Other Biomedical Engineering and Bioengineering Commons^™

Bowl-O-Matic, Nathan Lin, Luis Torres, Jill Worthington, Aiden Foote

Mechanical Engineering

Adaptive physical education presents the unique challenge of accommodating individuals with diverse physical and cognitive abilities. Instructors and program designers must often integrate specialized equipment, fixtures, or features to ensure activities remain safe, inclusive, and user-friendly. Beyond accessibility, adaptive physical education highlights the importance of empowerment— enabling every participant to experience personal growth, confidence, and connection through movement. Friday Club, a local San Luis Obispo program supported by Cal Poly’s Kinesiology Department, embodies these values by providing adaptive physical activities that promote health and well-being for individuals with varying abilities. One of the most popular and regularly held activities is …

Electrically Evoked Emg Decomposition Using The Perturbative Generalized Series Expansion, William R. Walker

Master's Theses

Electrically evoked electromyography records the muscle's response to nerve stimulation and has been used for clinical assessment of neuromuscular function, as well as treatments such as functional electrical stimulation or stroke rehabilitation. In every muscular contraction, an electrical signal is generated. These signals come from the summation of simultaneously recruited motor units, enabling decomposition techniques to reveal information about motor unit recruitment.  By improving the ability to decompose and analyze these signals, clinical treatments involving neuromuscular electrical stimulation can be optimized and better understood. Much of the research on EMG analysis focuses on voluntary EMG, leaving a gap in the …

Cardiac Twitch Force Measurement System, Tara Hoffman, Sebastian Carrascal Gómez, Julian Macdonald

Biomedical Engineering

The goal of this project is to develop a low-cost and accurate force measurement system and method of measurement to be used in the testing of grown cardiac tissue samples. The primary stakeholder in this project is Dr. Luke Perreault, a biomedical engineering professor at California Polytechnic State University San Luis Obispo who is studying grown cardiac tissue rings, and any of his student lab personnel. Other stakeholders include other researchers in the tissue engineering field who require a similar form of testing to the methods developed in this project.

This document will introduce the identified problem and background as …

Cathy’S Catcher, Marlee Scott, Regen Worsley, Alessandra Valenzano, Aviv Ben Zeev

Mechanical Engineering

Deep-sea fishing presents significant challenges for individuals with upper-limb differences, particularly when using prosthetic devices that are not designed for recreational fishing activities. This project developed a custom prosthetic fishing rod attachment for a user who had lost her forearm and desired a safe, comfortable, and independent method of fishing. Through interviews with the sponsor and an iterative design process, a lightweight aluminum attachment was created to interface directly with the user's existing prosthetic quick-connect system.

The design process included concept generation, CAD modeling, rapid prototyping with 3D-printed models, manufacturing, and user-centered refinement. The final design consists of a welded …

Acoustic And Hemodynamic Analysis Of Phantoms: Roughness And Flow Dynamics, Ethan Erik Olof Sundberg

Master's Theses

The purpose of this study was to determine whether different vascular phantoms, with and without a surrogate arm, could serve as effective analogs to the human brachial artery for assessing endothelial dysfunction, an early indicator of cardiovascular disease, particularly atherosclerosis. Atherosclerosis is characterized by plaque buildup and endothelial damage, which precede more severe clinical events and are often detectable through changes in vascular function. A 40” water tower was used to simulate diastolic pressure, enabling water flow through each phantom. Strain gauge pressure transducers were placed at both ends of the phantoms to measure pressure drop, while a microphone captured …

Optimizing Microfluidic Murine Fibroblast And Human Epidermal Keratinocyte Cell Culture In 70Μm Microwells, Christian Navarro

Master's Theses

Cell culture is an essential technique utilized in biotechnology and medicine to remove systemic influences to study cellular behavior and morphological development of individual cell lines. However, conventional cell culture is two-dimensional and static meaning it can’t easily mimic in vivo conditions such as multicellular cell to cell interactions, fluid perfusion, or 3D structures which might alter cellular behavior and morphology. Microfluidic cell culture allows for the incorporation of in vivo conditions such as perfusion and chemical gradients allowing for more physiologically accurate models. The goal of this study is to develop a protocol for testing a microfluidic chip designed …

