Chemical Engineering Commons^™

Influence Of O-Phenylenediamine On The Catalysis At Hrp Enzyme Electrode In 1,4-Dioxane, Hong Chen, Hui-Huang Wu

Journal of Electrochemistry

Horseradish peroxidase (HRP) was immobilized by crosslinkage on the glassycarbon electrode to prepare the enzyme electrode, where the reduction of H₂O₂ was studied in 1,4-dioxane media. It was shown that HRP electrode can catalyze the reduction of H₂O₂ without anymedintor, however, as an activator, o-phenylenediamine can promote the bio-catalysis. In thepresence of the activator, the parallel reactions occurred on the enzyme electrode. The workingcondition of the HRP electrode was investigated as the sensors for H₂O₂ and o-phenylenediamine, also the influence of water content in organic phase was discussed on the performance …

Studies On The Structure Of Licoo2 Synthesized With Tartaric Acid And The Behaviorof Its Rechargeable Lithium Battery, Fuping Zhang

Journal of Electrochemistry

The structure of LiCoO₂ synthesized with tartaric acid and the behavior of itsrechargeable Lithium battery have been studied by XRD, XPS, CV, CT. It has been shown that LiCoO₂ has a space group R3m with hexagonal parameters a=0.2810 nm, c=1.4088 nm. Low-spin state Co³⁺ configuration in LiCoO₂ has been suggested. Also, Li₂O, was identified onits surface. Furthermore, the capacity and the middle working voltage of its Lithium battery are about 120 mA·h·g^-1 and 3.8 V, respectively. The EMF of the cell changes with the Lithium composition of itscathode following E=4.318-0.450 X^2/3 in …

The Oxidation Of Hydrogen Absotbing Alloys And Its Inhibition, Suqin Wang, Baojia Xia, Geping Yin, Pengfei Shi

Journal of Electrochemistry

This paper introduces the method to judge: 1)the possibility of oxidation of themetal hydride electrode in an anode process by cyclic voltammetric curves, 2)the oxidation pattern ofmetal hydride electrode in oxygen atmosphere in various charged states, and 3)the inhibition ofoxidation of hydrogen absorbing alloys by certain surface treatment.

An Indirect Electrochemical Oxidation Of Toluene──Anodic Oxidation Of Mn(Ⅱ) On The Lead Electrode, Zhonghua Wang, Qingmin Hua, Guacai Chen, Zhongquan Wang, Yunan Qiu, Xingguo Yan

Journal of Electrochemistry

The electrochemical oxidation of Mn(Ⅱ) to Mn(Ⅱ) in concentrated H₂SO₄ (2 ~ 8 mol⋅L^-1) at lead electrode has been studied. It is found that the electrode surface is oxidized to PbO₂ in a direct electrochemical reaction, then PbO₂ formed reacts with Mn(Ⅱ) in a chemical reaction. Some effects involves current density, concentration of H₂SO₄, temperature and conversionwere evaluated. The rule of electrogenerated Mn(Ⅲ) in flow electrolysis cell were determined at several conditions. The current efficiency at greater than 90% is obtained in general.

Photoelectrochemical And Spectroelectrochemical Studies Oniron Oxide Ultrafine Particles, Maizhi Yang, Yongjun Ji, Wen Zhang, Shengmin Cai, Xiaojiang Lu, Zhongqun Tian, Jin Luo

Journal of Electrochemistry

In this paper, Raman spectra, photocurrent and the UV-VIS reflectance aremeasured for studying the α-Fe₂O₃ ultrafine particles adsorbed on Pt electrode. The blue shifts of Raman peaks demonstrate the size quantization effect for the particles of 50 nm in diameter ascompared with the bulk material. With the changing of the potential, the photocurrent decrcases as the UV-VIS reflectance increases, and vice-versa. Therefore, the potential not only affects the hargetransfer direcdtion in the interface of electrode/redox couple, but also influences the light absortion onthe surface of particles. According to the results of photoelectrochemistry, we suggest that the cathodic …

Horseradish Peroxidase/Poly-O-Phen Ylenediamine Mem Brane Electrode: Preparation And Properties, Dong Wei, Huihuang Wu

Journal of Electrochemistry

A horseradish peroxidase (HRP)/poly-o-phenylenediamine (PPD) membrane electrode was prepared by electropolymerization of o-phenylenediamine on glassy carbon in pH 7.0 phosphate buffer, the process of the enzyme immobilization was studied. The enzyme electrode obtained exhibits the activity to catalyze the electroreduction of hydrogen peroxide in the absence of any electron transfer mediator. The red uction reaction occurs in the potential range of PPD redoxprocess, it was believed that the polymer participates in electron transfer of the enzyme. The enzyme reaction kinetics at rotating HRP/PPD electrode was analysed, and the factors influencing kinetic parameters were discussed.

