Biomedical Devices and Instrumentation Commons^™

Cerebral Blood Flow Measured By Diffuse Correlation Spectroscopy For Monitoring Depth Of Anesthesia In Piglets, Mert Deniz Polat, Kurtulus Izzetoglu, Randolph Sinahon, Meltem Izzetoglu, Shadi Malaeb

St. Chris Research Day

No abstract provided.

Piezoelectric And Conductive Polymer Based Flexible Devices Enabling Cardiovascular Health Sensing And Energy Harvesting, Andrew Closson

Dartmouth College Ph.D Dissertations

Piezoelectric materials show great promise for low-power wearable and implantable sensing, but their rigidity makes it challenging to integrate them with biological tissue. To address this, researchers have started exploring polymer-based functional materials that offer flexibility and are suitable for interfacing with the human body. However, these materials are still in their early stages, and a framework is necessary to illustrate how these materials, in conjunction with novel fabrication techniques and device designs, can enable the development of multi-functional sensing and energy harvesting devices.

This thesis utilizes highly scalable fabrication methods for functional polymers to build and test a flexible …

Validity Of Fitbit And Garmin Devices While Ascending And Descending Flights Of Stairs, Alan Garcia

UNLV Theses, Dissertations, Professional Papers, and Capstones

Two popular wearable fitness device brands are Fitbit and Garmin. The validity of Fitbit and Garmin’s wrist-worn devices in measuring step counts in various settings, such as walking up and down a staircase, is unclear. PURPOSE: To determine if four devices, the Fitbit Charge 2, Fitbit Versa 2, Garmin Fēnix 5 and Garmin Vívosmart HR+ record valid measures of step count when ascending and descending flights of stairs at three different speeds. METHODS: Twenty-eight participants (n=28) were tested individually. Two devices were randomly selected to be placed on each wrist. Participants climbed up and then down one, two, and three …

A General-Purpose Software Platform For Closed-Loop Neuromodulation, William Engelhardt

McKelvey School of Engineering Graduate Student Theses & Dissertations

Implementing closed-loop neuromodulation therapies is a challenging and expensive endeavor. It requires developing software capable of acquiring signals from a bio-signal amplifier, analysis of these signals, and initiation of precisely timed stimulation, all of which need to be accomplished in real-time with very low latency. Developing this software is difficult, as it requires a wide range of expertise ranging from interfacing with hardware to real-time signal processing. Even when successfully implementing such a system for one set of hardware, it often then only works within the laboratory that conceived it. This is because of the inherent heterogeneity in the devices …

The Antler: The Design And Development Of An Independent Shower Support Stand For Those Living With Lower Extremity Limb Loss, Kylie Wright

Honors Theses

While we do not often think about it, taking a shower is a privilege. Standing in the hot water, cleaning off after a long day outdoors, and taking a moment to simply relax is an experience that most people in the U.S. have participated in. However, about 1.4 million Americans do not have this luxury3. Lower extremity amputees have long been advised to shower while seated for their safety. This population is unable to experience the simple independence that accompanies standing in the shower. Despite the growing rate of amputations each year, no products are currently available on the market …

To Hear Or Not To Hear: How “Best Interest” Determinations Can Help In The Cochlear Implant Debate, Tessa Wright

Minnesota Journal of Law, Science & Technology

No abstract provided.

Redesigning Nasogastric Feeding Tubes To Prevent Dislodgement, Sydney Ruth Rester, Shelby Lynn Berry

Honors Theses

Seniors at the University of Mississippi studying biomedical engineering complete a senior project that seeks to solve a problem in healthcare. Our team, composed of Sydney Rester, Shelby Berry, Andrew Ulmer, and Alex Bromley, sought to improve care associated with nasogastric feeding tubes. We identified two major problems: clogging and tube dislodgement. To address the problem of dislodgement, the team crafted a new feeding tube design with a balloon attachment. The attachment prevents a patient from pulling the feeding tube out and keeps the tube from dislodging due to normal patient movement. We further determined that our tube should be …

Redesigning Nasogastric Feeding Tubes To Prevent Dislodgement, Shelby Lynn Berry, Sydney Ruth Rester

