Biomedical Engineering and Bioengineering Commons^™

Effect Of Local Steel Slag Incorporation On The Mechanical Properties Of Concrete, Ahmed Safaa Tariq Karmah, Wissam Khadum Alsaraj, Luma A. Zghair

Al-Esraa University College Journal for Engineering Sciences

The increasing interest in the production of concrete through the utilization of inexpensive materials has caused a rise in the number of studies concerning the use of materials with cementitious properties, such as Silica Fume, Slag, Fly Ash and other pozzolanic materials. Moreover, the increasing amounts of Steel Slag being produced from local factories that are being deposited without an available method of disposal provides an opportunity to harness the Slag in the production of an inexpensive, and possibly better concrete. Slag has been used as both an addition and substitution of the cement and fine aggregate. The mixtures included …

Decoding Climate Change: A Comprehensive Statistical Insight Into Temperature Anomalies In Iraq And Its Neighboring Countries, Jameel T. Al-Naffakha, Mohammed R. Al-Qassabanda, Israa Jafar

Al-Esraa University College Journal for Engineering Sciences

This study applies advanced statistical techniques, including the Mann-Kendall Trend Test and ARIMA forecasting, to validate and predict temperature anomalies across Iraq and its neighboring countries (2014–2024). Findings confirm a statistically significant warming trend (p < 0.00000005) across all nations, with Syria (1.02°C) and Turkey (0.97°C) experiencing the highest anomalies. GIS-based spatial analysis highlights regional disparities, identifying climate-vulnerable zones. The persistent rise in temperature anomalies correlates with worsening water scarcity, desertification, and extreme weather events, including prolonged droughts and heatwaves. Iraq’s peak anomaly (1.48°C) has exacerbated heat stress, agricultural decline, and reduced river inflows, while Kuwait and Saudi Arabia struggle to maintain critical infrastructure under record-breaking temperatures exceeding 50°C. These climate shifts pose severe risks to water availability, food security, and energy demand, necessitating urgent policy interventions. Key recommendations include enhanced water resource management, climate-adaptive agriculture, and renewable energy expansion. If left unaddressed, rising temperatures could destabilize the region, increasing socio-economic vulnerabilities and escalating resource conflicts. This study underscores the need for cross-border collaboration and sustainable adaptation policies to mitigate the long-term impacts of climate change in the Middle East.

Optimal Power Flow Control In The Iraqi Power Grid Using Artificial Intelligence Algorithms For Carbon Emission Reduction, Mohammed Shakir Juber

Al-Esraa University College Journal for Engineering Sciences

Iraq’s power sector remains in a protracted and severe crisis characterized by a significant mismatch between supply and demand, high levels of losses during transmission and distribution, as well as an increasing challenge to the resources base being largely unfavourably. These inefficiencies impose heavy costs on the national economy in excess of 40 billion annually and they also reinforce greenhouse gas emissions, and exacerbate environmental issues. To deal with these problems, we proposed in this paper that a new hybrid AI tool should be developed for the solution of multi-objective optimization problem based on purpose Genetic Algorithm (GA) merger with …

Applying Machine Learning Techniques For Early Detection Of Cyber Attacks On Iot Devices, Noor Adnan Allamy

Al-Esraa University College Journal for Engineering Sciences

This research designs, implements, and evaluates a machine learning-based framework for the early detection of cyber attacks targeting Internet of Things (IoT) devices, with a specific focus on the context and challenges present in Iraq. The study conducts a comparative analysis of three supervised learning algorithms—Support Vector Machine (SVM), Random Forest (RF), and Deep Neural Networks (DNN)—using a combination of benchmark datasets (NSL-KDD, CIC-IDS-2017, Bot-IoT) and a synthesized dataset adapted to simulate the Iraqi threat landscape. Key performance metrics, including accuracy, precision, recall, and F1-score, were used for evaluation. The proposed Random Forest model demonstrated superior performance, achieving an accuracy …

