Open Access. Powered by Scholars. Published by Universities.®

Chemical Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

Catalysis and Reaction Engineering

Institution
Keyword
Publication Year
Publication
Publication Type
File Type

Articles 61 - 90 of 1355

Full-Text Articles in Chemical Engineering

Upcycling Waste To Wealth: Cuo-Sio₂/Reduced Graphene Nanocomposite From Pomegranate Peels For One-Pot Low-Temperature Conversion Of Waste Oils Into Valuable Fatty Acid Monomers, Attia Attia, Shahenda Mahran Dr., Maria Centeno Prof., Basudeb Saha Aug 2025

Upcycling Waste To Wealth: Cuo-Sio₂/Reduced Graphene Nanocomposite From Pomegranate Peels For One-Pot Low-Temperature Conversion Of Waste Oils Into Valuable Fatty Acid Monomers, Attia Attia, Shahenda Mahran Dr., Maria Centeno Prof., Basudeb Saha

Petroleum Engineering and Gas

and hence reduce the price of the fatty acid monomers. This study reports for the first time a novel, environmentally benign, highly active copper oxide-silica oxide/reduced graphene oxide (CuO-SiO2/RGO), heterogeneous nano-catalyst derived from waste pomegranate peels, for the one-pot, low-temperature synthesis of fatty acid monomers from high-acid-value waste vegetable oil (WVO). The synthesised nano-catalyst was extensively characterised using XRD, FT-IR, TEM, SEM, EDX and TGA-DTA. Further, it was utilised to synthesise fatty acidrich oleic phenoxypropyl acrylate (OPA) monomer from high acid value WVO via a single-step reaction.

Go to article

Boosted Electrochemical Oxidation Of Methanol At Feox/Pd/Au Ternary Nanocatalyst, Ghada El-Nowihy Aug 2025

Boosted Electrochemical Oxidation Of Methanol At Feox/Pd/Au Ternary Nanocatalyst, Ghada El-Nowihy

Chemical Engineering

In this paper, a highly effective catalyst for methanol electrochemical oxidation (MEO) was developed by the sequential deposition of spherical gold nanoparticles (nano-Au) on a glassy carbon (GC) rod’s surface followed by palladium nanoparticles (nano-Pd), then, iron oxide nanoparticles (nano-FeOx) to form FeOx/Pd/Au/GC catalyst. The sequence of catalyst’s layers proved crucial in optimizing its performance towards MEO. Notably, FeOx/Pd/Au/GC electrode produced a remarkable enhancements in the catalytic activity (by 7 times) and stability (approximately 16 fold) when compared to those produced at Pd/GC rod. Additionally, the onset potential for MEO was significantly reduced by approximately 40 mV. Through material and …

Go to article

Cultivation Of Botryococcus Braunii For The Production Of Hydrocarbons Suitable For Fuel Use, Bryan C. Carroll Aug 2025

Cultivation Of Botryococcus Braunii For The Production Of Hydrocarbons Suitable For Fuel Use, Bryan C. Carroll

All Theses

Energy security, rural poverty, and climate change are pressing issues of our time. Biofuels provide a solution to these issues, with a focus on sustainable aviation fuel, SAF, due to compatibility with aircraft infrastructure and energy density. This research aims to review and produce knowledge about a specific microalga, Botryococcus braunii, for its potential for SAF. First a literature review on the process was conducted followed by an experimental study on the impact of aqueous media and inorganic carbon its growth and hydrocarbon content. The literature review found the process consists of cultivation followed by lipid extraction or hydrothermal …

Go to article

Numerical Simulation Of The Pitting Corrosion Behavior Of Stainless Steel Bellows Influenced By Varying Liquid Film Thicknesses, Lu-Jun Ren, Guo-Min Li, Zhen-Xiao Zhu, Hai-Yan Xiong, Bing Li Jul 2025

Numerical Simulation Of The Pitting Corrosion Behavior Of Stainless Steel Bellows Influenced By Varying Liquid Film Thicknesses, Lu-Jun Ren, Guo-Min Li, Zhen-Xiao Zhu, Hai-Yan Xiong, Bing Li

