Biomedical Devices and Instrumentation Commons^™

A New Electroencephalography Electrode Design For Curly And Kinky Hair Types, Elena Butler

Department of Agricultural and Biological Systems Engineering: Dissertations, Theses, and Student Research

Medical discrimination and implicit bias are present in both societal systems and into the design and validation of medical devices. Traditional electroencephalography (EEG) systems often fail to provide reliable physiological recordings on curly and kinky hair types (3B–4C), associated typically with Black American and others of African descent. EEG on these hair types often results in high electrode-scalp impedance, poor signal quality, and participant discomfort. Consequently, such technical biases contribute to the underrepresentation of these populations in neuroscience research and clinical diagnostics, while simultaneously limiting equitable access to EEG-based medical care.

To address this gap, a novel conductive electrode attachment …

Synthesis And Study Of Stable Organic Radicals For Mri Contrast Agents And New Materials, Sabina Dhakal

Dissertations and Doctoral Documents, University of Nebraska-Lincoln, 2023–

The first part of this dissertation focuses on the design, synthesis, and characterization of a thermally robust S =1/2 phototetrazolinyl monoradical and the development of synthetic methodologies for a high-spin (S = 1) phototetrazolinyl diradical. Electrochemical studies of the phototetrazolium cation (precursor to the monoradical) revealed a remarkably narrow electrochemical band gap (Ecell ≈ 0.82 V), suggesting promising electrical conductivity. Thermal analysis of the monoradical demonstrated excellent stability, with the onset of decomposition at 232 °C. Building on the excellent thermal stability and promising properties for electrical conductivity of the monoradical, we developed two condensation-based synthetic routes that provide viable …

Next-Generation Biomedical Implants And Stimuli Responsive Soft Optical Arrays Via Surface Functionalized Elastomeric Materials, John M. Kapitan

Dissertations and Doctoral Documents, University of Nebraska-Lincoln, 2023–

The demands of emerging technologies, such as soft robotics, stretchable electronics, and next generation biomedical implants, has led to the development of diverse polymeric and hybrid organic/inorganic materials specifically tuned to meet these challenges. These materials typically have low Young’s moduli and are inert with high chemical stability. However, this has led to materials that are static in nature, lacking any meaningful way of responding to changes in their environment and adapting to these changes. This has driven a shift towards the design, manufacturing, and characterization of various stimuli responsive surfaces, relying on precise control of surface chemical coatings and …

Robust Quantification Of Cortical Hemodynamic Response To Tactile Stimulation: A Comprehensive Fnirs Methodology To Mitigate Physiological Confounds, Mohsen Hozan

Dissertations and Doctoral Documents, University of Nebraska-Lincoln, 2023–

This dissertation establishes a quantitative framework for studying somatosensory processing using functional Near-Infrared Spectroscopy (fNIRS), with a focus on applications in neurorehabilitation. The central aim is to investigate how the brain's hemodynamic response is modulated by the velocity of patterned tactile stimulation. While fNIRS is a promising neuroimaging tool, its data quality is often compromised by physiological noise and motion artifacts, challenging the reliability of its findings and hindering the development of effective, quantifiable neurotherapeutics.

Two preliminary investigations informed the final experimental design. The first pilot study confirmed that pneumotactile stimulation of the hand, during both passive (somatosensory) and active …

Exploring The Use Of Virtual Reality In Designing And Prototyping Medical Devices, Evan Marsh

Honors Program: Senior Projects (Public)

A degree in engineering is highly sought after in the United States. Despite the grueling coursework and sacrifices involved in earning an engineering degree, the rewards after college are numerous. However, the engineering field is vast, and the degree obtained is not always the profession followed in industry. A lot of what we learn in the college of engineering is very broad and surface-level. It is worth noting that only about 10% of what engineering students learn in school is applicable in the workplace, but they wish they had learned a lot more about that 10%.