Ai-Enhanced Heat Transfer Optimization In Magnetic Bio-Nanofluids, Hasan Attyah Shaboot

Al-Esraa University College Journal for Engineering Sciences

This study presents a hybrid Artificial Intelligence–Computational Fluid Dynamics (AI-CFD) framework for optimizing heat transfer in magnetic bio-nanofluids subjected to external magnetic fields. Magnetic bio-nanofluids, composed of biocompatible base fluids containing superparamagnetic nanoparticles, exhibit tunable thermal and flow behavior, making them promising for biomedical and micro-cooling applications. Conventional optimization methods based on experiments or brute-force CFD are computationally expensive and limited in exploring the full design space. To overcome these challenges, an Artificial Neural Network (ANN) surrogate model was developed to predict two key performance indicators, the Nusselt number and the friction factor, with high accuracy (R² > 0.997). The surrogate …

Hybrid Experimental–Computational Study On The Energy Absorption Of Graphene Nanoplatelet-Reinforced Sandwich Structures, Hamdan Yousif Hamdan

Al-Esraa University College Journal for Engineering Sciences

Background: Sandwich composites are widely used in aerospace, automotive, and marine applications because of their lightweight, stiffness, and strength, but they remain prone to out-of-plane impacts and barely visible impact damage (BVID). Graphene Nanoplatelets (GNPs) have shown strong potential to improve fracture toughness and impact resistance. However, hybrid experimental–computational studies applying such reinforcement are still lacking in developing contexts like Iraq, where practical and accessible solutions are essential. Aims: The study investigates the effect of GNP reinforcement on the low-velocity impact behavior and energy absorption of glass fiber/epoxy sandwich panels with PVC foam and balsa wood cores. Objectives include fabricating …

Effect Of Thick Closed Walls Of West And South Elevations Of Iraqi Middle And South Territory Housing Building On Reducing Energy Use, Abeer Qasim Jbur, Shaimaa M. Hamza, Mayyadah Lutfi Abdulwahhab

Al-Esraa University College Journal for Engineering Sciences

Thermal insulation is one of the most important factors in achieving sustainability, increasing efficiency, and reducing energy consumption, but modern insulation materials are expensive, in addition to their availability. Therefore, through our research, we resorted to investigating the issue of reducing thermal load in buildings through the use of thick-walled facades in the southern and western facades, where we studied a building with two windows with windows on the southern and western facades and another without these windows and with thick walls, for two locations, the first in central Iraq, which is the city of Baghdad, and the second in …

The Impact Of Ethyl Levulinate Additive On Diesel Engine Performance And Emissions: An Experimental Study, Maha Ali Ghadbaan

Al-Esraa University College Journal for Engineering Sciences

This study explores the environmental and operational impact of adding Ethyl Levulinate—a biodegradable ester derived from biomass—to diesel fuel. A fuel blend known as B5El6 (comprising 5% biodiesel and 6% Ethyl Levulinate) was prepared and tested experimentally using a single-cylinder diesel engine operating at a constant speed of 1500 rpm under full load conditions. Performance metrics and emission data were recorded, and a Life Cycle Assessment (LCA) was conducted using the IMPACT2002+ methodology.

The results revealed that B5El6 significantly reduced greenhouse gas emissions (100 kg CO2 eq) and improved ecosystem quality. However, it presented challenges in terms of human health …

The Role Of The Scenario In Formulating The Contemporary Architectural Text, Rounaq Arif Mohsin, Abbas Ali Hamza, Bashar Shamil Alkhafaji

Al-Esraa University College Journal for Engineering Sciences

In order to create an integrated architectural text, which is a complicated art that blends beauty and practical elements, a rigorous design procedure is necessary. In this situation, the scenario’s role becomes crucial in developing the current architectural text and directing architectural approaches. In order to better understand how the scenario influences the design process and the interactions between various architectural aspects, this project intends to explore and analyze the impact of the scenario in developing and refining architectural text formulation approaches.