Journal of Electrochemistry

To advance the understanding of the corrosion behavior of stainless steel bellows in marine atmospheric environments and enhance the precision of service life predictions, this study employs finite element simulations to investigate the pitting corrosion rates and pit morphologies of bellows peaks and troughs under varying electrolyte film thicknesses. The model incorporates localized electrochemical reactions, oxygen concentration, and homogeneous solution reactions. For improved computational accuracy, the fitted polarization curve data were directly applied as nonlinear boundary conditions on the electrode surface via interpolation functions. Simulation results reveal that the peak regions exhibit faster corrosion rates than the trough regions. With …

Go to article

Regulating The Amount Of Graphene Oxide For Enhanced Capacitive Energy Storage Of Mof Derived Materials, Yong-Ji Qin, Jing-Quan Yang, Hao Wang, Mei-Ling Lian, Pei-Pei Jia, Jun Luo, Xi-Jun Liu, Jun-Feng Liu Jul 2025

Regulating The Amount Of Graphene Oxide For Enhanced Capacitive Energy Storage Of Mof Derived Materials, Yong-Ji Qin, Jing-Quan Yang, Hao Wang, Mei-Ling Lian, Pei-Pei Jia, Jun Luo, Xi-Jun Liu, Jun-Feng Liu

Journal of Electrochemistry

In pursuit of more efficient and stable electrochemical energy storage materials, composite materials consisting of metal oxides and graphene oxide have garnered significant attention due to their unique structures and exceptional properties. Graphene oxide (GO), a two-dimensional material with an extremely high specific surface area and excellent conductivity, offers new possibilities for enhancing the electrochemical performance of metal oxides. In this work, we synthesized metal- organic framework (MOF) and GO composites by regulating the amount of GO, and successfully prepared composites of metal oxides supported by nitrogen-doped carbon frameworks and GO through a simple one-step calcination process. Based on the …

Go to article

Ionic Liquid Enhanced Proton Transfer For Neutral Oxygen Evolution Reaction, Ming-Xing Chen, Nian Liu, Zi-He Dua, Jing Qi, Rui Cao Jul 2025

Ionic Liquid Enhanced Proton Transfer For Neutral Oxygen Evolution Reaction, Ming-Xing Chen, Nian Liu, Zi-He Dua, Jing Qi, Rui Cao

Journal of Electrochemistry

The development of highly active catalyst in pH-neutral media for oxygen evolution reaction (OER) is critical in the field of renewable energy storage and conversion. Nevertheless, the slow kinetics of proton-coupled electron transfer (PCET) hinders the overall OER efficiency. Herein, we report an ionic liquid (IL) modified CoSn(OH)6 nanocubes (denoted as CoSn(OH)6-IL), which could be prepared through a facile strategy. The modified IL would not change the structural characteristics of CoSn(OH)6, but could effectively regulate the local proton activity near the active sites. The CoSn(OH)6-IL exhibited higher intrinsic OER performances than the pristine …

Go to article

Anion Exchange Membrane Transport And Accelerated Testing Methods For Co2 Electrolyzers With Cu-Based Electrocatalyst, John C. Hendershot Jul 2025

Anion Exchange Membrane Transport And Accelerated Testing Methods For Co2 Electrolyzers With Cu-Based Electrocatalyst, John C. Hendershot

LSU Doctoral Dissertations

Electrocatalytic carbon dioxide (CO2) reduction to C2+ products holds promise for low carbon intensity fuels, chemicals, and food; however, durability challenges, particularly bicarbonate (HCO3-)and carbonate (CO32-) salt precipitation, hinder their commercialization. This report considers water (H2O) and ion transport properties of conventional anion exchange membranes (AEMs) in zero-gap membrane electrode assembly (MEA) configurations using Cu electrocatalysts. Transport characterization includes H2O diffusion, permeability, potassium (K+) diffusion, and transference numbers using three commercial AEMs, including piperidinium-based (Versogen), quaternary ammonium-based (Fumasep), and imidazolium-based (Dioxide Materials) membranes. Accelerated lifetime …

