Biomedical Engineering and Bioengineering Commons^™

Degradable Borate Glass Polyalkenoate Cements, L. Shen, A. Coughlan, Mark R. Towler, M. Hall

Chemical and Biochemical Engineering Faculty Research & Creative Works

Glass polyalkenoate cements (GPCs) containing aluminum-free borate glasses having the general composition Ag₂O-Na₂O-CaO-SrO-ZnO- TiO₂-B₂O₃ were evaluated in this work. An initial screening study of sixteen compositions was used to identify regions of glass formation and cement compositions with promising rheological properties. The results of the screening study were used to develop four model borate glass compositions for further study. A second round of rheological experiments was used to identify a preferred GPC formulation for each model glass composition. The model borate glasses containing higher levels of TiO₂ (7.5 mol %) …

Cervical Cancer Histology Image Feature Extraction And Classification, Peng Guo

Masters Theses

"Cervical cancer, the second most common cancer affecting women worldwide and the most common in developing countries can be cured if detected early and treated. Expert pathologists routinely visually examine histology slides for cervix tissue abnormality assessment. In previous research, an automated, localized, fusion-based approach was investigated for classifying squamous epithelium into Normal, CIN1, CIN2, and CIN3 grades of cervical intraepithelial neoplasia (CIN) based on image analysis of 62 digitized histology images obtained through the National Library of Medicine. In this research, CIN grade assessments from two pathologists are analyzed and are used to facilitate atypical cell concentration feature development …

Inorganic Biodegradable Devices For Temporary Implants, Kassan Unda

Masters Theses

"Implantable electronic devices have great potential to benefit many health care technologies. They comprise of two different categories. The first is permanent prosthetic devices like cardiac pacemakers or nerve stimulants. The other category includes temporary devices for interventional medical monitoring and control scenarios, which lose functionality and become unnecessary after their intended operational lifetime. This can cause serious electromagnetic and biomechanical safety concerns if not removed from the body by an additional surgical operation.

This thesis focuses on exploring the feasibility of implantable inorganic bioresorbable thin film resistive devices utilizing bioactive glass as the core structural material. This device will …

Investigating The Effect Of Sio2-Tio2-Cao-Na 2o-Zno Bioactive Glass Doped Hydroxyapatite: Characterisation And Structural Evaluation, Chokchai Yatongchai, Anthony W. Wren, Declan J. Curran, Stuart Hampshire, Mark R. Towler

Chemical and Biochemical Engineering Faculty Research & Creative Works

The effects of increasing bioactive glass additions,

SiO₂-TiO₂-CaO-Na₂O-ZnO up to 25 wt% in increments of 5 wt%, on the physical and mechanical properties of hydroxyapatite (HA) sintered at 900, 1000, 1100 and 1200°C for 2 h was investigated. Increasing both the glass content and the temperature resulted in increased HA decomposition. This resulted in the formation of a number of bioactive phases. However the presence of the liquidus glass phase did not result in increased densification levels. At 1000 and 1100°C the additions of 5 wt% glass resulted in a decrease in density which …

A Protocol For Rheological Characterization Of Hydrogels For Tissue Engineering Strategies, Jonathan M. Zuidema, Christopher J. Rivet, Ryan J. Gilbert, Faith A. Morrison

Chemical and Biochemical Engineering Faculty Research & Creative Works

Hydrogels are studied extensively for many tissue engineering applications, and their mechanical properties influence both cellular and tissue compatibility. However, it is difficult to compare the mechanical properties of hydrogels between studies due to a lack of continuity between rheological protocols. This study outlines a straightforward protocol to accurately determine hydrogel equilibrium modulus and gelation time using a series of rheological tests. These protocols are applied to several hydrogel systems used within tissue engineering applications: agarose, collagen, fibrin, Matrigel™, and methylcellulose. The protocol is outlined in four steps: (1) Time sweeps to determine the gelation time of the hydrogel. (2) …

Effect Of Magnetic Nanoparticle Heating On Cortical Neuron Viability, Christopher J. Rivet, Yuan Yuan, Ryan J. Gilbert, Diana Andra Borca-Tasciuc

