Open Access. Powered by Scholars. Published by Universities.®

Chemical Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

Materials Science and Engineering

Institution
Keyword
Publication Year
Publication
Publication Type
File Type

Articles 1981 - 2010 of 2337

Full-Text Articles in Chemical Engineering

Calcined Temperatures Influence On Synthesis And Electrochemistry Charactarization Of Li[Ni0.475Mn0.475Co0.05]O2 For Li-Ion Batteries, Li-Qin Wang, Li-Fang Jiao, Hua-Tang Yuan, Yong-Mei Wang Aug 2006

Calcined Temperatures Influence On Synthesis And Electrochemistry Charactarization Of Li[Ni0.475Mn0.475Co0.05]O2 For Li-Ion Batteries, Li-Qin Wang, Li-Fang Jiao, Hua-Tang Yuan, Yong-Mei Wang

Journal of Electrochemistry

Layered Li[Ni0.475Mn0.475Co0.05]O2 materials have been prepared by a solid-state pyrolysis method.Experiments of XRD,SEM,cyclic voltammetry and charge/discharge cycling were carried out.It can be learned that when calclined at 800 ℃,the sample showed the highest first discharge capacity of 178.8 mAh·g-1 at a current density of 20 mA/g in the voltage range 2.3~4.6 V

Go to article

Investigation On The Resistance To Electrochemical Oxidation Of Carbon Nanotubes With Various Diameters, Yu-Yan Shao, Ge-Ping Yin, Yun-Zhi Gao, Peng-Fei Shi Aug 2006

Investigation On The Resistance To Electrochemical Oxidation Of Carbon Nanotubes With Various Diameters, Yu-Yan Shao, Ge-Ping Yin, Yun-Zhi Gao, Peng-Fei Shi

Journal of Electrochemistry

The resistance to electrochemical oxidation of multi-wall carbon nanotubes(CNT) with various diameters is investigated by applying a fixed potential of 1.2 V(RHE) for 120 h in 0.5 mol L-1 H2SO4.The oxidation current of CNTs decreases with their diameters,but CNTs between 10~20 nm in diameter(D1020) shows the lowest oxidation current.XPS analysis shows that,after oxidation,the increase in surface oxygen for D1020 is the smallest,implying that the oxidation degree for D1020 is the lowest.The conclusion can be reached that CNTs between 10~20 nm in diameter are the most resistant to electrochemical oxidation.The difference in electrochemical stability of CNTs …

Go to article

Studies On Synthesis And Electrochemical Performance Of LiXNi1/3Mn1/3Co1/3O2 As Cathode Material For Lithium Ion Batteries, Xiao-Jian Guo, Jie Li, Yi-Xiao Li, Yong Yang Aug 2006

Studies On Synthesis And Electrochemical Performance Of LiXNi1/3Mn1/3Co1/3O2 As Cathode Material For Lithium Ion Batteries, Xiao-Jian Guo, Jie Li, Yi-Xiao Li, Yong Yang

Journal of Electrochemistry

A series of LiNi1/3Mn1/3Co1/3O2 were synthesized by a combined hydroxides coprecipitation and calcination method.Effects of synthesizing temperature of coprecipitations and the Li∶M ratios on structure and electrochemical performance of the materials were studied.The results showed that materials synthesized with coprecipitation at room temperature(~20 ~(o)C) delivered the best electrochemical performance.Another series of cathode materials LiXNi1/3Mn1/3Co1/3O2 with different Li∶M ratios were synthesized with this method.The results showed that sintering at high temperature could cause loss of LiOH,thus more LiOH should be added.It is demonstrated that Li …

Go to article

Electrochemical Behavior Of Electrolytic Manganese Dioxide In Mgso4 Solution, Dan-Mei Yu, Yu-Jun Si, Chang-Guo Chen, Yu-Ping Liu, Yan Liu Aug 2006

Electrochemical Behavior Of Electrolytic Manganese Dioxide In Mgso4 Solution, Dan-Mei Yu, Yu-Jun Si, Chang-Guo Chen, Yu-Ping Liu, Yan Liu

Journal of Electrochemistry

The rechargeability and crystal structure changing of electrolytic manganese dioxide(EMD) in MgSO4 electrolyte were investigated by cyclic voltammetry,galvanostatic charge/discharge and X-ray diffraction.The results have shown that the EMD has good rechargeability;after several initial cycles,the charge and discharge became stability;after discharge,the γ-MnO2 structure of EMD was changed,the production was reversible and could be recharged to γ-MnO2 structure again which ensured the rechargeability of EMD.