Investigating The Effects Of Hepatocyte Growth Factor On Primary Myoblast Proliferation, Grace Heller

Biomedical Engineering

Peripheral artery occlusive disease (PAOD) is a progressive vascular condition that affects over 200 million people worldwide and approximately 8 million in the United States. It is characterized by atherosclerotic narrowing of peripheral arteries, leading to reduced blood flow, ischemia, and, in severe cases, tissue loss and limb amputation. Although surgical revascularization is the gold standard, many patients—particularly those with comorbidities like diabetes— continue to experience poor outcomes, emphasizing the need for alternative therapies. One promising strategy is to enhance collateral arteriogenesis, the remodeling and enlargement of collateral arterioles that naturally bypass occluded vessels. Satellite cells (SCs), which give rise …

Treating Ground Water For Agricultural And Individual Consumption, Gabby Miller, Bronson Scott, Michael Clawson

Biomedical Engineering

This project, conducted in collaboration with Cal Poly seniors and Da Vinci High School students, aims to develop a solar-powered groundwater purification system. This system is designed to provide clean water for agricultural use and individual consumption, addressing the growing concerns of groundwater contamination and accessibility needs. The final prototype integrates a gravity filtration system combined with chemical purification, utilizing aluminum sulfate and chlorine to remove particulates, bacteria, and organic compounds.

The research phase involved an extensive review of groundwater contamination issues, existing filtration technologies, and market analysis. Key design constraints included cost-effectiveness, ease of maintenance, and minimal energy consumption, …

Design And Testing Of A Prototype Prosthesis For Pediatric Upper-Limb Transradial Amputees To Provide Adjustable Size And Modular Characteristics, Paul Heli

Master's Theses

This study was conducted to develop a financially accessible body-powered upper-limb prosthetic socket that can be adjusted to maintain fit and function for a growing child with a transradial amputation. The main objectives of the study were to design, manufacture, and test a device that was comfortable, functional, affordable, and adjustable. The socket was designed to be comfortable using global variables controlling the computer-aided design (CAD) model size with user-specific measurements. Comfort was also incorporated using shape-forming of the socket for specific residual limb features. The device was designed to perform the two main functions of suspension, or attachment to …

Hypoxic Incubator: Improving Robustness/Reliability And Demonstrating Physiological Efficacy, Damon Dennis Tan

Master's Theses

The Microphysiological Systems Laboratory aims to develop colorectal cancer tumor models under a hypoxic environment to assess model response to pharmaceutical compounds in vitro. To perform relevant studies, researchers have attempted to use different hypoxic inducing strategies such as a nitrogen pod and hypoxic incubator to recreate in vivo physiological responses to hypoxia. However, studies would be interrupted due to incubator functionality failure. To ensure successful and physiologically relevant studies, I improved and verified the robustness and reliability of a hypoxic incubator previously designed and manufactured in the lab. Through the testing and iterating design processes, I engineered and implemented …

Foot And Ankle Exoskeleton, Janet M. Velasquez Cabral, Kathryn C. Hamilton, Grant R. Lautze

Biomedical Engineering

This paper presents a non-motorized foot and ankle exoskeleton to assist persons who have no lower limb or abdominal function. Exoskeletons are defined as “an artificial external supporting structure” [1], they are wearable devices that can be used to assist the capabilities of the human body. Although the exoskeleton must be used with crutches, plantarflexion and dorsiflexion will be implemented within the ankle joint to alleviate strain on the foot and ankle, strategically designed in a way that supports the user so their walking performance is as ideal as possible. Additionally, safety straps will be integrated into the foot portion …

Coolsplint: Inflammation Reduction Accessory, Laura C. Denney, Winston H. Giang, Aanchal Singh

