Biomedical Engineering and Bioengineering Commons^™

Life Support: Long Term Storage Of Solid Waste In An Enclosed Membrane System, Emmy O. Trieu, Michael Flynn, Rocco Mancinelli

STAR Program Research Presentations

In deep space missions, maintaining life support is of the utmost priority. In such a closed system, human waste must be stored and treated. Simulated feces (ersatz) will be inoculated with microbes representing normal fecal flora, mixed with urine brine and shredded refuse of products typically used in space missions. Composting methods often use alternating layers of waste with scraps of carboniferous materials (finely shredded refuse). By preparing membrane bags with a homogenized ersatz and carboniferous refuse mixture and membrane bags with alternating layers of ersatz and carboniferous refuse, it may be possible to monitor anaerobic thermophillic digestion of the …

Finite Element Models Of The Knee & Hip Joints: Using Opensim To Predict Muscle Forces, Kevin S. Jones, Spencer D. Wangerin, Jeffrey D. Pyle, Stephen M. Klisch, Scott J. Hazelwood

STAR Program Research Presentations

Quantitative data of stresses and strains in the cartilage of the knee and hip joints are required to design prostheses and can be used to give accurate advice to patients with cartilage damage as to which activities should be avoided. Instrumented hip implants can only give the overall resultant force in the joint, not the stresses and strains throughout the cartilage. Finite Element (FE) models of the Knee and Hip are being constructed in order to obtain the stresses and strains in articular (of the joint) cartilage. Muscle forces and joint contact forces are required as inputs to these FE …

Interleukin Expression After Injury And The Effects Of Interleukin-1 Receptor Antagonist, Connie S. Chamberlain, Ellen M. Leiferman, Kayt E. Frisch, Stacey L. Brickson, William L. Murphy, Geoffrey S. Baer

Faculty Publications - Biomedical, Mechanical, and Civil Engineering

Ligament and tendon repair involves a complex series of coordinated events orchestrated by various cell types, cytokines and other factors. The repair process extends months to years and results in scar tissue mechanically inferior to native tissue. This is in clear contrast to tissue "regeneration" which would recapitulate the native tissue. Numerous approaches to stimulate a regenerative scenario have been attempted, including tissue-engineering, non-steroidal anti-inflammatories, ultrasonic, or electrical stimulation, but none have resulted in complete regeneration. In pursuit of a more regenerative outcome, it is important to understand the fundamentals of the normal healing process. Previous work from our lab …

Vascular Reactivity Of Immature Arterialized Capillaries, Sara Hellstrom

Biomedical Engineering

Peripheral arterial occlusive disease (PAOD) is a globally prevalent cardiovascular disease in which atherosclerotic plaques narrow arterial lumen diameters and restrict blood flow to down stream tissues. The impact of these occlusions can be mitigated by collateral vessels that connect parallel arterial branches and act as natural bypasses to maintain perfusion. Some patients with PAOD may not have robust collateral networks to accommodate ischemic tissues in the event of an occlusion and, therefore, may be more susceptible to hypoxia and tissue necrosis. In animal models that lack collateral arterioles, capillaries can arterialize and form functional collaterals; however, in the early …

The Effects Of Variation In Collagen D-Spacing On Compact Bone Viscoelasticity: A Finite Element Analysis, Miguel A. Mendoza

Master's Theses

The D-spacing that is characteristic of collagen and its structural arrangement was previously thought to be a constant value. Much research is revealing that it is actually a distribution of values in biological tissues. Recent ovine experimentation has also shown that the D-spacing distribution is significantly altered following estrogen depletion. While ewes contain some major biological differences between their human counterparts, they are an economical and robust large animal model for postmenopausal osteoporosis. So, the exploration of the possible implications that D-spacing has on the mechanical properties of the whole bone utilizing animal models and computational methods is warranted. Six …

Implantable Biosensors For Physiologic Status Monitoring During Hemorrhage, Christian Kotanen

All Dissertations

Trauma diagnostics and management are major aims of research for implantable amperometric enzyme biosensor technology. Biosensors are capable of monitoring metabolic variables in a minimally invasive manner and have great potential to augment current wireless vital sign monitoring technologies in order to make a more robust physiologic status monitoring platform. The dual responsive Electrochemical Cell-on-a-Chip Microdisc Electrode Array (ECC MDEA 5037) is a recently developed electrochemical transducer for use in a wireless, implantable biosensor system for the continuous measurement of interstitial glucose and lactate. Hyperglycemia arising from insulin resistance and hyperlactatemia arising from anaerobic metabolism both occur following trauma and …