Chemical and Biochemical Engineering Faculty Research & Creative Works

Purpose: Superparamagnetic iron oxide nanoparticles are currently approved for use as an adjunctive treatment to glioblastoma multiforme radiotherapy. Radio frequency stimulation of the nanoparticles generates localized hyperthermia, which sensitizes the tumor to the effects of radiotherapy. Clinical trials reported thus far are promising, with an increase in patient survival rate; however, what are left unaddressed are the implications of this technology on the surrounding healthy tissue. Methods and materials: Amino silane-coated iron oxide nanoparticles suspended in culture medium were applied to chick embryonic cortical neuron cultures. Cultures were heated to 37 °C or 45 °C by an induction coil system …

3d Conductive Nanocomposite Scaffold For Bone Tissue Engineering, Aref Shahini, Mostafa Yazdimamaghani, Kenneth J. Walker, Margaret A. Eastman, Hamed Hatami-Marbini, Brenda J. Smith, John L. Ricci, Sundar V. Madihally, Daryoosh Vashaee, Lobat Tayebi

Chemical and Biochemical Engineering Faculty Research & Creative Works

Bone healing can be significantly expedited by applying electrical stimuli in the injured region. Therefore, a three-dimensional (3D) ceramic conductive tissue engineering scaffold for large bone defects that can locally deliver the electrical stimuli is highly desired. In the present study, 3D conductive scaffolds were prepared by employing a biocompatible conductive polymer, ie, poly(3,4-ethylenedioxythiophene) poly (4-styrene sulfonate) (PEDOT:PSS), in the optimized nanocomposite of gelatin and bioactive glass. For in vitro analysis, adult human mesenchymal stem cells were seeded in the scaffolds. Material characterizations using hydrogen-1 nuclear magnetic resonance, in vitro degradation, as well as thermal and mechanical analysis showed that …

Characteristics Of Glass Ionomer Cements Composed Of Glass Powders In Cao-Sro-Zno-Sio2 System Prepared By Two Different Synthetic Routes, Ill Yong Kim, Chikara Ohtsuki, Aisling Coughlan, Lana Placek, Anthony W. Wren, Mark R. Towler

Chemical and Biochemical Engineering Faculty Research & Creative Works

Glass ionomer cements (GICs) are composed of an acid degradable glass, polyacrylic acid and water. Sol-gel processing to prepare the glass phase has certain advantages, such as the ability to employ lower synthesis temperatures than melt quenching and glasses that are reported to have higher purity. A previous study reported the effects of glass synthesis route on GIC fabrication. However, in that study, the sol-gel derived glass exhibited a reduced concentration of cations. This study investigates increasing the cation content of a sol-gel derived glass, 12CaO·4SrO·36ZnO·48SiO₂ (molar ratio) by heating before aging to reduce dissolution of cations. This glass …

Relating Ph And Ion Release From Ga2o3-Na 2o-Cao-Zno-Sio2 Bioactive Glasses, T. J. Keenan, A. W. Wren, A. Coughlan, Mark R. Towler, M. M. Hall

Chemical and Biochemical Engineering Faculty Research & Creative Works

Three glasses were designed for this study, including one Ga-free glass (Control), and two Ga-containing glasses (TGa-1, TGa-2). In the Ga-containing glasses, Ga₂O₃ is included at the expense of ZnO. This study focuses on the relation between pH and ion concentration present in solution in which these bioactive glasses have been submerged for periods of 1, 7, and 14 days. © 2013 IEEE.

Biocompatibility Of Cao-Na2o-Sio2/Tio2 Glass Ceramic Scaffolds For Orthopaedic Applications, A. W. Wren, A. Coughlan, K. E. Smale, S. T. Misture, B. P. Mahon, O. M. Clarkin, Mark R. Towler

Chemical and Biochemical Engineering Faculty Research & Creative Works

This work aims to determine the effect of substituting TiO₂ for SiO₂ in a 0.62SiO₂-Na₂O-0.24CaO based glass-ceramic scaffold. High temperature X-ray Diffraction (HT-XRD) was used to determine the sintering temperature (700oC). Both optical microscopy and x-ray micotomography was used to determine the average pore size (540-680ìm) of each scaffold. Cytocompatibility of each scaffold was conducted using murine mesenchymal stem cells. © 2013 IEEE.

An Investigation Into The Structure And Properties Of Cao-Zno-Sio 2-Tio2-Na2o Bioactive Glass/Hydroxyapatite Composite, Chokchai Yatongchai, Mark R. Towler, Anthony W. Wren

Chemical and Biochemical Engineering Faculty Research & Creative Works

Effect of the addition of CaO-ZnO-SiO₂-TiO₂-Na₂O glass as a reinforcing phase on properties of hydroxyapatite/glass composites was investigated. The addition of the glass caused the decomposition of HA phase to tricalcium phosphate, inhibiting densification in the HA/glass composites. However, depending on the glass concentration, some of the glass can act as a sintering aid enhancing the densification in the composites. © 2013 IEEE.