A Device For Measuring Acoustic Output Intensity Of Transcranial Doppler Ultrasound Transducers For Comparison With Fda Regulations, Sarah Altman, Gregory Bashford, Benjamin Hage

Honors Program: Senior Projects (Public)

Transcranial Doppler Ultrasonography (TCD) is a non-invasive methodology which can evaluate cerebral blood flow velocity in real time. Single-element focused circular transducers placed on the scalp produce ultrasound waves capable of penetrating the skull with minimal aberration, enabling measurement of the Doppler shift. As such, TCD can measure blood flow velocity in the internal carotid and vertebral arteries, as well as the arteries of the Circle of Willis: the Anterior Cerebral (ACA), Posterior Cerebral (PCA), and Middle Cerebral Arteries (MCA). Intracranial aneurysm and ischemic stroke are serious conditions in which ballooning or occlusion of cerebral vessels cause insufficient perfusion, leading …

Development Of A Decellularized Hydrogel Composite And Its Application In A Novel Model Of Disc-Associated Low Back Pain In Female Sprague Dawley Rats, David Lillyman

Department of Agricultural and Biological Systems Engineering: Dissertations, Theses, and Student Research

Chronic low back pain is a global socioeconomic crisis compounded by an absence of reliable, curative treatments. The predominant pathology associated with chronic low back pain is degeneration of intervertebral discs in the lumbar spine. During degeneration, nerves can sprout into the intervertebral disc tissue and be chronically subjected to inflammatory and mechanical stimuli, resulting in pain. Pain arising from the intervertebral disc, or disc-associated pain, is a complex, multi-faceted disorder which necessitates valid animal models to screen therapeutics and study pathomechanisms of pain.

While many research teams have created animal models of disc degeneration, the translation of these platforms …

Development Of An Intraperitoneal Catheter Placement Device For Use On The Battlefield, Riley Reynolds

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

The objective of this project was to simplify peritoneal cavity access so an Airforce field medic can safely infuse oxygen microbubbles (OMBs) into the intraperitoneal space for the emergency treatment of hypoxia due to lung damage. To solve this problem, we created an intraperitoneal catheter placement device for use on the battlefield. The three common methods and some of the most common devices for peritoneal cavity access were reviewed. Injury frequencies for each of the three methods were analyzed. The results showed that each of the access techniques gives a similar rate of iatrogenic injury.

The battlefield conditions where the …

Preclinical Development Of Single Walled Carbon Nanotube-Based Optical Biosensors, Eric M. Hofferber

Department of Agricultural and Biological Systems Engineering: Dissertations, Theses, and Student Research

High resolution, long-term monitoring of key biological analytes would improve patient outcomes by providing earlier detection of disease states and improved efficacy of treatment. One class of biosensors that have gained much attention in recent years are optical biosensors. Optical probes are attractive biosensors due to their noninvasive nature of detection, as certain light can pass through tissue, water, and blood. Single walled carbon nanotubes (SWNT) are a specific type of optical biosensor that fluoresce in the near infrared range of the electromagnetic spectrum and offer unparalleled spatial and temporal resolution. SWNT have been applied as biosensors in vitro, …

Sensitray: An Integrated Measuring Device For Monitoring Children’S Mealtime Dietary Intake, Hunter S. Guru, Anthony D. Weng, Santosh Pitla, Dipti Dev

Department of Child, Youth, and Family Studies: Faculty Publications

Childhood nutrition establishes consumption norms that affect an individual’s health over the course of their lives. However, early nutrition interventions to establish such norms are uncommon owing to the various inefficiencies associated with current methods of measuring childhood nutrition. Here, we present an IoT measuring device, called the SensiTray, which accurately tracks mealtime intake in a child-friendly and cost-effective fashion. Principal technologies underlying the SensiTray (including mass-sensing technologies, microcontrollers) are identified and analyzed, along with other design choices. Operation of the SensiTray is explained with special attention given to SensiTray software peripherals and algorithms. Preliminary testing consisted of static and …

“Gobabygo!” Rehab Engineering To Make Children Mobile, Connor Albin, Chase M. Pfeifer

UCARE: Research Products

GoBabyGo! is a project to give children with movement difficulties a chance to move on their own. GoBabyGo! conducts community builds of modified ride-on-cars for these children and grants them mobility. Once issue is that once children have cars, there is no feedback to improve future builds. This project "“GoBabyGo!” – Rehab Engineering to Make Children Mobile," wishes to collect quantifiable data on how these cars are being used and how they can be improved. This project aims to do this by collecting surveys from caretakers and through a programmed module to be installed in cars. The installed car module …

The Impact Of Extreme Virtual Elevation Above Grade On Construction Workers' Physiological Responses, Physical Responses, And Task Performance, Mahmoud Habibnezhad

Department of Construction Engineering and Management: Dissertations, Theses, and Student Research

