Biomaterials Commons^™

Extraction Of Melanin From Black Knot Fungus: Optimization And Applications, Amara Davis

Williams Honors College, Honors Research Projects

The goal of this research project was to optimize the extraction of melanin from black knot fungus and to analyze possible applications of the extracted melanin. An extraction method that was previously created was examined for possible improvements. Improvements that were studied include the elimination of steps in the extraction process while obtaining the same quality of product, examining options for machinery that could be used to increase production rate when moved to a production plant setting, and optimize the concentrations of the raw materials that are used in the extraction for possible reduction of cost without compromising yield or …

Comparison Effect On Biogas Production From Vegetable And Fruit Waste With Rumen Digesta Through Co-Digestion Process, Anika Tasnim, Muhammad Rashed Al Mamun, Md Anwar Hossen, Md Towfiqur Rahman, Md Janibul Alam Soeb

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Biogas is the best renewable energy as it can be produced from any biomass for example any plant or living organism. The purpose of this research was to produce biomethane from co-digestion of vegetable and fruit waste with rumen digesta through anaerobic digestion process. In this research, two trials of experiment were conducted. Each trial has three different sample with different mixing ratios. Raw materials used in the experiment was rumen digesta of goat and cow, potato, capsicum, cucumbers, onions, radish, cauliflower, carrot, leafy vegetables, apple, banana, and papaya. In each sample, 1200 gram of raw materials were used. Hydraulic …

Plasmonically-Enhanced Dna-Rna Hybrid-Based Bioassay For Amplification-Free Quantification Of Sars-Cov-2, Yuxiong Liu

McKelvey School of Engineering Graduate Student Theses & Dissertations

Corona Virus Disease 2019 (COIVD-19), caused by severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), is a highly infectious respiratory illness. Within just a few months, it spread around the whole world and became a global pandemic. Real-time reverse-transcription polymerase chain reaction (RT-PCR) works as a gold standard method diagnosing COVID-19 with high sensitivity and specificity. But due to the programs of RT-PCR, it usually takes more than 24 hours to get the results while specialized devices are also required. False-negative results can happen as well using RT-PCR which increase the risk of spreading coronavirus. To promote quicker detection of COVID-19, …

A Survey Of Stainless Steel In Medical And Surgical Application, Noah Slack, Clint Balch

ME 4133/6133 Mechanical Metallurgy

Stainless steels can be separated into four families based on the microstructure of the material: Austenitic, Ferritic, Martensitic, and Duplex. Each family provides a specific set of advantages and disadvantages, and material selection should be based on the specific application the material will be used for. For this study, the processing, microstructure, and performance of the four families of stainless steels will be compared in the context of medical device applications. The most important factors in medical device materials are biocompatibility, surface properties, mechanical properties and life span/corrosion resistance. This study will focus on medical devices that will be permanently …

Development And Characterization Of A Decellularized Neuroinhibitory Scaffold Containing Matrix Bound Nanovesicles, Logan Piening

Department of Agricultural and Biological Systems Engineering: Dissertations, Theses, and Student Research

Chronic low back pain (LBP) is a leading cause of disability but treatments for LBP are limited. Degeneration of the intervertebral disc leads to loss of neuroinhibitory sulfated glycosaminoglycans (sGAGs) which allows nerves from dorsal root ganglia (DRG) to grow into the core of the disc, leading to pain. Current treatments for LBP involve drugs that do not target the source of the pain and lack long term efficacy or use invasive surgeries with high complication rates. Treatment with a decellularized tissue scaffold that contains neuroinhibitory components may inhibit nerve growth and prevent disc-associated LBP. Here, a decellularized nucleus pulposus …

A Single Cell Pair Mechanical Interrogation Platform To Study Cell–Cell Adhesion Mechanics, Amir Monemianesfahani

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

Cell-cell adhesion complexes are macromolecular adhesive organelles that integrate cells into tissues. Perturbations of the cell-cell adhesion structure or relatedmechanotransduction pathways lead to pathological conditions such as skin and heart diseases, arthritis, and cancer. Mechanical stretching has been used to stimulate the mechanotransduction process originating from the cell-cell adhesion and cell-extracellular matrix (ECM) complexes. The current techniques, however, have limitations on their ability to measure the cell-cell adhesion force directly and quantitatively. These methods use a monolayer of cells, which makes it impossible to quantify the forces within a single cell-cell adhesion complex. Other methods using single cells or cell …

Efficient Polyhydroxyalkanoate Production By Rhodopseudomonas Palustris From Lignocellulosic Biomass, Brandi Brown