Gallium Containing Glass Polyalkenoate Bone Cements: Ion Release And E. Coli Inhibition, L. Placek, A. W. Wren, A. Coughlan, Mark R. Towler

Chemical and Biochemical Engineering Faculty Research & Creative Works

The Glass Polyalkenoate Cement (GPC) series (LCon., LGa-1 and LGa-2) containing gallium (Ga) and a 50 wt% addition of E11 polyacrylic acid (PAA), previously developed, was evaluated for ion release, specifically Si, Ca, Zn and Ga, and E. coli inhibition. The maximum inhibition was observed in the t = 0 samples and was 0.35 mm for LCon. and 0.65 mm for LGa-1 and LGa-2. © 2013 IEEE.

Engineered Nanotopography On Electrospun Plla Microfibers Modifies Raw 264.7 Cell Response, Nicholas J. Schaub, Tara Britton, Rupak Rajachar, Ryan J. Gilbert

Chemical and Biochemical Engineering Faculty Research & Creative Works

In this study, we created a new method of electrospinning capable of controlling the surface structure of individual fibers (fiber nano topography). The nano topographical features were created by a phase separation in the fibers as they formed. To control the phase separation, a nonsolvent (a chemical insoluble with the polymer) was added to an electrospinning solution containing poly-l-lactic acid (PLLA) and chloroform. The nano topography of electro spun fibers in the PLLA/chloroform solution was smooth. However, adding a small weight (< 2% of total solution) of a single nonsolvent (water, ethanol, or dimethyl sulfoxide) generated nanoscale depressions on the surface of the fibers unique to the nonsolvent added. Additionally, nanoscale depressions on electro spun fibers were observed to change with dimethyl sulfoxide (DMSO) concentration in the PLLA/chloroform solution. A nonlinear relationship was found between the concentration of DMSO and the number and size of nano topographical features. The surface depressions did not alter the hydrophobicity of the scaffold or degradation of the scaffold over a two-day period. To determine if fiber nano topography altered cell behavior, macrophages (RAW 264.7 cells) were cultured on fibers with a smooth nano topography or fibers with nanoscale depressions. RAW 264.7 cells spread less on fibers with nanoscale depressions than fibers with a smooth topography (p < 0.05), but there were no differences between groups with regard to cell metabolism or the number of adherent cells. The results of this study demonstrate the necessity to consider the nano topography of individual fibers as these features may affect cellular behavior. More importantly, we demonstrate a versatile method of controlling electro spun fiber nano topography. © 2013 American Chemical Society.

Synthesis And Characterization Of Encapsulated Nanosilica Particles With An Acrylic Copolymer By In Situ Emulsion Polymerization Using Thermoresponsive Nonionic Surfactant, Mostafa Yazdimamaghani, Tannaz Pourvala, Elaheh Motamedi, Babak Fathi, Daryoosh Vashaee, Lobat Tayebi

Chemical and Biochemical Engineering Faculty Research & Creative Works

Nanocomposites of encapsulated silica nanoparticles were prepared by in situ emulsion polymerization of acrylate monomers. The synthesized material showed good uniformity and dispersion of the inorganic components in the base polymer, which enhances the properties of the nanocomposite material. A nonionic surfactant with lower critical solution temperature (LCST) was used to encapsulate the silica nanoparticles in the acrylic copolymer matrix. This in situ method combined the surface modification and the encapsulation in a single pot, which greatly simplified the process compared with other conventional methods requiring separate processing steps. The morphology of the encapsulated nano silica particles was investigated by …

Comparison Of A Sio2-Cao-Zno-Sro Glass Polyalkenoate Cement To Commercial Dental Materials: Ion Release, Biocompatibility And Antibacterial Properties, A. W. Wren, A. Coughlan, M. M. Hall, M. J. German, Mark R. Towler