Biomedical Engineering

This document outlines a project sponsored by Elizabeth Mentel and Michael Clausson that addresses the shortcomings in current splinting options, particularly for wrist fractures in elderly patients. Stakeholders include clinicians, patients, and emergency medical technicians. Multiple improvements can be made to current splinting options to help alleviate inflammation along with splint versatility, affordability, accessibility, and ease of use. After determining the critical customer requirements, the primary objective of this project was to find a way to manage inflammation. The project explores existing splinting solutions and proposes a new design that utilizes cooling rods to reduce inflammation. The document reviews various …

Biobesoothe, Noah M. Taylor, Jillian Trilevsky, Sam Rosenkranz

Biomedical Engineering

This document details the background, design process, and functional prototype for the BioBesoothe senior project. The project aimed to address difficulties with self-regulation in children with autism. It focused on encouraging even, slow breathing to activate the parasympathetic nervous system, which in turn lowers heart rate, blood pressure, and stress levels. The project was guided by research into ways to achieve an appropriate breathing rate. In addition to functionality, emphasis was placed on engagement, ergonomics, and affordability. It was highly important for this product to be engaging to hold the interest of its patients and allow for extended periods of …

Using Noninvasive Calibrated Cuff Plethysmography To Observe The Effects Of Cold-Water Immersion On Arterial Compliance, Rita M. Grigorian

Biomedical Engineering: Graduate Reports and Projects

As the prevalence of cardiovascular diseases continues to exponentially grow in populations across the globe, the necessity of determining underlying factors, effective methods of diagnoses, and universally available preventive measures also grows. Early detection of endothelial dysfunction, a proven precursor of cardiovascular diseases, can be extremely impactful in encouraging preventative measures and early intervention before medical conditions become chronic. In recent years, ice plunging, a form of cryotherapy involving full body immersion in cold water, has gained popularity within circles of fitness and health practitioners, gaining the interest of people of all backgrounds. Certain parallels observed between the human physiological …

Using Noninvasive Calibrated Cuff Plethysmography To Observe The Effects Of Cold-Water Immersion On Arterial Compliance, Rita M. Grigorian

Master's Theses

As the prevalence of cardiovascular diseases continues to exponentially grow in populations across the globe, the necessity of determining underlying factors, effective methods of diagnoses, and universally available preventive measures also grows. Early detection of endothelial dysfunction, a proven precursor of cardiovascular diseases, can be extremely impactful in encouraging preventative measures and early intervention before medical conditions become chronic. In recent years, ice plunging, a form of cryotherapy involving full body immersion in cold water, has gained popularity within circles of fitness and health practitioners, gaining the interest of people of all backgrounds. Certain parallels observed between the human physiological …

Static Vascular Modeling Of Diabetes Progression, Andrea Skattenborg

Master's Theses

Cardiovascular disease is the leading cause of mortality in diabetic patients, and diabetes is one of the main causes of cardiovascular disease. Risk factors for cardiovascular disease result in structural and functional changes in the vascular wall. Arterial stiffness is a prominent structural change observed in the arterial wall that can be measured in clinical settings. The purpose of this thesis was to create a static model of the changes in arterial stiffness seen in diabetes. Elastic tubes with varying wall thicknesses were used to create artificial arteries for this purpose. Compliance (inverse of stiffness) of the arteries was determined …

Analytical Pipeline To Facilitate Electroencephalography Pain State Identification In Patients With Chronic Low Back Pain, Emma Katharina Jacobs

Master's Theses

Chronic low back pain (cLBP) affects the quality of life of over 23% of American adults and places an immense burden on the economy.^1–3 To more effectively diagnose and treat cLBP, quantitative biomarkers are needed to objectively measure pain and better identify the underlying mechanisms of cLBP. The overarching goal of this work is to create an analytical pipeline to investigate brain activity patterns measured with electroencephalogram (EEG) data of cLBP patients treated with transcutaneous spinal cord stimulation (tSCS). The specific aims of this project are to 1) investigate whether there is a difference between baseline EEG measurements and …

Functionality Of The Gracilis Collateral Is Impaired Following Arteriogenesis And Cell Transplantation, Ada A. Tadeo