On average, in every two work hours, one person dies from work-related injuries at construction sites. Most incidents are due to falling from elevated surfaces. Slips, trips, and loss of balance are the main causes. Studies suggest that instigating visual mismatch and physiological changes are among the most important reasons behind falling from narrow elevated surfaces. By using advanced virtual reality models, this dissertation aims to highlight some of the possible effects of a destabilizing environment (i.e., elevation above grade) on workers’ physiological responses and task performance. More specifically, this dissertation strives to find potential effects of elevation above grade …

Design Of A Distributed Real-Time E-Health Cyber Ecosystem With Collective Actions: Diagnosis, Dynamic Queueing, And Decision Making, Yanlin Zhou

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

In this thesis, we develop a framework for E-health Cyber Ecosystems, and look into different involved actors. The three interested parties in the ecosystem including patients, doctors, and healthcare providers are discussed in 3 different phases. In Phase 1, machine-learning based modeling and simulation analysis is performed to remotely predict a patient's risk level of having heart diseases in real time. In Phase 2, an online dynamic queueing model is devised to pair doctors with patients having high risk levels (diagnosed in Phase 1) to confirm the risk, and provide help. In Phase 3, a decision making paradigm is proposed …

Ring And Peg Simulation For Minimally Invasive Surgical Robot, Evan Brown

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

Surgical procedures utilizing minimally invasive laparoscopic techniques have shown less complications, better cosmetic results, and less time in the hospital than conventional surgery. These advantages are partially offset by inherent difficulties of the procedures which include an inverted control scheme, instrument clashing, and loss of triangulation. Surgical robots have been designed to overcome the limitations, the Da Vinci being the most widely used. A dexterous in vivo, two-armed robot, designed to enter an insufflated abdomen with a limited insertion profile and expand to perform a variety of operations, has been created as a less expensive, versatile alternative to the Da …

A Strategic Audit Of Medtronic Plc, Jozzy Carter

Honors Program: Senior Projects (Public)

Humans will always have a need for healthcare, and as the world continues to innovate in the tech space, consumers will demand advances in medicine and medical devices. Medtronic is at the forefront of this innovation but faces intense competition in the medical technologies industry. This poses the question: what can Medtronic do to continue its growth and stay competitive in this space? This paper offers an analysis of Medtronic as a medical device company by offering insight to its competitive advantage, financials, business mix, and value chain. It also analyzes the forces that affect Medtronic using SWOT, PEST, and …

Development Of Peritoneal Microbubble Oxygenation As An Extrapulmonary Treatment For Hypoxia, Nathan Legband

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

Patients affected by a respiratory disease or injury experience a substantially impaired respiratory system and as a consequence are unable to obtain a sufficient amount of oxygen. Hypoxia can quickly result in developing permanent tissue damage or death. Currently, the medical methods of treating hypoxia are mechanical ventilation or extracorporeal membrane oxygenation. However, these treatments are ineffective in certain cases and possess significant additional risks including barotrauma, infection, hemorrhage, and thrombosis.

The extrapulmonary method of peritoneal oxygenation has been investigated by other research groups as a potential alternative to providing supplemental oxygen in hypoxic animals. In peritoneal oxygenation, the peritoneum, …

Design And Validation Of An In Vivo Long-Term Attachment Capsule Robot, Wanchuan Xie

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

The invention of capsule endoscopy (CE) made the non-invasive monitoring of the entire small bowel possible and became the primary means for diagnosing small bowel pathology. In the last decade, capsule robots have been transformed from diagnostic devices into a widely studied biomedical platform with the potential for active locomotion, drug delivery and therapeutic capabilities. To perform accurate on-site drug release and therapy, it is necessary for a capsule robot to be able to attach to the intestinal tissue and maintain its position long-term. Design challenges derive from the task of long-term mucosal adhesion which requires firm, quick-response attachment without …

A Novel Biochamberfor Modeling Of Atherosclerotic Arteries: In Vitro Capabilities And Applications, Iman Salafian, Angelos Karagiannis, Benjamin S. Terry, Yiannis S. Chatzizisis

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

Atherosclerosis is a chronic disease that involves the lipid accumulation and inflammation of the arterial wall [1,2]. Despite great efforts,its pathophysiology has not been fully elucidated. Existent drugs can reduce its progression but there are no available drugs to prevent its complications [3,4]. Atherosclerosis remains the leading global cause of death[5].