The Electrochemical Reduction Of 2-Ethylanthraquinone (2eaq), Yaobin Zhu

Journal of Electrochemistry

The process of electrochemical reduction of 2EAQ in DMSO is studied using CVand ESR methods in this work, Pt, Pd and some implanted materials are used as electrodes. The quasi-rever-sible property of two electron transfer steps and their following homogeneous chemical reactions are illustrated. The mechanism of the electrochemical red uction of 2EAQ and the kinetic parameters of the related steps are obtained. Having measured the influence of water content in the system, the effect of the proton donor is discussed. After comparising the experimental results with each other these experiments gives us the idea that the replacement of metal …

The Reduction Of Oxygen To Hydrogen Peroxide At The Poly(O-Phenylenediamine)-Filmed Electrode, Zhaoe Lu, Tiangeng Zhong, Guanyong Zhang

Journal of Electrochemistry

The poly(o-phenylenediamine) (PPD) filmed graphite electrode was formed by electro-polymerization of o-phenylenediamine in acidified (pH=1) 0.2 mol·L^-1 Na₂SO₄ solution using the cyclic voltammetric methed. The catalytic effect of the electrcareduction of oxygen in acid olution was demonstrated by the voltammogram of the electrode in the oxygen saturated acid solutionof Na₂SO₄. The current efficiency of the reduction of oxygen to hydrogen peroxide was determined by the electrolysis in a divided cell under the condition of constant current. The various effectsinfluencing the accmulation of H₂O₂ in the catholyte were discussed.

Studies On Coordination Behavior Of Dimethyl Sulfoxide In Complex Of Rare Earth With Cryptand, Shichang Liu, Tianpei Zhu

Journal of Electrochemistry

Electrochemical reduction reaction in the course of the titration of Eu(2.2.2) and Eu(2.2) using strong bonding solvent, DMSO, in C₂H₄Cl₂ has been investigated by cyclic voltammetry. The greater the concentration of strong bonding solvent, the more negative the half-wave potentials for the reduction reaction are. The coordination number of Eu(2.2.2) and Eu(2.2) which are 2 and 3 respectively, with DMSO can be calculated, according to the relations between half-wave potentials and the variety of concentration of DMSO.

A Photoelectrochemical Investigation Of Zirconium Oxide Film, Maizhi Yang, Ping Wei, Di Quarto F., Piazza S., Sunseri C.

Journal of Electrochemistry

A photoelectrochemical investigation has been carried out on zirconium initialoxide film and its oxide film grownanodically at constant rate up to different thickness. Both anodicand cathedic photocurrents on the photocurrent spectrum depended on the potential, but had littlerelation with the forming anedic films or measuring solutions. Photocurrent spectrum and photocurrenttransients suggested that the oxide films on zirconium were duplex layers structure. The internal layerwas ZrO₂ and the external layer ZrO₂·(H₂O)_n. The photocurrent included photogenerated carrier ininternal and external oxide films, as well as internal photoinjection process for electrons from thesubstrate metal into the …

Synthesis Of LiXCoo2 And Its Behaviour In Rechargeable Lithium Battery, Mingfeng Guo, Ruimin Yang, Zebo Zhang, Jincao Ye

Journal of Electrochemistry

The Variations of crystal lattice parameters of Li_xCoO₂ during charge anddischarge have been st ud ied by XRD and AAR spectroscopy. It was found that the Li_xCoO₂ crystalvolume expanded during charge and contracted during discharge. The crystal lattice structure was broken because of the formation of Co₃O₄ when deeply charge.The variation of lattice parameter C₀ value in cycling process was similar to that in charge process.The variation of 006 peak was the mostsensitive in every case. In case of preheating for 20 hours at 700℃ before operating high temperature, the …

Electroreduction Of The Nittobenzene On Titanium Electrode Implanted With Palladium, Zhongda Wu, Xianjun Zhu, Hongsen Wang

