Bioresource and Agricultural Engineering Commons^™

Characteristics Of Pump Performance In Major Irrigated Areas Of California, Sierra A. Orvis Layous, Charles M. Burt, Luis P. Urrestarazu

BioResource and Agricultural Engineering

Well pump tests (12,876) in three Central California groundwater basins were characterized and described according to their spatial distribution. The average overall pumping plant efficiency (wire-water, not including column losses and velocity head) was about 56%. Characteristics such as drawdown, total dynamic heads, kW, and flow rate vary greatly between pumps within and between sub-basins. This is the first well pump characterization of its type in California, although irrigation pump tests have been conducted for over 70 years in California. This paper provides a summary of the spatial variation of well pump performance and characteristics.

The Irrigation Sector Shift From Construction To Modernization: What Is Required For Success?, Charles M. Burt

BioResource and Agricultural Engineering

External pressures related to environmental protection, commodity prices, energy availability, larger populations, and climate change have combined to require an immediate and substantial improvement in agricultural irrigation performance. Worldwide progression towards modernized irrigation projects has been uneven and slower than desired, but decades of irrigation modernization development have clarified certain requirements for success, as well as illuminated indicators of project failure. Of particular importance are required shifts within the state and national irrigation bureaucracies, as well as universities.

Irrigation District Turnouts, Charles M. Burt

BioResource and Agricultural Engineering

This is meant to be a very quick, roughly written primer on irrigation district turnout selection. It by no means covers all of the details, but it might help out. ITRC offers flow measurement classes, with online registration at www.itrc.org. We have also done testing on quite a few designs over the years, but the work was almost all confidential in nature.

Modernización De Proyectos De Riego, Charles M. Burt

BioResource and Agricultural Engineering

Un diseño moderno es el resultado de un proceso de reflexión, el cual selecciona la configuración y componentes físicas considerando un programa de operación bien definido y realista basado en el concepto de servicio.

Medición De Gasto En Canales De Riego Y...Otras Cosas, Charles M. Burt

BioResource and Agricultural Engineering

Nuestra opción preferida para Eiqupos de “flujo crítico ” (vertedor or aforador) son Aforadores Replogle (Garganta Larga)

Commercial Sand Media Filter Tank Criteria For Energy Efficiency - Agricultural Drip Irrigation, Charles M. Burt

BioResource and Agricultural Engineering

Sand media filters are commonly used in agricultural drip irrigation systems. They have the advantages of simplicity and large capacities, and are favored by many farmers and designers over other filtration hardware. The primary justification for the research described in this report was to determine if it is possible and reasonable to use lower-than-accepted backflush pressures and thereby reduce the total pressure requirement for drip systems.

Strawberries: Effects Of Modifying Irrigation Methods For Transplant Establishment 2009-2010, Stuart Styles

BioResource and Agricultural Engineering

The purpose of the project is to develop an analysis of the current irrigation practices of the strawberry growers on the Central Coast of California. The primary research evaluation is during the establishment of transplants where sprinklers are used even though drip irrigation is available. This project has targeted the impacts of salinity on the young strawberry transplants.

The specific objectives of the project are to: (1) Set up a research areas and control plots on a demonstration scale, (2) determine the key factors that affect the problems in early growth of transplanted strawberries, (3) determine relationships between the use …

Practical Experience With State-Of-The-Art Technologies In Scada Systems, Beau Freeman, Charles M. Burt

BioResource and Agricultural Engineering

A Supervisory Control and Data Acquisition (SCADA) system is a powerful tool which, when implemented properly in irrigation districts, can lead to improved water delivery service to farms, more effective operations, reduced spill (and therefore reduced diversions), and in some cases a reduction in costs (less labor, less energy, etc.). However, widespread adoption of SCADA and automation technologies remains a technical and financial challenge for most irrigation districts. In spite of many good hardware and software products available on the market now, putting all the pieces together requires specialized expertise. Nevertheless, by following some straightforward strategies and rules of good …

Reducing The Cost Of Pumping Irrigation Water, Derrel L. Martin, William L. Kranz, Tom W. Dorn, Steve R. Melvin, Alan J. Corr

Department of Agricultural and Biological Systems Engineering: Presentations and White Papers

Irrigation accounts for a large portion of the energy used in Nebraska agriculture. The cost to pump irrigation water depends on the type of energy used to power the pumping unit. This document describes a method to estimate the cost of pumping water and to compare the amount of energy used to that for a well maintained and designed pumping plant. The results can help determine the feasibility of repairing the pumping plant.

