Other Biomedical Engineering and Bioengineering Commons^™

Dynamic, Reconfigurable, And Hierarchical Biosynthetic Composites Via Collagen Self-Assembly Within Highly Crowded Microgel Pastes, Elif Narbay, Abbygail Caine, Sanika Pandit, Gabrielle Montgomery, Marion Harper, E. Daniel Cárdenas-Vásquez, Hatte Hamilton, Megan Hicks, Daniel Mattar, Kyle Choy, Marco Bisoffi, L. Andrew Lyon

Engineering Faculty Articles and Research

The fabrication of a new class of biomimetic biomaterials is reported using nanostructured microgel pastes formed from “overpacked” assemblies of ultrasoft poly(N-isopropyl acrylamide-co-acrylic acid) microgels and their composites with collagen. Despite the solid-like nature of microgel pastes, collagen fibrillogenesis is robust and rapid, with a 3D collagen network forming throughout the paste volume. Structural organization within the composite is interrogated via a suite of microscopy methods, while rheological characterization provides insight into the static and dynamic mechanical properties of the materials. Long-range fibrillogenesis is enabled by local crowding, dynamics, and spatial reconfigurability of pastes at the …

Characterization Of The Fatigue Threshold Behavior Of Uhmwpe, Bethany B. Smith, Anurag Roy, Robert O. Ritchie, Lisa A. Pruitt

Faculty Journal Articles

Ultra-high-molecular-weight-polyethylene (UHMWPE) has been the material of choice for bearings in total joint replacements (TJRs) for decades as a result of its excellent wear resistance, chemical inertness, energetic toughness, low friction, and biocompatibility. Utilization of this polymer in orthopedic devices requires oxidation, wear, and fatigue resistance. Balancing these important properties by tailoring processing techniques and modulating microstructural features has been an ongoing endeavor in the field. Research into the clinical applications of UHMWPE has primarily focused on the challenges of wear and oxidation while studies into the realm of fatigue have been more limited. Literature gaps exist in fully understanding …

Smart Dressings Accelerating Wound Healing With Tranexamic Acid-Infused Aligned Electrospun Nanofibers: In Vitro And In Vivo Assessments, Samar A. Salim, Abdullah Elbadry, Eman Gomaa, Mennatullah Faisal, Elbadawy A. Kamoun

Nanotechnology Research Centre

The development of advanced wound dressings capable of accelerating healing and achieving effective hemostasis remains a critical challenge in managing traumatic and surgical wounds. This study reports the fabrication and comprehensive evaluation of a novel multilayered, sandwich-structured nanofiber scaffold composed of Tranexamic acid (TXA), chitosan (CS), polyvinyl alcohol (PVA), L-arginine, and polylactic acid (PLA) for biodegradable wound dressing applications. Using sequential electrospinning, a four-layered scaffold was developed as a smart wound dressing, comprising an immediate-release TXA-CS-PVA layer for rapid clotting, a hydrophobic PLA barrier layer for protection, a sustained-release L-arginine-PVA layer to promote tissue regeneration, and a final PLA protective …

Crevice Corrosion Mechanisms Of Cocrmo Alloys In Orthopedic Implants: Retrieval Analysis, Nano-Tribocorrosion And Cellular Responses, Hwaran Lee

All Dissertations

Mechanically assisted corrosion and non-mechanically (chemically) driven corrosion in modular junctions of orthopedic implants using cobalt-chromium-molybdenum (CoCrMo) alloys remain clinical concerns and may contribute to implant failure. The underlying corrosion mechanisms are not yet fully understood, leaving a critical research gap. We hypothesized that corrosion in modular junctions may be driven by aggressive local environments, including fretting, metal ion release (cobalt ion, Co²⁺), low pH and reactive oxygen species (ROS). This dissertation aims to (1) analyze corrosion modes and potential causes in modular junctions; (2) identify chemically driven corrosion modes on CoCrMo alloys using simulated inflammatory modular taper …