The study looks at the idea of a scenario and how it has been used in architecture, as …

Investigation Of Some Physical Properties Of Slurry Infiltrated Fibrous Concrete (Sifcon) Under Different Curing Times, Rand Kh. Mahmoud, Mohmmed Juad Khadhim, Fayq Hasan Jabbar

Al-Esraa University College Journal for Engineering Sciences

This research studied the effects of different types fibers (Basalt, Carbon and Basalt-Carbon hybrid mix) and curing ages (7, 14, 28 and 56 days) on some physical properties of - Slurry infiltrated fibrous concrete (SIFCON). Density, ultrasonic pulse velocity UPV, Poisson’s ratio and water absorption were measured for the experimental study with 30% cement replacement by Class F fly ash to increase sustainability. It was found that properties were significantly affected by the type and dosage of fiber admixture. The UPV was enhanced by basalt fibers and the absorption reduced up to an optimal range of 3–5% after which agglomeration …

Mechanical And Durability Properties Of Cement Panels Reinforced With Hybrid And Pva Fibers, Shukran H. Faraj, Mohammed J. Kadhim

Al-Esraa University College Journal for Engineering Sciences

This study examines the synergistic effects of hybrid fibers (HF) and polyvinyl alcohol (PVA) fibers on the structural and thermal properties of silica-fume cement panels. Scanning electron microscopy (SEM) was employed to examine mortar mixtures with varying fiber content to assess their enhancement of microstructure. We conducted several experiments on compressive, flexural, and splitting tensile strength, in addition to water absorption and thermal conductivity. The results indicate that 1% HF exhibits superior mechanical qualities, with a compressive strength of 46.89 MPa, a flexural strength of 8.56 MPa, and a reduced thermal conductivity of 0.83 W/m•K. PVA fibers at 2% enhance …

Experimental Analysis Of Droplet Deformation Dynamics In Combined Dc Electric And Shear Flow Fields Using Dpiv, Ayad Ibrahim Khlewee

Al-Esraa University College Journal for Engineering Sciences

This paper presented a systematic study of such droplet deformation at the intersection of uniform DC electric field and hydrodynamic shear flow, in which we focused on conductivity ratio (R) and permittivity ratio (S), describing their influence. The results demonstrate that droplet dynamics is extremely sensitive to the regime: under DC only, either elongation or compression depending on whether R > S or R S, similarly to classical EHD predictions. Under shear-only conditions, deformation was dictated by the balance of elongational stresses (EC) and rotational stresses (RC), with increasing capillary number (Ca) leading to progressive elongation and oscillatory orientation dynamics. When …

The Imaginary In Architecture: The Conceptual Structure Of The Imaginary And Its Manifestations In Architectural Text, Noora Ghadir Hlail, Abbas Ali Hamza Al Greiza

Al-Esraa University College Journal for Engineering Sciences

This study explores the concept of the imaginary as a collective cognitive and cultural structure that shapes symbolic reality through images, myths, and deeply rooted symbols in collective memory. The research applies this concept within the field of architecture, aiming to understand how the imaginary is embodied in architectural texts as symbolic carriers of identity and cultural meaning. Adopting a descriptive-analytical methodology, the study develops a theoretical framework comprising key components—preconditions, mechanisms, and traits of the imaginary—and applies it to two selected case studies: the General Secretariat of the Iraqi Council of Ministers and the Louvre Abu Dhabi Museum. The …

Generative Ai For Method Development In Analytical Chemistry: A New Paradigm In Experimental Design And Optimization, Yasir Fathi Mahmood

Al-Esraa University College Journal for Engineering Sciences

The fast development of artificial intelligence (AI), especially generative AI models, is changing the environment of analytical chemistry. As classical method generation in analytical methods relies on manual trial-and-error methodology as well as statistical methods, generative AI is a new paradigm with automated generation of experimental methodology and optimization. In this paper, the authors discuss the use of generative AI-based technologies, including large language models (LLMs) and neural network-based generators, to create new, efficient, and customized methods of analysis. The paper examines existing applications, technology frameworks, and issues and offers a roadmap with regards to the future incorporation of generative …