Journal of Electrochemistry

The titanium substrates were bombarded with 1×10¹⁷～5×10¹⁷ ions·cm^-2 ofpalladium at the room temperature. The surface composition of implanted electrode and concentration-depth profiles of various elements were measured by AES. The electrored uction processes ofnitrobenzene (NB) in 0.1 mol/L NaOH solution at Pd/Ti electrodes have been investigated by cyclicvoltaivimetry. The results show that the palladium implanted titanium electrodes exhibit a high catalyticactivity in the electroreduction of NB. The NB radical anion, which is the product of one-electronelectroreduction of NB, was detected by ESR in-situ in conjunction with electrochemical methods. Aniline was also detected as a product of …

Electroreduction Of Holmium Ion On Iron Electrde In Molten Cholorides, Qiqin Yang, Guankun Liu, Yuzhi Su

Journal of Electrochemistry

The cyclic voltammetry, open circuit potential-time curve after poteritiostatic electrolysis, current-time curve at potential step, X-ray diffraction and electron probe microanalysiswere used to investigate the electrode process of Ho(Ⅲ) reduced on iron electrode in molten chloridesand the phases of surface alloy layer. The Ho-Fe alloys are formed at first, and then the metallic holmium is deposited when Ho(Ⅲ) is reduced on iron electrode. The charge transfer is reversible. The free energies of formation for the four inter metallic compounds of Ho-Fe system, the diffusion coefficients and diffusion activation energy of Ho in alloyed cathode are determined.

The Study Of The Growth Processes Of The Oxides On Lead Electrodes In Sulfuric Acid Solution, Hesheng Zhai, Xuguang Chen, Jinkua You, Yong Yang, Zugeng Lin

Journal of Electrochemistry

The growth processes of PbO and PbO₂ on lead electrodes have been investigatedby using in-situ methods that are combined with temporary AC resistance measurment technique and in-situ laser scanning photoelectrochemical microscopy. It is found that a linear relationship existsbetween the electrode resistance(R) and^1/2 after the electrode is oxidized at +0.6 V(vs.Hg/H₂SO₄/35% H₂SO₄) for more than 5 min. This result suggests that the growth of PbO is well distributed during the early stage of oxidation. The study by using laser scanning photoelectrochemical microscopy has further proved this point. The results also …

Electrocatalytic Oxidation Of Formaidehyde And Formic Acid On A Pt/SbAd Electrode, Hong Li, Lincai Jiang, Xiong Jiang

Journal of Electrochemistry

The electrocatalytic activity for the oxidation of formaldehyde and formic acid ona Sb-modified platinum (Pt/Sb_ad) was investigated. Results showed that the Pt/Sb_ad electrode was electrocatalytically more active than a Pt electrode in the anodic oxidation of formaldehyde and formicacid. In the case of formaldehyde, an oxidation peak appeared at a potential of ca. 0.7V. During the oxidation of formic acid, a 4-fold increase in the 1st peak current was observed. The Sb-modified platinum electrode was found to be most electrocatalytically active at a coverage of 0.75±0.05. The electrocatalytic activity of the Pt/Sb_ad electrode can be best …

Thermal Characterization Of Carbon Monoxide Oxidation Catalysts Using Thermogravimetric Analysts And Differential Scanning Calorimetry, Rene A. Bartgis

Chemistry & Biochemistry Theses & Dissertations

Catalysts composed of platinum and/or palladium on tin (IV) oxide supports, with and without silica gel, as well as catalysts composed of gold on manganese oxide, have been developed for the recombination of carbon monoxide and oxygen to form carbon dioxide for use in carbon dioxide lasers. A thermogravimetric method and a differential scanning calorimetric method have been developed for the thermal characterization of these catalysts. The mass loss data and the enthalpy changes determined as the catalysts lost water were then related to existing activity data for these catalysts. No relationship was found between the thermal data and the …

Reactivities Of Some Aromatic Compounds At Supercritical Water Conditions, Chun-Cheng Tsao

Masters Theses

The goals of this study are the removal of nitrogen from the extraction products of coal by Supercritical Water and the development of an understanding of the reactions leading to this removal. Six model compounds with structures similar to the intermediates of the coal liquefaction processes were studied. Benzylamine generated toluene through hydrogen abstraction after the C-N bond rupture. To a lesser extent, the oxidation of the benzylic carbon took place leading to benzene formation. Both reaction pathways occurred with equal probability for benzylidenebenzylamine, producing comparable yields of benzene and toluene. Benzaldehyde generated benzene through the oxidation/decarboxylation sequence. Benzyl alcohol …