Go to article

Low Temperature Methane Coupling With Co And Co2, A K M Kazi F.M. Aurnob Jul 2025

Low Temperature Methane Coupling With Co And Co2, A K M Kazi F.M. Aurnob

LSU Doctoral Dissertations

Methane is the smallest hydrocarbon and the most abundant component in natural gas. Despite its availability, its chemical utilization has remained limited due to the challenges associated with direct methane activation and conversion. Most of the methane oxidation and oxidative carbonylation reactions in literature have been carried out at high-pressure using batch reactors or at ambient pressure using flow reactors. While batch reactors have been shown to have higher product yields, they are limited in their capability to provide real-time kinetic insights and comprehensive mechanistic understanding of the reactions involved due to the long residence time. This limits rationalization of …

Go to article

Pd-Based Hydrogen Separation Membranes Synthesized Via A Liquid-Phase Route, Chase W. Thompson Jul 2025

Pd-Based Hydrogen Separation Membranes Synthesized Via A Liquid-Phase Route, Chase W. Thompson

Chemical and Biological Engineering ETDs

Palladium (Pd) membranes have gained significant attention for their ability to selectively separate hydrogen, a critical process for clean energy applications such as fuel cells and hydrogen storage. However, challenges such as grain growth, sintering, hydrogen embrittlement, and film uniformity limit their scalability and long-term stability. This thesis focuses on the controlled synthesis, deposition, and stability of Pd nanoparticles to optimize membrane performance for hydrogen separation. This work investigates solution-phase synthesis of Pd nanoparticles, focusing on temperature, precursor concentration, and solvent composition as key variables influencing particle growth and dispersion. Pd membranes were fabricated using nanoparticle deposition onto porous supports, …

Go to article

Anion Exchange Membrane Durability For Electrochemical Co2 Reduction In Membrane Electrode Assembly Cells, Soundarzo Tasnim Jul 2025

Anion Exchange Membrane Durability For Electrochemical Co2 Reduction In Membrane Electrode Assembly Cells, Soundarzo Tasnim

LSU Master's Theses

The electrochemical reduction of CO₂ using membrane electrode assembly (MEA) cells has emerged as a promising approach for carbon capture and conversion into valuable products. This study investigates the degradation mechanisms of anion exchange membranes (AEMs) in CO₂ reduction applications, focusing on Sustainion X37-50, PiperION, and FAA-3-50. The research analyzes the impact of chemical and mechanical degradation on membrane performance, highlighting key stability challenges in long-term operation. Fourier transform infrared spectroscopy (FTIR) and electrochemical impedance spectroscopy (EIS) were employed to monitor functional group stability and ionic conductivity loss over extended operation. The results indicate that hydroxide-induced degradation leads to nucleophilic …

Go to article

Experimentally Driven Numerical Model Of Carbon/Polyaniline-Based Glucose Monitoring Sensors: An Evaluation Using A New Figure Of Merit, Ziad Khalifa, Kyrillos Selim, Amira Ali, Sameh Abdellatif Jul 2025

Experimentally Driven Numerical Model Of Carbon/Polyaniline-Based Glucose Monitoring Sensors: An Evaluation Using A New Figure Of Merit, Ziad Khalifa, Kyrillos Selim, Amira Ali, Sameh Abdellatif

Chemical Engineering

This study presents an experimentally driven numerical model for evaluating carbon/polyaniline (PANI)- based glucose monitoring sensors (GMSs), focusing on innovative configurations using graphene-PANI and carbon nanotube (CNT)-PANI composites. We performed a thorough analysis of the morphological, electrophysical, and electrical properties of these materials, ultimately leading to the extraction of key electrical parameters for integration into a finite element model (FEM). This model simulates the entire sensor, enabling the estimation of critical performance metrics such as sensitivity, limit of detection (LOD), linearity, and power consumption. Our findings demonstrate that the CNT-PANI configuration significantly outperforms the laser-induced graphene (LIG)-PANI electrode, achieving a …

