Bioresource and Agricultural Engineering Commons^™

Vineyard Drip Irrigation Design, Roman Ferro

BioResource and Agricultural Engineering

The goal of this project is to develop a cost and water efficient drip irrigation system. This irrigation system will deliver irrigation needs to a future 2.5 acre vineyard owned by the Jaqua family. The design accounts for the specifics of the field such as soil type, slope, crop water requirement, etc. A detailed design was created which includes part specifications, cost estimate and field map.

Design And Evaluation Of An Irrigation System For Meyer Lemons, Anthony Atchley

BioResource and Agricultural Engineering

This senior project discusses the design and implementation procedures for an irrigation system for Meyer lemons. The irrigation system is designed from an economical standpoint incorporating limitations set by the ranch manager such as the use of existing pipe lines and emitter selection preference. Within this project there are the steps taken to ensure a healthy crop utilizing the data and advice collected from other fields and their managers in the same area.

The entire field is run as a single set with two manifolds to supply the Western and Eastern ends of the field. A total of 555 trees …

Pressure Regulating Valve Pilot Characteristics - 2-Way Vs. 3-Way Pilots, Charles M. Burt, Kyle Feist

BioResource and Agricultural Engineering

Pressure regulation valves, with 3” – 6” diameters, are commonly found at the entrance to agricultural irrigation blocks and manifolds. These valves are typical of a “hydraulic” design, in which a chamber above a flexible disc/diaphragm is filled or emptied. As the chamber is filled or emptied, the irrigation water passes through a smaller or larger orifice, and the pressure downstream of the valve is lowered, increased, or maintained at a constant target pressure. The flow in/out of the chamber is controlled by a small “pilot valve”. The characteristics of these pilot valves are discussed here, in general terms. Of …

Pipeline And Canal Downstream Control System For Recirculation - Patterson Id Case Study, John Sweigard, Charles M. Burt, Peter Rietkerk

BioResource and Agricultural Engineering

Patterson ID in Central California has five long, along-the-contour lateral canals that flow northward from a main canal. The main canal operates on downstream control, providing excellent flexibility to heads of the laterals. The lateral canals operate with manual upstream control and have little storage. The classic tail-ender problem existed; spill from the tail end was necessary to avoid under-supplying tail-end customers.

To eliminate the spill and to provide better flexibility, a system was designed and constructed to tie the ends of the five laterals together with pipes and pumps, with one central regulating reservoir. The automatic control system allows …

Development And Evaluation Of Ordinary Least Squares Regression Models For Predicting Irrigated And Rainfed Maize And Soybean Yields, Vivek Sharma, Daran R. Rudnick, Suat Irmak

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Understanding the relationships between climatic variables and soil physical and chemical properties with crop yields on large scales is critical for evaluating crop productivity to make better assessments of local and regional food security, policy, land and water resource allocation, and management decisions. In this study, ordinary least squares(OLS) regression models were developed to predict irrigated and rainfed maize and soybean yields at the county level as a

function of explanatory variables [precipitation (P), actual crop evapotranspiration (ETa), organic matter content (OMC), cation exchange capacity (CEC), clay content (CC), and available soil water capacity (ASW)] of the dominant soil type …

Sbx7 Flow Rate Measurement Compliance For Agricultural Irrigation Districts, Charles M. Burt, Evan Geer

BioResource and Agricultural Engineering

Senate Bill x7-7 (SBx7-7) requires documented volumetric accounting to individual turnouts for water deliveries. Section 597.3 of the bill lists two very different requirements for devices. This document examines the requirements of SBx7 and the implications for agricultural irrigation districts. The definitions and impacts of flow rate and volumetric accuracy are defined. Example scenarios and solutions are offered, as well as descriptions of applicable devices.

Effects Of Sprinkler, Partial Sprinkler/Drip, And Drip Only Irrigation On Strawberry Transplants 2011-2012, Stuart Styles

BioResource and Agricultural Engineering

The Cal Poly Irrigation Training and Research Center (ITRC), in collaboration with academic, water district, and industry partners, proposes to evaluate new strategies for drip irrigation on strawberries to minimize runoff during transplant establishment.