Numerical Modeling And Experimental Validation Of A High-Temperature Latent Heat Thermal Energy Storage System Using Metallic Phase Change Materials For Concentrated Solar Power Applications, Fouad Hashim Sharhan

Al-Esraa University College Journal for Engineering Sciences

To ensure reliable performance for the power-block of CSP plants, high power density and near-isothermal discharge must be achieved. A robust means of achieving this is through thermal energy storage (TES). High temperature latent heat storage (LHS) with phase change materials (PCMs) can serve these purposes, however the conventional salts used in PCMs typically suffer from low thermal conductivity that limits power density and increases energy storage charging/discharging times. This manuscript investigates ways to address these limitations using high temperature metallic phase change materials (MPCMs) while also developing a validated numerical framework to aid in their design. To this end, …

Thermal Performance Evaluation Of Solar Cooling Systems For Educational Facilities In Baghdad, Yasser Alawi Mohammed Attia Al-Jubouri

Al-Esraa University College Journal for Engineering Sciences

Schools in Baghdad also suffer from poor thermal comfort, which is a common problem in high-temperature and low-humidity arid climates such as that of the city, where using cooling devices leads to a large energy demand and overloads on the national power grid. Such study offers a thorough assessment of the thermal performance of solar-based cooling systems in an efficient manner to be suitable for educational buildings in Baghdad. The analysis is centred on a solar thermal cooling system with absorption as the heat interaction medium, and an experimental characterisation and mathematical simulation itself are performed. A pilot installation, consisting …

Enhancing 6g Network Security With Quantum Key Distribution: A Comprehensive Review, Bassma M. Kamil

Al-Esraa University College Journal for Engineering Sciences

With the considerable progress of sixth-generation (6G) networks further on the horizon, security has attracted much attention in the face of increasingly sophisticated threats, especially from quantum computing. Classical cryptographic schemes based on computational hardness are becoming more and more brittle, as they can easily be attacked with a quantum computer. Quantum Key Distribution (QKD) arises as a promising tool for information-theoretic security through quantum mechanics to obtain an unbreakable key by exchanging unknown bit sequences. In this paper, we provide an extensive survey on the integration of QKD both in the envisioned 6G architecture, including current implementations, technical feasibility, …

Protection The Nfv Net-Work Using The Random Forest Classification, Mustafa H. Taha, Ibtesam Jomaa Hawi, Wafaa Waheeb Abdullah Ali

Al-Esraa University College Journal for Engineering Sciences

A misuse attack is the most common and dangerous type of attack that could target NFV (Network Function Virtualization). In a misuse attack, the attacker attempts to consume the NVF environment’s resources by sending a large amount of traffic. To protect the NFV environment, an early and accurate misuse attack detection system has been proposed based on NFV and Random Forest Classifier. The proposed model starts with importing the dataset and analyzing it then pre-processing and feature selection using a PSO (particle swarm optimization) Test algorithm, classification is based on the most common and efficient machine learning technique, which is …

Design Of A Hybrid System For Powering Wireless Communication Units, Samer Rabih, Ahed Alboody

Al-Esraa University College Journal for Engineering Sciences

Wireless and optical communication units are becoming more widespread nowadays, especially in rural areas. Therefore, feeding electricity has become essential for the continuity of services. As a result of economic and social development, there has been an urgent need to supply electrical power for the basic requirements of wired and wireless telecommunications equipment. This is linked to public safety, long life, and connection to uninterruptible power systems to ensure continuous power supply, whether from renewable energy sources or traditional diesel systems. This research studies and designs a renewable energy (solar) power system to power telecommunications equipment. The proposed power system …

Dynamic Ris-Enabled Massive Mimo Noma Systems Power Allocation Optimization For 6g Using Machin Learning Approach, Mohamed Hassan, Khalid Hamid, Salah Hagahmoodi, Elmuntaser Hassan