Pump Operation With Vfd Controlled Motors, Charles M. Burt

BioResource and Agricultural Engineering

There are numerous reasons to consider using a VFD (variable frequency drive) controller with pumps in irrigation and drainage.These include: 1

1. Proper matching of the pump characteristics with the system. Reasonable engineers and salespersons will almost always overdesign pumps. It is very simple – if the pump is too small, there will be complaints. If, on the other hand, the pump delivers a bit more pressure than needed, there is rarely a complaint. Reasons to overdesign include:

Updating The Nebraska Pumping Plant Performance Criteria, William Kranz, Derrel L. Martin, Dean Patterson, Jerry Hudgins, Simon Van Donk, C. Dean Yonts

Department of Agricultural and Biological Systems Engineering: Presentations and White Papers

Irrigation water is removed from groundwater storage using deep well turbine pumps powered by electric motors or diesel, gasoline, propane, ethanol, or natural gas internal combustion engines. For best operating efficiency irrigation power units are selected to specifically meet the requirements of the irrigation system that include how deep the water in the well is under pumping conditions, the water pressure required at the pump outlet, and the system flow rate. The evaluation of pumping plants to establish pumping plant performance dates back into the 1950’s when researchers at the University of Nebraska were unable to directly compare the operation …

Where Is All That Water Going?, Charles M. Burt

BioResource and Agricultural Engineering

Some have proposed to conserve 4-6 Million AF/yr in Agriculture with pragmatic, economical measures. All we need to do is find the inefficiencies. Then we'll get rid of them.

Water Conservation's Role In California Water Transfers, Charles M. Burt

BioResource and Agricultural Engineering

This paper describes various irrigation district water transfer projects. Water transfers have been of many types, including agriculture to agriculture, agriculture to urban, and agriculture to environment. In each case that will be described, the unique circumstances of each district will be described. Typical actions include developing a water balance to determine if “wet water” truly exists for conservation, then identifying the sources of that wet water. Subsequent actions include developing designs that will conserve the water, achieving board approval, and constructing and implementing the conservation measures.

Variability Within Irrigated Fields, Charles M. Burt, Byron Clark

BioResource and Agricultural Engineering

In agricultural production and research, it is common to represent fields as uniform areas. For example, fertilizers, soil amendments, and other inputs have traditionally been applied uniformly (or as uniformly as possible) based on estimated needs for the field as a whole (or as an “average”).

Of course, it is also recognized that fields are not truly uniform with respect to soil characteristics, uniformity of applied water, pest pressures, fertility needs, crop growth and yield, and other characteristics. With the emergence and refinement of variable rate application technology, many growers now attempt to maximize returns by “prescribing” variable amounts of …

Evaluation Of Magnetic Meters For Irrigation Pipeline Measurement, Stuart Styles, Bryan Busch

BioResource and Agricultural Engineering

Magnetic flow meters are used to measure the flow rate of a liquid in a closed pipeline. This type of meter is becoming increasingly popular for measurement with agriculture applications. Electromagnetic meters were tested by the Irrigation Training and Research Center in pipelines located less than the 10 diameters upstream of disturbances with good results. Results show that location guidelines for placing a magnetic meter can be decreased even for turbulent conditions. This paper will discuss how a magnetic flow meter works, advantages and disadvantages of this type of meter, test results, and new guidelines for field applications.

Canal Seepage Reduction By Soil Compaction, Charles M. Burt, Marcus Gardenas, Mohamed Grissa

BioResource and Agricultural Engineering

Large-scale tests were conducted of in-place compaction of irrigation district earthen canal bottoms and sides. Five canal pools with sandy loam soils were compacted. Seepage reduction of about 86% was obtained when the sides and bottoms were compacted; reductions of 12 – 31% were obtained when only sides were compacted.

