Biomedical Engineering and Bioengineering Commons^™

A Centralised Multi-Objective Model Predictive Control For Biventricular Assist Devices, Vivian Koh Ci Ai

Student Works (2020-2029)

Heart failure is defined as failure of heart to deliver adequate blood flow rate to support tissue perfusion. Heart failure can be treated by implantation of a left ventricular assist device (LVAD) for left heart failure patients, or a biventricular assist device (BiVAD) for bi-heart failure patients. Since left heart failure predominates right heart failure, all commercial ventricular assist devices are LVADs. Therefore, two LVADs are frequently used as BiVAD for bi-heart failure patients. Clinically, the constant speed (CS) control of BiVAD fails to adapt pump flow rate according to physiological changes, thus putting patients at risk of ventricular suction …

Dictionary-Based Diabetes Distress Detection Mechanism Using Facebook Reactions, Marian Cynthia Martin

Student Works (2020-2029)

Over the last decade, the internet has paved the way for Facebook to become the digital hub for social networking transforming the ways of sharing information carrying rich and valuable information of users’ perspectives. Facebook support groups compromised of online diabetes communities facilitates users to connect to different people with similar conditions and share information wrapped in their own sentiments and emotions. Diabetes being a major life threatening health issue, results in diabetes distress among the online diabetes community. However, the detection of diabetes distress had been carried out manually using surveys and questionnaires, accentuating the lack of studies in …

Comparison Of Machine Learning Models: Gesture Recognition Using A Multimodal Wrist Orthosis For Tetraplegics, Charlie Martin

The Journal of Purdue Undergraduate Research

Many tetraplegics must wear wrist braces to support paralyzed wrists and hands. However, current wrist orthoses have limited functionality to assist a person’s ability to perform typical activities of daily living other than a small pocket to hold utensils. To enhance the functionality of wrist orthoses, gesture recognition technology can be applied to control mechatronic tools attached to a novel fabricated wrist brace. Gesture recognition is a growing technology for providing touchless human-computer interaction that can be particularly useful for tetraplegics with limited upper-extremity mobility. In this study, three gesture recognition models were compared—two dynamic time-warping models and a hidden …

A 3d Image-Guided System To Improve Myocardial Revascularization Decision-Making For Patients With Coronary Artery Disease, Haipeng Tang

Dissertations

OBJECTIVES. Coronary artery disease (CAD) is the most common type of heart disease and kills over 360,000 people a year in the United States. Myocardial revascularization (MR) is a standard interventional treatment for patients with stable CAD. Fluoroscopy angiography is real-time anatomical imaging and routinely used to guide MR by visually estimating the percent stenosis of coronary arteries. However, a lot of patients do not benefit from the anatomical information-guided MR without functional testing. Single-photon emission computed tomography (SPECT) myocardial perfusion imaging (MPI) is a widely used functional testing for CAD evaluation but limits to the absence of anatomical information. …

Using Natural Language Processing And Sentiment Analysis To Augment Traditional User-Centered Design: Development And Usability Study, Curtis L. Petersen, Ryan Halter, David Kotz, Lorie Loeb, Summer B. Cook, Dawna M. Pidgeon, Brock Christensen, John A. Batsis

Dartmouth Scholarship

Background: Sarcopenia, defined as the age-associated loss of muscle mass and strength, can be effectively mitigated through resistance-based physical activity. With compliance at approximately 40% for home-based exercise prescriptions, implementing a remote sensing system would help patients and clinicians to better understand treatment progress and increase compliance. The inclusion of end users in the development of mobile apps for remote-sensing systems can ensure that they are both user friendly and facilitate compliance. With advancements in natural language processing (NLP), there is potential for these methods to be used with data collected through the user-centered design process.

Objective: This study aims …

Three-Dimensional (3d) Reconstruction Of Ultrasound Foetal Images Using Visualisation Toolkit (Vtk), Henry Dusim Grace Anabela

Student Works (2020-2029)

Three-dimensional (3D) reconstruction of two-dimensional (2D) ultrasound images has been used for easier analysing of anatomy related to abnormalities. 3D image reconstruction is required as it helps doctors interpret results and assess any defects quickly. Not only does it improve the accuracy of diagnosis, but it also saves a lot of time. In this thesis, 295 slices of 2D ultrasound images of a foetal are used to do 3D reconstruction using surface rendering, volume rendering, and multiplanar rendering technique. A similar software known as 3D Slicer is also used to reconstruct the ultrasound image for comparison purpose. VTK can easily …