Go to article

Synthesis Of Zinc Polyhedral Microspheres And Applications In Alkaline Zn-Mno2 Battery, Hua Ma, Chun-Sheng Li, Fang-Yi Cheng, Chun-Yuan Zhou, Feng Gao, Jun Chen May 2006

Synthesis Of Zinc Polyhedral Microspheres And Applications In Alkaline Zn-Mno2 Battery, Hua Ma, Chun-Sheng Li, Fang-Yi Cheng, Chun-Yuan Zhou, Feng Gao, Jun Chen

Journal of Electrochemistry

The zinc polyhedral microspheres were synthesized by evaporation of pure zinc powders via a vapor-transport process.The results characterized by XRD and SEM show that the as-synthesized zinc powders are polyhedral microspheres with the diameter of 2~3 μm.The electrochemical investigation showed that the capacity of the as-assembled AA-size primary alkaline Zn-MnO2 battery was increased to 3.14 Ah under the constant discharge current of 100 mA by using the as-deposited microspherical zinc powders as the anode active materials and γ-MnO2 nanowires as the cathode active materials,indicating their potential application in high-energy batteries.

Go to article

High Density Lifepo4/C Synthesized By Controlled Crystallization And Microwave Carbon Thermal Reduction, Chang-Ping Tang, Jie-Rong Ying, Min Lei, Wei Li, Chang-Yin Jiang, Chun-Rong Wan May 2006

High Density Lifepo4/C Synthesized By Controlled Crystallization And Microwave Carbon Thermal Reduction, Chang-Ping Tang, Jie-Rong Ying, Min Lei, Wei Li, Chang-Yin Jiang, Chun-Rong Wan

Journal of Electrochemistry

The spherical FePO4·xH2O was prepared in the solution by controlled crystallization.The precursor FePO4 was obtained in high temperatureceramic approach,then the high density LiFePO4 /C was synthesized by microwave carbon thermal reduction.The structure and morphology of the materials were characterized by means of XRD and SEM techniques,and the electrochemical properties were studies by charge-discharge experiments.

Go to article

Electrochemical Studies On Electrocatalytic Activity Of AuCore PtShell Nanoparticles To Methanol Oxidation, Fang Bao, Jian-Lin Yao, Ren-Ao Gu May 2006

Electrochemical Studies On Electrocatalytic Activity Of AuCore PtShell Nanoparticles To Methanol Oxidation, Fang Bao, Jian-Lin Yao, Ren-Ao Gu

Journal of Electrochemistry

AucorePtshell nanoparticles with different thicknesses were prepared by using chemical reduction method,and characterized by ultraviolet-visible spectroscopy(UV-Vis),transmission electron microscopy(TEM) and cyclic voltammetry(CV).The electrocatalytic activity of AucorePtshell nanoparticles with the mean diameter of 70~80 nm to methanol oxidation was investigated by cyclic voltammetry in the acid solution.The results revealed that the prepared core-shell nanoparticles were covered by Pt shell and exhibited the similar optical property and electrocatalytic activity with the normal Pt surface.Moreover,the electrocatalytic activity increased with the electrochemical sweep in the certain potential range.It might be contributed by the special loose structure of Pt shell …

Go to article

Electrochemical Behavior And Reduction Mechanism Of High Valence Silver Oxide Ag3O4 In Alkaline Solution, Yan Cheng, Ming Yu, Man-Ming Yan, Zhi-Yu Jiang May 2006

Electrochemical Behavior And Reduction Mechanism Of High Valence Silver Oxide Ag3O4 In Alkaline Solution, Yan Cheng, Ming Yu, Man-Ming Yan, Zhi-Yu Jiang

Journal of Electrochemistry

The electrochemical properties of high-valence silver oxide Ag3O4 in alkaline solution were investigated for the first time and the reduction mechanism of Ag3O4 was proposed. It can be recognized that Ag3O4 consists of Ag(Ⅲ) and Ag(Ⅱ)~(*). From the results of voltammetry and XRD experiments it was found that the reduction process of Ag3O4 was more complicated. It could be electrochemically reduced through the series reactions of Ag(Ⅲ) →Ag(Ⅱ) →Ag(Ⅰ) →Ag(O) at low discharge rate or Ag(Ⅲ) →Ag(Ⅰ) →Ag(O) at higher discharge rate.And the Ag(Ⅱ)~(*) could be reduced to …