The purpose of this work is to design and build a customized biochamber which can be used for the following studies:

•Study the pathophysiology of atherosclerosis in vitro & ex vivo

•Investigate the mechanisms of atherosclerotic plaque disruption

•Examine the direct effect of different anti-atherosclerotic drugs on lesions

•Use …

Repair And Regeneration Of Chondral Defects: An In Vitro Study Demonstrating Feasibility And Mechanism Under Low Intensity Ultrasound, Neety Sahu, Anuradha Subramanian

Department of Chemical and Biomolecular Engineering: Dissertations, Theses, and Student Research

Holistic repair of damaged cartilage remains an unsolved biomedical problem. Current methods that employ microfracture (MF) or autologous chondrocyte implantation (ACT) or tissue engineered strategies yield inferior repaired cartilage (Fig. 1). Lack of chondroinductive factors at the site of injury, in vivo, has been identified as a factor that limits repair. Clinically amenable strategies that can improve repair are desired. A novel clinically translatable repair strategy based on low-intensity-ultrasound (US) is proposed (Fig.2). Differently from all approaches that use US, our approach employs US at the cell resonant frequency where bioeffects are maximized. We have shown that US impacts the …

Design Of A Flexible Control Platform And Miniature In Vivo Robots For Laparo-Endoscopic Single-Site Surgeries, Lou P. Cubrich

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

Minimally-invasive laparoscopic procedures have proven efficacy for a wide range of surgical procedures as well as benefits such as reducing scarring, infection, recovery time, and post-operative pain. While the procedures have many advantages, there are significant shortcomings such as limited instrument motion and reduced dexterity. In recent years, robotic surgical technology has overcome some of these limitations and has become an effective tool for many types of surgeries. These robotic platforms typically have an increased workspace, greater dexterity, improved ergonomics, and finer control than traditional laparoscopic methods. This thesis presents the designs of both a four degree-of-freedom (DOF) and 5-DOF …

Diffusion Modeling And Device Development For Peritoneal Membrane Oxygenation, Liana Hatoum

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

Acute respiratory distress syndrome (ARDS) is a pulmonary disease that causes hypoxemia and respiratory failure. The mortality rate for ARDS ranges between 27% and 45%. Current treatments including mechanical ventilation and extracorporeal membrane oxygenation (ECMO) are often associated with high risk complications including barotrauma, infection, thrombosis, and hemorrhage. Alternative pulmonary support techniques are needed to improve the survival rate of patients suffering from ARDS. Previous studies introducing pure O₂ gas, perfluorocarbons and red blood cells into the intraperitoneal (IP) cavity have reported no effect or only a mild increase in oxygenation. Here we report peritoneal membrane oxygenation (PMO) using …

Design Of Medical Devices For Diagnostics In The Gastrointestinal System, Charles R. Welch

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

This thesis presents the design, controls, and testing of two systems: a novel colonoscope locomotion design for diagnostics, and a biosensor capsule that implants a sensor in the small intestine. Each system requires special design considerations for use in the gastrointestinal system.

Colonoscopy procedures are recommended as a screening for colon cancer and related conditions after the age of 50. The need for an improved colonoscope that reduces the colonoscopy time and patient discomfort is apparent. The semi-autonomous device presented here could likely reduce the colonoscopy procedure time by allowing the physician to focus more on the diagnosis and less …

Circle Of Willis Model For Transcranial Doppler Ultrasound Training, Conner J. Beyersdorf, Ben Hage, Greg Bashford

UCARE: Research Products

Transcranial Doppler (TCD) ultrasound is a technique involving the use of high frequency transmitters to measure intracranial blood flow. The brain is supplied by blood in an arterial anastomosis called the Circle of Willis. Using TCD ultrasound on the circle is difficult and requires practice and teaching. A functional model of the Circle of Willis could prove to be a valuable teaching tool. Through the use of AutoCAD and 3D printing software, an anatomically accurate model was created and set in gelatin phantom inside of a plastic skull. Milk was pumped through the model with a peristaltic pump to simulate …

Expanded 3d Nanofiber Scaffolds: Cell Penetration, Neovascularization, And Host Response, Jiang Jiang, Zhuoran Li, Hongjun Wang, Yue Wang, Mark A. Carlson, Matthew J. Teusink, Matthew R. Macewan, Linxia Gu, Jingwei Xie

Department of Mechanical and Materials Engineering: Faculty Publications

Herein, a robust method to fabricate expanded nanofiber scaffolds with controlled size and thickness using a customized mold during the modified gas-foaming process is reported. The expansion of nanofiber membranes is also simulated using a computational fluid model. Expanded nanofiber scaffolds implanted subcutaneously in rats show cellular infiltration, whereas non-expanded scaffolds only have surface cellular attachment. Compared to unexpanded nanofiber scaffolds, more CD68+ and CD163+ cells are observed within expanded scaffolds at all tested time points post-implantation. More CCR7+ cells appear within expanded scaffolds at week 8 post-implantation. In addition, new blood vessels are present within the expanded scaffolds at …