The most common method used for irrigating strawberries is a mix of sprinkler irrigation and drip. Growers use sprinkler irrigation for bed preparation and salinity control, then eventually switch to drip irrigation after transplanting, but continue to use sprinkler irrigation as an insurance policy (for bonding between plant roots and soil bonding, washing off the leaves, controlling salinity, and frost). However, field observations have shown that …

Implementation Of Magnetic Meters For Irrigation Volumetric Measurement, Stuart Styles, Lynn Groundwater

BioResource and Agricultural Engineering

The irrigation industry is experiencing a growth in the use of magnetic meters for measuring the flow rate and volume in irrigation pipelines. Historically, propeller meters have been the device selected by users. New legislation in California (SB7x7) will require measurement devices at key locations for irrigation water delivery. Some users are very interested in the magnetic meter for making the measurement at the turnout or farm gate. The key feature of the new meter is the ability for the device to work in less than ideal flow conditions. Electromagnetic meters have been tested by the Irrigation Training and Research …

Solid Set Sprinkler Design For An Apricot Orchard, Kyle Moeller

BioResource and Agricultural Engineering

The goal of this project was to design a solid set sprinkler system as well as a cost analysis for a 60 acre field. This allows for water to be distributed throughout an entire field at low flow rates allowing water to be used more efficiently and effectively. Completing a design such as this will allow some cost saving by the farmer throughout the systems use.

Wine Grape Irrigation Management, Charles M. Burt

BioResource and Agricultural Engineering

This report addresses difficulties in calculating correct ET values for wine grapes, and includes tips for wine grape irrigation scheduling, regulated deficit irrigation, and soil moisture measurement, and crop canopy cover estimates.

On-Farm Irrigation Tracking Software For The Imperial Valley, Taylor Andrew Brady

BioResource and Agricultural Engineering

In order to improve on farm irrigation, a water scheduling program specific to the needs of Imperial Valley farmers will be created. The program will help keep track of daily water schedules, as well as stay connected with the farm personnel to reduce error and save time. The program will help with on farm operations and productivity by allowing the famer, irrigation foremen, and secretary to view the same schedule simultaneously. The information that is inputted into the program will be editable by all the chosen personnel, to keep everyone on the same page. Weekly, monthly, or yearly usage reports …

Basin-Wide Remote Sensing Of Actual Evapotranspiration And Its Influence On Regional Water Resources Planning, Daniel J. Howes, Charles M. Burt, Kyle Feist

BioResource and Agricultural Engineering

The Irrigation Training & Research Center (ITRC) at Cal Poly State University, San Luis Obispo has been using METRIC to compute actual evapotranspiration from remote sensing sources (namely LandSAT images). The driving force behind this is the increasing need for improved evapotranspiration information on a large scale. A recent study in the Mexicali Valley of Baja California, Mexico utilized the ITRC-modified METRIC procedure to compute the crop and riparian evapotranspiration component of a basin-wide water balance. The resulting comparison between the mass balance computed change in groundwater storage and that computed using groundwater elevation data showed excellent agreement. For water …

Pump Performance With Sand Wear, Charles M. Burt, Kyle Fesit

BioResource and Agricultural Engineering

In many installations, pump performance declines over time due to sand wear. In order to pinpoint the type and rate of wear caused by pumping water with higher-than-average sand concentrations and its direct effect on various pump impeller materials, vertical pump impeller/bowl assemblies of approximately 900 GPM were each pumped for up to 2500 hours with high concentrations of sand in the water. Two different impeller materials were used for a total of five configurations. Well pump operation was simulated by maintaining a constant discharge pressure. The degrading performance, in terms of changing flow rate and kilowatt load, was recorded …

Irrigation Engineering In Seismic Zones - Mexicali Valley, Mexico, Alan Dennis Gracia, Charles M. Burt, Mario Paredes Vallejo

BioResource and Agricultural Engineering

On April 4, 2010 an earthquake of Richter magnitude 7.2 occurred with an epicenter south of Mexicali within the irrigated zone of Mexicali Valley. Extensive damage occurred to main and lateral canal structures, plus to field irrigation systems and the main drainage network. This paper describes the engineering for a new major irrigation water conveyance system to service the most heavily impacted zone of 80,000 acres. Considerations included identification of the causes of the damage, selection of canal versus pipeline, relocation costs of people along new routes, and improved flexibility of water delivery. Major investigations regarding soils, topography, etc. were …

Agricultural Irrigation Using Municipal Effluent, Charles M. Burt

BioResource and Agricultural Engineering

The paper describes the development of a design and management plan for disposing of secondary effluent originating in the urban communities. It highlights the differences in approach that a public utility must take, versus a typical agricultural irrigation application. Costs and requirements for municipal effluent irrigation are many times greater. The complexity of regulations and agency procurement procedures relegates the actual irrigation system design to a relatively small role in the total project.