Go to article

Predicting The Influence Of Aggregate Size And Distribution On Cementitious Concrete Properties: A Review, Innocent J. Macha Jun 2025

Predicting The Influence Of Aggregate Size And Distribution On Cementitious Concrete Properties: A Review, Innocent J. Macha

Tanzania Journal of Engineering and Technology (TJET)

Cement concrete has been in use for centuries as one of the primary construction materials. Its demand in the construction industry is expected to continue for several centuries before the full development of alternative products. However, one of the main areas of research interest is understanding how its constituents can be tailored to make its properties predictable to reduce risks associated with structural failures, reconstruction and reduced durability. These hindrances associated with cementitious concrete result from several attributes, including constituent material characteristics, mixing ratios and workmanship. Understanding the predictability of cement concrete properties requires computer modelling tools to provide reliable …

Go to article

Comprehensive Review Of Sensible Thermal Storage Systems For Cooking Applications, Anna K. Shariishoy Jun 2025

Comprehensive Review Of Sensible Thermal Storage Systems For Cooking Applications, Anna K. Shariishoy

Tanzania Journal of Engineering and Technology (TJET)

This paper reviewed the sensible thermal storage systems specifically designed for cooking applications. The review focuses on the characteristics of storage materials, their practical applications, and the overall performance of the systems. The review consolidated an array of experimental and numerical research published across various sources such as journals, conferences, books, online resources, and professional reports. A systematic review is used to reach the conclusion of this paper. Significant findings from this study include the wide range of storage capacities attained from small-scale systems that can store ~1–5 MJ of energy for a single meal to bigger systems that can …

Go to article

Optimizing The Processing Temperature For Synthesis Of Silver Nanoparticles Within Cellulose-Wool Keratin Supramolecular Matrix Using Butylmethylimmidazolium Chloride Ionic Liquid, Ngesa E. Mushi Jun 2025

Optimizing The Processing Temperature For Synthesis Of Silver Nanoparticles Within Cellulose-Wool Keratin Supramolecular Matrix Using Butylmethylimmidazolium Chloride Ionic Liquid, Ngesa E. Mushi

Tanzania Journal of Engineering and Technology (TJET)

To date, the synthesis of silver nanoparticles on the surface of cellulose and wool keratin biopolymer, while dissolved in ionic liquid, is attractive because of its biomedical potential. However, the optimal processing temperature for the nanoparticle formation is unclear. The previously reported temperature of approximately 120°C gives unpredictable results. The current study employs a combination of 50% cellulose and 50% keratin, along with 69 mg of silver chloride, in Butylmethylimidazolium Chloride BMImCl ionic liquid, using a single-pot process to produce a supramolecular film via non-derivatized mechanochemical interactions. The primary objective is to experimentally establish the processing temperature to achieve stable …

Go to article

Vacuum Consistent Electrochemistry In Ionic Liquid Combined With Oxide Epitaxy, Yuji Matsumoto Jun 2025

Vacuum Consistent Electrochemistry In Ionic Liquid Combined With Oxide Epitaxy, Yuji Matsumoto

Journal of Electrochemistry

We introduce our state-of-the art of “vacuum consistent electrochemistry” to an investigation of the interfaces between oxides and ionic liquid (IL). Pulsed laser deposition (PLD) has been one of the powerful and sophisticated techniques to realize nanoscale preparation of high-quality epitaxial oxide thin films. On the other hand, electrochemistry is a simple, very sensitive, and non-destructive analysis technique for solid-liquid interfaces. To ensure the reproducibility in experiment of the interfaces of such epitaxial oxide films, as well as bulk oxide single-crystals, with IL, we employ a home-built PLD-electrochemical (EC) system with IL as an electrolyte. The system allows one to …

Go to article

Pm Irras Studies Of Organized Molecular Films At A Gold Electrode Surface, Zhang-Fei Su, Ai-Cheng Chen, Jacek Lipkowski Jun 2025

Pm Irras Studies Of Organized Molecular Films At A Gold Electrode Surface, Zhang-Fei Su, Ai-Cheng Chen, Jacek Lipkowski