Department of Agricultural and Biological Systems Engineering: Dissertations, Theses, and Student Research

Polyhydroxyalkanoates (PHAs) are biopolymers produced by bacteria with the potential to replace conventional plastics. However, the relatively high production costs of PHAs are keeping them from market acceptance, with approximately half of the production costs derived from the feedstock. Thus, engineering a microbe for PHA production from cheaper and renewable carbon sources is necessary to promote the valorization of PHAs. Lignocellulosic biomass is considered to be one of the most economic carbon sources in the world, and is thus an attractive candidate for cheaper production of bioplastics. Rhodopseudomonas palustris CGA009 is a metabolically robust bacterium capable of catabolizing lignin breakdown …

The Impact Of Myoblast Transplantation On Collateral Capillary Arteriogenesis And Macrophage Phenotype, Christine Hue Do

Biomedical Engineering

Gangrene, pain, loss of limb function, amputation, and death are only few of the grievous consequences associated with peripheral arterial disease (PAD), a vascular disease caused by an obstruction that narrows the blood vessels. Since some patients have collateral vessels that can re-route blood to its downstream destination, much focus has been spotlighted upon discovering the mechanism of this process, termed arteriogenesis, as well as cell therapies to increase arterial diameter of collateral vessels. Since some patients do not have native pre-existing collateral vessels, another method to re-route blood is through arterialized collateral capillaries (ACC), which is the conversion of …

Developing Aligned Nerve Scaffolds In A 3d Type-I Collagen Gel, Gabriel David

Biomedical Engineering Undergraduate Honors Theses

Despite significant progress in the field of peripheral nerve repair, clinical success is still limited, leaving millions to suffer from peripheral neuropathy with billions spent every year for treatment. Nerve repair methods that are capable of maximizing the regenerative properties of peripheral nerves are greatly desired in the field of medical science. This research aims to fill the gap between modern methods and the future of nerve repair by creating type-I collagen scaffolds with aligned degradation pores that will assist and nurture nerves growing through them. This is achieved by incorporating adipose stem cells into type-I collagen hydrogels and aligning …

Evaluating The Effects Of Wood Source On The Physicochemical Properties Of Crosslinked Cellulose Nanocrystals, Helena Tchoungang Nkeumen

Graduate Theses and Dissertations

Cellulose is an abundant and naturally occurring biopolymer that has been used by humans for food, shelter, and clothing for about two centuries now. Highly crystalline nanoparticles derived from cellulose, called cellulose nanocrystals (CNCs), show great potential to meet the rising need for sustainable and nontoxic materials for biomedical applications. However, multiple biomedical applications of CNCs, such as those involving their use in tissue engineering scaffolds, require CNC-based structures to be stable in aqueous environments, a property that native CNCs do not possess due to their inherent hydrophilicity. Chemical crosslinking of CNCs addresses this issue by providing aqueous stability to …

Development Of The Cell-Free Protein Biomanufacturing Platform For The Therapeutic Human Protein Production And The Topical Delivery Applications Using The Nanosized Hydrogel System, Jeehye Kim

LSU Doctoral Dissertations

Proteins are highly structural polymers, performing an enormous range of roles within organisms. Unlike synthetic polymers, proteins have a significant hierarchical ordering that can be disrupted by many environmental factors, which limits the scale-up manufacturing capability as well as the utilization of proteins as therapeutic agents. In this study, the Cell-Free Protein Synthesis (CFPS) system was developed to enhance the production capacity and applications of the therapeutic proteins. The CFPS is an advanced biosynthetic and genetic-engineered system. It enables the efficient production of proteins when the conventional cell-based protein synthesis systems cannot be applied, and when sophisticated control is required …

Development Of Light Actuated Chemical Delivery Platform On A 2-D Array Of Micropore Structure, Hojjat Rostami Azmand, Hojjat Rostami Azmand

Dissertations and Theses

Localized chemical delivery plays an essential role in the fundamental information transfers within biological systems. Thus, the ability to mimic the natural chemical signal modulation would provide significant contributions to understand the functional signaling pathway of biological cells and develop new prosthetic devices for neurological disorders. In this paper, we demonstrate a light-controlled hydrogel platform that can be used for localized chemical delivery in a high spatial resolution. By utilizing the photothermal behavior of graphene-hydrogel composites confined within micron-sized fluidic channels, patterned light illumination creates the parallel and independent actuation of chemical release in a group of fluidic ports. The …