Go to article

Electrochemical Studies Of Iron-Doped Nickel Oxide Electrode For Oxygen Evolution Reaction, Jin-Zhao Huang, Zheng Xu, Hai-Ling Li, Guo-Hu Kang, Wen-Jing Wang May 2006

Electrochemical Studies Of Iron-Doped Nickel Oxide Electrode For Oxygen Evolution Reaction, Jin-Zhao Huang, Zheng Xu, Hai-Ling Li, Guo-Hu Kang, Wen-Jing Wang

Journal of Electrochemistry

In this paper,the iron-doped nickel oxide thin film as anode catalyst was prepared by RF reactivesputtering method.The oxygen evolution reaction(OER) on the iron-doped nickel oxide was investigated withcyclic voltammetry,liner sweep voltammetry,polarization curves and electrochemical impedance spectroscopy.Results showthat the iron acts as active site in the film which makes the overpotential lower,and changes therate-limiting from primary discharge of OH-ions to the recombination of oxygen atom.With the increasing of ox-ygen content in flu ratio during sputtering,the electrocatalytic activities of the film increase.Iron-doped nickeloxide thin film is promising material as OER electrocatalyst for hydrogen production than the nickel electrode.The oxygen overpotential on the …

Go to article

Desulfovibrio Desulfuricans G20 Tetraheme Cytochrome Structure At 1.5 A˚ And Cytochrome Interaction With Metal Complexes, Mrunalini Pattarkine, J J. Tanner, C A. Bottoms, Y H. Lee, Judy D. Wall May 2006

Desulfovibrio Desulfuricans G20 Tetraheme Cytochrome Structure At 1.5 A˚ And Cytochrome Interaction With Metal Complexes, Mrunalini Pattarkine, J J. Tanner, C A. Bottoms, Y H. Lee, Judy D. Wall

Faculty Works

The structure of the type I tetraheme cytochrome c3 from Desulfovibrio desulfuricans G20 was determined to 1.5 A˚ by X-ray crystallography. In addition to the oxidized form, the structure of the molybdate-bound form of the protein was determined from oxidized crystals soaked in sodium molybdate. Only small structural shifts were obtained with metal binding, consistent with the remarkable structural stability of this protein. In vitro experiments with pure cytochrome showed that molybdate could oxidize the reduced cytochrome, although not as rapidly as U(VI) present as uranyl acetate. Alterations in the overall conformation and thermostability of the metal-oxidized protein were investigated …

Go to article

2nd Annual Undergraduate Research Conference Abstract Book, University Of Missouri--Rolla Apr 2006

2nd Annual Undergraduate Research Conference Abstract Book, University Of Missouri--Rolla

Undergraduate Research Conference at Missouri S&T

No abstract provided.

Go to article

Analysis Of Technical Energy Losses By Using Simulation, Betrianis Betrianis, Randite Herawan Apr 2006

Analysis Of Technical Energy Losses By Using Simulation, Betrianis Betrianis, Randite Herawan

Makara Journal of Technology

Model is a representation of a system. Through model, it can be easier to forecast and control the changing of each element system. Electricity distribution is also a system. Losses are general problem that exist in a distribution network system. But with the right methods, specifically technical energy losses can be reduced in order to increase the efficiency. By making model of the distribution network, the value of technical energy losses in the whole network as well as in every line can be observed. Simulation can also be used to see all losses reduction alternatives. By comparing results from each …

Go to article

Modeling Of Coupled-Tank System Using Fuzzy Takagi-Sugeno Model, Aries Subiantoro Apr 2006

Modeling Of Coupled-Tank System Using Fuzzy Takagi-Sugeno Model, Aries Subiantoro

Makara Journal of Technology

Modeling of Coupled-Tank System Using Fuzzy Takagi-Sugeno Model. This paper describes modeling of coupledtank system based on data measurement using fuzzy Takagi-Sugeno model. The fuzzy clustering method of Gustafson- Kessel algorithm is used to classify input-output data into several clusters based on distance similarity of a member of input-output data from center of cluster. The formed clusters are projected orthonormally into each linguistic variables of premise part to determine membership function of fuzzy Takagi-Sugeno model. By estimating data in each cluster, the consequent parameters of fuzzy Takagi-Sugeno model are calculated using weighted least-squares method. The resulted fuzzy Takagi-Sugeno model is …