Β-Amyloid And Tau Drive Early Alzheimer's Disease Decline While Glucose Hypometabolism Drives Late Decline, Tyler C. Hammond, Xin Xing, Chris Wang, David Ma, Kwangsik Nho, Paul K. Crane, Fanny Elahi, David A. Ziegler, Gongbo Liang, Qiang Cheng, Lucille M. Yanckello, Nathan Jacobs, Ai-Ling Lin

Sanders-Brown Center on Aging Faculty Publications

Clinical trials focusing on therapeutic candidates that modify β-amyloid (Aβ) have repeatedly failed to treat Alzheimer’s disease (AD), suggesting that Aβ may not be the optimal target for treating AD. The evaluation of Aβ, tau, and neurodegenerative (A/T/N) biomarkers has been proposed for classifying AD. However, it remains unclear whether disturbances in each arm of the A/T/N framework contribute equally throughout the progression of AD. Here, using the random forest machine learning method to analyze participants in the Alzheimer’s Disease Neuroimaging Initiative dataset, we show that A/T/N biomarkers show varying importance in predicting AD development, with elevated biomarkers of Aβ …

Identification Of Microscopy Cell Images By Using Convolutional Neural Network Application, Ajis Norfatin Farisya

Student Works (2020-2029)

Breast cancer has been the major factor of cancer death and the second main cause of women’s deaths in the world. The false positive results of this cancer cell detection during the screening test leads to false treatment and emotional disturbance of the patients. Thus, breast cancer cell lines (MCF7) is used as the microscopy image samples together with the Human Bone Osteosarcoma Epithelial Cells (U2OS), and Human Hepatocyte as control to study the effectiveness of convolutional neural network (CNN) as a method of image recognition. The objectives of this study are to determine the ability of convolutional neural network …

An Improved Bone Age Assessment Using Advanced Image Processing And Deep Learning Approach, Kim Meng Liang

Student Works (2020-2029)

Pediatricians often apply bone age assessment to measure the skeletal maturity of children and to predict the future height. These discrepancies are good indicators for diagnosing growth disorders. Normally, left hand skeletal is employed in this assessment. The low quality of ossification sites of carpals deteriorates the pediatrician’s visibility in inspecting the pertinent radiographic manifestations. This in turn affects the bone age assessment. Therefore, we have to enhance the quality before assessing them. Histogram equalization is one of the contrast enhancement techniques that suit this type of enhancement. Existing histogram equalizations, however, are confronting with problems in preserving the brightness …

Active Deep Learning Method To Automate Unbiased Stereology Cell Counting, Saeed Alahmari

USF Tampa Graduate Theses and Dissertations

Cell quantification in histopathology images plays a significant role in understanding and diagnosing diseases such as cancer and Alzheimers. The gold-standard for quantifying cells in tissue sections is the unbiased stereology approach. Unfortunately, in unbiased stereology current practices rely on a well-trained human to manually count hundreds of cells in microscopy images. However, this human-based manual approach is time-consuming, labor-intensive, subject to human errors, recognition bias, fatigue, variable training, poor reproducibility, and inter-observer error. Thus, the lack of high-throughput technology for automating unbiased stereology analyses remains a major obstacle to further progress in a wide range of neuroscience and cancer …

Model-Based Deep Siamese Autoencoder For Clustering Single Cell Rna-Seq Data, Zixia Meng

Theses

In the biological field, the smallest unit of organisms in most biological systems is the single cell, and the classification of cells is an everlasting problem. A central task for analysis of single-cell RNA-seq data is to identify and characterize novel cell types. Currently, there are several classical methods, such as K-means algorithm, spectral clustering, and Gaussian Mixture Models (GMMs), which are widely used to cluster the cells. Furthermore, typical dimensional reduction methods such as PCA, t-SNE, and ZIDA have been introduced to overcome “the curse of dimensionality”. A more recent method scDeepCluster has demonstrated improved and promising performances in …

Exploring Attacks And Defenses In Additive Manufacturing Processes: Implications In Cyber-Physical Security, Nicholas Deily

McKelvey School of Engineering Graduate Student Theses & Dissertations

Many industries are rapidly adopting additive manufacturing (AM) because of the added versatility this technology offers over traditional manufacturing techniques. But with AM, there comes a unique set of security challenges that must be addressed. In particular, the issue of part verification is critically important given the growing reliance of safety-critical systems on 3D printed parts. In this thesis, the current state of part verification technologies will be examined in the con- text of AM-specific geometric-modification attacks, and an automated tool for 3D printed part verification will be presented. This work will cover: 1) the impacts of malicious attacks on …