Journal of Electrochemistry

This feature article illustrates the potential of polarization modulation infrared reflection absorption spectroscopy (PM IRRAS) to provide molecular-level information about the structure, orientation and conformation of constituents of thin films at electrode surfaces. PM IRRAS relies on the surface selection rules stating that the p-polarized IR beam is enhanced, while the s-polarized beam is attenuated at the metal surface. The difference between p- and s-polarized beams eliminates the background of the solvent and provides IR spectra at a single electrode potential. In contrast, two other popular in situ IR spectroscopic techniques, namely, subtractively normalized interfacial Fourier transform infrared spectroscopy (SNIFTIRS) …

Go to article

Ambient Co2 Capture And Valorization Enabled By Tandem Electrolysis Using Solid-State Electrolyte Reactor, Yan-Bo Hua, Bao-Xin Ni, Kun Jiang Jun 2025

Ambient Co2 Capture And Valorization Enabled By Tandem Electrolysis Using Solid-State Electrolyte Reactor, Yan-Bo Hua, Bao-Xin Ni, Kun Jiang

Journal of Electrochemistry

Electrocatalytic carbon dioxide reduction is a promising technology for addressing global energy and environmental crises. However, its practical application faces two critical challenges: the complex and energy-intensive process of separating mixed reduction products and the economic viability of the carbon sources (reactants) used. To tackle these challenges simultaneously, solid-state electrolyte (SSE) reactors are emerging as a promising solution. In this review, we focus on the feasibility of applying SSE for tandem electrochemical CO2 capture and conversion. The configurations and fundamental principles of SSE reactors are first discussed, followed by an introduction to its applications in these two specific areas, …

Go to article

Cyclic Combustion Pressure Dynamics Of A Diesel Engine Operating On Waste Frying Oil Biodiesel Blends Using Wavelets, Shady Elmozy, Ahmed Khaira Dr., Elshenawy Elshenawy Prof. Dr., Ali Mohamed Dr., Medhat Elkelawy Prof. Dr, Jun 2025

Cyclic Combustion Pressure Dynamics Of A Diesel Engine Operating On Waste Frying Oil Biodiesel Blends Using Wavelets, Shady Elmozy, Ahmed Khaira Dr., Elshenawy Elshenawy Prof. Dr., Ali Mohamed Dr., Medhat Elkelawy Prof. Dr,

Journal of Engineering Research

This paper investigates the cyclic combustion pressure dynamics of a single-cylinder diesel engine burning waste frying oil biodiesel blends, employing statistical analysis and continuous wavelet transform (CWT) to evaluate combustion stability. Experiments were conducted at a constant engine load (90%) and speed (1500 rpm), with in-cylinder pressure data collected over 400 consecutive cycles for conventional diesel (RD) and biodiesel blends (UB10, UB30, UB50). Results demonstrate that biodiesel blends marginally reduce average peak cylinder pressure (PP) by 0.3–3.8% while lowering PP variability, evidenced by declining coefficients of variation (COV-PP: 1.27–1.48%), attributed to biodiesel’s elevated viscosity promoting consistent fuel-air mixing. Conversely, mean …

Go to article

Combustion Characteristics And Cycle-To-Cycle Variations In A Diesel Generator Fueled With Used Frying Oil Biodiesel Blends, Shady Elmozy, Ahmad Khira Dr., E. A. El Shenawy Prof. Dr., Medhat Elkelawy Prof. Dr, Eng. Jun 2025

Combustion Characteristics And Cycle-To-Cycle Variations In A Diesel Generator Fueled With Used Frying Oil Biodiesel Blends, Shady Elmozy, Ahmad Khira Dr., E. A. El Shenawy Prof. Dr., Medhat Elkelawy Prof. Dr, Eng.

