Biomedical Engineering and Bioengineering Commons^™

A 3d Biomimetic Scaffold Using Electrospinning For Tissue Engineering Applications, Samerender Nagam Hanumantharao

Dissertations, Master's Theses and Master's Reports

Electrospinning holds great promise for designing functional 3D biomimetic scaffolds for tissue engineering applications. The technique allows for the reproducible fabrication of 3D scaffolds with control over the porosity and thickness. In this work, a novel method for the synthesis of a 3D electroactive scaffold using electrospinning from polycaprolactone (PCL), Polyvinylidene Fluoride (PVDF) and Polyaniline (PANI) is reported. Additional scaffolds involving different morphologies of PCL, PCL-PVDF and PCL-PANI-PVDF were also fabricated and evaluated. The scaffolds were characterized using electron microscopy to visualize the morphologies. Infrared spectroscopy was used to confirm the presence of polymers and their respective phases in the …

Molecular Combing Of Dna Nanofibers And Comparison To Electrospinning, Tanner L. Buresh

UCARE: Research Products

The goal of these experiments was to create DNA nanofibers through the method of molecular combing (MC) and then compare the MC fibers to fibers created with electrospinning (ES). The experiment was designed and initial samples were created. After confirming that the method would succeed in creating DNA fibers, several parametric studies were performed in order to optimize the experiment and create the most uniform fibers possible. The parametric studies were done on the following variables: substrate material, pH level of DNA solution, and DNA solution concentration. After completion of all experiments, it was determined that although fibers could be …

Novel Small Airway Model Using Electrospun Decellularized Lung Extracellular Matrix, Bethany M. Young

Theses and Dissertations

Chronic respiratory diseases affects many people worldwide with little known about the mechanisms diving the pathology, making it difficult to find a cure. Improving the understanding of smooth muscle and extracellular matrix (ECM) interaction is key to developing a remedy to this leading cause of death. With currently no relevant or controllable in vivo or in vitro model to investigate diseased and normal interactions of small airway components, the development of a physiologically relevant in vitro model with comparable cell attachment, signaling, and organization is necessary to develop new treatments for airway disease. The goal of this study is to …

Modeling Early Stage Bone Regeneration With Biomimetic Electrospun Fibrinogen Nanofibers And Adipose-Derived Mesenchymal Stem Cells, Michael P. Francis, Yas M. Moghaddam-White, Patrick C. Sachs, Matthew J. Beckman, Stephen M. Chen, Gary L. Bowlin, Lynne W. Elmore, Shawn E. Holt

School of Medical Diagnostics & Translational Sciences Publications

The key events of the earliest stages of bone regeneration have been described in vivo although not yet modeled in an in vitro environment, where mechanistic cell-matrix-growth factor interactions can be more effectively studied. Here, we explore an early-stage bone regeneration model where the ability of electrospun fibrinogen (Fg) nanofibers to regulate osteoblastogenesis between distinct mesenchymal stem cells populations is assessed. Electrospun scaffolds of Fg, polydioxanone (PDO), and a Fg:PDO blend were seeded with adipose-derived mesenchymal stem cells (ASCs) and grown for 7-21 days in osteogenic differentiation media or control growth media. Scaffolds were analyzed weekly for histologic and molecular …

Effect Of Crimping, Multilayering, And Twisting On Polymer Fibers For Acl Replacement, Mariana Ocampo

Theses and Dissertations - UTB/UTPA

The Anterior Cruciate Ligament (ACL) is the most common knee injury in the United States; roughly 150,000 ACL surgeries are performed annually. The ACL lacks self-healing properties due to its location inside the knee’s intra – articular environment (IA). Treatments for ACL ruptures involve the use of autogenous grafts or allografts. More suitable treatments can be found in new bio engineered tissue scaffolds, composed of natural and synthetic polymers. The polymers provide stronger mechanical properties and the ability to promote cell adhesion. It is believed that mimicking the crimping pattern of human ligaments will enhance polymer properties. Four polymers were …

Electrospinning Of Polycaprolactone Core-Shell Nanofibers With Anti-Cancer Drug, Sakib Iqbal, Mujibur Khan, Saheem Absar, Andrew Diamanduros, Samuel Chambers