Al-Esraa University College Journal for Engineering Sciences

This study examines spectral efficiency (SE) and throughput throughout a spectrum of user densities (from 50 to 1000 users), user mobility speeds (0 to 350 km/h), latency, packet loss, and fairness index, within a wide range of signal-to-noise ratios (SNRs). The analysis includes a number of different situations, such as (i) cooperative non-orthogonal multiple access (NOMA) with massive multiple-input multiple-output (mMIMO), (ii) mMIMO cooperative NOMA integrated with cognitive radio (CR), and (iii) CR-assisted mMIMO cooperative NOMA enhanced with reconfigurable intelligent surfaces (RIS). All of these are part of 6G millimeter-wave (mmWave) networks. The study investigates the enhancement of latency, packet …

Harnessing Waste Heat From Solar Cells Using Advanced Energy Storage Systems, Hayder Ibrahim Ismael

Al-Esraa University College Journal for Engineering Sciences

Renewable energy is largely produced by photovoltaic (PV) solar cells, but such a process is greatly impacted with thermal buildup as the solar cells work. Redundant heat not only lowers the level of electrical production, but also hastens deterioration and decreases the life-time of PV modules. In this study, we suggest a hybrid system which combines high-performance energy storage devices, namely, super-capacitors, and PV modules coupled with the use of waste heat as a source of useful energy and which increases efficiency of the system in conjunction. In order to estimate the potential amount of thermal energy recovery, as well …

Empirical Research Of A Greenhouse Monitoring And Controlling System Using Zigbee Protocol, Mohammed Hijazeh, Salah Hagahmoodi

Al-Esraa University College Journal for Engineering Sciences

Greenhouses are of great importance in the agricultural field as they provide the appropriate and important environment for the growth and production of various plants regardless of the surrounding environmental conditions. Monitoring and controlling these houses are considered necessary and important in order to provide the required environment and obtain the best production. Therefore, the aim of this project is to study the monitoring and control of these houses using wireless sensor networks, which are considered modern and simple methods due to the accuracy of work and little effort they provide, and thus better production. The study will be for …

Designing An Efficient Deduplication Algorithm For Audio Files In Cloud Storage, Ammar Zakzouk, Alaa Al Sebae, Hasan Hasan

Al-Esraa University College Journal for Engineering Sciences

Data duplication is a significant challenge in large-scale data storage systems, as it consumes storage space and impacts data organization, management, and processing. An optimal storage system effectively utilizes available storage space. To solve this problem, hash algorithms are employed to generate hash keys for files. Matching files have the same hash key. However, the hash key for two different files in the data may match, and this is what we refer to as a collision. The collision issue is related to the length of the hash key. As the length of the hash key increases, the probability of a …

The Future Of Al-Driven Cybersecurity For Advanced Iot, Estqlal Hammad Dhahi, Sanaa Hammad Dhahi, Ohood Fadil Alwan

Al-Esraa University College Journal for Engineering Sciences

Internet of Things technologies experience rapid advancement because of 5G networks and upcoming 6G technologies, which resulted in transformational changes to security dynamics. This study examines the functionality of artificial intelligence through platforms developed to secure Internet of Things systems. The demand for improved security capabilities has become essential because IoT devices generate new assault channels, and their market penetration speed is escalating. Machine learning algorithms, together with deep learning and natural language processing methods, are investigated in this paper for enhancing the security protocols of IoT systems through studies found in academic literature. The paper explores upcoming developments and …

Foundations Of Artificial Intelligence In Healthcare Diagnostics: A Systematic Survey, Raghad Tariq Al-Hassani

Al-Esraa University College Journal for Engineering Sciences

Artificial Intelligence (AI) is becoming the cornerstone of the future of healthcare diagnostics, that has to ability to change the healthcare diagnostic landscape in terms of diagnostic accuracy, speed, and availability. This systematic review investigates the basic methods, tools, applications, and challenges involved in the integration of AI in diagnostic medicine. It emphasizes the using of machine learning models, deep learning networks (e.g., CNNs), NLP for clinical documentation, and smart computing infrastructures, such as edge device and IoMT. They are making possible real-time, data-driven decision making that is already at human-expert-level performance or, in some cases, even better (in the …