Journal of Engineering Research

This paper investigates the combustion characteristics and cycle-to-cycle variations in a stationary direct-injection diesel generator fueled with biodiesel derived from used frying oil (UFO) blended with conventional diesel. Used frying oil methyl ester (UFOME), referred to as UB100, was produced through a single-step alkali transesterification process and blended with diesel fuel in varying proportions (UB10, UB20, UB30, UB40, and UB50). Experiments were conducted on a single-cylinder, naturally aspirated diesel engine operating at a constant speed of 1500 rpm under five different load conditions: 0%, 25%, 50%, 75%, and 90%. In-cylinder pressure data from 400 consecutive cycles were analyzed to determine …

Go to article

Effect Of Household Oil Contamination And Agricultural Soil Contamination On Phyllosilicate Nanocatalyst Performance During Pyrolysis Of Polyolefins, Joey Velasquez Jun 2025

Effect Of Household Oil Contamination And Agricultural Soil Contamination On Phyllosilicate Nanocatalyst Performance During Pyrolysis Of Polyolefins, Joey Velasquez

Master's Theses

The effect of household oil and agricultural soil contamination on catalyst performance during polyolefin pyrolysis was simulated on mixed virgin plastic pellets by evaluating contamination influence on mixed plastic degradation temperatures. Three phyllosilicate nanocatalysts including Fulcat435, Fulcat22F and Y-Zeolite were evaluated in this work based on a literature review of catalyzed plastic pyrolysis and these catalysts’ ability to lower plastic decomposition temperature by 50 °C – 100 °C. These findings were confirmed in this research through thermogravimetric analysis of a polyolefin mixture and further developed in furnace experiments containing household oil and agricultural contamination. Household oil contamination deactivated each of …

Go to article

Chemical Recycling Of Pet Plastic Waste, Charlie Parker, Benjamin Puga, Jake Verschoor Jun 2025

Chemical Recycling Of Pet Plastic Waste, Charlie Parker, Benjamin Puga, Jake Verschoor

Materials Engineering

The growing accumulation of plastic waste, specifically polyethylene terephthalate (PET), has driven the need for more efficient and scalable chemical recycling methods. This study investigated the methanolysis of PET using zinc oxide (ZnO) nanoparticles as a catalyst and tetrabutylammonium chloride (NBu₄Cl) as an ionic liquid, aiming to reduce methanol consumption while achieving high PET conversion efficiency. ZnO nanoparticles were synthesized via wet chemistry and characterized using Dynamic Light Scattering (DLS), which showed an average particle size of 13.5 nm with a polydispersity index of 0.1556, indicating a moderately-high monodisperse distribution of particles sufficient for reactions. The main conversion product, dimethyl …

Go to article

Interaction Of Liquid Phase Diisopropyl Methyl Phosphonate (Dimp) With Material Surrogates For Components Of Soil And Combustion Products Of Metal Fuels, Khushi Sunil Patel May 2025

Interaction Of Liquid Phase Diisopropyl Methyl Phosphonate (Dimp) With Material Surrogates For Components Of Soil And Combustion Products Of Metal Fuels, Khushi Sunil Patel

Theses

Combustion products of three different Al-based materials, Al-CaCO3, Al-SiO2, and Al-Fe2O3 , have been produced to understand their interaction with liquid diisopropyl methyl phosphonate (DIMP), a surrogate for chemical weapon agents. The purpose of this is to see which materials were more effective at DIMP adsorption and decomposition at different temperatures. Prepared materials were characterized using electron microscopy, x-ray powder diffraction, and nitrogen adsorption. Prepared powders were submerged in DIMP and heated in a thermal analyzer, tracking the mass changes as a function of temperature. Surfaces of the recovered materials were studied using …

Go to article

Understanding The Morphology And Mass Transport Resistance Of Mesoporous Carbon-Supported Pemfc Based On Modeling Analysis, Hao Deng, Jia Liu, Zhong-Jun Hou May 2025

Understanding The Morphology And Mass Transport Resistance Of Mesoporous Carbon-Supported Pemfc Based On Modeling Analysis, Hao Deng, Jia Liu, Zhong-Jun Hou