Go to article

Design Of Induction Motor Drive Without Velocity Sensor Using Current Vector Controller With Full And Reduced Observer Moving To Dq Axis, Ridwan Gunawan, Feri Yusivar, Wahidin Wahab, Zuhal A. Kadir Apr 2006

Design Of Induction Motor Drive Without Velocity Sensor Using Current Vector Controller With Full And Reduced Observer Moving To Dq Axis, Ridwan Gunawan, Feri Yusivar, Wahidin Wahab, Zuhal A. Kadir

Makara Journal of Technology

Design of Induction Motor Drive Without Velocity Sensor Using Current Vector Controller with Full and Reduced Observer Moving to DQ Axis. The observer is used in estimation velocity sensor usually in α-β axis, therefore this situation will need an extra transformation when we want to add compensator because the flux model is in direct and quadrature-axis dq. Every used the transformation to make possible emerge an error. So in this simulation is used a method to estimate the velocity of induction motor drive with observer that is moved to dq-axis. The model of actual motor used is in alfa-beta axis, …

Go to article

Effect Of Firing Temperature And Holding Time On Characterization Of Al/Sic Metal Matrix Composites Produced By Pressureless Infiltration., Anne Zulfia, Myrna Ariati Apr 2006

Effect Of Firing Temperature And Holding Time On Characterization Of Al/Sic Metal Matrix Composites Produced By Pressureless Infiltration., Anne Zulfia, Myrna Ariati

Makara Journal of Technology

Effect of Firing Temperature and Holding Time on Characterization of Al/SiC Metal Matrix Composites Produced by Pressureless Infiltration. The production of Al-SiC metal matrix composite can be carried out by pressureless metal infiltration processs (PRIMEX). The experiment was conducted using aluminium AC2B ingot as a matrix and 50%Vf SiC powder as a reinforcement which is mixed with 10% Mg powder for wetting agent. The variables of this experiment are holding time and firing temperature to investigate the effect of these conditions on mechanical properties of Al-SiC metal matrix composites. Holding time was conducted for 2,5,8,10,12 hours and firing temperatures was …

Go to article

Development Of Fiber-Optic Humidity Sensor Probe With Gelatin Cladding, Akhiruddin Maddu, Kun Modjahidin, Sar Sardy, Hamdani Zain Apr 2006

Development Of Fiber-Optic Humidity Sensor Probe With Gelatin Cladding, Akhiruddin Maddu, Kun Modjahidin, Sar Sardy, Hamdani Zain

Makara Journal of Technology

Development of Fiber-Optic Humidity Sensor Probe with Gelatin Cladding. Humidity sensor based on optical fiber with gelatin cladding has been developed. In this humidity sensor probe, the origin cladding of optical fiber is replaced by gelatin coating as humidity sensitive cladding. Testing of the optical fiber sensor probe was conducted by measuring of light intensity transmitted on the optical fiber probe for each variation of different humidity treatments. Response of the optical fiber sensor probe measured from 42%RH to 99%RH, the results show an optical transmission curve varied with relative humidity (RH). Optical transmission in the optical fiber probe increase …

Go to article

On The Performance Of Imt-2000 Communication Link Based On Stratospheric Platforms, Iskandar Iskandar, Shigeru Shimamoto Apr 2006

On The Performance Of Imt-2000 Communication Link Based On Stratospheric Platforms, Iskandar Iskandar, Shigeru Shimamoto

Makara Journal of Technology

A new means for providing wireless communication has been currently proposed. It is based on aerial vehicle known as High Altitude Platform or Stratospheric Platforms (SPF). The SPF will be operated at an altitude of 17-22 km above the ground. Therefore, the channel condition may be different compared with those of the conventional terrestrial or satellite wireless channel. In this paper, the channel propagation characteristic of such a system is firstly investigated by means of ray tracing algorithm. We emphasize our investigation in a typical urban environment, in which the mobile users mostly exist. We developed building block model for …

Go to article

Modification Of Bonding Strength Test Of Wc Hvof Thermal Spray Coating On Rocket Nozzle, Bondan T. Sofyan, Haposan J. Pardede, Marizki Stefano, Edi Sofyan Apr 2006