Model Calculational Approach To The Conformation Of Adsorbed Polypeptide Fragments, Timothy J. Mckeon

Opportunities for Undergraduate Research Experience Program (OURE)

The focus of the paper is to examine possible conformational changes of peptides when placed in the presence of a poly-synthetic material. A major concern in the pharmaceutical industry is the loss of potency of polypeptide drug products during processing, packaging and storage. An example of this is polymer syringes being used in place of glass ones. The effect is that some protien-derived products experience structural changes due to contact with the polymer. This is otherwise known as surface denaturation. In order to understand the energetics of interfacial polypeptide systems, a calculational approach was used via the program Alchemy. The …

The Use Of Thermal Analysis In The Identification And Characterization Of Fibers Of Forensic Interest, Ronald J. Coffey

All-Inclusive List of Electronic Theses and Dissertations

This study investigates the use of thermal analysis for the identification and characterization of fibers for forensic purposes. Fibers such as polyesters, polyacrylics, polypropylenes and nylon were investigated by Differential Thermal Analysis (D.T.A.) and Thermogravimetric Analysis (T.G.A.) to see if their resulting thermograms were characteristic of each fiber. Also, infrared analysis was performed on each fiber. In addition, such factors as heating rate and sample size along with fiber blends were studied as to their effect on thermograms. As a result of this study several important conclusions may be drawn. Although it was found that for the most part D.T.A. …

Plasma Polymerization Of Tetrafluoroethylene. Iii. Capacitive Audio Frequency (10 Khz) And Ac Discharge, N. (Nicholas) C. Morosoff, H. Yasuda, E. S. Brandt, C. N. Reilley

Chemical and Biochemical Engineering Faculty Research & Creative Works

The plasma polymerization of tetrafluoroethylene (TFE) is studied in a capacitively coupled system with internal electrodes using a 10 kHz (af) and a 60 Hz (ac) source. The emphasis is on identifying conditions that are compatible with continuous coating of plasma polymer on a substrate moving through the center of the interelectrode gap. Operation at a pressure below 100 mTorr is most favorable for deposition of a substantial portion of the plasma polymer on this substrate. Plasma polymer deposited in this way is characterized by ESCA and by deposition rate data and compared to that deposited using rf power in …

Plasma Polymerization Of Tetrafluoroethylene. Ii. Capacitive Radio Frequency Discharge, N. (Nicholas) C. Morosoff, H. Yasuda, E. S. Brandt, C. N. Reilley

Chemical and Biochemical Engineering Faculty Research & Creative Works

The plasma polymerization of tetrafluoroethylene (TFE) is studied in a capacitively coupled system with internal electrodes using radio frequency (13.56 MHz) power. The emphasis is on identifying conditions that are compatible with continuous coating of plasma polymer on a substrate moving through the center of the interelectrode gap. At high pressure (500 mTorr), deposition of plasma polymer is primarily on the electrodes rather than on a substrate placed midway between electrodes. Glow is observed in only part of the interelectrode gap at low powers and fills the gap only at high power levels. The use of a magnetic field effects …

Plasma Polymerization Of Tetrafluoroethylene. I. Inductive Radio Frequency Discharge, H. Yasuda, N. Morosoff, E. S. Brandt, C. N. Reilley

Chemistry Faculty Research & Creative Works

The plasma polymerization of tetrafluoroethylene in an inductively coupled radio frequency glow discharge, using a flow system, was studied. A simple long tube reactor, with the coupling coil placed at the middle of the tube and gas entrance and exit at the respective ends, was used. Deposition rates and the chemical nature of the polymer (as revealed by ESCA spectra and surface energy studies) are obtained as a function of location in the reactor tube with respect to the coupling coil and of applied energy per unit mass of tetrafluoroethylene (W/FM). It was found that a fluorine poor polymer, containing …

4th Annual Umr-Dnr Conference On Energy -- Entire Proceedings, University Of Missouri--Rolla

UMR-MEC Conference on Energy / UMR-DNR Conference on Energy

No abstract provided.

A Systems Study Of Oil Pollution Abatement And Control For Portland Inner And Outer Harbor, Casco Bay, Maine, Arthur D. Little, Inc.