Design And Evaluation Of Antibody-Conjugated Microneedle Patch For Early Mrsa Biomarker Detection, Kylee Marie Pop, Alexis Richie, Nicholas Jenkins, Andrew Holmes

Honors Theses

Post-operative orthopedic surgical site infections (SSIs), specifically those caused by methicillin resistant Staphylococcus aureus (MRSA), present a significant clinical challenge due to delayed detection, increased morbidity, and current rising healthcare costs. Early detection of infection remains limited due to the current methods of diagnosis, which consist of observation of the surgical site and laboratory infrastructure for conformation of infection. To combat these issues, my team and I have designed and evaluated a minimally invasive microneedle diagnostic patch that continuously monitors for the presence of MRSA-associated biomarker PBP2a in interstitial fluids around surgical site incisions. Upon antigen detection, a colorimetric response …

Optimizing Hydrogel Performance Composed Of Japanese Pagoda Tree Extract Loaded-Gelatin-Sodium Alginate-Polyethylene Oxide For Biomedical Applications: Influence Incorporated Calcium-Based Metal Organic Frameworks And Zinc Oxide Nps, Samar A. Salim

Nanotechnology Research Centre

Gelatin/sodium alginate/polyethylene oxide hydrogel was synthesized by self-gelation method and utilized to achieve enhanced mechanical strength. Japanese pagoda, tree extracts rich in flavonoids and isoflavonoids was incorporated to enhance tissue repair along with ZnO-NPs to provide the hydrogel with necessary antimicrobial and other desirable biological properties. The inclusion of Ca-BDC MOF enhanced hydrogel matrix by providing more surface area and the presence of calcium ion needed for tissue regeneration. Results revealed that composite hydrogel displayed suitable gelation time and swelling rate that was further improved by incorporating the plant extract, ZnO-NPs, and Ca-BDC MOF. The efficacy of the tested formulations …

Enhancing The Mechanical Properties Of Sla 3d-Printed Bio-Resin From Linseed Oil Using Cellulose And Lignin Biopolymers, Chukwunonso A. Ikedionu

College of Graduate Studies: Theses & Dissertations

Abstract

This research explores the development of bio resin from linseed oil by the process of epoxidation and acrylation to produce acrylated epoxidized linseed oil (AELO). Lignin and cellulose biopolymers were added as reinforcement at varying weight fractions of 1 wt.%, 2.5 wt.%, and 5 wt.%, and their mechanical performance was compared against pure AELO. The formulations were printed using an Elegoo SLA 3D printer to create standardized test specimens like tensile bars, compression cylinders, and hardness blocks, which were all prepared according to the ASTM testing standard.

The results indicate that reinforcement effects depend on both filler type and …

Magnetic Heating Efficiency Of Magnetite Nanoparticles: Dependence On Size And Alternating Magnetic Field, Sarah E. Kubican

Theses and Dissertations--Biomedical Engineering

Magnetic heating mediated by magnetic iron oxide nanoparticles (MION) has several clinical applications including cancer thermal therapy, tissue thawing for organ preservation, and magnetogenetics. However, current models of magnetic heating, including the widely used linear response theory, inadequately predict MION heating efficiency. An experimental study covering alternating magnetic field (AMF) strengths and frequencies ranging from 3.98 – 27.85 kA/m and 103.6 – 984.1 kHz, respectively, with a range of MION core diameters 9.5- 30.3 nm was conducted to elucidate the relationships between these AMF parameters and MION sizes and the resulting heating efficiencies. Heating efficiency was found to increase approximately …

Multimodal Imaging Of Protein-Based Biomaterials For Delivering Chemo-Agent Cargo For Glioblastoma Treatment In A Murine Model, Orin Mishkit

Dissertations and Theses

Protein-based self-assembling biomaterials, known as Thermo-Responsive Assembled Proteins (TRAP), present meaningful potential as drug delivery carriers. These materials enable the controlled, slow release of poorly soluble chemotherapeutic agents, such as doxorubicin (Dox), while potentially reducing systemic off-target effects. In collaboration with multiple NYU labs, this study evaluated the efficacy of two TRAP variants—TRAP and F-TRAP—as drug delivery carriers in a xenograft mouse model of glioblastoma multiforme (GBM).