Injectable Gelatin-Silk Fibroin Composite Hydrogels For In Situ Cell Encapsulation, Ryann D. Boudreau

Honors Theses and Capstones

Hydrogels are widely used tools for tissue engineering and regenerative medicine. Characterized as biofunctional, water-based polymer matrices with tunable mechanical properties, hydrogels have promising but limited applications in biomedical engineering, due to poor and static matrix strength. Here we plan to rectify this issue by introducing a new hydrogel made from a composite of gelatin and silk fibroin crosslinked by microbial transglutaminase (mTG) instantly and beta sheet formation gradually, respectively. This interpenetrating network (IPN) shows enhanced mechanical stiffness and strength compared to gelatin hydrogels, and is capable of encapsulating human cells with high viability demonstrated by the encapsulation of human …

The Effects Of Solution Condition On Virus Filtration Performance, Fnu Namila

Graduate Theses and Dissertations

Virus filtration is an integral part of the downstream purification of mammalian cell culture-derived biotherapeutics to assure the viral safety of the products. Virus filtration membranes remove viruses based on a size-exclusion mechanism. Commercial parvovirus filers possess unique membrane structure and are designed to remove smaller non-enveloped parvoviruses with size 18-26 nm. However, some filters face issues, such as pre-mature fouling, the decline of filtrate flux, and reduction in virus retention. This doctoral dissertation focused on identifying the factors that influence the filtrate flux and the virus retention capability of commercial virus filters. The effects of solution pH and ionic …

Recombinant Piriform Spider Silk Production, Cole R. Peterson

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Spider silks are remarkable biomaterials, possessing a variety of desirable mechanical and material properties. Humans have long-sought to utilize these materials. Spiders produce a range of different types of silks for different purposes, such as web-building, egg casing, and prey swathing. Because spiders are difficult to farm, a synthetic biological approach must be used to produce silk-like proteins. This research is intended to improve the production of piriform, a specific type of spider silk. This was done with targeted-improvements to microbial metabolism and recovery methodologies. The methods developed in this research are useful for other types of silk production and …

Incorporation Of Lignin In Natural And Synthetic Biomaterials To Alter Mechanical And Biochemical Properties For Enhanced Wound Healing, Jorge Alfonso Belgodere

LSU Doctoral Dissertations

It is estimated that chronic, non-healing wounds affect more than 6.5 million Americans annually, with an estimated healthcare cost beyond $14 billion. Here, we attempted to create composites of natural (collagen type I or gelatin-methacrylate) or synthetic (poly(ethylene glycol) polymers incorporating a natural plant component, lignin, to combat the costs and limitations current wound healing methods face. Three-dimensional matrices of collagen type I (Col I) are widely used in tissue engineering applications for its abundance in many tissues, bioactivity with many cell types, and excellent biocompatibility. Inspired by the structural role of lignin in plant tissue, we found that sodium …

Pilot Study Exploring The Effect Of Targeted Cox-2 Inhibition In Macrophages Responding To Neuronal Injury; Promoting Enhanced Axonal Regeneration, Alyssa Brauckmann

Electronic Theses and Dissertations

Celecoxib nanoemulsion (CXB-NE) has been developed as a macrophage targeted analgesics by Dr. Janjic and her team at Duquesne University, (Janjic et al, 2018; Liu et al, 2020; Saleem et al, 2019b; Vasudeva et al, 2014). The CXB-NE nanoemulsion carrying a Nonsteroidal Anti-inflammatory (NSAID) inhibitor of COX-2 activity result in a reduction in PGE2 expression in macrophages. Using CXB-NE in rats that have peripheral nerve injury constricting the sciatic nerve relieves hypersensitivity, a pain-like behavior. The treatment also decreases inflammation associated with this chronic constriction injury (Janjic et al, 2018; Saleem et al, 2019b; Stevens et al, 2019). In this …

Design Of A 3d Printed Bioreactor For Bone Cancer Research, Brooklyn K. Vanderwolde, Katelyn Hillson

The Journal of Undergraduate Research

Bone cancer is an aggressive disease and has peak occurrence during physiological stimulation of growth and aging. Astronauts who undergo long-term space missions also acquire an increased risk of bone tissue degeneration and cancer. Few in-vitro models currently exist capable of reproducing the complex microenvironment of bone tissue to support multicellular activity in a three-dimensional structure. This limits the ability to understand disease progression and develop suitable treatment strategies. Therefore, developing a bone tissue model and an associated bioreactor is critical to understand the risks associated with cancer progression and improve treatment and preventions related to those risks. The goal …