Stochastic Reconstruction Of Multiple Source Atmospheric Contaminant Dispersion Events, Derek Wade, Inanc Senocak

Mechanical and Biomedical Engineering Faculty Publications and Presentations

Reconstruction of intentional or accidental release of contaminants into the atmosphere using concentration measurements from a sensor network constitutes an inverse problem. An added complexity arises when the contaminant is released from multiple sources. Determining the correct number of sources is critical because an incorrect estimation could mislead and delay response efforts. We present a Bayesian inference method coupled with a composite ranking system to reconstruct multiple source contaminant release events. Our approach uses a multi-source data-driven Gaussian plume model as the forward model to predict the concentrations at sensor locations. Bayesian inference with Markov chain Monte Carlo (MCMC) sampling …

Design Of A Compliant Underactuated Robotic Finger With Coordinated Stiffness, Etienne Dessauw

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

The concept of underactuation has been previously developed in the robotic field for grasping applications. For these anthropomorphic grippers, the minimization of the number of input signals, or in other words underactuation, is the most expected characteristic. This method has become very popular in recent decades. Indeed, by minimizing the number of input signals, it minimizes the complexity of the system’s control and at the same time avoids increased weight and cost. The inconvenience of such a technique is that the design of this type of system remains a difficult task if the behavior of the underactuated set of joints …

Extraction Of Antioxidants From Animal Blood And Its Potential Application As A Pet Food Preservative, Chengyi Tu

All Theses

Nowadays, more and more people are having pets as members of their family. To the year of 2012, there are 78.2 million dogs and 86.4 million cats owned in the U.S according to the report of the Humane Society of the U.S. The pet food industry as a result has been prosperous, with an estimated market size of $21 billion in the year of 2013. However, there is a common problem for the industry - fat rancidification. Pet foods usually contain relatively high levels of fat, which, if not well protected, are prone to oxidation and generate unfavorable products including …

The Development Of A Rapid Fiber-Based Immunoassay As A Point-Of-Care Or In-Home Diagnostic Test, Christopher Waddell

All Theses

Early diagnosis of conditions allows for physicians to treat patients earlier, and ultimately improve patient outcomes. Two conditions of particular interest for earlier and cheaper diagnosis are the influenza virus and human immunodeficiency virus (HIV). Antiviral treatment administered within the first 48 hours of influenza infection decreases symptom severity, risk of complications, and reduced healthcare costs. Early diagnosis of HIV can decrease the risk of transmission of the virus to HIV negative individuals and allow for earlier administration of highly active antiretroviral treatment (HAART), improving patient quality of life and patient outcomes.
Currently, the 'gold standard' for detection of both …

Problems In The Study And Use Of Ac Dielectrophoresis And Their Consequences: A Study Based On Comsol Multiphysics Modeling, Vandana Devi Pandian Babu

All Theses

Dielectrophoresis (or DEP) is an important phenomenon which is induced when a dielectric particle is placed in a non-uniform electric field. The force generated by DEP has been exploited for various micro and nano fluidics applications like positioning, sorting and separation of particles involved in medical diagnostics, drug discovery, cell therapeutics, biosensors, microfluidics, nanoassembly, particle filtration etc. The integration of DEP systems into the microfluidics enables inexpensive, fast, highly sensitive, highly selective, label-free detection and also the analysis of target bioparticles.

This work aims to provide a complete compilation of the factors affecting the DEP force. It elucidates the underlying …

Experimental Development And Analysis Of A Novel Setup For Insulated Dielectrophoresis, Johnie Hodge

All Theses

Dielectrophoresis has long been studied and utilized for the manipulation of microscale particles in solution. This phenomenon is due to the induced polarization of dielectric particles subjected to an electric field. When the field is also inhomogeneous in terms of the distribution of its strength through space, the polarized particles move and come to rest in certain areas due to the relationship between their and the solvent's relative permittivities. If the electric field is homogenous, such as within a parallel plate capacitor, the particles are polarized according to their permittivity and the field's frequency, but they will not move.
These …

Multimodal Wearable Sensors For Human-Machine Interfaces, Mark Nolan

Doctoral

Certain areas of the body, such as the hands, eyes and organs of speech production, provide high-bandwidth information channels from the conscious mind to the outside world. The objective of this research was to develop an innovative wearable sensor device that records signals from these areas more conveniently than has previously been possible, so that they can be harnessed for communication. A novel bioelectrical and biomechanical sensing device, the wearable endogenous biosignal sensor (WEBS), was developed and tested in various communication and clinical measurement applications.