The primary objective was to compare the effectiveness of TRAP-loaded Dox (TRAP-DOX) to free Dox in achieving tumor extravasation and accumulation, facilitating sustained drug release. We hypothesized that the leaky vasculature of GBM …

Investigating The Role Of Cd44 In Her2+ Breast Cancer Cells During Cancer Cell Redirection, Holly Caroline Jordan Campbell

All Dissertations

Despite a rise in survival rates of breast cancer patients due to advances in modern medicine, breast cancer is the most common type of cancer in women and is the second leading cause of cancer death in the United States. Early detection and a more personalized treatment of breast cancer has slowly improved patient outcomes. Nevertheless, there are impediments to better patient outcomes due to the complexity of the disease physiology. Therefore, there is a demand for a comprehensive understanding of cancer development as well as a need to understand tumor progression for enhanced therapies for patients.

Previous in vivo …

Shape Memory Alloy Capsule Micropump For Drug Delivery Applications, Youssef Mohamed Kotb

Theses and Dissertations

Implantable drug delivery devices have many benefits over traditional drug administration techniques and have attracted a lot of attention in recent years. By delivering the medication directly to the tissue, they enable the use of larger localized concentrations, enhancing the efficacy of the treatment. Passive-release drug delivery systems, one of the various ways to provide medication, are great inventions. However, they cannot dispense the medication on demand since they are nonprogrammable. Therefore, active actuators are more advantageous in delivery applications. Smart material actuators, however, have greatly increased in popularity for manufacturing wearable and implantable micropumps due to their high energy …

Degradable Staples And Delivery Device, Meha Elango, Jessica Cabrera, Makayla Scarpitti, Kareemat Melaiye

Williams Honors College, Honors Research Projects

The scope of this project is to design a method to secure skin grafts to healthy tissue. The ultimate goal for the proposed method is to be dissolvable in some form. Currently, skin grafts procedures utilize staples in most cases to hold a skin graft in place, but there are disadvantages that come with it. Staples are easy to place, but time consuming during the removal procedure. They also cause a lot of pain and discomfort for the patient. The goal of this project is to determine a way a secure skin grafts to healthy skin in order to reduce …

Muscle-Nerve Signaling And Its Role In Myogenesis, Synaptogenesis, And Regeneration, James T. Redden

Theses and Dissertations

Despite only comprising 0.1% of the myofiber surface area, a healthy motor endplate is densely packed with acetylcholine receptors (AChRs) responsible for mediating activity between the connected motor neuron and skeletal muscle via the neurotransmitter, acetylcholine. Loss of the endplate, known as fragmentation, is caused by car crashes, deep lacerations, and other traumatic injuries to the innervating nerve or direct injuries to the limb muscle(s) with intramuscular denervation as a common comorbidity. In both cases, endplate fragmentation begins within a week of injury proceeding muscle atrophy causing decreased mobility, paralysis, and quality of life. Endplate fragmentation of intact muscle fibers …

Histological Evidence For The Therapeutic Effect Of Chitosan Nanofibrous Dressing On Acute Skin Wounds In A Rat Model, Mahboubeh Ghanbari, Sayed Ahmadreza Razian, Sara Cartwright, Yury Salkovskiy, Jason Mactaggart, Mark A. Carlson

UNO Student Research and Creative Activity Fair

Introduction: Large-area skin traumas, such as thermal burns, are among the most severe health issues that decrease patients’ quality of life and burden healthcare systems. The CDC estimates that there are 1.1 million burns requiring medical attention each year, with more than 20,000 cases involving at least 25% of the body surface, resulting in 4,500 deaths. In addition, about 10,000 people die from burn-related infections. A promising solution to alleviate this problem is using wound dressings based on biopolymers with inherent wound healing properties and biodegradability. One of these biopolymers is chitosan, which is derived from arthropod shells and exhibits …