Chemical and Biochemical Engineering Faculty Research & Creative Works

Ion Release and biocompatibility of a CaO-SrO-ZnO-SiO₂ (BT 101) based glass polyalkenoate cement (GPC) was compared against commercial GPCs, Fuji IX and Ketac Molar. The radiopacity (R) was similar for each material, 2.0-2.8. Ion release was evaluated on each material over 1, 7, 30 and 90 days. BT 101 release included Ca (23 mg/L), Sr (23 mg/L) Zn (13 mg/L), Si (203 mg/L). Fuji IX release includes Ca (0.7 mg/L), Al (3 mg/L) Si (26 mg/L), Na (60 mg/L) and P (0.5 mg/L) while Ketac Molar release includes Ca (1 mg/L), Al (0.6 mg/L) Si (23 mg/L), Na (76 …

Automated Methods To Determine Electrospun Fiber Alignment And Diameter Using The Radon Transform, Nicholas J. Schaub, Sean J. Kirkpatrick, Ryan J. Gilbert

Chemical and Biochemical Engineering Faculty Research & Creative Works

Recent evidence demonstrates the ability to change cell function by altering the physical properties of electro spun scaffolds, but many studies still do not characterize electro spun fiber alignment and diameter. To aid in the reporting of these crucial properties, we demonstrate two methods of quantifying electro spun fiber alignment with one method capable of determining electro spun fiber diameter. The first method assesses fiber alignment in a scanning electron microscopy image using the Radon Transform (RT) to calculate the entropy of the fibers in the image. The RT entropy method was more sensitive than a commonly used Fast Fourier …

Characterisation Of Ga2o3-Na2o-Cao-Zno- Sio2 Bioactive Glasses, A. W. Wren, T. Keenan, A. Coughlan, F. R. Laffir, D. Boyd, Mark R. Towler, M. M. Hall

Chemical and Biochemical Engineering Faculty Research & Creative Works

The structural role of Gallium (Ga) is investigated when substituted for Zinc (Zn) in a 0.42SiO₂-0.40-xZnO-0.10Na₂O-0.08CaO glass series, (where x = 0.08). Each starting material was amorphous, and the network connectivity (NC) was calculated assuming Ga acts as both a network modifier (1.23), and also as a network former. Assuming a network forming role for Ga the NC increased with increasing Ga concentration throughout the glass series (Control 1.23, TGa-1 2.32 and TGa-2 3.00). X-ray photoelectron spectroscopy confirmed both composition and correlated NC predictions. Raman spectroscopy was employed to investigate Q-structure and found that a shift …

Multilayer Bioactive Glass/Zirconium Titanate Thin Films In Bone Tissue Engineering And Regenerative Dentistry, Masoud Mozafari, Erfan Salahinejad, Vahid Shabafrooz, Mostafa Yazdimamaghani, Daryoosh Vashaee, Lobat Tayebi

Chemical and Biochemical Engineering Faculty Research & Creative Works

Surface modification, particularly coatings deposition, is beneficial to tissue-engineering applications. In this work, bioactive glass/zirconium titanate composite thin films were prepared by a sol-gel spin-coating method. The surface features of the coatings were studied by scanning electron microscopy, atomic force microscopy, and spectroscopic reflection analyses. The results show that uniform and sound multilayer thin films were successfully prepared through the optimization of the process variables and the application of carboxymethyl cellulose as a dispersing agent. Also, it was found that the thickness and roughness of the multilayer coatings increase nonlinearly with increasing the number of the layers. This new class …

Aluminium-Free Glass Polyalkenoate Cements: Ion Release And In Vitro Antibacterial Efficacy, A. W. Wren, J. P. Hansen, S. Hayakawa, Mark R. Towler

Chemical and Biochemical Engineering Faculty Research & Creative Works

Glass polyalkenoate cements (GPCs) have exhibited potential as bone cements. This study investigates the effect of substituting TiO₂ for SiO₂ in the glass phase and the subsequent effect on cement rheology, mechanical properties, ion release and antibacterial properties. Glass characterization revealed a reduction in glass transition temperature (T_g) from 685 to 669 C with the addition of 6 mol % TiO₂ (AT-2). Magic angle spinning nuclear magnetic resonance (MAS-NMR) revealed a shift from -81 ppm to -76pmm when comparing a Control glass to AT-2, indicating de-polymerization of the Si network. The incorporation of TiO_{2 …}

Comparison Of A Sio2-Cao-Zno-Sro Glass Polyalkenoate Cement To Commercial Dental Materials: Glass Structure And Physical Properties, A. W. Wren, A. Coughlan, F. R. Laffir, Mark R. Towler