Honors Theses

Seniors at the University of Mississippi studying biomedical engineering complete a senior project that seeks to solve a problem in healthcare. Our team, composed of Sydney Rester, Shelby Berry, Andrew Ulmer, and Alex Bromley, sought to improve care associated with nasogastric feeding tubes. We identified two major problems: clogging and tube dislodgement. To address the problem of dislodgement, the team crafted a new feeding tube design with a balloon attachment. The attachment prevents a patient from pulling the feeding tube out and keeps the tube from dislodging due to normal patient movement. We further determined that our tube should be …

A Proof Of Concept For Detection Of Palato-Lingual Contact Without Intraoral Electrodes In A Human Participant, Amitava Biswas

Master's Theses

The author of this thesis conceived and investigated an unexpected electrical signal that may not be noticed during regular electroglottography (EGG) when electrodes are conventionally placed on the anterior surface of the throat. It appears that there is a measurable electrical signal from the EGG equipment when electrodes are placed over the frontal cheek (belly of zygomatic muscle), and the tongue is elevated to contact the hard palate, or the tongue is lowered to break the contact. Therefore, this phenomenon is designated as unconventional electroglottography (UEGG, Dr. Steven Cloud, private communication, July 17, 2022).

Two distinctive patterns of waveforms were …

A Wheelchair-Bed Transfer Device For Patients With Limited Mobility, Malachie Nichols

Biomedical Engineering Undergraduate Honors Theses

As the population ages, eldercare becomes more important than ever, yet many caregivers lack the resources they need to safely do their jobs. For those who take care of a disabled loved-one at home or work as home health aides, basic tasks can be frustrating and even dangerous. The high physical demands of moving and lifting patients make injuries common among home health care workers. Musculoskeletal injuries to the back, shoulders, wrists, and hands are especially common. The use of transfer devices such as Hoyer lifts, slide boards, and gait belts help to make moving patients easier and safer, but …

Characterizing And Quantifying Shear-Induced Hemolysis In A Hollow Fiber Membrane System, Siddhi Bhat

Chemical Engineering Undergraduate Honors Theses

Clinical studies have shown that patients undergoing renal replacement therapy are more susceptible to developing hemolysis, or the rupturing of red blood cells. Rapid hemolysis can cause symptoms such as anorexia, vomiting, and even death in severe cases. The aim of this study is to identify how shear stress within a hollow fiber membrane impacts the level of hemolysis that occurs. This allows for the optimization of the ultrafiltration membranes that are typically used for hemofiltration treatments. The variables being studied are the radii of hollow fibers, number of fibers, and volumetric flow rate of blood being circulated. Here, we …

Mitral Valve Imaging And Biomechanics: A Workflow Towards Computational Modeling And Validation, Sam Stephens

Graduate Theses and Dissertations

The mitral valve serves a critical role in healthy cardiac function by ensuring the unidirectional flow of oxygenated blood from the left atrium into the left ventricle. It experiences the highest pressures found within the heart and its closure is the result of a complex interaction of several different structures that, furthermore, are unique to each individual. Despite the valve’s vital role however, the specific function of these constituent structures is not fully understood. This, confounded by its asymmetric, personalized nature, make surgical interventions for the mitral valve far less effective than for its neighboring aortic valve. Efforts to overcome …

The Study Of Corrosion On Additive-Manufactured Metals., Braydan Daniels

Electronic Theses and Dissertations

The purpose of this study was to investigate and compare the corrosion mechanisms between wrought and additive-manufactured (3D-printed) copper and stainless steel. The experimental procedure consisted of measuring the open circuit potential, electrochemical impedance spectroscopy, linear sweep voltammetry, Tafel analysis, surface topology, and scanning electron microscopy for each metal within salt water, tap water, sulfuric acid, and synthetic body fluid (excluding copper in synthetic body fluid).