The Irrigation Sector Shift From Construction To Modernization: What Is Required For Success?, Charles M. Burt

BioResource and Agricultural Engineering

External pressures related to environmental protection, commodity prices, energy availability, larger populations, and climate change have combined to require an immediate and substantial improvement in agricultural irrigation performance. Worldwide progression towards modernized irrigation projects has been uneven and slower than desired, but decades of irrigation modernization development have clarified certain requirements for success, as well as illuminated indicators of project failure. Of particular importance are required shifts within the state and national irrigation bureaucracies, as well as universities.

Effects Of Sprinkler, Partial Sprinkler/Drip, And Drip Only Irrigation On Strawberry Transplants 2010-2011, Stuart Styles

BioResource and Agricultural Engineering

The purpose of the project is to develop an analysis of the current irrigation practices of the strawberry growers on the Central Coast of California. The primary research evaluation is during the establishment of transplants where sprinklers are typically used even though drip irrigation is available. Growers have been selected from Oxnard, Santa Maria, and Watsonville to provide a good cross section of the different strawberry growing areas.

The specific objectives of the project are to: (1) set up a research areas and control plots on a demonstration scale, (2) determine the key factors that affect the problems in early …

Strawberries: Effects Of Modifying Irrigation Methods For Transplant Establishment, Stuart Styles, Lynn Groundwater, Curtis Lutje

BioResource and Agricultural Engineering

In 2009, the Cal Poly Irrigation Training and Research Center began a multi-year analysis of the current irrigation practices of strawberry growers on the Central Coast of California. Specifically, the project examines the impacts of salinity on young strawberry transplants and the current practice of sprinkler use during the establishment of transplants for salinity control in areas where drip irrigation is available. The overall goal of the project is to study current practices and determine any conditions where growers can minimize or eliminate sprinkler use on strawberries, thereby conserving water, saving pumping costs, and reducing runoff. Results from the first …

Implementation And Field Calibration Pipeline Doppler Meters In Northern California, Stuart Styles

BioResource and Agricultural Engineering

The Tehama-Colusa Canal Authority (TCCA) has been using SonTek Doppler flow meters at approximately 30 installations for about 3 years. TCCA is located in northern California with its headquarters in Willows. The Cal Poly ITRC compared the accuracy of the flow measurement readings from the new Doppler flow meters to the venturi meters that were installed by the US Bureau of Reclamation (USBR). The venturis were used as the historical standard for flow measurement for TCCA. TCCA has opted to move away from the existing technology for a variety of reasons, especially due to the issue concerning access requirements for …

Characteristics Of Irrigation Pump Performance In Major Irrigated Areas Of California, Charles Burt

BioResource and Agricultural Engineering

Pumping data was collected from over 15,000 well and non-well pumps throughout the Sacramento, Salinas, and San Joaquin Valley groundwater basins of California. Each of these basins is divided into a number of subbasins. A map of the general layout is shown below (gray lines outside of basins represent county lines; gray lines inside basins represent subbasins).

Data was analyzed by basin and subbasin for well pumps and non-well pumps. For each pump type, averages were calculated based on:

• The whole basin
• Overall pumping plant efficiency (OPPE)
• kWh/AF
• Subbasins

General conclusions were drawn for each set of averages, and a …

Irrigation System Components And Potentials For Energy Conservation, Charles M. Burt

BioResource and Agricultural Engineering

On-site electricity conservation in irrigation can be accomplished through a series of general steps. The primary focus of the agricultural energy conservation programs of the utilities has been to improve the efficiency of the pumping plant. In general, the electric utilities have provided or subsidized pump testing, along with some form of rebate for replacement or repair of pumps. There are, of course, other irrigation-related aspects of energy conservation. However, this report focuses on on-site electricity conservation in the field.

Design Of A Micro Irrigation System For An Almond Orchard, Adam Scheuber

BioResource and Agricultural Engineering

The owners of Scheuber Farms, a 1,000 acre row crop farming operation located in Patterson, California, wish to convert a 15-acre field into an almond orchard. For irrigating the trees, they would like to use a microsprayer irrigation system. The design I recommend and describe in this paper utilizes proper hydraulic analysis, and is based on the ability to supply enough water to match the amount of water required by the orchard during the peak month of an average year.