GS4 Student Scholars Symposium

Encapsulation of a model anti-cancer drug, 5-Fluorouracul (5-FU) into biocompatible core-shell nanofibers of polycaprolactone (PCL) nanofibers was fabricated using a coaxial electrospinning process. Our work aims to solve these issues using a novel method of fabrication of fibers featuring confinement of drugs within a biodegradable core-shell structure, thereby permitting sustained release of drugs to specific sites of treatment, such as tissues affected with tumor cells. The coaxial electrospinning was performed using a sheath polymer solution consisting of a 14 wt% PCL solution and a 5 wt% solution of 5-FU as the core solution. Dimethylformamide (DMF) was used as the solvent …

Fem Of Electrospinning Compared To Inkjet Printing Model, Maikel Ghaly

Theses

Electrospinning is a process that uses electrostatic forces to produce nanofibers, or fibers in the nano scale. Nanofibers are widely used in many fields like drug delivery and tissue engineering. Nowadays, it is gaining much attention in the research community as an advantageous process. However, there are many parameters that controlnanofiber formation. This research intends to develop a model of electrospinning on the basis of an inkjet printer technique by using a computer aided simulation (COMSOL). Inkjet printing is a technique that delivers small volumes at high repetitions which can betransported by electrostatic forces through the air onto their intended …

Peracetic Acid: A Practical Agent For Sterilizing Heat-Labile Polymeric Tissue-Engineering Scaffolds, William R. Trahan

Theses and Dissertations

Advanced biomaterials and sophisticated processing technologies aim to fabricate tissue-engineering scaffolds that can predictably interact within a biological environment at a cellular level. Sterilization of such scaffolds is at the core of patient safety and is an important regulatory issue that needs to be addressed prior to clinical translation. In addition, it is crucial that meticulously engineered micro- and nano- structures are preserved after sterilization. Conventional sterilization methods involving heat, steam and radiation are not compatible with engineered polymeric systems because of scaffold degradation and loss of architecture. Using electrospun scaffolds made from polycaprolactone (PCL), a low melting polymer, and …

Peracetic Acid Sterilization Of Electrospun Polycaprolactone Scaffolds, Suyog Yoganarasimha

Theses and Dissertations

Sterilization of tissue engineered scaffolds is an important regulatory issue and is at the heart of patient safety. With the introduction of new biomaterials and micro/nano structured scaffolds, it is critical that the mode of sterilization preserve these built-in features. Conventional sterilization methods are not optimal for engineered polymeric systems and hence alternate systems need to be identified and validated. PCL is polyester with a low melting point (heat labile), susceptible to hydrolysis and is popular in tissue engineering. Electrospinning generates some nanoscale features within the scaffold, the integrity of which can be affected by sterilization method. Chapter 1 explores …

Design And Fabrication Of A Novel Electrospinning System For Musculoskeletal Tissue Regeneration, Carter L. Chain, Maggie R. Del Ponte, Meng Deng, Feng Yue, Shihuan Kuang

The Summer Undergraduate Research Fellowship (SURF) Symposium

Disease and injury to human tissue, especially musculoskeletal tissue, is a prevalent concern to the public, affecting millions of people each year. Current treatment options involving autografts and allografts are hindered by limited availability and risk of immunogenicity, respectively. In order to overcome these limitations, a transdisiplinary regenerative engineering strategy has emerged with a focus on the development of biomimetic scaffolds that closely mimic the properties of the native tissues. For example, the structure of muscle tissue is characterized by oriented muscle fibers. However, fabrication of aligned nanofiber structures that mimic the anisotropic organization of muscle presents significant engineering challenges. …

Characterizing The Reproducibility Of The Properties Of Electrospun Poly(D, L-Lactide-Co-Glycolide) Scaffolds For Tissue-Engineered Blood Vessel Mimics, Toni M. Pipes

Master's Theses

“Blood vessel mimics” (BVMs) are tissue-engineered constructs that serve as in vitro preclinical testing models for intravascular devices. The Cal Poly Tissue Engineering lab specifically uses BVMs to test the cellular response to stent implantation. PLGA scaffolds are electrospun in-house using the current “Standard Protocol” and used as the framework for these constructs. The performance of BVMs greatly depends on material and mechanical properties of the scaffolds. It is desirable to create BVMs with reproducible properties so that they can be consistent models that ultimately generate more reliable results for intravascular device testing. Reproducibility stems from the consistency of the …

Mammary Epithelial Cells Cultured Onto Non-Woven Nanofiber Electrospun Silk-Based Biomaterials To Engineer Breast Tissue Models, Yas Maghdouri-White