Deswelling Induced Morphological Changes In Dual Ph And Temperature Responsive Ultra-Low Crosslinked Poly (N-Isopropyl Acrylamide)-Co-Acrylic Acid Microgels, Molla R. Islam, Maddie Tumbarello, L. Andrew Lyon

Engineering Faculty Articles and Research

Poly(N-isopropylacrylamide) microgels prepared without exogenous cross-linker are extremely “soft” as a result of their very low cross-linking density, with network connectivity arising only from the self-crosslinking of pNIPAm chains. As a result of this extreme softness, our group and others have taken interest in using these materials in a variety of bioengineering applications, while also pursuing studies of their fundamental properties. Here, we report deswelling triggered structural changes in poly(N-isopropylacrylamide-co-acrylic acid) (ULC10AAc) microgels prepared by precipitation polymerization. Dynamic light scattering suggests that the deswelling of these particles not only depends on the collapse of …

Modification Of Lipid Microenvironments On Solid Support Structures For Use In Transmembrane Protein Assays, William J. Houlihan

Dissertations and Theses

Gamma-Secretase (γ-secretase) is a transmembrane protease of increasing interest, which has been shown to have significant connections to both cancer and Alzheimer’s disease. γ-secretase cleaves both Notch-1, a transmembrane signaling protein, and Amyloid precursor protein (APP), a transmembrane protein whose cleavage may result in the formation of β-amyloid plaques in the brain. Notch-1 and APP are widely studied proteins that have substantial impacts on the development and proliferation of cancer and Alzheimer’s disease, respectively. Notch-1 partakes in the signaling of apoptosis in damaged and mutated cells, thus its cleavage by γ-secretase within the plasma membrane has ramifications on cell growth …

The Role Of The Mechanical Environment On Cd117+ Endothelial Cell Angiogenesis, Patrick Link

Theses and Dissertations

Angiogenesis is a complex process coordinating cell migration, proliferation, and lumen formation. Changes to the microenvironment regulate angiogenesis through mechanotransduction and cytokine signals. In pulmonary hypertension, something in the process becomes abnormal, resulting in changes to the microenvironment and the formation of a glomerulus of dysfunctional capillaries, called a plexiform lesion. Endothelial cells, expressing CD117 (CD117+ EC clones) increase in the plexiform lesions of pulmonary hypertension, independent of pro-angiogenic VEGF signaling. We hypothesize that the mechanical environment and the macromolecular composition of the extracellular matrix, both, contribute to the aberrant angiogenesis. When we changed the mechanical environment, we changed the …

Production And Biocompatibility Of Spider Silk Proteins In Goat Milk, Richard E. Decker Jr

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Due to its strength, flexibility, and biocompatibility, spider silk is a highly appealing material for applications in the medical field. Unfortunately, natural spider silk is difficult to obtain in large quantities because spiders are territorial and cannibalistic, making them impractical to farm. Synthetic spider silk proteins produced by transgenic hosts such as bacteria and goats have made it possible to obtain the quantities of spider silk needed to study it more fully and to investigate its potential uses. The spider silk proteins produced in our laboratory do not have an optimal purification method to remove all of the non-biocompatible contaminants …

Development And Characterization Of Aqueous-Based Recombinant Spider Silk Protein Biomaterials With Investigations Into Potential Applications, Thomas I. Harris

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Spider silks are incredible natural materials that possess desirable combinations of strength, elasticity, weight, and robustness. Other properties such as biocompatibility and biodegradability further increase the worth of these materials. The possibility of farming spiders is impractical due to spiders’ natural behaviors. Modern biotechnologies have allowed for recombinant spider silk proteins (rSSps) to be produced without the use of spiders. However, the features responsible for spider silks impressive properties can cause difficulties with producing silk materials. A recently developed water-based and biomimetic solvation method has provided a solution to such difficulties and has also led to novel silk biomaterials. Most …

Developing Droplet Based 3d Cell Culture Methods To Enable Investigations Of The Chemical Tumor Microenvironment, Jacqueline Alexandria De Lora

Biomedical Sciences ETDs

Adaptation of cancer cells to changes in the biochemical microenvironment in an expanding tumor mass is a crucial aspect of malignant progression, tumor metabolism, and drug efficacy. In vitro, it is challenging to mimic the evolution of biochemical gradients and the cellular heterogeneity that characterizes cancer tissues found in vivo. It is well accepted that more realistic and controllable in vitro 3D model systems are required to improve the overall cancer research paradigm and thus improve on the translation of results, but multidisciplinary approaches are needed for these advances. This work develops such approaches and demonstrates that new droplet-based cell-encapsulation …

