nocerino, Katharine Larsen, Riccardo Bevilacqua, Elisabetta L. Jerome

Student Works

FRAGMENTATION characteristics such as spatial distribution, number of fragments, fragment velocity, and fragment mass can be used to characterize the lethality of a fragmenting weapon or any metal cased explosive [1,2]. However, most warhead tests and evaluations are limited to static arena testing, where fragment characteristics must be collected by hand. Recently, stereoscopic imaging techniques have been added to static arena tests. Using this method, position tracks can be collected for each fragment, and then velocity information can be found. This paper proposes a method to estimate the mass and moment of inertia using data collected by a stereoscopic imaging …

Employment Of Intelligent Predictive Maintenance On Thermal Power Plant Component Parts Taking Condenser Vacuum As A Case Study, Titus Ajewole

Tanzania Journal of Engineering and Technology (TJET)

This work proposes deployment of machine learning in the maintenance of individual constituent parts of steam power plant assemblages. With the condenser vacuum of a steam turbine (in a six-turbine plant assemblage) taken as a case study, information on the past operating parameters of the selected plant component was used to forecast its future working condition. Based on Exponential Gaussian Process of Regression, a model was developed, trained using the diachronic operational data, and employed in determining the future. A quantitative evaluation was employed to provide the distribution of the test values of the data about the lines of regression, …

Computational Modeling Using A Novel Continuum Approach Coupled With Pathway-Informed Neural Networks To Optimize Dynein-Mediated Centrosome Positioning In Polarized Cells, Arkaprovo Ghosal, Padmanabhan Seshaiyar Dr., Adriana Dawes Dr., General Genomics Inc.

Annual Symposium on Biomathematics and Ecology Education and Research

No abstract provided.

Dependence Of The Granulometric Composition Of Chalk During Granulation In A Turbulized Layer, N.A. Annaev, S.Kh. Nurmukhamedov, Zh.V. Sultonov, N.Sh. Khudoiberdieva

Chemical Technology, Control and Management

The article presents the results of an experimental study on chalk granulation in the turbulized layer of a turboblade granulator. The design of the apparatus combines the following sequential processes: grinding, granulating and compacting newly formed granules. In addition, this device has the ability to carry out both rotational and reciprocating motion. It has been established that preliminary grinding of the feedstock increases the efficiency of the granulation process and improves the quality of the finished product. In the experiments, four substances were used to create 2 astringent suspensions and the optimal combination and their ratios were determined. The experiments …

Effect Of Fire Flame On Some Mechanical Properties Of Self-Compacting Concrete, Haider Sadiq M. Ali, Nabeel A-M. Albayati, Basman R. Mohammed, Adil M. Jabbar

Al-Esraa University College Journal for Engineering Sciences

This paper presents an experimental investigation of the effect of fire flame on self-compacting concrete. The experimental program included casting cylinder and prism concrete specimens for compressive strength, modulus of elasticity, modulus of rupture, and concrete density tests. The specimens are exposed to fire flame at 800 ºC approximately for 2 hours or 6 hours. Then the specimens were cooled either in a fast or slow manner. Test results show that the compressive strength was reduced by about (54 - 61)% for fire exposure of 6 hours and by (27 - 37)% for 2 hours of exposure and cooled slowly …

Manual Preparation Of Eyeglasses Based On Corneal Topographical Images For Keratoconus Patients, Bassma Sabah Majeed, Faiz F. Mustafa, Nebras H. Ghaeb

Al-Esraa University College Journal for Engineering Sciences

keratoconus (KCN) is a non-inflammatory, progressive thinning process of the cornea. It is considered one of the advanced biomechanical changes on the corneal surface, and methods of treatment in late cases are special designed contact lenses or surgical intervention. The objective of this paper is to customize the standard eyeglass lens in a way so that it fits with the abnormal shape and changes of the surface of the cornea of a patient suffering from KCN disease.The proposed method here, based on manual scratching of the external surface of the standard eyeglass lens under supervising of an expert optometrist, where …

Age-Friendly Educational Buildings Primary Schools In Kerbala - A Case Study, Anwar Fadhil Hussein, Ibrahim Jawad Kadhim

Al-Esraa University College Journal for Engineering Sciences

The concept of age-friendly societies has gained international attention among researchers, policy makers, and community organizations since the World Health Organization launched the Friendly Communities Project in 2006, to address challenges in some countries, as these challenges affect all aspects of society, and the educational environment represents an important joint of those joints, being the environment that is the most effective and influential in shaping human behavior. The age stage that is most affected and capable of learning and shaping behavior is of importance, which is the childhood stage. Therefore, the research focused on school buildings, as they represent an …

The Role Of Enhancing Interaction With The Natural Environment In Achieving Social Interaction For Children In Orphanage Institutions, Shamael M. W. Al Dabbagh, Zainab Khalid Rashad Al Khafaji

Al-Esraa University College Journal for Engineering Sciences

The child deprived of family care is considered the child most in need of attention and care. When the orphan child enters a new environment for him, it is obvious that he feels alienated, isolated, and loses the sense of interaction and communication with society. The research sees the possibility of mitigating this feeling by enhancing interaction with the natural environment within the internal spaces of the orphanage building and at the neighborhood level. In order to solve the research problem, the research adopted a hypothesis stating that "interaction with the natural environment enhances the achievement of social interaction for …

The Role Of Academic Competitions In Promoting Architectural Education: Tamayouze Excellence Award In Iraqi Architectural Education - Case Study, Nairy Mugardich Krikor, Anwar Subhi Ramadan

Al-Esraa University College Journal for Engineering Sciences

The importance of architectural competitions has emerged in finding the best designs, upgrading and architectural advancement in both practice and thinking. Architectural competitions have become intellectual meetings that contribute to stimulating self-learning and encouraging creativity. They act as an educational tool that leads to competition, giving motivation to the development of skills and learning, in a way that enhances the integration between architectural theory and practical practice for both engineers and architecture students. The research was concerned with studying the effective role of academic competitions in architectural education as one of the ways to improve teaching and learning, and to …

Analysis And Mitigation Of Cyber-Attacks Targeting Infrastructures Operated By Iot Systems, Raja Salih Mohammed Hasan, Nadia Mahmood Ali, Ihsan Jabbar Hasan

Al-Esraa University College Journal for Engineering Sciences

Numerous countries have a high impact on providing the planet with critical infrastructures offering very important services employed in different fields such as water resources management, public services, power grids, telecoms, commercials, and transportation. The increasing solutions in IoT systems made it possible to exploit internet connection services for supporting the critical infrastructures. The latest are being targeted by various types of cyber-attacks due to the advancement in internet services. Therefore, improving the security systems and the ways to detect the threats is highly required. Meanwhile, protecting the critical infrastructures from hostile cyber-attacks is of high significance. This article examines …