Biomedical Engineering and Bioengineering Commons^™

Mineralization Potential Of Electrospun Pdo-Nha-Fibrinogen Scaffolds Intended For Cleft Palate Repair, Isaac Rodriguez

Theses and Dissertations

The overall goal of this study was to identify mineralized scaffolds which can serve as potential alternatives to bone graft substitutes intended for cleft palate repair. The aim of this preliminary study was to evaluate the role of fibrinogen (Fg) and nano-hydroxyapatite (nHA) in enhancing mineralization potential of polydioxanone (PDO) electrospun scaffolds. Scaffolds were fabricated by blending PDO:nHA:Fg in the following weight ratios: 100:0:0, 50:25:25, 50:50:0, 50:0:50, 0:0:100 and 0:50:50. Scaffolds were immersed in different simulated body fluids for 5 and 14 days to induce mineralization. The inclusion of fibrinogen induced sheet-like mineralization while individual fiber mineralization was noticed in …

Cytocompatible Cross-Linking Of Electrospun Zein Fibers For The Development Of Water-Stable Tissue Engineering Scaffolds, Quiran Jiang, Narendra Reddy, Yiqi Yang

Department of Agricultural and Biological Systems Engineering: Faculty Publications

This paper reports a new method of cross-linking electrospun zein fibers using citric acid as a non-toxic cross-linker to enhance the water stability and cytocompatibility of zein fibers for tissue engineering and other medical applications. The electrospun structure has many advantages over other types of structures and protein-based biomaterials possess unique properties preferred for tissue engineering and other medical applications. However, ultrafine fiber matrices developed from proteins have poor mechanical properties and morphological stability in the aqueous environments required for medical applications. Efforts have been made to improve the water stability of electrospun protein scaffolds using cross-linking and other approaches, …

Automated Methods For Fiber Diameter Measurement Of Fibrous Scaffolds, Anna Bulysheva

Theses and Dissertations

The purpose of this work was to develop an automated method of measuring fiber diameters of electrospun scaffolds from scanning electron microscopy images of these scaffolds. Several automated methods were developed and evaluated by comparison to known values and data obtained via the standard manual method. Simulated images with known diameters were used as test images to evaluate the accuracy of each measurement technique. Eight scanning electron microscopy images were also used for the evaluation of the automated methods compared to the standard manual method. All diameter measurements were made in pixels. Five new automated methods coded in MATLAB were …

Assessment Of Electrospinning As An In-House Fabrication Technique For Blood Vessel Mimic Cellular Scaffolding, Colby M. James

Master's Theses

Intravascular devices, such as stents, must be rigorously tested before they can be approved by the FDA. This includes bench top in vitro testing to determine biocompatibility, and animal model testing to ensure safety and efficacy. As an intermediate step, a blood vessel mimic (BVM) testing method has been developed that mimics the three dimensional structure of blood vessels using a perfusion bioreactor system, human derived endothelial cells, and a biocompatible polymer scaffold used to support growth of the blood vessel cells. The focus of this thesis was to find an in-house fabrication method capable of making cellular scaffolding for …

Preparation And Characterization Of An Electrospun Gelatin/Dendrimer Hybrid Nanofiber Dressing, Alicia P. Smith-Freshwater

Theses and Dissertations

A novel dendritic wound dressing was designed and characterized for its potential to treat chronic wounds. Comprised of gelatin, dendrimer, synthetic polymer and antibiotics, the dressing was electrospun to mimic the natural extracellular matrix (ECM). Gelatin is biocompatible, biodegradable, non-toxic, and easily available. The antibiotic, doxycycline, has the ability to inhibit matrix metalloproteinases. Matrix metalloproteinases, which occur in excess in chronic wounds, degrade the reconstituted ECM. Starburst™ polyamidoamine (PAMAM) dendrimer G3.5, which provides a versatile and structurally controlled architecture to construct nanomedicine, was covalently bonded to the gelatin backbone and electrospun into nanofibers with gelatin, doxycycline and stabilizing polymers. The …

Fabrication And Characterization Of Bioactive, Composite Electrospun Bone Tissue Engineering Scaffolds Intended For Cleft Palate Repair, Parthasarathy Madurantakam

Theses and Dissertations

Tissue Engineering is a scientific discipline that aims to regenerate tissues and organs that are diseased, lost or congenitally absent. It encompasses the use of suitable synthetic equivalents of native extracellular matrix that may or may not be supplemented with cells or relevant growth factors. Such scaffolds are designed to reside at the site of implantation for a variable period of time during which they induce the regeneration of native tissue. During this time, they also provide a template for new cells to attach, infiltrate, differentiate into appropriate phenotype and eventually restore function of the concerned tissue. Among the factors …