Ml-Medic: A Preliminary Study Of An Interactive Visual Analysis Tool Facilitating Clinical Applications Of Machine Learning For Precision Medicine, Laura Stevens, David Kao, Jennifer Hall, Carsten Görg, Kaitlyn Abdo, Erik Linstead

Engineering Faculty Articles and Research

Accessible interactive tools that integrate machine learning methods with clinical research and reduce the programming experience required are needed to move science forward. Here, we present Machine Learning for Medical Exploration and Data-Inspired Care (ML-MEDIC), a point-and-click, interactive tool with a visual interface for facilitating machine learning and statistical analyses in clinical research. We deployed ML-MEDIC in the American Heart Association (AHA) Precision Medicine Platform to provide secure internet access and facilitate collaboration. ML-MEDIC’s efficacy for facilitating the adoption of machine learning was evaluated through two case studies in collaboration with clinical domain experts. A domain expert review was also …

Development Of Fully Balanced Ssfp And Computer Vision Applications For Mri-Assisted Radiosurgery (Mars), Jeremiah Sanders

Dissertations and Theses (Open Access)

Prostate cancer is the second most common cancer in men and the second-leading cause of cancer death in men. Brachytherapy is a highly effective treatment option for prostate cancer, and is the most cost-effective initial treatment among all other therapeutic options for low to intermediate risk patients of prostate cancer. In low-dose-rate (LDR) brachytherapy, verifying the location of the radioactive seeds within the prostate and in relation to critical normal structures after seed implantation is essential to ensuring positive treatment outcomes.

One current gap in knowledge is how to simultaneously image the prostate, surrounding anatomy, and radioactive seeds within the …

Deep Cellular Recurrent Neural Architecture For Efficient Multidimensional Time-Series Data Processing, Lasitha S. Vidyaratne

Electrical & Computer Engineering Theses & Dissertations

Efficient processing of time series data is a fundamental yet challenging problem in pattern recognition. Though recent developments in machine learning and deep learning have enabled remarkable improvements in processing large scale datasets in many application domains, most are designed and regulated to handle inputs that are static in time. Many real-world data, such as in biomedical, surveillance and security, financial, manufacturing and engineering applications, are rarely static in time, and demand models able to recognize patterns in both space and time. Current machine learning (ML) and deep learning (DL) models adapted for time series processing tend to grow in …

Lung Nodule Malignancy Prediction From Computed Tomography Images Using Deep Learning, Rahul Paul

USF Tampa Graduate Theses and Dissertations

Lung cancer has a high incidence and mortality rate. The five-year relative survival rate for all lung cancers is 18%. Due to the high mortality and incidence rate of lung cancer worldwide, early detection is essential. Low dose Computed Tomography (CT) is a commonly used technique for screening, diagnosis, and prognosis of non-small cell lung cancer (NSCLC). The National Lung Screening Trial (NLST) compared low-dose helical computed tomography (LDCT) and standard chest radiography (CXR) for three annual screens and reported a 20% relative reduction in lung cancer mortality for LDCT compared to CXR. As such, LDCT screening for lung cancer …

Deep Learning For Digitized Histology Image Analysis, Sudhir Sornapudi

Doctoral Dissertations

“Cervical cancer is the fourth most frequent cancer that affects women worldwide. Assessment of cervical intraepithelial neoplasia (CIN) through histopathology remains as the standard for absolute determination of cancer. The examination of tissue samples under a microscope requires considerable time and effort from expert pathologists. There is a need to design an automated tool to assist pathologists for digitized histology slide analysis. Pre-cervical cancer is generally determined by examining the CIN which is the growth of atypical cells from the basement membrane (bottom) to the top of the epithelium. It has four grades, including: Normal, CIN1, CIN2, and CIN3. In …

Finding A Viable Neural Network Architecture For Use With Upper Limb Prosthetics, Maxwell Lavin

Master of Science in Computer Science Theses

This paper attempts to answer the question of if it’s possible to produce a simple, quick, and accurate neural network for the use in upper-limb prosthetics. Through the implementation of convolutional and artificial neural networks and feature extraction on electromyographic data different possible architectures are examined with regards to processing time, complexity, and accuracy. It is found that the most accurate architecture is a multi-entry categorical cross entropy convolutional neural network with 100% accuracy. The issue is that it is also the slowest method requiring 9 minutes to run. The next best method found was a single-entry binary cross entropy …