Nanomaterials For Cardiovascular Engineering, Roya Bagheri

Dissertations, Master's Theses and Master's Reports

Cardiovascular diseases and disorders (i.e., those related to heart and blood vessels) are the main reasons for mortality worldwide. Nanomaterials, with their unique morphologies and properties, have a great potential for advancing cardiovascular engineering to treat diseases and disorders. In this dissertation, several cardiovascular applications of conductive nanomaterials were investigated. First, a conductive nanomaterial was explored to fabricate biohybrid nanomaterial-cardiomyocyte (CM – heart muscle cell) systems. Using Carbon Nanotube (CNT) forest as a 3D porous and conductive scaffold was investigated. The influence of the CNT forest on the viability, attachment, and spreading of CMs and their genetic information was …

Material Characterization And Comparison Of Sol-Gel Deposited And Rf Magnetron Deposited Lead Zirconate Titanate Thin Films, Katherine Lynne Miles

Mechanical Engineering ETDs

Lead zirconate titanate (PZT) has been a material of interest for sensor, actuator, and transducer applications in microelectromechanical systems (MEMS). This is due to their favorable piezoelectric, pyroelectric and ferroelectric properties. While various methods are available to deposit PZT thin films, radio frequency (RF) magnetron sputtering was selected to provide high quality PZT films with the added capability of batch processing. These sputter deposited PZT films were characterized to determine their internal film stress, Young’s modulus, composition, and structure. After characterization, the sputtered PZT samples were poled using corona poling and direct poling methods. As a means of comparison, commercially …

Developing New Crutch Tip Design For Overall Increased Stability And Improved Movement On Different Terrains, Lauren Skinner

Honors Theses

Crutches are a mobility assistive device that are often used in various situations, such as post- surgical rehabilitation and recovery after injury. The current crutch tip design that is used on today’s crutches are often unstable and do not provide quality movement on different terrains, such as snow, ice, mud, and wet surfaces. These problems would be solved with a new tip design that could be attached to existing crutches or manufactured with the crutch itself. The team’s solution to this problem is a crutch tip with modular parts. The tip would attach to the shaft of the crutch like …

Surface Laser Texturing Of Cocrmo Alloys, Gabriel Dharwadker

Biomedical Engineering Undergraduate Honors Theses

Artificial orthopedic implants such as hip joints suffer from excessive wear due to excess friction between the polyethylene and cobalt-chromium-molybdenum surfaces of the device. This increase in friction causes a fraction of them to give out within ten years. Therefore, to minimize the probability of this happening, recent research has been conducted regarding laser surface texturing of the cobalt-chromium-molybdenum alloy components of artificial joints. These surface textures serve to mimic the native lubrication mechanisms of cartilage in natural joints, which, in a natural joint, lowers the friction. However, the production of these laser surface textures is still a field of …

Breaks In Longitudinal Elastic Fibers Of Human Femoropopliteal Arteries, Elham Zamani

UNO Student Research and Creative Activity Fair

Breaks in Longitudinal Elastic Fibers of Human Femoropopliteal Arteries

Elham Zamani1, Majid Jadidi1

1 Department of Biomechanics, University of Nebraska Omaha, Omaha, NE

Introduction: Elastin is a major protein in the body with half-life >50 years. It is thought that elastic fibers are formed before the postnatal period. In the femoropopliteal artery (FPA), the main artery in the leg, longitudinal elastic fibers are present in External Elastic Lamina (EEL). Our team has studied more than 1000 cadaveric human FPA and has noticed that there are big breaks in their longitudinal elastic fibers in some subjects. Our goal in this work …

Impact Of Percutaneous Transluminal Intervention On Vascular Hypoxia And The Role Of Micro-Calcifications On Atherosclerotic Plaque Rupture, Andrea Corti