Chemical and Biochemical Engineering Faculty Research & Creative Works

Glass polyalkenoate cements (GPCs) have previously been considered for orthopedic applications. A Zn-GPC (BT 101) was compared to commercial GPCs (Fuji IX and Ketac Molar) which have a setting chemistry analogous to BT 101. Handling properties (working, T_w and setting, T_s times) for BT 101 were shorter than the commercial GPCs. BT 101 also had a higher setting exotherm (S_x - 34 °C) than the commercial GPCs (29 °C). The maximum strengths for BT 101, Fuji IX, and Ketac Molar were 75, 238, and 216 MPa (compressive, σ_c), and 34, 54, and 62 MPa (biaxial …

Significance And Analysis Of Milia-Like Cysts In Dermoscopy Skin Lesion Images, Sneha K. Mahajan

Masters Theses

“Milia-like cysts (MLCs) are dermoscopic structures frequently observed in seborrheic keratoses(SKs), which are the most common type of skin lesions. Diverse appearances of these skin lesions make them difficult to differentiate from melanoma, a deadly type of skin cancer. Classified by size into two main groups, starry MLCs and cloudy MLCs, the presence of these structures in a skin lesion has been known to help differentiate benign lesions from melanoma. Though the presence of cloudy MLCs is not exclusively associated with SKs, they can be a useful tool to differentiate SKs from melanoma. This research study determines the statistical occurrence …

Automatic Detection Of Polypoid Skin Lesions: The Squash Sign, Saurabh G. Karnik

Masters Theses

“Earlier detection of malignant melanoma can save lives. Automatic in-vivo methods of melanoma detection including smart-phone applications are now available, but specificity is low, i.e. too many benign lesions are detected as possible melanomas. Polypoids, elevated and rounded lesions are one class of benign lesions. These raised lesions with piecewise circular borders, predominantly intradermal nevi and cutaneous polyps (IDNs), are always benign. Variegated coloring present in polypoid lesions can lead physicians to perform an unneeded biopsy. Contact dermatoscope plates with gel squash these lesions, leaving a “squash sign” marker of benignancy which can be automatically detected. We present a method …

Fabrication Of Cao-Nao-Sio2/Tio2 Scaffolds For Surgical Applications, A. W. Wren, A. Coughlan, K. E. Smale, S. T. Misture, B. P. Mahon, O. M. Clarkin, Mark R. Towler

Chemical and Biochemical Engineering Faculty Research & Creative Works

A series of titanium (Ti) based glasses were formulated (0.62 SiO₂-0.14 Na₂O-0.24 CaO, with 0.05 mol% TiO₂ substitutions for SiO₂) to develop glass/ceramic scaffolds for bone augmentation. Glasses were initially characterised using X-ray diffraction (XRD) and particle size analysis, where the starting materials were amorphous with 4.5 μm particles. Hot stage microscopy and high temperature XRD were used to determine the sintering temperature (̃700 °C) and any crystalline phases present in this region (Na₂Ca₃Si₆O₁₆, combeite and quartz). Hardness testing revealed that the Ti-free control (ScC- …

Developing Novel Prognostic Biomarkers For Multivariate Fracture Risk Prediction Algorithms, Ernest K. Poku, Mark R. Towler, Niamh M. Cummins, Jeff D. Newman

Chemical and Biochemical Engineering Faculty Research & Creative Works

Multivariate prediction algorithms such as FRAX® and QFracture Scores provide an opportunity for new prognostic biomarkers to be developed and incorporated, potentially leading to better fracture prediction. As more research is conducted into these novel biomarkers, a number of factors need to be considered for their successful development for inclusion in these algorithms. In this review, we describe two well-known multivariate prediction algorithms for osteoporosis fracture risk applicable to the UK population, FRAX and QFracture Scores, and comment on the current prognostic tools available for fracture risk; dual X-ray assessment, quantitative ultrasonography, and genomic/biochemical markers. We also highlight the factors …

Mineralization Potential Of Electrospun Pdo-Hydroxyapatite-Fibrinogen Blended Scaffolds, Isaac A. Rodriguez, Parthasarathy A. Madurantakam, Jennifer M. Mccool, Scott A. Sell, Hu Yang, Peter C. Moon, Gary L. Bowlin