Improving Pump Performance, Charles M. Burt, Frankline Gaudi, Daniel J. Howes

BioResource and Agricultural Engineering

Options can be specified to minimize power consumption by vertical pumps – both when new and over the life of the pump. Options discussed include bowl coatings, proper well development, improved suction screens, using closed impeller designs, increasing column size, using new bearings, providing proper bearing lubrication, impeller balancing, and polishing impellers. The proper TDH and flow rate must be specified, and the advantages of VFD controls are covered.

Agricultural Water Conservation And Efficiency In California - A Commentary, Charles M. Burt, Peter Canessa, Lawrence J. Schwankl, David F. Zoldoske

BioResource and Agricultural Engineering

This is a Commentary on some of the key points that are presented in “More with Less: Agricultural Water Conservation and Efficiency in California” by Cooley, ChristianSmith, and Gleick of the Pacific Institute, September 2008 (referred to as the “PacInst Paper” in the remainder of this discussion).

The authors of this Commentary have over 120 years combined of experience in agricultural and landscape irrigation. They have worked world-wide in design and installation of all types of irrigation systems (including automated drip systems from 1975 on), design and implementation of irrigation scheduling programs since 1977; design and implementation of water conservation …

Avoiding Common Problems With Drip Tape, Charles M. Burt

BioResource and Agricultural Engineering

This publication is meant to help farmers, dealers, and manufacturers recognize and understand some of the problems that have been experienced with drip tape – problems that are quite different from manufacturing defects. Problems that are quickly detected and properly identified can often be remedied, or be avoided in the future. The report addresses drip tape damage caused by pests, installation, emitter pressure, plugging, and other categories.

Technical Concepts Related To Conservation Of Irrigation And Rain Water In Agricultural Systems, A. J. Clemmens, R. G. Allen, Charles M. Burt

BioResource and Agricultural Engineering

Forty percent of freshwater withdrawals in the United States are for irrigated agriculture, which contribute more than $50 billion to the economy. Increasing diversions of water for urban, environmental, and other uses will likely decrease water available to agriculture. Water conservation in agriculture is touted as a good method for minimizing the impact of reduced agricultural diversions on production. Because “wasted” water is often reused until it reaches the ocean, there are limitations to the true water savings that result from programs that aim to increase irrigation efficiency. True water savings can come from four areas: reduction of unnecessary evaporation …

Conversion To Groundwater Pumping With Drip/Micro Irrigation Systems, Charles M. Burt, Monte Soto

BioResource and Agricultural Engineering

Twenty one irrigation districts in the Central Valley reported “conversion acres”. Conversion acres are those on which farmers used only groundwater for drip/micro irrigation although surface irrigation water was available.

The twenty one districts include about 2 million acres of irrigated area. Approximately 3.6% of that acreage (73,000 acres) has been “converted” to groundwater when farmers switched to drip/micro. Fourteen of these districts anticipate more conversion in the future. ITRC thinks that the conversion will be more rapid and greater than district personnel suspect.

The dominant factor that influences the conversion was the lack of flexible water delivery service to …

Irrigation District Energy Survey, Charles M. Burt, Daniel J. Howes

BioResource and Agricultural Engineering

This survey was completed by ITRC on behalf of the California Energy Commission Public Interest Energy Research (PIER) Program. The purpose of the survey was to establish a benchmark for the present status of the pumping systems used by agricultural water districts in California and to determine the districts' needs. The needs discussed involve technical assistance, research grant and low-interest loan funding, and district-related policy issues. Thirty agricultural water districts were selected for the survey. These districts were selected based on energy use per acre of irrigated area, size, geographic location, and distribution infrastructure.

Estimating The Savings From Improving Pumping Plant Performance., Derrel L. Martin

Department of Agricultural and Biological Systems Engineering: Presentations and White Papers

This brochure describes a method to estimate the cost of pumping water and to compare the amount of energy used to that for a well maintained and designed pumping plant. The results can help determine the feasibility of repairing the pumping plant.