All of the major components and parameters of the microsprayer irrigation system were designed at minimal cost while ensuring that …

Agricultural Water Energy Efficiency: Final Report, Charles M. Burt, Dan J. Howes, Beau Freeman

BioResource and Agricultural Engineering

Beginning in 2007, the Irrigation Training and Research Center (ITRC) at California Polytechnic State University, San Luis Obispo, contracted with the California Energy Commission’s (CEC) Public Interest Energy Research (PIER) Program to undertake a large, multi-tiered study on agricultural water energy efficiency in California. The study was broken into the following research tasks: Task 1: Administrative; Task 2.1: Irrigation district energy survey; Task 2.2: Conversion to groundwater pumping with drip/ micro irrigation systems; Task 2.3: GIS-based water scheduling and software system; Task 3: Irrigation component energy analysis; Task 4: RD&D competitive solicitation; Task 5; Technology transfer. The resulting survey, research, …

Pipeline Design For Reclaimed Spill Water For West Stanislaus Irrigation District, Daniel Bays

BioResource and Agricultural Engineering

The goal of this project was to design a pipeline that could be installed to replace an existing drain in West Stanislaus Irrigation District.  The pipeline would give the district the ability to divert drain water back into their delivery system or send water down the existing drain.

The design attempted to use pipe and material the district already has and provided construction drawings and installation instructions for the construction of this design in the future.

Economic Analysis Of Reverse Osmosis Desalination Of Water For Agricultural Irrigation Applications, Ashley Hemping

BioResource and Agricultural Engineering

The combination of an ever-increasing population and a diminishing usable water supply threatens the sustainability of humanity’s existence on a global scale, especially in California, where agriculture is so integral to the state’s economy.  Due to widespread recognition of this problem, there has been a growing trend in the development of alternative water resources, one of which involves the desalination of salt or brackish waters.  Several different desalination technologies exist, including microfiltration, multi-stage flash, and multi-effect distillation.

This senior project investigates the economic viability of implementing reverse osmosis desalination for treatment of agricultural wastewater or other unusable water sources.  These …

Gis-Based Irrigation District Flow Routing/Scheduling, Charles M. Burt, Beau Freeman

BioResource and Agricultural Engineering

In 2007, the Irrigation Training and Research Center (ITRC) at California Polytechnic State University, San Luis Obispo undertook to develop a prototype of an intelligent and scalable real-time GIS-based water scheduling and routing software system for irrigation districts, capable of integrating multiple data sources into an information access and management facility featuring collaborative tools with automatic reasoning and analytical capabilities. Improving the infrastructure and management capabilities of irrigation districts in order to provide flexible delivery schedules and increase participation in peak demand reduction programs has been identified as having a significant potential to achieve energy conservation and resource efficiencies.

The …

Canal Lining, Charles M. Burt

BioResource and Agricultural Engineering

Larry and I thought that some musings about canal lining might be of some interest for some of you USCID newsletter readers. As you know, there are many canal lining techniques – especially if one considers the wide assortment of internationally used lining methods.

Variable Frequency Drive (Vfd) Controlled Irrigation Pumps – Analysis Of Potential Rebate, Charles M. Burt

BioResource and Agricultural Engineering

Well pumps, booster pumps, and a combination of the two are used throughout the agricultural sector to provide water for on-farm irrigation. However, the pump discharge pressures for the majority of irrigation systems are excessive, waiving considerable monetary and power consumption savings. This report analyzes the numerous potential benefits of integrating a variable frequency drive (VFD) to irrigation supply systems and modifying system design philosophies.

Low Pressure Drip/Micro System Design – Analysis Of Potential Rebate, Charles M. Burt, Daniel J. Howes

BioResource and Agricultural Engineering

Drip/micro irrigation systems are often referred to as “low pressure” systems because the required emitter pressures are relatively low (6-12 psi). However, the pump discharge pressures of systems on flat ground throughout California average 40 psi. This report examines readily attainable system losses by examining individual components of the drip/micro system.

Irrigation District Flow Metering, Charles M. Burt

BioResource and Agricultural Engineering

Most readers of this publication are probably somewhat familiar with USBR Reclamation Reform Act requirements for measurement of water deliveries to farm turnouts, in cases where the water is supplied by Reclamation facilities. Basically, volumes within the Mid-Pacific Region are supposed to be measured within ±6%. This sounds like a fairly straightforward requirement, but the reality is anything but simple.