Dissertations and Theses

Atherosclerotic disease is initiated by cholesterol build-up beneath the endothelium, which evolves into a fibroatheroma, a lipid-rich plaque covered by a fibrous cap. Many of these plaques are considered as vulnerable, as they grow to occlude the luminal section of the artery (chronically stenotic) or become mechanically unstable with a higher chance of rupturing (rupture-prone). On one hand, chronically stenotic vulnerable plaques are symptomatic lesions that are often treated with Percutaneous Transluminal Intervention (PTI). Unfortunately, approximately 10% of PTI procedures are followed by severe Neointima Hyperplasia (NH), which causes a new occlusion and failure of the implant. A significant precursor …

The Impact Of Myoblast Transplantation On Collateral Capillary Arteriogenesis And Macrophage Phenotype, Christine Hue Do

Biomedical Engineering

Gangrene, pain, loss of limb function, amputation, and death are only few of the grievous consequences associated with peripheral arterial disease (PAD), a vascular disease caused by an obstruction that narrows the blood vessels. Since some patients have collateral vessels that can re-route blood to its downstream destination, much focus has been spotlighted upon discovering the mechanism of this process, termed arteriogenesis, as well as cell therapies to increase arterial diameter of collateral vessels. Since some patients do not have native pre-existing collateral vessels, another method to re-route blood is through arterialized collateral capillaries (ACC), which is the conversion of …

Machine Learning Applied To Colloidal Properties Of Perfluorocarbon Nanoemulsions For Imaging In Ards/Ali, Marco Hosfeld

Electronic Theses and Dissertations

Acute Respiratory distress Syndrome (ARDS) and Acute Lung Injury (ALI) are inflammatory lung pathologies consisting of non-hydrostatic pulmonary edema leading to hypoxia and impaired gas exchange in the lungs. ARDS/ALI is both difficult to study and treat as it is not in itself a specific pathology but rather a syndrome consisting of many pathologies that vary case by case. It is, however, consistently characterized by an explosive acute inflammatory response in the lung parenchyma leading to hypoxia. Although time has seen to an increase in the understanding of ARDS/ALI, the mortality rate remains in the range of 30-50%. For these …

Development Of The Cell-Free Protein Biomanufacturing Platform For The Therapeutic Human Protein Production And The Topical Delivery Applications Using The Nanosized Hydrogel System, Jeehye Kim

LSU Doctoral Dissertations

Proteins are highly structural polymers, performing an enormous range of roles within organisms. Unlike synthetic polymers, proteins have a significant hierarchical ordering that can be disrupted by many environmental factors, which limits the scale-up manufacturing capability as well as the utilization of proteins as therapeutic agents. In this study, the Cell-Free Protein Synthesis (CFPS) system was developed to enhance the production capacity and applications of the therapeutic proteins. The CFPS is an advanced biosynthetic and genetic-engineered system. It enables the efficient production of proteins when the conventional cell-based protein synthesis systems cannot be applied, and when sophisticated control is required …

Development Of Light Actuated Chemical Delivery Platform On A 2-D Array Of Micropore Structure, Hojjat Rostami Azmand, Hojjat Rostami Azmand

Dissertations and Theses

Localized chemical delivery plays an essential role in the fundamental information transfers within biological systems. Thus, the ability to mimic the natural chemical signal modulation would provide significant contributions to understand the functional signaling pathway of biological cells and develop new prosthetic devices for neurological disorders. In this paper, we demonstrate a light-controlled hydrogel platform that can be used for localized chemical delivery in a high spatial resolution. By utilizing the photothermal behavior of graphene-hydrogel composites confined within micron-sized fluidic channels, patterned light illumination creates the parallel and independent actuation of chemical release in a group of fluidic ports. The …

Solostand, Hau Nhat Doan, Sydney Gray, Celina Dioso

Biomedical Engineering

The purpose of this scope of work is to highlight the progress and development of SoloStand sponsored by Derek Herrera, chief technical officer and founder of SpinalSingularity. SoloStand is an attachment to a wheelchair that will benefit paraplegics that use wheelchairs. A portable and customizable attachment to a wheelchair will allow the user to do everyday tasks without transferring into a separate standing wheelchair and travel more easily. This document outlines everything that has been done in fulfillment of our senior project requirements.