Flap Gate, Charles M. Burt

BioResource and Agricultural Engineering

ITRC began to investigate early designs of Flap Gates in 1992. The gates originated in The Netherlands in the 1940s, but no design criteria were available. ITRC developed an Excel design program that uses a combination of theory and coefficients from field results – and has continued to improve the program almost every year. District staff at Turlock ID and Chowchilla WD provided valuable feedback with early models. This report includes information on design, installation, maintenance, water conservation and efficiency, cost, use, and benefits.

ITRC Flap Gates are typically used with a concrete counterweight in situations where the gates are …

General Irrigation Consumer Bill Of Rights, Charles M. Burt

BioResource and Agricultural Engineering

Cal Poly ITRC, together with various irrigation industry leaders and the Irrigation Dealers Association of California, plus with assistance from the California Energy Commission and Pacific Gas & Electric Co., developed the Irrigation Consumer Bill of Rights (ICBR) in 1994.

Volumetric Water Pricing, Charles M. Burt

BioResource and Agricultural Engineering

This document discusses the concept of volumetric pricing for irrigation water, including:

1. The justification for paying volumetrically

2. The challenge of charging volumetrically

3. Characteristics of volumetric charges and influencing factors

4. Examples of irrigation projects with volumetric charges

5. A summary of necessary conditions for volumetric billing

Monitoring And Evaluation (M&E) Of Capacity Development For Irrigation Modernization, Charles M. Burt

BioResource and Agricultural Engineering

Effective capacity development monitoring and evaluation (M&E) depends first upon targeted capacity development programs, with well-defined and attainable objectives that can be evaluated after completion of the program. This paper focuses on capacity development related to technical issues of irrigation modernization.

ITRC performs diagnostic research on irrigation projects and field irrigation systems in advance of developing targeted capacity development programs. If the capacity development is appropriate, and if it is targeted in both content and to specific audiences, one can expect an eventual improvement in post-capacity-building performance. ITRC has found that the improvements are incremental, and often require substantial changes …

Surface Drip Tape Irrigation Systems As An Alternative To Sdi For Field And Row Crops, Charles M. Burt

BioResource and Agricultural Engineering

In recent years, new equipment and techniques developed by farmers and private industry have improved the suitability of surface drip tape as an alternative to subsurface drip irrigation (SDI) for field crops and vegetable crops in highly mechanized farming. Retrievable drip tape systems now lack many of the disadvantages of SDI, yet provide the advantages typically expected from drip irrigation. Tape retrieval practices have now reached well beyond the theoretical realm to the point that they dominate drip systems for cauliflower, lettuce, celery, and broccoli on the Central Coast of California. It is expected that drip design and practices will …

Irrigation Network Regulation Through Cad System, Dr. Mumtaz Ahmed Sohag, Ali Asghar Mahessar

International Conference on Information and Communication Technologies

The irrigation system of Pakistan is the largest integrated network in the world. There are 3 major storage reservoirs, 19 barrages, 12 inter-river link canals, 45 independent irrigation canal commands and over 1,22,268 watercourses. The network of irrigation of the province of Sindh consists of 3 barrages and 14 canal commands. The irrigation water is being used for agricultural, industrial and domestic purposes. Owing to mismanagement and inequitable distribution of water, it is necessary to have a fool-proof system where water is supplied to the end-users judiciously. Therefore water managers and farmers cannot know, how much quantum of water has …

Systematic Framework For Evaluating Treated Wastewater Usage In Agricultural Irrigation, Yasser Kamal Nazzal

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

A general systematic framework with several sub-frameworks was developed to help managers make informed decisions related to the reuse of treated wastewater in agricultural irrigation. The framework involves the identification and evaluation of the short- and long-term effects of using treated wastewater with some common constituents of concern (e.g. salts and some specific ions, nutrients, heavy metals, organic compounds, and microorganisms) on the environmental elements (crop, soils, surface water, and groundwater), and on the public health. Local and/ or international standards, criteria, and guidelines related to agricultural reuse are applied to the evaluation of the effects. Based on the evaluation …