Biomedical Engineering

Peripheral Arterial Disease involves narrowed arteries, reducing blood flow to limbs. Increasing blood flow to those extremities is possible by redirecting the blood to flow through natural bypasses (i.e. collateral arteries), which can enlarge via arteriogenesis to maintain blood supply once the prominent arteries have become occluded. This study aims to investigate how arteriogenesis affects collateral function, if myoblast transplantation can stimulate collateral growth, and how that in turn may affect collateral function. Femoral artery ligation was performed to mimic the blockage that occurs in patients with ischemic diseases on lean mice and mice with diet induced obesity (DIO). A …

Self-Balancing Bicycle Device, Charles Cole, Raffy Lorenzo, Neil Boyal

Biomedical Engineering

The sponsor, Justin Shaw, is currently developing a bicycle for an athlete who has lost movement in their legs. This athlete can no longer experience the unmatched feeling of naturally banking a bicycle at corners. The Self-Balancing Bike Device Team will create a device that can self-balance an electric recumbent bicycle at low speeds while being almost undetectable while turning. This document will outline the team’s background research into self-balancing vehicles, define the needs that must be solved, and delineate a schedule for future milestones.

Bone And Cartilage Compression Simulator, Karoline M. Wucherer, Benjamin A. Parmentier, Thomasina E. Hinkle

Biomedical Engineering

A device was developed that delivers mechanical loads to bone and soft tissue samples under physiological conditions to aid in the research of tissue engineering bone and cartilage. To begin the design process, a Network Diagram and Gantt Chart were produced to create a general timeline for the project to follow. This allowed us to measure our progress and determine what effects (if any) delays could have on our project.

Feverdots, Kameryn Laureano, Heidi Silk, Rita Grigorian

Biomedical Engineering

FeverDots are wearable temperature sensitive stickers that change color from black to pink at 99°F when placed on the temple or forehead. The objective of this project was to develop an efficient manufacturing method for FeverDots, and manufacture a device along with it. To create the FeverDots manufacturing device, the full design process was executed. The team went through a thorough ideation phase before ultimately defining and specifying the scope of the project.

The key customer requirements of this device include that it is lightweight, portable, durable, simple to assemble, easy to use, and able to generate uniform ink and …

Classifying Electrocardiogram With Machine Learning Techniques, Hillal Jarrar

Master's Theses

Classifying the electrocardiogram is of clinical importance because classification can be used to diagnose patients with cardiac arrhythmias. Many industries utilize machine learning techniques that consist of feature extraction methods followed by Naive- Bayesian classification in order to detect faults within machinery. Machine learning techniques that analyze vibrational machine data in a mechanical application may be used to analyze electrical data in a physiological application. Three of the most common feature extraction methods used to prepare machine vibration data for Naive-Bayesian classification are the Fourier transform, the Hilbert transform, and the Wavelet Packet transform. Each machine learning technique consists of …

Noninvasive Measurement Of Arterial Compliance With A Blood Pressure Cuff Using A Surrogate Arm Bench Top Model For Oscillometric Use, Shane Wilsey

Master's Theses

A surrogate arm model was created that is capable of being used for oscillometry. This model is capable of being used as a bench top model for blood pressure cuff devices. The arm consists of endplates and internal supports that are 3D printed with ABS, a silicone rubber outer sleeve, and interchangeable arteries made from two silicone rubber strips glued together at the edges. The interchangeable arteries have varying compliances that can be used as different inputs for oscillometric testing. A process was established to measure the artery compliances with a curve fit correlation of 0.95. However, testing revealed that …

Modeling Action Potential Propagation During Hypertrophic Cardiomyopathy Through A Three-Dimensional Computational Model, Julia Elizabeth Kelley

Master's Theses

Hypertrophic cardiomyopathy (HCM) is the most common monogenic disorder and the leading cause of sudden arrhythmic death in children and young adults. It is typically asymptomatic and first manifests itself during cardiac arrest, making it a challenge to diagnose in advance. Computational models can explore and reveal underlying molecular mechanisms in cardiac electrophysiology by allowing researchers to alter various parameters such as tissue size or ionic current amplitudes. The goal of this thesis is to develop a computational model in MATLAB and to determine if this model can accurately indicate cases of hypertrophic cardiomyopathy. This goal is achieved by combining …