Tissue Engineering Cellularized Silk-Based Ligament Analogues, Scott Sell

Theses and Dissertations

The resurgence, and eventual rise to prominence in the field of tissue engineering, that electrospinning has experienced over the last decade speaks to the simplicity and adaptability of the process. Electrospinning has been used for the fabrication of tissue engineering scaffolds intended for use in nearly every part of the human body: blood vessel, cartilage, bone, skin, nerve, connective tissue, etc. Diverse as the aforementioned tissues are in both form and function, electrospinning has found a niche in the repair of each due to its capacity to consistently create non-woven structures of fibers ranging from nano-to-micron size in diameter. These …

Preparation And Characterization Of Electrospun Poly(D, L-Lactide-Co-Glycolide) Scaffolds For Vascular Tissue Engineering And The Advancement Of An In Vitro Blood Vessel Mimic, Tiffany Richelle Pena

Master's Theses

PREPARATION AND CHARACTERIZATION OF ELECTROSPUN POLY(D,L-LACTIDE-CO-GLYCOLIDE) SCAFFFOLDS FOR VASCULAR TISSUE ENGINEERING AND THE ADVANCEMENT OF AN IN VITRO BLOOD VESSEL MIMIC

Tiffany Richelle Peña

Currently, an estimated 1 in every 3 adult Americans are affected by one or more cardiovascular complications. The most common complication is coronary artery disease, specifically atherosclerosis. Outcomes of balloon angioplasty treatments have been significantly improved with the addition of drug eluting stents to the process. Although both bare metal and drug eluting stents have greatly increased the effectiveness of angioplasty and decreased the occurrence of restenosis, several complications still exist. For this reason, the stent …

Structural And Functional Considerations In The Design Of Collagen-Based Electrospun Scaffolds, Chantal Ayres

Theses and Dissertations

Electrospinning can be used to selectively process a variety of natural and synthetic polymers into highly porous scaffolds composed of nano-to-micron diameter fibers. This process shows great potential as a gateway to the development of physiologically relevant tissue engineering scaffolds. In this study we examine the structural and functional considerations regarding electrospun scaffolds for dermal template applications using novel quantification techniques. In order to characterize scaffold structure, a technique utilizing the fast Fourier transform was developed to systematically quantify fiber alignment and evaluate how different electrospinning parameters impact the structure and material properties of an electrospun scaffold. Gelatin was suspended …

Angiogenic Potential Of Human Macrophages On Electrospun Bioresorbable Vascular Grafts, Koyal Garg

Theses and Dissertations

The aim of this study was to investigate macrophage interactions with electrospun scaffolds and quantify the expression of vital angiogenic growth factors in vitro. This study will further help in evaluating the potential of these electrospun constructs as vascular grafts for tissue repair and regeneration in situ. Human peripheral blood macrophages were seeded in serum free media on electrospun (10 mm) discs of polydioxanone (PDO), elastin and PDO:elastin blends (50:50, 70:30 and 90:10). The growth factor secretion was analyzed by ELISA. Macrophages produced high levels of vascular endothelial growth factor (VEGF) and acidic fibroblast growth factor (aFGF). Transforming growth factor …

Study Of Electrospinning Of Property-Modulated Biomedical Microfibers, Scott Taylor

All Dissertations

Electrospinning technologies have been of great interest in recent years, due in large part to developments in the field of Bioengineering, including the preparation of novel polymers and advances in tissue engineering, specifically for therapeutic applications. The electrospinning process is, in general, a very benign process that allows the preparation, under mild conditions, of micro- and nano-scale fibers from fiberforming materials, as well as traditionally non-fiber forming materials. This process is of specific interest to the biomedical community because it affords an opportunity to create highly-tailored novel constructs with a multitude of possible uses. Some proposed uses for these materials …

Design Of An Electrospun Type Ii Collagen Scaffold For Articular Cartilage Tissue Engineering, Catherine Pemble Barnes

Theses and Dissertations

Traumatic defects in articular cartilage can lead to joint disease and disability including osteoarthritis. Because cartilage is unable to regenerate when injured, the field of tissue engineering holds promise in restoring functional tissue. In this research, type II collagen was electrospun, cross-linked, and tested as scaffolds for supporting chondrocyte growth. The mechanical, biochemical, and histological characteristics of the engineered tissue were assessed as a function of the electrospinning solution concentration (i.e. scaffold fiber diameter and pore properties) and as a function of the time in culture (evaluated at 2, 4, and 6 weeks). Fiber diameter had a linear relationship with …

Fabrication Of Hydroxyapatite-Biodegradable Polymer Scaffolds By Electrospinning For Potential Bone Tissue Application, Satomi Suzuki

Theses

The purpose of this study is to determine the potential of combining hydroxyapatite (HA) and polymers to form synthetic composite materials used for bone tissue engineering applications. In this study, ceramic-biodegradable polymer composites are fabricated by electrospinning method. The biodegradable polymers used are poly(L-lactic acid) (PLLA), and poly(lactide-co-glycolide) (PLGA). Two types of HA-polymer solutions are first prepared to achieve HA weight percentage of 0, 10, and 25%of the total combined weight of HA and PLLA, and HA and PLGA. The solutions are electrospun to form nanofibrous mats incorporated with HA powder. A biomimetic process was also conducted as a …

