Biomedical Devices and Instrumentation Commons^™

A Proof Of Concept For Detection Of Palato-Lingual Contact Without Intraoral Electrodes In A Human Participant, Amitava Biswas

Master's Theses

The author of this thesis conceived and investigated an unexpected electrical signal that may not be noticed during regular electroglottography (EGG) when electrodes are conventionally placed on the anterior surface of the throat. It appears that there is a measurable electrical signal from the EGG equipment when electrodes are placed over the frontal cheek (belly of zygomatic muscle), and the tongue is elevated to contact the hard palate, or the tongue is lowered to break the contact. Therefore, this phenomenon is designated as unconventional electroglottography (UEGG, Dr. Steven Cloud, private communication, July 17, 2022).

Two distinctive patterns of waveforms were …

Creating Reel Designs: Reflecting On Arthrogryposis Multiplex Congenita In The Community, Iris Layadi

Purdue Journal of Service-Learning and International Engagement

Because of its extreme rarity, the genetic disease arthrogryposis multiplex congenita (AMC) and the needs of individuals with the diagnosis are often overlooked. AMC refers to the development of nonprogressive contractures in disparate areas of the body and is characterized by decreased flexibility in joints, muscle atrophy, and developmental delays. Colton Darst, a seven-year-old boy from Indianapolis, Indiana, was born with the disorder, and since then, he has undergone numerous surgical interventions and continues to receive orthopedic therapy to reduce his physical limitations. His parents, Michael and Amber Darst, have hopes for him to regain his limbic motion and are …

Build Your Own Body Mod: Empowerment Through Prototyping And Design, Anaiss Arreola, Katherine R. Ganim

Journal of Science Education for Students with Disabilities

When you don’t have a hand, what could you have instead? This article introduces the impact of inviting youth with disabilities to learn tools and technology to design their own solutions and advocate for their own future. This approach to programming is rooted in a mindset of designing WITH, not FOR. Not only are design outcomes improved when users are incorporated into the process, but this approach has been shown to improve confidence in creating one’s own solutions. These programs include hands-on “design-your-own-body-mod” workshops, as well as a budding inclusive design consultancy led by youth with disabilities. Through this programming, …

In The Pursuit Of Assistance: A Team's Desire To Not Let A Congenital Amputation Get In A Young Boy's Way, Carl Russell Iii, Gavin Loucks, Kirsten Wozniak

Purdue Journal of Service-Learning and International Engagement

EPICS is a service-learning design program run through Purdue University. It strives to teach students design skills through providing for individuals, communities, and organizations in the surrounding area while mirroring engineering industry standards. BME (Biomedical Engineering) is a team within EPICS that strives to serve community partners through biomedical applications. William Sevick is an elementary school student with a congenital arm amputation. William and his family have been working with the BME team for the past three years designing assistive devices with the purpose of improving his actions in daily life such as eating, playing games, and riding his bike.

Prosthetic Hand, Nicholas Damiani, Eric Rassavong, John Zolton

Williams Honors College, Honors Research Projects

Development of a prosthetic hand for an above-the-wrist amputee. The hand will provide flexion and extension of the wrist, fingers and thumb. The device will be customized for each individual by utilizing an medical imaging of the amputation side stump and the normal arm/wrist as the input. An integral hand/wrist and socket will be 3D printed, and actuators will be mounted to the prosthetic to provide motion. The wrist will be a mirror-image of the normal hand. Materials utilized will be selected based on the medical image intensity for different tissue types (cartilage, bone, skin, fat, etc.) and will simulate …

All-Wheel-Ukraine, Sofiya Rakovska, Hannah Mcculloch, Andrey Garasimchuk, Ahmad Alsaihati

Williams Honors College, Honors Research Projects

We are working with a non-profit organization in Ukraine that provides wheelchairs/strollers to families of disables children who cannot afford them. Their current preferred solution is a baby stroller. The organization asked us to create a wheelchair that is cost efficient, light and collapsible to be used for children ages up to thirteen years old. We will be creating an alpha prototype wheelchair by modifying a basic wheelchair that we purchased. This modifications include adding a headrest that is adjustable and provides a sufficient support for children within the age group given to us and diverse levels of disabilities. We …

On-Demand Label Production, Robert A. Zimmerman

Master's Theses

The production and approval process for the various labels used in clinical trials wastes significant time and resources through the need to outsource label production or rely on large reams of pre-cut label stock for each revision throughout the process. An in-house, on-demand label printing and cutting system is a potential remedy to this waste. Previous work by Cheadle et al. resulted in a functional electomechanical prototype of the label cutting aspect of this research, capable of rudimentary linear cuts. In this continued research, emphasis was placed on improved label cutting capabilities and creating PC control software for label design. …

Easy Adjustable Protective Helmet, Ryan Balash

Williams Honors College, Honors Research Projects

Akron Children’s Hospital and The University of Akron’s Biomedical Engineering Design Team Engineering Forward have paired together to improve medical adapted helmets for post-operative and disabled patients. An issue is the helmets are only produced in a couple of sizes. Also, it is a tedious process to constantly adjust the pressure on the patient’s cranium within a trial-and-error process. Engineering Forward plans to improve the effectiveness of this helmet by creating an adjustable helmet that can read the pressure on a patient’s head. The caregiver can then make the necessary adjustments to the helmet to accommodate the patient. Documents of …

Engineering Success On The Field: A Reflection On The Epics Ironman Pediatric Prosthetic Project, Glynn Gallaway

Purdue Journal of Service-Learning and International Engagement

Glynn Gallaway is a student in the Purdue Mechanical Engineering Class of 2020 with interests in the health care, assistive technology, and medical device industries. Glynn is from Dallas, Texas, and was inspired to pursue this career path through her interactions with youth with special needs. She joined the EPICS Ironman team in the fall of 2016 during her first year at Purdue as a part of the learning community. In this article, she discusses her experiences on the Ironman team creating a pediatric prosthetic for a young local athlete. The goal of the Ironman team is to create a …

Foley Catheter Priming Device, Melissa A. Boswell, Landon Davis, Renee Horn, Tyler Grubb, Jason Green

Williams Honors College, Honors Research Projects

A lack of a pressure gradient throughout the catheter prevents urine flow from the bladder and through catheter system in a condition referred to as “air-lock.” The purpose of this project was to design a device that could be utilized by person with a catheter faced with the problem of air-lock to restore urine flow and normal functioning of the catheter system. After a prototype was created, the device was put through a series of tests to insure proper functioning, absence of leakage, and durability. The device created can be added in-line with the catheter system, inconspicuously under the user’s …

Implementation Of Physiologic Pressure Conditions In A Blood Vessel Mimic Bioreactor System, Kevin Mark Okarski

Master's Theses

ABSTRACT

Implementation of Physiologic Pressure Conditions in a Blood Vessel Mimic Bioreactor System

Kevin Mark Okarski

Tissue engineering has traditionally been pursued as a therapeutic science intended for restoring or replacing diseased or damaged biologic tissues or organs. Cal Poly’s Blood Vessel Mimic Laboratory is developing a novel application of tissue engineering as a tool for the preclinical evaluation of intravascular devices. The blood vessel mimic (BVM) system has been previously used to assess the tissue response to deployed stents, but under non-physiologic conditions. Since then, efforts have been made to improve the vessel and bioreactor’s ability to emulate in …