Journal of Electrochemistry

Mesoporous carbon supports mitigate Pt sulfonic poisoning through nanopore-confined Pt deposition, yet their morphological impacts on oxygen transport remain unclear. This study integrates carbon support morphology simulation with an enhanced agglomerate model to establish a mathematical framework elucidating pore evolution, Pt utilization, and oxygen transport in catalyst layers. Results demonstrate dominant local mass transport resistance governed by three factors: (1) active site density dictating oxygen flux; (2) ionomer film thickness defining shortest transport path; (3) ionomer-to-Pt surface area ratio modulating practical pathway length. At low ionomer-to-carbon (I/C) ratios, limited active sites elevate resistance (Factor 1 dominant). Higher I/C ratios improve …

Go to article

Preparation And Modification Of Mxene Composites For Application In Electrochemical Energy Storage, Zhang-Hai You, Ding-Ze Lu, Kiran Kumar Kondamareddy, Wen-Ju Gu, Peng-Fei Cheng, Jing-Xuan Yang, Rui Zheng, Hong-Mei Wang May 2025

Preparation And Modification Of Mxene Composites For Application In Electrochemical Energy Storage, Zhang-Hai You, Ding-Ze Lu, Kiran Kumar Kondamareddy, Wen-Ju Gu, Peng-Fei Cheng, Jing-Xuan Yang, Rui Zheng, Hong-Mei Wang

Journal of Electrochemistry

With the acceleration of advanced industrialization and urbanization, the environment is deteriorating rapidly, and non-renewable energy resources are depleted. The gradual advent of potential clean energy storage technologies is particularly urgent. Electrochemical energy storage technologies have been widely used in multiple fields, especially supercapacitors and rechargeable batteries, as vital elements of storing renewable energy. In recent years, two-dimensional material MXene has shown great potential in energy and multiple application fields thanks to its excellent electrical properties, large specific surface area, and tunability. Based on the layered materials of MXene, researchers have successfully achieved the dual functions of energy storage and …

Go to article

Theoretical Insights Into The Atomic And Electronic Structures Of Polyperyleneimide: On The Origin Of Photocatalytic Oxygen Evolution Activity, Yi-Qing Wang, Zhi Lin, Ming-Tao Li, Shao-Hua Shen May 2025

Theoretical Insights Into The Atomic And Electronic Structures Of Polyperyleneimide: On The Origin Of Photocatalytic Oxygen Evolution Activity, Yi-Qing Wang, Zhi Lin, Ming-Tao Li, Shao-Hua Shen

Journal of Electrochemistry

Polymeric perylene diimide (PDI) has been evidenced as a good candidate for photocatalytic water oxidation, yet the origin of the photocatalytic oxygen evolution activity remains unclear and needs further exploration. Herein, with crystal and atomic structures of the self-assembled PDI revealed from the X-ray diffraction pattern, the electronic structure is theoretically illustrated by the first-principles density functional theory calculations, suggesting the suitable band structure and the direct electronic transition for efficient photocatalytic oxygen evolution over PDI. It is confirmed that the carbonyl O atoms on the conjugation structure serve as the active sites for oxygen evolution reaction by the crystal …

Go to article

Three-Dimensional Melamine Carbon Sponge/Nai As Cathode Materials For Sodium-Ion Batteries, Qian-Ying Huang, Yue Liu, Zi-Xin Lin, Shu-Yi Zheng, Ting-Ting Mei, Yu-Ting Tang, Ying-He Zhang, Jun Liu May 2025

Three-Dimensional Melamine Carbon Sponge/Nai As Cathode Materials For Sodium-Ion Batteries, Qian-Ying Huang, Yue Liu, Zi-Xin Lin, Shu-Yi Zheng, Ting-Ting Mei, Yu-Ting Tang, Ying-He Zhang, Jun Liu

Journal of Electrochemistry

The sodium-iodine (Na-I) battery exhibits significant potential as an alternative energy storage device to the lithium-ion battery. However, its development is hindered by inadequate electrical and thermal stability, as well as the dissolution and shuttling of polyiodide. In this study, we report a preparation method for melamine carbon sponge (MC) via carbonizing a commercially available kitchen sponge. It was revealed that the as-prepared MC, composed of unique self-growing carbon nanotubes, could provide both physical and chemical adsorption capabilities for intermediate polyiodides to improve the electrochemical performance of NaI. Consequently, the NaI/MC electrode effectively minimized polyiodide dissolution and reduced the electrochemical …