Molded Features In Pdms For Fabricating Bacterial Cellulose For Various Geometries, Mitchell Habegger

Williams Honors College, Honors Research Projects

The purpose of producing features on bacterial cellulose (BC) is to facilitate the elongation and alignment for cells, in this case Normal Human Dermal Fibroblast (NHDF) cells. The elongated cells have applications in wound healing, tissue engineering, disease diagnostics, and many other fields. Experiments were run to test the effectiveness of transferring features to BC sheets from features induced by fracturing on polydimethylsiloxane (PDMS) and those duplicated from molds with existing features. The features were duplicated to BC sheets by either air drying or Guided Assembly-Based Biolithography (GAB). The research results showed that fracture inducing on PDMS produced very small …

Integration Of Biology, Ecology And Engineering For Sustainable Algal‑Based Biofuel And Bioproduct Biorefinery, James Allen, Serpil Unlu, Yaşar Demirel, Paul N. Black, Wayne R. Riekhof

Department of Chemical and Biomolecular Engineering: Faculty Publications

Despite years of concerted research efforts, an industrial-scale technology has yet to emerge for production and conversion of algal biomass into biofuels and bioproducts. The objective of this review is to explore the ways of possible integration of biology, ecology and engineering for sustainable large algal cultivation and biofuel production systems. Beside the costs of nutrients, such as nitrogen and phosphorous, and fresh water, upstream technologies which are not ready for commercialization both impede economic feasibility and conflict with the ecological benefits in the sector. Focusing mainly on the engineering side of chemical conversion of algae to biodiesel has also …

The Effects Of Emerging Technology On Healthcare And The Difficulties Of Integration, Skyler J. Pavlish-Carpenter

Honors Undergraduate Theses

Background: Disruptive technology describes technology that is significantly more advanced than previous iterations, such as: 3D printing, genetic manipulation, stem cell research, innovative surgical procedures, and computer-based charting software. These technologies often require extensive overhauls to implement into older systems and must overcome many difficult financial and societal complications before they can be widely used. In a field like healthcare that makes frequent advancements, these difficulties can mean that the technology will not be utilized to its full potential or implemented at all.

Objective: To determine the inhibiting factors that prevent disruptive technology from being implemented in conventional healthcare.

Methods: …

Rice Hull Bioreactor For Recirculating Aquaculture, Marlon A. Greensword

LSU Doctoral Dissertations

The engineering of floating media biofilters has been optimized over the years. The backwashing process has made them more energy and water efficient. Likewise, moving bed bioreactors (MBBR) are gaining interest and popularity because they are relatively affordable to build. Yet, developing countries’ aquaculture production remains largely excluded from the advances made in recirculating aquaculture systems (RAS). This discrepancy is partially driven by the high costs of media such plastic beads and Kaldnes (KMT) media, commonly used in MBBR.

This dissertation evaluates the usability and profitability of rice hulls (RH), an abundant by-product in many developing nations, as a sinking …

A Tunable, Three-Dimensional In Vitro Culture Model Of Growth Plate Cartilage Using Alginate Hydrogel Scaffolds, Alek G. Erickson, Taylor D. Laughlin, Sarah Romereim, Catherine Sargus-Patino, Angela K. Pannier, Andrew T. Dudley

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Defining the final size and geometry of engineered tissues through precise control of the scalar and vector components of tissue growth is a necessary benchmark for regenerative medicine, but it has proved to be a significant challenge for tissue engineers. The growth plate cartilage that promotes elongation of the long bones is a good model system for studying morphogenetic mechanisms because cartilage is composed of a single cell type, the chondrocyte; chondrocytes are readily maintained in culture; and growth trajectory is predominately in a single vector. In this cartilage, growth is generated via a differentiation program that is spatially and …

Chitosan Nanoparticle Modifications For Improved Gene Delivery In An Oral Dna Vaccine Application, Austin Helmink

Honors Program: Senior Projects (Public)

Vaccines represent one of the most significant medical innovations of the 20^th century, resulting in the eradication or near eradication of a handful of deadly diseases. However, many infectious diseases remain resistant to effective vaccination, largely due to a lack full immune activation by traditional protein-based vaccines. A promising alternative vaccination strategy is the emerging development of DNA vaccines, which rely upon the delivery of exogenous genetic material to host cells encoding for a viral or bacterial antigen in order to induce a robust immune response by closely mimicking live infection. The delivery of genetic material requires a carrier …