Feasibility Of Using Raman-Based Techniques For Breast Cancer Detection, Sara Mollamohammada

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

Breast cancer is one of the common types of cancer among women all over the world. Early diagnosis is an effective way that improve the treatment process and gives the patients a better chance of survival. Many of the patients infected by breast cancer choose breast conservation surgery (BCS). However, some of those will be subjected to mastectomy, and many will have tumor recurrence as there is no precise technique to show the tumor margins. Raman-based methods are powerful techniques with potential to rapidly differentiate normal from tumor tissues and provides a solution to detect tumor margin. This is because …

Breast Cancer/Stromal Cells Coculture On Polyelectrolyte Films Emulates Tumor Stages And Mirna Profiles Of Clinical Samples, Amita Daverey, Karleen M. Brown, Srivatsan Kidambi

Department of Chemical and Biomolecular Engineering: Faculty Publications

In this study, we demonstrate a method for controlling breast cancer cells adhesion on polyelectrolyte multilayer (PEM) films without the aid of adhesive proteins/ ligands to study the role of tumor and stromal cell interaction on cancer biology. Numerous studies have explored engineering coculture of tumor and stromal cells predominantly using transwell coculture of stromal cells cultured onto coverslips that were subsequently added to tumor cell cultures. However, these systems imposed an artificial boundary that precluded cell−cell interactions. To our knowledge, this is the first demonstration of patterned coculture of tumor cells and stromal cells that captures the temporal changes …

Applications Of Novel Mri Technologies In Tissue Engineering And Disease Diagnosis, Vahid Khalilzad-Sharghi

Department of Agricultural and Biological Systems Engineering: Dissertations, Theses, and Student Research

Magnetic resonance imaging (MRI) and magnetic resonance elastography (MRE) are increasingly under investigation to explore their potential role in establishing effective evaluation methods for the procedure of tissue regeneration carried out in vitro, in vivo, and in disease diagnosis. To this end, there is a continuous pursuit of novel tools both in vitro and in vivo. For instance, there is a great need for the development and evaluation of an MR-compatible incubation system that enables simultaneous monitoring and culturing of cell and tissue constructs using MRI techniques. Such an imagingcompatible incubation system eliminates exposing the culture to the risks of …

Implementation And Validation Of Aortic Remodeling In Hypertensive Rats, Shijia Zhao, Linxia Gu

Department of Mechanical and Materials Engineering: Faculty Publications

A computational framework was implemented and validated to better understand the hypertensive artery remodeling in both geometric dimensions and material properties. Integrating the stress-modulated remodeling equations into commercial finite element codes allows a better control and visualization of local mechanical parameters. Both arterial thickening and stiffening effects were captured and visualized. An adaptive material remodeling strategy combined with the element birth and death techniques for the geometrical growth were implemented. The numerically predicted remodeling results in terms of the wall thickness, inner diameter, and the ratio of elastin to collagen content of the artery were compared with and fine-tuned by …

Implementation And Validation Of Aortic Remodeling In Hypertensive Rats, Shijia Zhao, Linxia Gu

Department of Mechanical and Materials Engineering: Faculty Publications

A computational framework was implemented and validated to better understand the hypertensive artery remodeling in both geometric dimensions and material properties. Integrating the stress-modulated remodeling equations into commercial finite element codes allows a better control and visualization of local mechanical parameters. Both arterial thickening and stiffening effects were captured and visualized. An adaptive material remodeling strategy combined with the element birth and death techniques for the geometrical growth were implemented. The numerically predicted remodeling results in terms of the wall thickness, inner diameter, and the ratio of elastin to collagen content of the artery were compared with and fine-tuned by …

An Experimental Study Of The Implementation Of A Fluid Diode Inside A Sano Shunt, Patrick Austin Lane

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

Fluid diodes are fluidic devices that enhance fluid flow in a particular direction while inhibiting it in the opposite direction without the use of moving parts. This is accomplished through the use of nozzle shaped geometry on one side of the diode, and cusp shaped geometry on the opposing side. Fluid meets very little resistance as is travels though the nozzle side of the diode. The cusps on the other side of the diode reduce the effective flow area, thereby inhibiting flow. The objective of this study is to determine the effectiveness of a fluid diode installed in a reconstructed …