One ground-breaking feature of the WEBS system is that it digitises biopotentials almost …

Finite Element Analysis And Validation Of Hip Joints With The Main Types Of Femoroacetabular Impingement, Kevin Lucas Mitchell

Master's Theses

Current research suggests that femoroacetabular impingement can be a cause of osteoarthritis. Femoroacetabular impingement is a condition that can affect both the femur and the pelvis of an individual. Femoroacetabular impingement can cause damage to the hip joint and its surrounding tissues. The articular cartilage and the labrum are both affected by this condition. A cam impingement is where a bony protrusion develops at the femoral head/neck junction. A pincer impingement is where a bony protrusion develops at the acetabular rim. Often, patients are seen with a combination of both impingements. The main goal of this study was to computationally …

Optimization Problem Formulation For Predicting Knee Muscle And Contact Forces During Gait, Gil Serrancolí, Jonathan P. Walter, Allison Kinney, Benjamin J. Fregly, Josep M. Font-Llagunes

Mechanical and Aerospace Engineering Faculty Publications

The human body has more muscles than degrees of freedom (DOF), which leads to indeterminacy in the muscle force calculation. In this study, an optimization problem to estimate the lower-limb muscle forces during a gait cycle of a patient wearing an instrumented knee prosthesis is formulated. It consists of simulating muscle excitations in a physiological way while muscle parameters are calibrated.

A Lateral Flow Smart Phone Image Analysis Diagnostic, Christina Holly Tyrrell

Master's Theses

A low cost compact diagnostic has many implications in today’s society. Smart phone technology has exponentially grown and with it the imaging capabilities associated with smart phones. The goals of this research are i) to determine the feasibility of combining in the field smart phone images with color dependent assay results, ii) to develop a MatLab® image analysis code to analyze these results, and iii) compare limits of detection between the un-aided eye and MatLab® image analysis software.

Orange G dye is used to create a stock solution and subsequent titers for analysis. Autocad is used to design an assay …

Biofabrication Of Scaffolds For Intervertebral Disc (Ivd) Tissue Regeneration, Benjamin Whatley

All Dissertations

The ultimate goal of tissue regeneration is to replace damaged or diseased tissue with a cell-based or biomaterial-based tissue that accurately mimics the functionality, biology, mechanics, and cellular and extracellular matrix (ECM) composition of the native tissue. Specifically, the ability to control the architecture of tissue engineered constructs plays a vital role in all of these issues as scaffold architecture has an affect on function, biomechanics, and cellular behavior. Many tissue engineered scaffolds focus on the ability to mimic natural tissue by simulating the ECM due to the fact that in each distinct tissue, the ECM serves as a structural …

Feeling For Failure: Haptic Force Perception Of Soft Tissue Constraints In A Simulated Minimally Invasive Surgery Task, Lindsay Long

All Dissertations

In minimally invasive surgery (MIS), the ability to accurately interpret haptic information and apply appropriate force magnitudes onto soft tissue is critical for minimizing bodily trauma. Force perception in MIS is a dynamic process in which the surgeon's administration of force onto tissue results in useful perceptual information which guides further haptic interaction and it is hypothesized that the compliant nature of soft tissue during force application provides biomechanical information denoting tissue failure. Specifically, the perceptual relationship between applied force and material deformation rate specifies the distance remaining until structural capacity will fail, or indicates Distance-to-Break (DTB). Two experiments explored …

Ion Channel-Mediated Hydrostatic Pressure Mechanotransduction In Urothelial Cells, Kevin Champaigne

All Dissertations

A majority of men and women aged 40 and over experience lower urinary tract symptoms, including urgency, incontinence, and frequency, which often affect the individual's quality of life. Although often considered a simple structure, the bladder is a complex system with sophisticated sensory and motor feedback mechanisms that allow for the sensation of fullness and pain, reflexive responses to bladder filling, and conscious control over the time and place of micturition. Although disruptions of these sensory mechanisms are believed to cause certain lower urinary tract dysfunctions, the specific mechanisms involved in sensing bladder fullness, distension, tension, or pressure at the …