Assessment Of The Biocompatibilty, Stability, And Suitability Of Natural And Synthetic Polymers And Drugs In The Fda Approval Process, Phuong Anh Hoang Nguyen

Biomedical Engineering ETDs

Regulation of the development, production, marketing, and sales of medical pharmaceuticals and devices in the United States fall under the regulatory functions of the Food and Drug Administration (FDA). The current FDA approval process takes an average of 10 years from start to completion, and costs over $100 million. As a result, companies use many different methods to find additional use of their drugs through marketing directly to the physician, or recycling of previously approved drug moieties. In this work, an evaluation of the in vitro and ex vivo biocompatibility of polymers and drugs in different phases of FDA approval …

Development Of A Sonically Powered Biodegradable Nanogenerator For Bone Regeneration, Avi S. Patel

University Scholar Projects

Background: Reconstruction of bone fractures and defects remains a big challenge in orthopedic surgery. While regenerative engineering has advanced the field greatly using a combination of biomaterial scaffolds and stem cells, one matter of difficulty is inducing osteogenesis in these cells. Recent works have shown electricity’s ability to promote osteogenesis in stem cell lines when seeded in bone scaffolds; however, typical electrical stimulators are either (a) externally housed and require overcomplex percutaneous wires be connected to the implanted scaffold or (b) implanted non-degradable devices which contain toxic batteries and require invasive removal surgeries.

Objective: Here, we establish a biodegradable, piezoelectric …

Development Of A Sonically Powered Biodegradable Nanogenerator For Bone Regeneration, Avi Patel

Honors Scholar Theses

Background: Reconstruction of bone fractures and defects remains a big challenge in orthopedic surgery. While regenerative engineering has advanced the field greatly using a combination of biomaterial scaffolds and stem cells, one matter of difficulty is inducing osteogenesis in these cells. Recent works have shown electricity’s ability to promote osteogenesis in stem cell lines when seeded in bone scaffolds; however, typical electrical stimulators are either (a) externally housed and require overcomplex percutaneous wires be connected to the implanted scaffold or (b) implanted non-degradable devices which contain toxic batteries and require invasive removal surgeries.

Objective: Here, we establish a biodegradable, piezoelectric …

Deswelling Induced Morphological Changes In Dual Ph And Temperature Responsive Ultra-Low Crosslinked Poly (N-Isopropyl Acrylamide)-Co-Acrylic Acid Microgels, Molla R. Islam, Maddie Tumbarello, L. Andrew Lyon

Engineering Faculty Articles and Research

Poly(N-isopropylacrylamide) microgels prepared without exogenous cross-linker are extremely “soft” as a result of their very low cross-linking density, with network connectivity arising only from the self-crosslinking of pNIPAm chains. As a result of this extreme softness, our group and others have taken interest in using these materials in a variety of bioengineering applications, while also pursuing studies of their fundamental properties. Here, we report deswelling triggered structural changes in poly(N-isopropylacrylamide-co-acrylic acid) (ULC10AAc) microgels prepared by precipitation polymerization. Dynamic light scattering suggests that the deswelling of these particles not only depends on the collapse of …

Improving The Palatability Of Colonoscopy Preparations, Phuong Anh Hoang Nguyen, Darnell Leon Cuylear, Heather Elizabeth Canavan

Shared Knowledge Conference

Colorectal cancer (CRC) is the second leading cause of cancer-related deaths in the United States. The most reliable screening method of CRC is a colonoscopy which requires a 4-Liter polymer with electrolytes preparation. Two in five patients are non-compliant to their colonoscopy schedules, with many patients who abstain reporting refusal due to significant discomfort associated with this preparation. Furthermore, there are distinct gender differences in the tolerance of colonoscopy preparations in male and female populations. We hypothesize the differences in clinic are a result of toxic effects of the drug associated with poor mixing by individual patients. PEG, the drug, …