Theses and Dissertations

Breast cancer is one of the most common types of cancer affecting women in the world today. To better understand breast cancer initiation and progression modeling biological tissue under physiological conditions is essential. Indeed, breast cancer involves complex interactions between mammary epithelial cells and the stroma, both extracellular matrix (ECM) and cells including adipocytes (fat tissue) and fibroblasts (connective tissue). Therefore, the engineering of in vitro three-dimensional (3D) systems of breast tissues allows a deeper understanding of the complex cell-cell and cell-ECM interactions involved during breast tissue development and cancer initiation and progression. Furthermore, such 3D systems may provide a …

Developing A Labview Based Thermally Stimulated Current (Tsc) Controller To Measure Residual Charge In Electrospinning, Jai Abhishekh Veezhinathan

Theses

Electrospinning is an electrohydrodynamic process for the fabrication of nanofibers which are widely used in therapeutical tissue engineering approaches. It utilizes the potential difference of an electrostatic field to overcome the surface tension of the polymer solution to extrude a fine jet of fluid which deposits on the grounded collector as a nanofiber mat. Using this process, nanofibers with diameters less than a micron can be produced.

Previous studies have shown the presence of residual charge in electrospun nanofibers. The presence and decay of residual charge during cell culture media is still unknown. In an attempt to clarify the presence …

Tissue Engineering Scaffold Fabrication And Processing Techniques To Improve Cellular Infiltration, Casey Grey

Theses and Dissertations

Electrospinning is a technique used to generate scaffolds composed of nano- to micron-sized fibers for use in tissue engineering. This technology possesses several key weaknesses that prevent it from adoption into the clinical treatment regime. One major weakness is the lack of porosity exhibited in most electrospun scaffolds, preventing cellular infiltration and thus hosts tissue integration. Another weakness seen in the field is the inability to physically cut electrospun scaffolds in the frontal plane for subsequent microscopic analysis (current electrospun scaffold analysis is limited to sectioning in the cross-sectional plane). Given this it becomes extremely difficult to associate spatial scaffold …

Shelf Life Study Of Electrospun Plga Copolymers, Sean Youra, Nick Hudson

Biomedical Engineering

Poly(lactic-co-glycolic acid) (PLGA) is one of the most commonly used copolymers for electrospinning in tissue engineering applications. However, most research has not focused on the copolymer itself in regards to how long it can be used effectively and if varying the concentrations of polylactic acid (PLA) and polyglycolic acid (PGA) affect the resulting properties. Electrospinning is the method we use to create the three-dimensional constructs, or “scaffolds”, for the blood vessel mimic (BVM) in the tissue engineering lab. The aim of our project was to investigate if the morphology and mechanical properties of the scaffolds changed over time when they …

Fabricating And Characterizing Physical Properties Of Electrospun Polypeptide-Based Nanofibers, Dhan Bahadur Khadka

USF Tampa Graduate Theses and Dissertations

This dissertation has aimed to fabricate polypeptide based biomaterial and characterize physical properties. Electrospinning is used as a tool for the sample fabrication. Project focused on determining the feasibility of electrospinning of certain synthetic polypeptides and certain elastin-like peptides from aqueous feedstocks and to characterize physical properties of polymer aqueous solution, cast film and spun fibers and fiber mats. The research involves peptide design, polymer electrospinning, fibers crosslinking, determining the extent of crosslinking, fibers protease degradation study, fibers stability and self-organization analysis, structure and composition determination by various spectroscopy and microscopy techniques and characterization of mechanical properties of individual suspended …

Integrated Fiber Electrospinning: Creating Spatially Complex Electrospun Scaffolds With Minimal Delamination, Casey Grey

Theses and Dissertations

Tissue engineering scaffolds come in many shapes and sizes, however, due to difficulty manufacturing the microstructure architecture required in tissue engineering, most scaffolds are architecturally non-dynamic in nature. Because the microstructural architecture of all biological tissues is inherently complicated, non-dynamic tissue engineering scaffolds tend to be a poor platform for tissue regeneration. The current method for manufacturing dynamic tissue engineering scaffolds involves electrospinning successive layers of different fibers, an approach that exhibits no fiber transition between layers and subsequent delamination problems. In this study we aim to address the design challenges of tissue engineering scaffolds through our novel integrated fiber …

Preparation And Characterization Of A Self-Crimp Side-By-Side Bicomponent Electrospun Material, Yang Han