Go to article

Zn–Assisted Synthesis Of M (Mn/Fe/Co/Ni)-N-C Catalysts For Multifunctional Electrochemical Activity, Kemila A. Chaudhary May 2025

Zn–Assisted Synthesis Of M (Mn/Fe/Co/Ni)-N-C Catalysts For Multifunctional Electrochemical Activity, Kemila A. Chaudhary

Electronic Theses & Dissertations

The design and development of atomically dispersed M-N-C catalysts (metal (M) supported on an nitrogen-carbon (NC) matrix with high multifunctional electrocatalytic performance is desirable but proved to be very challenging. Herein, we synthesized M-N-C catalysts (M = Fe, Co, Mn, and Ni) using Zn-assisted high temperature treatment and characterized using various techniques. The prepared catalysts were tested for their electrocatalytic performance towards oxygen and hydrogen evolution reaction (OER and HER) as well as oxygen reduction reaction (ORR) in alkaline media. The results indicated that Mn-N-C catalyst showed higher performance towards both the ORR (E1/2 = 0.90 V) and …

Go to article

Ultrafast Laser Surface Structuring For Wettability Control On Copper, Akshay Arvind Nagvenkar May 2025

Ultrafast Laser Surface Structuring For Wettability Control On Copper, Akshay Arvind Nagvenkar

All Theses

Wettability is a crucial surface property influencing various phenomena, including heat transfer, cell adhesion, and corrosion. Engineering devices can achieve superior performance by precisely manipulating surface wettability. As a result, extensive research has focused on developing surfaces that exhibit either extreme water attraction (superhydrophilic) or strong water repellency (superhydrophobic). Tailoring surface wettability paves the way for numerous applications, such as drag reduction in marine vessels, controlled drug delivery, efficient water collection, advanced liquid transport systems, oil-water separation, anti-corrosion coatings, friction reduction, and self-cleaning materials. Ultrafast laser surface structuring is a promising approach for engineering multifunctional surfaces, effectively modifying material properties …

Go to article

The Effect Of Catalyst Choice On Biodiesel Yield And Quality Using Waste Cooking Oil As A Feedstock, Neka Long May 2025

The Effect Of Catalyst Choice On Biodiesel Yield And Quality Using Waste Cooking Oil As A Feedstock, Neka Long

Honors Theses

Biodiesel is one current area of interest as a replacement for traditional diesel fuel. Benefits of biodiesel include that it can be derived from renewable resources, and it possesses properties similar to that of traditional diesel fuel. Biodiesel is often produced through a catalyzed transesterification process, which involves the use of a catalyst to aid in the conversion of triglycerides into alkyl esters. A method called the transesterification double step process (TDSP) was researched and used in this project due to the success seen using this method for the conversion of waste cooking oil to biodiesel. In this project, four …

Go to article

Production Of Potassium-Rich Biofertilizer From Composted Banana Peels And Watermelon Rinds, Neema O. Msuya Apr 2025

Production Of Potassium-Rich Biofertilizer From Composted Banana Peels And Watermelon Rinds, Neema O. Msuya

Tanzania Journal of Engineering and Technology (TJET)

This study investigated the production of biofertilizer from composted banana peels and watermelon rinds, focusing on the mineral content and its impact on plant growth. The process involved characterizing raw materials, producing biofertilizer, analyzing mineral concentrations (potassium, nitrogen and phosphorus), and evaluating its quality through Spiny Amaranth seed growth. A compost bin with three compartments was designed, testing three composting ratios of banana peels to watermelon rinds (2:1, 1:2 and 1:1). Composting was monitored on moisture content, pH, organic matter, and temperature for 37 days. The 1:1 ratio had the lowest temperature (33.45°C) and highest pH (7.08), while the 2:1 …

Go to article

First Prev Next Last