Polysaccharide-Based Nanocarriers For Improved Drug Delivery, Nan Zhang

Dissertations - ALL

The field of drug delivery has provided a solution to the limited efficacy and high toxicity of many drugs. Nano-sized drug carriers are popular because their size allows for selective accumulation in the diseased area. Polysaccharides are non-toxic and biodegradable natural polymers that can serve as the basis for these nano-sized carriers. Polysialic acid (PSA) is such a polysaccharide with strong hydrophilicity that may reduce uptake by the reticuloendothelial system and prolong drug circulation. In this study, we developed PSA-based nanocarriers, specifically micelles and nanoparticles, for improved drug delivery with improved efficacy and minimized toxicity. PSA-based micelle systems were developed …

A Novel Hybrid Hydrogel For Scaffold-Mediated Gene Delivery, Jeremy Zhang

All Dissertations

Scaffold-mediated nonviral gene delivery avoids several drawbacks of systemic injection such as clearance by the reticulo-endothelial system and serum aggregation. Existing synthetic and natural polymers used in gene delivery scaffolds are primarily derived from other tissue engineering applications with design parameters focused on the physicochemical properties of the scaffold and its biocompatibility. Common synthetic materials used in polymeric scaffolds such as PEG are practically bio-inert with minimal cell and protein interaction. Therefore, an opportunity exists for the rational design novel gene delivery scaffolds with components capable of increasing the expression of incorporated transgene by including scaffold components that interact with …

Spatial Control Of Magnetic Nanoparticles Integrated With Cellular Spheroids As Tissue Engineered Building Blocks, Brandon Mattix

All Dissertations

Magnetic nanoparticles (MNPs) have been investigated in tissue engineering applications to provide in situ imaging, drug delivery, and tissue patterning, but direct and prolonged interaction between cells and MNPs can have adverse effects on cell function. Therefore, methods which reduce or limit the interaction of MNPs with cells, or utilize more biocompatible MNP-based strategies will improve upon the commonly used iron oxide MNPs. We investigated a variety of methods to improve upon the use of MNPS in tissue engineering.
Cell aggregates, or spheroids, have been used as tissue engineered building blocks that can closely mimic the native three-dimensional in vivo …

Evaluation Of Cast Creep Occurring During Simulated Clubfoot Correction, Tamara L. Cohen, Haluk Altiok, Mei Wang, Linda M. Mcgrady, Joseph Krzak, Adam Graf, Sergey Tarima, Peter A. Smith, Gerald F. Harris

Biomedical Engineering Faculty Research and Publications

The Ponseti method is a widely accepted and highly successful conservative treatment of pediatric clubfoot involving weekly manipulations and cast applications. Qualitative assessments have indicated the potential success of the technique with cast materials other than standard plaster of Paris. However, guidelines for clubfoot correction based on the mechanical response of these materials have yet to be investigated. The current study sought to characterize and compare the ability of three standard cast materials to maintain the Ponseti-corrected foot position by evaluating cast creep response. A dynamic cast testing device, built to model clubfoot correction, was wrapped in plaster of Paris, …

Young’S Modulus And Volume Porosity Relationships For Additive Manufacturing Applications, John Anthony Choren, Stephen M. Heinrich, M. Barbara Silver-Thorn

Civil and Environmental Engineering Faculty Research and Publications

Recent advancements in additive manufacturing (or rapid prototyping) technologies allow the fabrication of end-use components with defined porous structures. For example, one area of particular interest is the potential to modify the flexibility (bending stiffness) of orthopedic implants through the use of engineered porosity (i.e., design and placement of pores) and subsequent fabrication of the implant using additive manufacturing processes. However, applications of engineered porosity require the ability to accurately predict mechanical properties from knowledge or characterization of the pore structure and the existence of robust equations characterizing the property–porosity relationships. As Young’s modulus can be altered by variations in …

Computational Biomechanical Modeling Of The Human Knee During Kneeling, Tariq R. Abo-Alhol

Electronic Theses and Dissertations

Total knee replacement benefits patients who suffer from severe knee pain or joint stiffness and other joint related illnesses that limit everyday activities. There has been an increase in the number of procedures performed each year and a need to evaluate the performance of these implants during specialized activities such as kneeling. Most computational studies lack insight into inter-patient variability and the results do not apply to large population. This study developed: (1) three-dimensional explicit finite element (FE) models to investigate natural and implanted knee joint kinematics and bone strain and (2) a platform to enable population-based evaluation by combining …