Overall, printed stainless steel was more corrosion-resistant than wrought stainless steel in tap water and synthetic body fluid based on OCP, LSV, and surface topology results. Additionally, printed copper was more corrosion-resistant than wrought …

Wireless, Handheld Diffuse Reflectance Spectroscopy To Quantify Tissue Microvascular Hemodynamics, Linh Luong, Alex Moazzen, Mark Romine, Katie Cho, Paul Lee

Symposium of Student Scholars

Diffuse Reflectance Spectroscopy (DRS) is a non-invasive optical method to characterize tissue optical properties for disease diagnosis and health monitoring. Two optical fibers are often used in a DRS system: one to deliver light to the tissue and the other to gather diffuse reflectance spectra, which provide quantitative details about the structure and composition of the tissue. The conventional DRS system, however, is expensive, bulky, and composed of fragile optical fibers and multiple electrical connections. Here we propose to build a wireless, handheld, and fiber-less diffuse optical spectroscopy system. Unfortunately, the diffusion approximation utilized for data analysis of the conventional …

3d Reconstruction Of Syndactylized Hand In Autodesk Recap Photo With Arduino, Caleb E. Scheideger

ONU Student Research Colloquium

Syndactyly is one of the most common congenital malformations of the hand and is a result of a failed separation of adjacent digits. These digits are common among congenital limb malformations that affect 1 out of 2,000-3,000 people at birth. A reconstructive surgery would be needed to separate the digital skin, reconstruct the web space between fingers, and cover the separated digits with soft tissues. Finding the optimal shape and size for a dorsal flap in the web commissure reconstruction is important to avoid web creep. Conducting a numerical study with known mechanical properties, such as Young’s Modulus of the …

Image Analysis Methodology For Evaluating Coating Uniformity Of Drug-Coated Angioplasty Balloons, Allison Dobson Zieschang

LSU Master's Theses

Percutaneous transluminal balloon angioplasty (PTA) is a surgical procedure to treat peripheral artery disease, but restenosis causes suboptimal outcomes in many patients. Drug-coated angioplasty balloons (DCBs) were developed to reduce the risk of restenosis by delivering anti-proliferative drugs to the lesion. The efficacy of DCBs depends on factors like drug loading and drug release rate, both of which are directly impacted by the coating uniformity. This thesis evaluates the uniformity of DBCs using fluorescence microscopy, scanning electron microscopy (SEM), qualitative analysis, and an image processing algorithm. Uniformity was quantified by three measurements: histogram standard deviation, histogram percentage of coverage, and …

A Device For Measuring Acoustic Output Intensity Of Transcranial Doppler Ultrasound Transducers For Comparison With Fda Regulations, Sarah Altman, Gregory Bashford, Benjamin Hage

Honors Program: Senior Projects (Public)

Transcranial Doppler Ultrasonography (TCD) is a non-invasive methodology which can evaluate cerebral blood flow velocity in real time. Single-element focused circular transducers placed on the scalp produce ultrasound waves capable of penetrating the skull with minimal aberration, enabling measurement of the Doppler shift. As such, TCD can measure blood flow velocity in the internal carotid and vertebral arteries, as well as the arteries of the Circle of Willis: the Anterior Cerebral (ACA), Posterior Cerebral (PCA), and Middle Cerebral Arteries (MCA). Intracranial aneurysm and ischemic stroke are serious conditions in which ballooning or occlusion of cerebral vessels cause insufficient perfusion, leading …

Evaluation Of A Portable Gynecological Examination Table On Increasing Access To Cervical Cancer Screenings, Brennan Burrows, Giuliana Motta, Vibhasri Davuluri, Urvee Deo, Aman Tahir, Brindha Rajakumar, Jacob Blumenstein, Eliza Steinberg, Mariam Tobia, Asmita Tuladhar, Abigail Ahn

Medical Student Research Symposium

Introduction: Cervical cancer is a preventable disease affecting millions of women worldwide, with higher prevalence and mortality in developing countries. One explanation of this disparity is due to reduced access to screenings, especially in rural communities where mobile health clinics are limited by what medical equipment they can bring. To address these barriers, an engineering team called Project MESA (Making Examinations Safe and Accessible) designed a gynecological examination table that is portable, lightweight, and easily sanitizable.