Modification Of Bonding Strength Test Of Wc Hvof Thermal Spray Coating On Rocket Nozzle, Bondan T. Sofyan, Haposan J. Pardede, Marizki Stefano, Edi Sofyan

Makara Journal of Technology

Modification of Bonding Strength Test of WC HVOF Thermal Spray Coating on Rocket Nozzle. One way to reduce structural weight of RX-100 rocket is by modifying the nozzle material and processing. Nozzle is the main target in weight reduction due to the fact that it contributes 30 % to the total weight of the structur. An alternative for this is by substitution of massive graphite, which is currently used as thermal protector in the nozzle, with thin layer of HVOF (High Velocity Oxy-Fuel) thermal spray layer. This paper presents the characterization of nozzle base material as well as the modification …

Go to article

Hybrid Identification System With Arx And Fast Fourier Transform In Application Of A Quarter Of Vehicle Half Active Suspension, Noveri Lysbetti M, Antonius R. Apr 2006

Hybrid Identification System With Arx And Fast Fourier Transform In Application Of A Quarter Of Vehicle Half Active Suspension, Noveri Lysbetti M, Antonius R.

Makara Journal of Technology

Hybrid Identification System with ARX and Fast Fourier Transform in Application of a Quarter of Vehicle Half Active Suspension. In a control system problem, identification system mechanism is a absolute thing, especially in adaptation controlling to disturbance changing. For that case, is needed an identification method which can identify the changing of disturbance in that system. The aim of this research is to give an alternative in system/plant identification which is a combination (hybrid) of ARX and Fast Fourier Transform. So, it is needed an algorithm design for identification process. In this case, the designed algorithm will be implemented in …

Go to article

Co2-Selective Membranes Containing Amino Groups, W.S. Winston Ho Mar 2006

Co2-Selective Membranes Containing Amino Groups, W.S. Winston Ho

Chemical and Materials Engineering Faculty Patents

Novel compositions suitable for fabrication of CO2-selective membranes are disclosed. In one aspect, the present invention is directed to compositions comprising polyimide/polyamine blends and copolymers, and to compositions comprising interfacially polymerized polyamides. In another aspect this invention is directed to novel CO2-selective membranes comprising such polyimide/polyamine blends and copolymers, and to novel CO2-selective membranes comprising interfacially polymerized polyamides. In yet another aspect, the present invention is directed to a novel water-gas-shift (WGS) reactor comprising the novel CO2-selective membranes. Advantageously, the use of the novel CO2-selective membrane allows alteration of the …

Go to article

Graphitized Carbon Foam With Phase Change Material, Angelinda D. Fedden Mar 2006

Graphitized Carbon Foam With Phase Change Material, Angelinda D. Fedden

Theses and Dissertations

This thesis examines the transient heating and cooling responses of graphitized carbon foam infiltrated with phase change material (PCM). The carbon foam provides rapid heat transfer throughout the PCM volume, while the PCM stores the heat for later removal. The foam/PCM system was heated with a copper heating block, and then cooled with a liquid-cooled heat removal block. Infiltrating the foam with PCM significantly increased the length of time before the system reached maximum temperature. The temperature response of the foam/PCM system was consistent over multiple cycles of heating and cooling. A high density foam had a faster heating and …

Go to article

Electrocatalytic Oxidation Of Glucose On Nano Pt/C Electrode, Cui-Lian Chen, Xiao-Lan Wei, Pei Kang Shen Feb 2006

Electrocatalytic Oxidation Of Glucose On Nano Pt/C Electrode, Cui-Lian Chen, Xiao-Lan Wei, Pei Kang Shen

Journal of Electrochemistry

Nano Pt/C electrocatalysts were prepared by intermittent microwave heating method.The electrooxidation of glucose on smooth Pt and～Pt/C electrodes has been studied and compared.The results showed that the electrochemical properties on nano Pt/C were improved due to the reduction of the overpotential and the increase in the kinetic rate.The surface area would be significantly increased when the particle size of the catalyst was reduced to nano-scale,resulting in the increase in the activity.The enhancement in the resistance to poisoning could be explained that the oxygen-containing species are easier to react with poisoning species on nano Pt/C and re-active the electrode.