Interleukin Expression After Injury And The Effects Of Interleukin-1 Receptor Antagonist, Connie S. Chamberlain, Ellen M. Leiferman, Kayt E. Frisch, Stacey L. Brickson, William L. Murphy, Geoffrey S. Baer, Ray Vanderby

Faculty Work Comprehensive List

Ligament healing follows a series of complex coordinated events involving various cell types, cytokines, as well as other factors, producing a mechanically inferior tissue more scar-like than native tissue. Macrophages provide an ongoing source of cytokines to modulate inflammatory cell adhesion and migration as well as fibroblast proliferation. Studying interleukins inherent to ligament healing during peak macrophage activation and angiogenesis may elucidate inflammatory mediators involved in subsequent scar formation. Herein, we used a rat healing model assayed after surgical transection of their medial collateral ligaments (MCLs). On days 3 and 7 post-injury, ligaments were collected and used for microarray analysis. …

Hybrid Nanostructured Textile Bioelectrode For Unobtrusive Health Monitoring, Pratyush Rai

Graduate Theses and Dissertations

Coronary heart disease, cardiovascular diseases and strokes are the leading causes of mortality in United States of America. Timely point-of-care health diagnostics and therapeutics for person suffering from these diseases can save thousands of lives. However, lack of accessible minimally intrusive health monitoring systems makes timely diagnosis difficult and sometimes impossible. To remedy this problem, a textile based nano-bio-sensor was developed and evaluated in this research. The sensor was made of novel array of vertically standing nanostructures that are conductive nano-fibers projecting from a conductive fabric. These sensor electrodes were tested for the quality of electrical contact that they made …

Young's Modulus And Volume Porosity Relationships For Additive Manufacturing Applications, Stephen M. Heinrich, M. Barbara Silver-Thorn, John Anthony Choren

Biomedical Engineering Faculty Research and Publications

Recent advancements in additive manufacturing (or rapid prototyping) technologies allow the fabrication of end-use components with defined porous structures. For example, one area of particular interest is the potential to modify the flexibility (bending stiffness) of orthopedic implants through the use of engineered porosity (i.e., design and placement of pores) and subsequent fabrication of the implant using additive manufacturing processes. However, applications of engineered porosity require the ability to accurately predict mechanical properties from knowledge or characterization of the pore structure and the existence of robust equations characterizing the property–porosity relationships. As Young’s modulus can be altered by variations in …

Reducing Radiation Dose To The Female Breast During Ct Coronary Angiography: A Simulation Study Comparing Breast Shielding, Angular Tube Current Modulation, Reduced Kv, And Partial Angle Protocols Using An Unknown-Location Signal-Detectability Metric, Franco Rupcich, Andreu Badal, Lucretiu M. Popescu, Iacovos Kyprianou, Taly Gilat Schmidt

Biomedical Engineering Faculty Research and Publications

Purpose:

The authors compared the performance of five protocols intended to reduce dose to the breast during computed tomography (CT) coronary angiography scans using a model observer unknown-location signal-detectability metric.

Methods:

The authors simulated CT images of an anthropomorphic female thorax phantom for a 120 kV reference protocol and five “dose reduction” protocols intended to reduce dose to the breast: 120 kV partial angle (posteriorly centered), 120 kV tube-current modulated (TCM), 120 kV with shielded breasts, 80 kV, and 80 kV partial angle (posteriorly centered). Two image quality tasks were investigated: the detection and localization of 4-mm, 3.25 mg/ml and …

In Vivo Imaging Of Human Retinal Microvasculature Using Adaptive Optics Scanning Light Ophthalmoscope Fluorescein Angiography, Alexander Pinhas, Michael Dubow, Nishit Shah, Toco Y.P. Chui, Drew Scoles, Yusufu N. Sulai, Rishard Weitz, Joseph B. Walsh, Joseph Carroll, Alfredo Dubra, Richard B. Rosen

Biomedical Engineering Faculty Research and Publications

The adaptive optics scanning light ophthalmoscope (AOSLO) allows visualization of microscopic structures of the human retina in vivo. In this work, we demonstrate its application in combination with oral and intravenous (IV) fluorescein angiography (FA) to the in vivo visualization of the human retinal microvasculature. Ten healthy subjects ages 20 to 38 years were imaged using oral (7 and/or 20 mg/kg) and/or IV (500 mg) fluorescein. In agreement with current literature, there were no adverse effects among the patients receiving oral fluorescein while one patient receiving IV fluorescein experienced some nausea and heaving. We determined that all retinal capillary …