Theses and Dissertations

Bicomponent composite fibers have been widely used in the textile industry and are gaining increasing attention on biomedical applications. In this research, polycaprolactone/poly (lactic acid) side-by-side bicomponent fibers were created for the application of a biodegradable scaffold. The side-by-side structure endowed the fiber with self-crimps when it was processed under certain conditions. This material was produced by electrospinning and collected on a high speed rotating mandrel to get highly oriented fibers. A mechanical stretch at the same direction was done followed by a wet heat treatment for polymer retraction. Crimped fibers were demonstrated by scanning electron microscopy. The quantitative porosity …

Design Of Experimentation To Systematically Determine The Interaction Between Electrospinning Variables And To Optimize The Fiber Diameter Of Electrospun Poly (D, L-Lactide-Co-Glycolide) Scaffolds For Tissue Engineered Constructs, Yvette S. Castillo

Master's Theses

Cardiac disease causes approximately a third of the deaths in the United States. Furthermore, most of these deaths are due to a condition termed atherosclerosis, which is a buildup of plaque in the coronary arteries, leading to occlusion of normal blood flow to the cardiac muscle. Among the methods to treat the condition, stents are devices that are used to restore normal blood flow in the atherosclerotic arteries. Before advancement can be made to these devices and changes can be tested in live models, a reliable testing method that mimics the environment of the native blood vessel is needed. Dr. …

Electrospun Polycaprolactone Nanofiber Scaffolds For Tissue Engineering, Andreas Haukas

Graduate Theses and Dissertations

Stem cell and tissue engineering offer us with a unique opportunity to research and develop new therapies for treating various diseases that are otherwise incurable using traditional medicines. However, development of these new therapies replies upon the establishment of in vitro cell culture and differentiation systems that mimic in vivo microenvironments required for cell-cell and cell-ECM interaction. The development of these cell culture systems depends upon the identification of appropriate biomaterials and cell sources. Biomaterials should be carefully selected and fabricated into scaffolds for supporting cell growth and differentiation. In this study, we explored the fabrication of 3D electrospun nanofiber …

Three Dimensional In Vitro Model Of Head And Neck Squamous Cell Carcinoma, Anna Bulysheva

Theses and Dissertations

Head and neck squamous cell carcinomas (HNSCC) are among the leading causes of cancer related deaths throughout the world. The survival rate for this type of cancer is extremely low and has not changed significantly in recent decades. There is an imperative need to study tumor progression in a representative model in order to generate more knowledge about this disease as well as develop more effective treatment options. Multiple methods already exist for studying HNSCC and other types of cancers, including in vitro and in vivo models. Although in vivo models are more representative of the human carcinomas in terms …

A Novel In-House Design Of A Bioreactor For The Modeling Of An In Vitro Blood Brain Barrier Model, Ian Mahaffey

Biomedical Engineering

The blood brain barrier is the protector of the central nervous system and a physical barrier that functions to regulate the substances that can pass in and out of the brain; it is the function and integrity of this system that keeps the homeostasis of the central nervous system. Yet this shield against foreign invaders in the blood also prevents drugs designed for treatment of various ailments of the central nervous system from reaching their target in the brain. Developing drugs that can pass through this barrier, and understanding it’s function has become an area of increasing interest. Many researchers …

Regeneration Of Electrospun Bioresorbable Vascular Grafts: A Phenomenon Associated With Vascular Graft Properties And Macrophage Phenotypes (M1/M2), Koyal Garg

Theses and Dissertations

Macrophages (MФ) and mast cells are important cell types in the context of tissue remodeling and regeneration. Mast cells participate in the early stages of wound healing and modulate the acute inflammatory responses to biomaterials. Mast cells can secrete a myriad of different cytokines by the process of degranulation; the process of regulated secretion in which preformed contents stored in their granules are rapidly released by exocytosis. Some of these cytokines such as IL-4, IL-13 and TNF-α can modulate the MФ phenotype. Macrophages (MΦ) are innate immune cells, crucial for tissue homeostasis, presentation of foreign and self-antigens following infection/injury, pathogen …

Tissue Engineering An Acellular Bioresorbable Vascular Graft To Promote Regeneration, Patricia Wolfe