Hand Strength And Dexterity Enhancer, Julia Ann Denison, Autumn B. Rexford, Melissa A. Kurani, Christina K. Fong

Biomedical Engineering

Good Grips created the hand strength and dexterity enhancer project to meet the challenge presented by Bill Phelps. He has Inclusion Body Myositis (IBM), an inflammatory muscle disease characterized by progressive muscle weakness and atrophy. Bill has limited strength in both hands and lost the ability to bend his fingers, making it difficult to grip anything. He needed a device that would help with everyday tasks such as writing, lifting, and holding various objects.

Our team consists of four engineering students attending Cal Poly, San Luis Obispo. We researched, designed, manufactured, and tested a device that would fulfill the problem …

The Impact Of Myoblast Transplantation On Collateral Capillary Arteriogenesis And Macrophage Phenotype, Christine Hue Do

Biomedical Engineering

Gangrene, pain, loss of limb function, amputation, and death are only few of the grievous consequences associated with peripheral arterial disease (PAD), a vascular disease caused by an obstruction that narrows the blood vessels. Since some patients have collateral vessels that can re-route blood to its downstream destination, much focus has been spotlighted upon discovering the mechanism of this process, termed arteriogenesis, as well as cell therapies to increase arterial diameter of collateral vessels. Since some patients do not have native pre-existing collateral vessels, another method to re-route blood is through arterialized collateral capillaries (ACC), which is the conversion of …

Gyroscopic Human Balance Device, Randy Lam Hau, Spencer Ross, Yael Farkash

Biomedical Engineering

This project’s sponsor, Charlie Guitierrez, has decades of experience building assistive walking devices for the wheelchair bound population. During his work, he noticed that many of his clients retained some ability to balance themselves and so theorized that they would be able to walk independently if given some form of assistance. This assistance could potentially be in the form of a wearable gyroscope. Gyroscopes are commonly used to stabilize objects subjected to instability, such as bicycles, motorcycles, and ships. Thus, a wearable gyroscope would assist its user in maintaining overall stability by imparting reactive torques and forces if the user …

A Novel Method To Commercialize Medical Devices Initially Developed At California Polytechnic State University San Luis Obispo, Christina Grigorian

Master's Theses

California Polytechnic State University, San Luis Obispo is a university that encourages students to approach learning hands-on. As such, there is cutting-edge technology being developed by students in all departments on campus. Being that the university possesses an outstanding biomedical engineering department, there are groundbreaking medical devices that students are creating at Cal Poly SLO. These are devices that can better the lives of individuals suffering from ailments or fulfill needs in the medical industry. Subsequently, it is vital that these devices make it out of campus laboratories and into the hands of consumers. In order to move a product …

Investigation Of Experimental Variation Of Bovine Sphingomyelin As A Novel Ingredient For Ultraviolet Protection, Esther Chen

Master's Theses

Skin cancer is a prevalent disease that globally affects 2-3 million people per year [1]. This number is expected to grow tenfold as depletion of the ozone layer contributes to harsher rays reaching Earth’s surface [2]. A common way to protect against those ultraviolet waves is to apply sunscreen, however, recent reports call into question the safety of some active ingredients as they can enter through the skin into the bloodstream [3]. This thesis aims to investigate an alternative solution that uses bovine sphingomyelin (BSM) as photoprotective solution against UV irradiation.

In order to evaluate the effectiveness of BSM against …

Reading Robot, Gillian Watts, Andrew Myers, Sabrinna Tan, Taylor Klein, Omeed Djassemi

General Engineering

Presently, there is an insufficient availability of human experts to assist students in reading competency and comprehension. Our team’s goal was to create an improved socially assistive robot for use by therapists, teachers, and parents to help children and adults develop reading skills while they do not have access to specialists. HAPI is a socially assistive robot that we created with the goal of helping students practice their reading comprehension skills. HAPI enables a student to improve their reading skills without an educator present, while enabling educators to review the student's performance remotely. Design constraints included: physical size, weight, duration …