Chemical and Biochemical Engineering Faculty Research & Creative Works

The current bone autograft procedure for cleft palate repair presents several disadvantages such as limited availability, additional invasive surgery, and donor site morbidity. The present preliminary study evaluates the mineralization potential of electrospun polydioxanone:nano-hydroxyapatite: fibrinogen (PDO: nHA: Fg) blended scaffolds in different simulated body fluids (SBF). Scaffolds were fabricated by blending PDO: nHA: Fg in the following percent by weight ratios: 100: 0: 0, 50: 25: 25, 50: 50: 0, 50: 0: 50, 0: 0: 100, and 0: 50: 50. Samples were immersed in (conventional (c), revised (r), ionic (i), and modified (m)) SBF for 5 and 14 days to …

Experimental Composite Guidance Conduits For Peripheral Nerve Repair: An Evaluation Of Ion Release, X. F. Zhang, A. Coughlan, H. O'Shea, Mark R. Towler, S. Kehoe, D. Boyd

Chemical and Biochemical Engineering Faculty Research & Creative Works

Poly (lactide-co-glycolide) (PLGA) - Pluronic F127 - glass composites have demonstrated excellent potential, from the perspective of controlled mechanical properties and cytocompatibility, for peripheral nerve regeneration. In addition to controlling the mechanical properties and cytotoxicity for such composite devices, the glass component may mediate specific responses upon implantation via degradation in the physiological environment and release of constituent elements. However, research focused on quantifying the release levels of such therapeutic ions from these experimental medical devices has been limited. To redress the balance, this paper explores the ion release profiles for Si⁴⁺, Ca²⁺, Na⁺, …

Gallium Containing Glass Polyalkenoate Anti-Cancerous Bone Cements: Glass Characterization And Physical Properties, A. W. Wren, A. Coughlan, L. Placek, Mark R. Towler

Chemical and Biochemical Engineering Faculty Research & Creative Works

A gallium (Ga) glass series (0.48SiO₂-0.40ZnO-0.12CaO, with 0.08 mol% substitution for ZnO) was developed to formulate a Ga-containing Glass Polyalkenoate Cement (GPC) series. Network connectivity (NC) and X-ray Photoelectron Spectroscopy (XPS) was employed to investigate the role of Ga³⁺ in the glass, where it is assumed to act as a network modifier. Ga-GPC series was formulated with E9 and E11 polyacrylic acid (PAA) at 50, 55 and 60 wt% additions. E11 working times (T_w) ranged from 68 to 96 s (Lcon.) and 106 s for the Ga-GPCs (LGa-1 and LGa-2). Setting times (T_s) …

Examination Of The Migratory Potential Of Patterned Cortical Neurons Using Laser Direct-Write, T. B. Phamduy, C. J. Rivet, D. Kingsley, R. J. Gilbert, D. B. Chrisey

Chemical and Biochemical Engineering Faculty Research & Creative Works

We describe the patterning of neuronal cultures by a laser-based printing system. Embryonic chick cortical neurons were transferred into predetermined array positions with micron accuracy, enabling detailed study of neuronal migration, aggregation, and neurite outgrowth regulated by cell-cell interactions on a homogeneous surface. Images of cells were analyzed up to 14 days. Results demonstrated that increasing the spacing between neighboring groups of cells causes intra-group cells to preferentially migrate towards each other and aggregate towards the center of the printed 'spot'. In addition, increasing the printed 'spot' size encouraged migration towards neighboring groups of cells. © 2012 IEEE.

The Structural Characterization Of Ga 2o 3-Na 2o-Cao-Zno-Sio 2 Bioactive Glasses, T. J. Keenan, A. W. Wren, A. Coughlan, M. M. Hall, Mark R. Towler

Chemical and Biochemical Engineering Faculty Research & Creative Works

The characterization of bioactive glasses in which zinc (Zn) has been incrementally replaced by gallium (Ga). © 2012 IEEE.

Silver Coated Bioactive Glass Particles For Wound Healing Applications, P. Hassanzadeh, A. W. Wren, Mark R. Towler

Chemical and Biochemical Engineering Faculty Research & Creative Works

Hench and colleagues discovered that bone could bond chemically to certain glass compositions in 1969 [1]. This group of glasses is known as bioactive glasses [1]. Some special compositions of bioactive glasses will bond to soft tissues as well as bone [1]. One of the important characteristics of bioactive glasses is their ability to release beneficial ions such as Ca²⁺, Na⁺, Zn²⁺, Sr²⁺, and PO 43- in the body, which promote self-healing [2]. Bioactive glasses generally contain much less glass former (e.g., SiO₂, B₂O₃ etc.) than conventional …