Objective: This study aims to (1) evaluate whether the implementation of this device improves the clinician’s ability to perform pap smears as opposed to …

Postpartum Hemorrhage Detection Device, Kaitlyn Bailey, Adrian Diaz, Alcides Caballero

Biomedical Engineering

During a cesarean section, blood loss greater than 1000 mL is classified as a hemorrhage. Quantified blood loss methods are used to detect hemorrhage, however existing methods are inaccurate and time consuming. Our proposed device is inserted vaginally during a cesarean section to collect and quantify blood lost via the cervix during and after the procedure. The device also applies light suction to the uterus, which can aid in uterus collapse and decrease the risk of postpartum hemorrhage.

Gait Analysis Device For Elderly Fall Prediction, Ryan Hahn, Claudia Miller, Evan Yakligian

Biomedical Engineering

This document serves to outline the design process and final design for our project to address elderly independent living in collaboration with Apple. Included in this document is necessary academic literature of current fall risk assessments and descriptions of the current market of wearable gait analysis devices. Based on this research and data, we then outline a plan for design, manufacturing, prototyping, and testing a device to fulfill the original prompt given by our sponsors: create a device that will increase the ability of an aging loved one to live at home safely. This device is a wearable that collects …

Deutj: An Imagej Plugin For Improved Automatic Masking And Segmentation Of Images From Confocal Microscopy, Sunny Cui

Independent Student Projects and Publications

Due to advances in microscopic imaging, there are a plethora of biological molecules that can now be tagged and subsequentially imaged from almost any cell, organism, or tissue. However, the ability of software to analyze these images remains to be a challenge. ImageJ is open source software that allows for the processing of these images, but faces challenges when dealing with images that show weak contrast between objects of interest and background. DeutJ is an ImageJ plugin that color corrects and brightness corrects gradients that inhibit segmentation in confocal microscopy images. It can analyze hundreds of images from a given …

Concurrent Validity Study Of 3d Motion Measurement Systems: Vicon Vs. Xsens, Pias Das

Masters Theses

As the Inertial Measurement System (IMS) being a potential alternative to the Optoelectronic Measurement System (OMS) in terms of capturing comprehensive and objective musculoskeletal data, they need to be verified concurrently with the OMS before we start using the IMS in clinical motion analysis. To achieve this, a concurrent validity experiment of the Xsens system (IMS) in comparison to the Vicon system (OMS) was conducted for both upper and lower extremity movements during walk, squat, and lateral lunge (left and right) to quantify the degree of similarity of kinematic data between the two systems by direct comparison, root mean square …

Gesture-Based American Sign Language (Asl) Translation System, Kayleigh Moore, Stefano Pecile, Mahdi Yazdanpour

Posters-at-the-Capitol

According to the World Health Organization (WHO), over 5% of the world's population experiences severe hearing loss. Approximately 9 million people in the U.S. are either functionally deaf or have mild-to-severe hearing loss. In this research, we designed and implemented a translation interface which turns American Sign Language (ASL) gestures captured from a pair of soft robotic gloves into text and speech instantaneously.

We used a combination of flex sensors, tactile sensors, and accelerometers to recognize hand gestures and to record hand and fingers positions, movements, and orientations. The digitized captured gestures were then sent to our proposed translation interface …

Design And Fabrication Of A Force-Displacement Control Mechanism For Bone-Surgical Tool Testing, Kenneth Nwagu

College of Graduate Studies: Theses & Dissertations

This project focuses on the design and fabrication of an experimental setup for orthopedic-tool testing, tailored for a surgical instrumentation company. The multifaceted project encompasses a literature review, conceptual design, prototyping, and rigorous testing, resulting in a versatile control system capable of assessing various orthopedic tools, including bone drills, saws, burrs, and power handpieces.