Secure Gif Files Based On Zuc Stream Cipher And Present Algorithm, Suhad Fakhri Hussein

Al-Esraa University College Journal for Engineering Sciences

Some important security needs include authentication, confidentiality, integrity, non-repudiation, and user privacy. Many security systems include these required protections for information transmission. The encryption process is one of the most important security measures. Many secure encryption algorithms are based on different keys and key lengths to ensure a high degree of security. GIF file format is common file format that is used in several application, securing these files through transmission is imperative. In this paper, an efficient method for encryption GIF file is proposed based on using modified present algorithm, modified ZUC stream cipher, and an efficient method for key …

Advanced Strategies And Solutions Towards More Secure And Effective Two-Factor Authentication In Networking, Zahraa Sameer Jawad

Al-Esraa University College Journal for Engineering Sciences

With the rapid increase in cybersecurity threats targeting network systems, traditional two-factor authentication (2FA) methods are insufficient to address advanced attacks. Vulnerabilities such as phishing, SIM-swapping, and social engineering exploit the limitations of SMS-based and email-based 2FA. This paper examines advanced strategies and solutions for securing networked environments through robust 2FA mechanisms, focusing on approaches like elliptic curve cryptography (ECC), digital certificates, and biometric verification. This article offers a comparative review of various strategies about their effectiveness in enhancing security, while also highlighting their capacity to optimize user-friendliness and adaptability to emerging threats. Research findings promote an effective countermeasure strategy …

Advancements In Ultrasound Technology And Iot Security: A Physics-Based Approach To Enhanced Imaging With Lightweight Encryption Algorithms, Noor Fawzi Shafiq

Al-Esraa University College Journal for Engineering Sciences

The rapid advancements in ultrasound technology, coupled with the growing significance of IoT security, present a unique opportunity to enhance imaging systems while ensuring data integrity. This study explores the integration of physics-based principles in ultrasound imaging, focusing on how lightweight encryption algorithms can secure data transmitted from IoT devices.Ultrasound technology has evolved significantly, benefiting from improved imaging techniques and the incorporation of IoT devices. As these devices proliferate across various applications, including healthcare and industrial monitoring, the need for secure data transmission becomes paramount. This paper proposes a framework that combines advanced ultrasound imaging with robust lightweight encryption methods …

Artificial Intelligence Approaches To Mitigating Network Congestion In Iot Systems, Aysar Hadi Oleiwi

Al-Esraa University College Journal for Engineering Sciences

The unprecedented explosion of Internet of Things (IOT) devices has elevated the requirements of the network infrastructures to unprecedented levels, causing severe congestion problems, especially in applications which demand low latency, high throughput, and real-time feedback. Static routing protocols, AQM, and TCP variants are some of the traditional mechanisms for congestion control that are unable to perform efficiently in dynamic and diverse IoT environments as they are reactive-based and inflexible. To this end, in this paper, we explore the promising ability of Artificial Intelligence (AI) methods such as Machine Learning (ML), Deep Learning (DL), Reinforcement Learning (RL), and their combination …

Groundwater Quality Analyses For Irrigation Purposes In Salah Al-Din, Iraq: A Review, Noor A. Radhi, Dawood E. Sachit, Abdul-Sahib T. Al-Madhhachi

Al-Esraa University College Journal for Engineering Sciences

The focus of this study is the effect of the physical and chemical characteristics of groundwaters on plants and agricultural crops, following the last studies on this matter. The results underscore the necessity for groundwater treatment before its utilization in irrigation for sustainable agricultural farming. It is also possible to identify which crop type can be grown in well-watered land, according to the characteristics of irrigation water and the yield of each crop. The study also introduces some ideas about irrigation water quality parameters such as Electrical conductivity (EC), Total Dissolved Solids (TDS), pH, Chloride (Cl^–), Sodium (Na …