Go to article

The Effect Of Solution Concentration On Properties Of Ru-Ti-Ir Oxide Anode Coatings, Ke Wang, Yan Han, Jun-Tao Wang, Xiao-Ling Zhang, Yu-Pu Sun Feb 2006

The Effect Of Solution Concentration On Properties Of Ru-Ti-Ir Oxide Anode Coatings, Ke Wang, Yan Han, Jun-Tao Wang, Xiao-Ling Zhang, Yu-Pu Sun

Journal of Electrochemistry

The anode coatings of Ru-Ti-Ir oxide with various solution concentrations were prepared by thermal decomposition.The scanning electron microscope(SEM),energy dispersive X-ray detector(EDX),X-ray diffraction(XRD),accelerated life,polarization curve,cyclic voltammetry and electrochemical impedance.spectroscopy(EIS)tests were carried out.The results showed that there was an obvious effect of solution concentrations on the morphology of the coatings,but little effect on polarization of chlorine evolution.Voltammetric charges and double layer capacitances of anode coatings had a tendency to fall down firstly then increase afterwards as the solution concentration increased.

Go to article

Electrochemical Reduction Behavior Of Benzaldehyde In The Ionic Liquids, Ning Zhao, Wen-Ju Dong, Qi-Zeng Shi Feb 2006

Electrochemical Reduction Behavior Of Benzaldehyde In The Ionic Liquids, Ning Zhao, Wen-Ju Dong, Qi-Zeng Shi

Journal of Electrochemistry

In this paper, the electrochemical reduction of benzaldehyde was investigated in C4MIMBF4, C6MIMBF4  and C8MIMBF4 ionic liquids by cyclic linear sweep voltammetry,cyclic square-wave voltammetry and chronocoulometry.Benzaldehyde exhibits two successive one-electron irreversible reduction(EP1=-1.39 V, EP2=1.69 V) with GC electrode in C4MIMBF4, the voltammetric data for benzaldehyde give diffusion coefficients of 1.5*10-8cm2/s and 1.3*108cm2/s. There is one current peak in C6MIMBF4  and C8MIMBF4 ionic liquids due to their stronger alkalinity …

Go to article

Oxygen Enrichment Effect Of Ceo2 To The Cathode Performance Of Proton Exchange Membrane Fuel Cell, Xiang-Li Hou, Hong-Feng Xu, Jian-Hua Dong, Xin Sun Feb 2006

Oxygen Enrichment Effect Of Ceo2 To The Cathode Performance Of Proton Exchange Membrane Fuel Cell, Xiang-Li Hou, Hong-Feng Xu, Jian-Hua Dong, Xin Sun

Journal of Electrochemistry

CeO2 was added to Pt/C catalyst in the cathode of PEMFC by both sol and impregnation methods.The samples were evaluated by TEM,cyclic voltammogram techniques and proton exchange membrane fuel cell performance test.The addition of CeO2 obviously improved the performance of PEMFC and represented a notable function of oxygen enrichment in the cathode side.But with the addition of CeO2,part of the catalyst surface was covered and led to the performance drop of the PEMFC.The best content of CeO2 is 1% when it is added by impregnation method and 3% when it is added by sol method.

Go to article

Degradation Of Aniline Wastewater By Electro-Heterogeneous Catalysis Reactor, Wei-Li Liu, Ai-Li Zhang, Ji-Ti Zhou, Bao-Jun Jia, Qun-Li Zhu Feb 2006

Degradation Of Aniline Wastewater By Electro-Heterogeneous Catalysis Reactor, Wei-Li Liu, Ai-Li Zhang, Ji-Ti Zhou, Bao-Jun Jia, Qun-Li Zhu

Journal of Electrochemistry

The treatment of aniline wastewater was investigated using novel electro-heterogeneous catalysis reactor.The effects of applied cell voltage,electrolysis lime,pH value and the electrolyte on electrolysis were investigated.The experimental results show that the reactor with a cell voltage of 30 V,an electrolysis time of 1 h,pH value of 7 and a salinity of 800 mg/L can achieve the best removal efficiency on aniline,which is more efficient than the sole electrochemical reactor.