Orthopedic surgical procedures (which include cutting and/or drilling into bone) often need to be performed on bones for faster recovery. The drilling and cutting process can cause an increase in temperature at the cutting site which can cause bone necrosis. The tools also need to be …

Zinc Oxide Based Nanomaterials And Device Designs - For Bioenergy Harvesting, Sensing And Water Purification, Congran Jin

Dartmouth College Ph.D Dissertations

Biomechanical energy harvested from the human body can power implantable electronics such as cardiac pacemakers, replacing conventional batteries and offering a lifelong energy solution. The electrical signals converted from biomechanical motions contain vital physiological information, making them suitable as a sensor to monitor one's health condition. Zinc Oxide (ZnO) is a versatile material with various intriguing properties, including piezoelectricity, photo-catalytic and piezo-catalytic properties. This thesis aims to exploit and enhance these properties of ZnO by rationally designing its nano- and micron-structures and employing them, along with other functional materials, in the development of novel biomechanical energy harvesting, water purification, and …

A Wearable Fiber-Free Optical Sensor For Continuous Measurements Of Cerebral Blood Flow And Oxygenation, Xuhui Liu

Theses and Dissertations--Biomedical Engineering

Wearable technologies for continuous monitoring of cerebral hemodynamics in freely behaving subjects not only advance our understanding of cognitive processing and adaptive behavior, but also provide vital information for diagnosis and therapeutic assessment of cerebral diseases associated with hypoxia/ischemia. Wearable near-infrared diffuse optical techniques have been used at the bedside to probe deep cerebral hemodynamics, including near-infrared spectroscopy (NIRS) for cerebral oxygenation measurement and diffuse correlation spectroscopy (DCS) for cerebral blood flow (CBF) measurement, respectively. However, most systems are relatively large and expensive, and use rigid fiber-optic probes that significantly constrain subject’s movement. A novel, wearable, fiber-free diffuse speckle contrast …

Mechanical Design Of A Microwave Imaging Device For Breast Cancer Detection In Mri Scanners, Grace M. Player

Dartmouth College Master’s Theses

This project seeks to develop an updated version of a microwave imaging device for use in conjunction with breast MRI, improving upon existing technology and developing novel concepts for the device. It posits three primary redesign targets for updating the previous system: resizing the system height, making the device more iteration- friendly, and improving the overall manufacturability of the device by replacing custom components with commercially available alternatives. All three of these redesign targets are met in the new design, V2.0. The height is reduced by reducing antenna travel and height, embedding some components, and shortening the tank wall, resulting …

Mouthpiece For Patients With Neuromuscular Disorders, Rebekah Starkey, Carissa Thompson, Michael Dickens, Andrew Pero

Williams Honors College, Honors Research Projects

Neuromuscular Disorders (NMDs) impact people throughout the world. An early hallmark of these disorders includes some degree of facial muscle weakness. Respiratory testing is important to evaluate the progression of these patients’ NMDs. However, these tests require that the patient purses their lips around a mouthpiece to create a tight seal. This is a difficult task for one with facial muscle degeneration. This often leads to results that fail to reflect the patient’s true respiratory ability and prevents their physician from providing the appropriate degree of care. The objective of this project was to develop a face mask or mouthpiece …

Neonatal Intraocular Injection And Delivery System, Nina Treacher, Cory Ramsey, Marie Kosco, Jackson Carrell

Williams Honors College, Honors Research Projects

The proposed project is a way to deliver liquid medicine into the neonatal eye to prevent retinal detachment with lower risk for bacterial infection and drug misplacement. Currently, ophthalmologists use diabetic needles to introduce medication to the neonate eye. They estimate the injection location with hand-held calipers. This may allow the medicine to be misplaced from poor needle placement and introduce preventable error. The goal is to improve the delivery system ophthalmologists currently use by investigating ways to alter or enhance commonly used injection systems to make the procedure safer and more effective.

Side Cutting Biopsy Needle For Endoscopes, Cade Smarr, Ella B. Brinkman, Christine Skakun, Vincent Grosso

Williams Honors College, Honors Research Projects

Develop a side cutting biopsy needle that fits through the working channel of the endoscope similar to stereotactic needle with syringe suction to overcome the small biopsy samples due to instrument size limitations. The problem users are facing is that the biopsy samples through the endoscope are small secondary to instrument size limitations. The idea for this problem is to develop a side cutting biopsy needle that fits through the working channel of the endoscope similar to stereotactic needle, syringe suction.