Fabrication Of Aligned Nanofiber Yarns, Mats And Isolation Of Single Nanofiber In Electrospinning, Venkatesh T. Nathilvar

Theses

Electrospinning has been extensively used as an effective technique for the fabrication of submicron and nanometer scale polymeric fibers. In spite of technological advances in electrospinning, creating a highly aligned fiber structure is a tough target to be achieved because of the chaotic motion of the electrospinning jet. In this study, two different techniques have been adopted to form a highly aligned nanofibrous scaffolds. Using these methods highly aligned fiber yams and mats are produced from Cellulose Acetate (CA) in a mixed solvent of acetone and water. In both the techniques the nanofibers suspend over the gap in a highly …

Determination Of The Mechanical Properties Of Electrospun Gelatin Based On Polymer Concentration And Fiber Alignment, Leander Taylor Iii

Theses and Dissertations

The process of electrospinning has given the field of tissue engineering insight into many aspects of tissue engineered scaffolds, including how factors such as fiber diameter and porosity are affected by polymer concentration. However, the affects of fiber alignment upon the material properties of electrospun scaffolds remains unclear. The purpose of this study is to determine how the material properties of electrospun gelatin scaffolds are affected by changes in fiber alignment and starting gelatin concentration. Gelatin scaffolds, with starting concentrations of 80, 100, and 130mg/m1, were electrospun onto a target mandrel rotating at various speeds. Samples of each scaffold were …

Electrospinning Of Biphasic Biopolymer And Polymer : A Feasibility And Characterization Study, Sherry Hsiu-Ying Wang

Theses

Electrospinning of polymeric materials have been experimented to achieve nanoscaled diameters. The approaches to the current study are to combine a natural material such as collagen with synthetic materials and determine if the interactions between the materials can be used in the electrospinning process. Collagen is a material of choice due to its biocompatibility. When collagen is combined with polymer, Polyethylene Oxide (PEG), the fiber diameters ranged from 150nm to one micron. The fibers produced have shown drastic phase separation. The next study involved using a duel solvent system to electrospin fibers. The polymer of choice is Poly (1-lactic acid) …

Characterization Of Mechanical Behavior Of Electrospun Non-Woven Mats, Ajitha Patlolla

Theses

Electrospinning is a simple and efficient method for the production of nanometer to micrometer fibers. While the process of electrospinning has been known for over half a century, current understanding of the process and those parameters that affect the properties of the fibers is very limited. Not much work has been done in the field electrospinning process to study the mechanical properties of nonwoven mats produced and to study parameters affecting their properties.

In the first part of this thesis electrospun nonwoven mats made of poly(lactides) solutions were characterized based on their mechanical behavior in biorelevant conditions. In the second …

Characterization Of Electrospun Dlplga Nanofibers For A Drug Delivery System For Intracranial Tumors And Avms, Kimberly A. Griswold

Theses

Electrospinning processes apply electric fields to a polymer solution in order to produce strands of polymer in the nanoscale range. These polymer fibers are manipulated for their porosity, high surface area, fineness and uniformity. In order to create the ideal drug delivery system for intracranial arteriovenous malformations (AVMs) and tumors, D, L poly-(lactice-poly-glycolide) (DLPLGA) nanofibers were electrospun in a tetrahydrofuran (THF) solvent. Three different concentration ratios of DLPLGA, 85/15, 80/20, and 75/25 were analyzed to obtain the prime base for drug annexation. 1 ,3-bis (2-chloroethyl)- 1 -nitrosourea (BCNU) was then codissolved with the DLPLGA nanofibers to form a homogenous solution, …

Fabrication Of Nanofiber Scaffolds By Electrospinning And It's Potential For Tissue Engineering, Shobana Shanmugasundaram

Theses

Electrospinning is a fabrication process that uses an electric field to control the deposition of polymer fibers on to a target substrate. This electrospinning strategy can be used to fabricate fibrous polymer mats composed of fiber diameters ranging from several microns down to tens of nanometers. This study assesses the potential of electrospinning, as an alternative scaffold fabrication technique for tissue engineering applications. In this study, electrospinning is adapted to produce tissue-engineering scaffolds of two different size ranges composed of non-woven poly-L-lactide (PLLA) nanofibers and as a first study, the potential use of these scaffolds as tissue engineering scaffolds was …

Electrospinning As A Processing Method For Electroactive Polymers And Composites, Kristin Joy Pawlowski

Theses and Dissertations

Electrospinning was examined for its potential to create functional materials. Three distinct electroactive materials were electrospun into fibers and fiber mats and then characterized with the intent of determining their utility in aerospace and biomedical applications such as micro-air vehicles and the cardiovascular system. Electrospun Graft Elastomers demonstrated potential as actuators, as electromechanical strain testing showed comparable response to the film form of this material. Further improvement of electroactive response was realized with high dielectric inclusions and fiber orientation. Electrospin processing imparted piezoelectric properties to the fibers of poly(vinylidene fluoride). Differential scanning calorimetry and infrared spectroscopy indicated a degree of …