Maine Collection

A Systems Study of Oil Pollution Abatement and Control for Portland Inner and Outer Harbor, Casco Bay, Maine

to State of Maine, Department of Environmental Protection, State House Augusta, Maine 04330

Appropriation Number 4320-4001

by Arthur D. Little, Incorporated, 20 Acorn Park, Cambridge, Massachusetts 02140 (March 15, 1976).

Contents: Executive Summary / 1. Introduction / 2. Identification of Vulnerable Resources / 3. Potential Oil Spill Locations / 4. Oil Spill Movement / 5. Containment and Disposal Systems / 6. Oil Monitoring Systems / 7. Marine Navigation In Portland Inner and Outer Harbors / Appendices

The Synthesis Of New Maleimide Addition Polymer Precursors, Richard B. Brown

Chemistry & Biochemistry Theses & Dissertations

1H-2,3-dimethylpyrrolo(1,2-a) benzimidazol-l-one (27) and 1H,9H- 2,3,7,8-tetramethyl-bispyrrolo(1,2-a:6,7-a')benzodiimidazo1-1,9-dione (32) have been synthesized from dimethylmaleic anhydride and o-phenylenediamine and 1,2,4,5-tetraaminobenzene, respectively. The presence of reactive olefinic double bonds in the synthesized compounds was of interest as a site for possible addition polymerization.

The synthetic route involved, in both cases, a simple nucleophilic substitution reaction between the diamine(or tetraamine) and the anhydride to form an intermediate amide-acid-amine which rapidly cyclized to the imide amine. The final ring closure required more rigorous conditions and occurred at melt reaction temperatures.

Process Control Of Activated Sludge Treatment, Phase Ii, Richard I. Kermode, Robert W. J. Brett, Joseph D. Pault Jr.

KWRRI Research Reports

Material balances on substrate and microorganisms were derived in conjunction with various mixing configurations thought to accurately describe the activated sludge process. These models include the completely mixed with bypass, plug flow, and plug flow with bypass. Two sets of kinetic mechanisms for substrate utilization and bacterial growth were employed.

A feed forward controller was designed from linear approximations of the material balances derived in the completely mixed with bypass mixing model. Utilizing frequency response methods, the controller was found essentially identical to a completely mixed modeled controller developed in a prior investigation.

Through computer simulation the controller's effectiveness was …

The U. S. Wind Power Program, Joseph M. Savino

UMR-MEC Conference on Energy / UMR-DNR Conference on Energy

Today I would like to talk about wind energy in, basically, two parts. I would like to bring to your attention some of the developments that have occurred in the 20th century. Many of us who have gone through school in the last 25-30 years don't recall anywhere in our engineering education much information dealing with wind energy, and that may come as a surprise to you as it did to me, to learn how much has actually been done in the 20th century to develop large scale wind-driven machines. After I get through with that introduction I would like …

Alternate Energy Removal Modes For Nuclear Power Reactors, Robert L. Carter

UMR-MEC Conference on Energy / UMR-DNR Conference on Energy

Attention is focussed upon the unique qualities of high energy fission particles, and upon the fundamental limits to the direct removal of their kinetic energy by electrostatic means and by cyclotron resonance deceleration. Efficiencies of secondary and tertiary product ionization and excitation produced by fission particles are examined. The potential for delivery of power through various non-thermal modes is discussed, and the significant unknowns relating thereto are identified.

Prospects For Nuclear Fusion Power, William C. Gough

UMR-MEC Conference on Energy / UMR-DNR Conference on Energy

The prospects for fusion power are discussed including the need for fusion, its environmental advantages, and the research results that form the basis for present confidence that the program will succeed. The steps remaining before commercial fusion power will be available are outlined. Exploratory ideas for second generation fusion electric power plants, and non electrical applications of fusion technology and reactors are briefly covered.

The Energy Problem -- Crude Oil, J. A. Marshall

UMR-MEC Conference on Energy / UMR-DNR Conference on Energy

This paper discusses the national energy problem as it affects the demand for and availability of crude oil. Forecasts of energy demands to 1990 have been made based on population trends and changing life styles in the USA. Projections of energy supplies show a rapidly increasing gap between supply of crude oil and demand for crude oil from the early 1970's through 1990. The need for imported crude oil to supply the forecast deficit is discussed. The political and economic implications of these imports are also discussed. The need for refineries, port facilities, tankers, and pipelines are presented. Finally, recommendations …