Go to article

Dynamic Sulfur Tolerant Process And System With Inline Acid Gas-Selective Removal For Generating Hydrogen For Fuel Cells, Surjit Randhava, W. S. Winston Ho, Richard L. Kao, Elias H. Camara Jan 2006

Dynamic Sulfur Tolerant Process And System With Inline Acid Gas-Selective Removal For Generating Hydrogen For Fuel Cells, Surjit Randhava, W. S. Winston Ho, Richard L. Kao, Elias H. Camara

Chemical and Materials Engineering Faculty Patents

This invention relates to a sulfur tolerant, dynamic, compact, lightweight fuel process and system that is capable of converting sulfur bearing carbonaceous fuels to hydrogen rich gases suitable for fuel cells or chemical processing applications. The process and system is based on the AHR and WGS reactions, followed by cleanup of byproduct sulfur-containing gases and carbon oxides that would otherwise poison the fuel cell electrocatalyst. Advantageously, this is accomplished via an ASMS and a methanator or an AWMR. The process and system preferably uses a special sulfur tolerant catalysts and hardware designs that enable the conversion in an energy efficient …

Go to article

The Microstructure And Grain Size Of Jet Electroplated Copper Films In Damascene Trench Features, Andrew Tzanavaras, Gregory Young, Stacy H. Gleixner Jan 2006

The Microstructure And Grain Size Of Jet Electroplated Copper Films In Damascene Trench Features, Andrew Tzanavaras, Gregory Young, Stacy H. Gleixner

Faculty Publications

The brightening additive level and dc current density of electroplating baths are two parameters that affect the gap-filling capability and the degree of impurity incorporation in electroplated copper films. Additive incorporation can inhibit grain growth during the room temperature recrystallization process and therefore affect the final grain size. This investigation explores the grain size and microstructure of dc jet-electroplated copper films in 0.35 and 0.50μm Damascene trenches as a function of current density and brightening additive level after first receiving a high-temperature anneal. Unlike a previous study that explored these variables in blanket Cu films [ J. Electrochem. Soc. , …

Go to article

Intracellular Signaling Networks In The Immune Response: Pathways Activated By Interleukin-2 And-4 Receptors And Their Roles In T Cell Proliferation, Kristen K. Comfort Jan 2006

Intracellular Signaling Networks In The Immune Response: Pathways Activated By Interleukin-2 And-4 Receptors And Their Roles In T Cell Proliferation, Kristen K. Comfort

Chemical and Materials Engineering Faculty Publications

Cells sense and respond to chemical and physical stimuli through signal transduction pathways, which mediate cell proliferation, differentiation, migration, and survival. The cytokines interleukin-2 (IL-2) and interleukin-4 (IL-4) are key regulators of the adaptive immune system, particularly influencing the clonal expansion and differentiation of T cells. At least in culture, both synergistic and antagonistic effects of IL-2 and -4 co-stimulation have been reported; the antagonism, when observed, is thought to arise from the utilization of a common subunit shared by IL-2 and IL-4 receptors. We have sought to characterize IL-2 and IL-4 signaling at the level of intracellular pathways activated …

Go to article

Combinatorial Study Of Ni-Ti-Pt Ternary Metal Gate Electrodes On Hfo2 For The Advanced Gate Stack, K.-S. Chang, M. L. Green, J. Suehle, E. M. Vogel, H. Xiong, Jason R. Hattrick-Simpers, I. Takeuchi, O. Famodu, K. Ohmori, P. Ahmet, T. Chikyow, P. Majhi, B.-H. Lee, M. Gardner Jan 2006

Combinatorial Study Of Ni-Ti-Pt Ternary Metal Gate Electrodes On Hfo2 For The Advanced Gate Stack, K.-S. Chang, M. L. Green, J. Suehle, E. M. Vogel, H. Xiong, Jason R. Hattrick-Simpers, I. Takeuchi, O. Famodu, K. Ohmori, P. Ahmet, T. Chikyow, P. Majhi, B.-H. Lee, M. Gardner

Faculty Publications

The authors have fabricated combinatorial Ni–Ti–Pt ternary metal gate thin film libraries on HfO2 using magnetron co-sputtering to investigate flatband voltage shift (ΔVfb) , work function (Φm) , and leakage current density (JL) variations. A more negative ΔVfb is observed close to the Ti-rich corner than at the Ni- and Pt-rich corners, implying smaller Φm near the Ti-rich corners and higher Φm near the Ni- and Pt-rich corners. In addition, measured JL values can be explained consistently with the observed Φm variations. Combinatorial methodologies prove to be useful …

Go to article

First Prev Next Last