Theses and Dissertations

Tissue engineering is an interdisciplinary field that aims to restore, maintain, or improve diseased or damaged tissues. Electrospinning has become one of the most popular means to fabricate a scaffold for various tissue engineering applications as the process is extremely versatile and inexpensive. The ability for electrospinning to consistently create nanofibrous structures capable of mimicking the native extracellular matrix (ECM) is the basis behind why this technique is so successful in tissue engineering. Cardiovascular disease has been the leading cause of death in the United States for over 100 years, and because of this, the need for coronary artery replacements …

Robust Cns Regeneration After Complete Spinal Cord Transection Using Aligned Poly-L-Lactic Acid Microfibers, Andres Hurtado, Jared M. Cregg, Han B. Wang, Dane F. Wendell, Martin Oudega, Ryan J. Gilbert, John W. Mcdonald

Chemical and Biochemical Engineering Faculty Research & Creative Works

Following spinal cord injury, axons fail to regenerate without exogenous intervention. In this study we report that aligned microfiber-based grafts foster robust regeneration of vascularized CNS tissue. Film, random, and aligned microfiber-based conduits were grafted into a 3 mm thoracic rat spinal cord gap created by complete transection. Over the course of 4 weeks, microtopography presented by aligned or random poly- l-lactic acid microfibers facilitated infiltration of host tissue, and the initial 3 mm gap was closed by endogenous cell populations. This bulk tissue response was composed of regenerating axons accompanied by morphologically aligned astrocytes. Aligned fibers promoted long distance …

Silk Fibroin-Based Scaffolds For Tissue Engineering Applications, Jennifer Mccool

Theses and Dissertations

This study focused on the comparison of the electrospun silk scaffolds to the electrospun silk fibroin gel scaffolds. Moreover, this study examined the differences in cross-linking effects of genipin and methanol as well as solvents on the mechanical properties and cell compatibility of the scaffolds. Silk scaffolds were electrospun from an aqueous solution or 1,1,1,3,3-hexafluoro-2-propanol (HFIP) without genipin, immediately after 8 % (wt) genipin was added to the solution, and 18 hours after genipin blended with the solution. Uniaxial tensile testing determined that the silk scaffolds electrospun from water exhibit a higher modulus and peak stress than that of the …

A 3-Dimensional Vascularized Cardiac Tri-Culture Model Using Chitosan Nanofiber Scaffolds, Ali Hussain

Dissertations

The development of an in vitro tissue model that can mimic the 3-dimenisonal (3-D) cellular architecture and mosaic of myocardial tissue holds great value for cardiac tissue engineering, modeling, and cardiovascular drug screening applications. The main objective of this project was to develop a 3-D vascularized cardiac tissue model in vitro for improved survival and function.

The cellular mosaic of the myocardial tissue demands the intricate integration of an extracellular matrix-like scaffold, cellular constituents, and biological factors. The first aim of the research was to fabricate and characterize a biodegradable chitosan nanofiber scaffold that would resemble the extracellular matrix (ECM) …

Novel Nanofiber Structures And Advanced Tissue Engineering Applications, Vince Beachley

All Dissertations

Extracellular matrix (ECM) nanofibers such as collagen and elastin make up an important component of natural tissues. These structural components serve to impart mechanical strength and provide locations for cell attachment and biomolecule storage. Cells respond to their structural environment in a wide variety of ways beyond physical support, and it has been demonstrated that this environment directly modulates cell behaviors such as, morphology, differentiation, ECM production, attachment, and migration. ECM nanofibers also play an important role as a template for tissue formation during development, remodeling, and regeneration. Nanofiber based tissue engineering strategies aim to mimic the geometry of the …

An Investigation Of Process Parameters To Optimize The Fiber Diameter Of Electrospun Vascular Scaffolds Through Experimental Design, Steffi Wong

Biomedical Engineering

No abstract provided.

Electrospun Scaffolds For Directed Pancreatic Differentiation Of Human Ips Cells, Karl Sonntag

Biological and Agricultural Engineering Undergraduate Honors Theses

In this work, an electrospinning device for fabricating three-dimensional scaffolds was constructed. The device can be used to produce tissue engineered scaffolds electrospun for directing the differentiation of human induced pluripotent stem (iPS) cells into glucose-responsive, insulin-secreting cells for diabetes treatment. Electrospinning utilizes high electrical charge to generate nanofibers from polymers dissolved in solution. A standard setup for such a device includes a high-voltage power source, a syringe pump, and a grounded collector. The process works by dissolving the polymer in a volatile solvent, and filling a syringe with the polymer/solvent mixture. Next, the syringe is locked into place in …