Paper-Based Flexible Electrode Using Chemically-Modified Graphene And Functionalized Multiwalled Carbon Nanotube Composites For Electrophysiological Signal Sensing, Md Faruk Hossain, Jae Sang Heo, John Nelson, Insoo Kim

Bioelectrics Publications

Flexible paper-based physiological sensor electrodes were developed using chemically-modified graphene (CG) and carboxylic-functionalized multiwalled carbon nanotube composites (f@MWCNTs). A solvothermal process with additional treatment was conducted to synthesize CG and f@MWCNTs to make CG-f@MWCNT composites. The composite was sonicated in an appropriate solvent to make a uniform suspension, and then it was drop cast on a nylon membrane in a vacuum filter. A number of batches (0%~35% f@MWCNTs) were prepared to investigate the performance of the physical characteristics. The 25% f@MWCNT-loaded composite showed the best adhesion on the paper substrate. The surface topography and chemical bonding of the proposed CG-f@MWCNT …

Automatic Methods To Enhance The Quality Of Colonoscopy Video, Nidhal Kareem Shukur Azawi

Graduate Theses and Dissertations

Colonoscopy is a form of endoscopy because it uses colonoscopy device to help the doctor to understand a colon patient. Enhancing the quality of Colonoscopy images is a challenge because of the wet and dynamic environment inside the colon causes many problems even the colonoscope devise has a good quality. Some of these problems are blurriness, specular highlights shiny areas.

In this work, different kinds of techniques have been investigated in order to improve the quality of colonoscopy images. Also, variety of preprocessing approaches (removing bad images, resizing images, median filtration with and without image resizing) have been conducted to …

Improving 3d Printed Prosthetics With Sensors And Motors, Rachel Zarin

Honors Projects

A 3D printed hand and arm prosthetic was created from the idea of adding bionic elements while keeping the cost low. It was designed based on existing models, desired functions, and materials available. A tilt sensor keeps the hand level, two motors move the wrist in two different directions, a limit switch signals the fingers to open and close, and another motor helps open and close the fingers. All sensors and motors were built on a circuit board, programmed using an Arduino, and powered by a battery. Other supporting materials include metal brackets, screws, guitar strings, elastic bands, small clamps, …

Using Feature Extraction From Deep Convolutional Neural Networks For Pathological Image Analysis And Its Visual Interpretability, Wei-Wen Hsu

Electrical & Computer Engineering Theses & Dissertations

This dissertation presents a computer-aided diagnosis (CAD) system using deep learning approaches for lesion detection and classification on whole-slide images (WSIs) with breast cancer. The deep features being distinguishing in classification from the convolutional neural networks (CNN) are demonstrated in this study to provide comprehensive interpretability for the proposed CAD system using the domain knowledge in pathology. In the experiment, a total of 186 slides of WSIs were collected and classified into three categories: Non-Carcinoma, Ductal Carcinoma in Situ (DCIS), and Invasive Ductal Carcinoma (IDC). Instead of conducting pixel-wise classification (segmentation) into three classes directly, a hierarchical framework with the …

Seeing Eye To Eye: A Machine Learning Approach To Automated Saccade Analysis, Maigh Attre

Honors Scholar Theses

Abnormal ocular motility is a common manifestation of many underlying pathologies particularly those that are neurological. Dynamics of saccades, when the eye rapidly changes its point of fixation, have been characterized for many neurological disorders including concussions, traumatic brain injuries (TBI), and Parkinson’s disease. However, widespread saccade analysis for diagnostic and research purposes requires the recognition of certain eye movement parameters. Key information such as velocity and duration must be determined from data based on a wide set of patients’ characteristics that may range in eye shapes and iris, hair and skin pigmentation [36]. Previous work on saccade analysis has …

The Affective Perceptual Model: Enhancing Communication Quality For Persons With Pimd, Jadin Tredup

UNLV Theses, Dissertations, Professional Papers, and Capstones

Methods for prolonged compassionate care for persons with Profound Intellectual and Multiple Disabilities (PIMD) require a rotating cast of import people in the subjects life in order to facilitate interaction with the external environment. As subjects continue to age, dependency on these people increases with complexity of communications while the quality of communication decreases. It is theorized that a machine learning (ML) system could replicate the attuning process and replace these people to promote independence. This thesis extends this idea to develop a conceptual and formal model and system prototype.

The main contributions of this thesis are: (1) proposal of …

Quantifying Iron Overload Using Mri, Active Contours, And Convolutional Neural Networks, Andrea Sajewski, Stacey Levine

Undergraduate Research and Scholarship Symposium

Iron overload, a complication of repeated blood transfusions, can cause tissue damage and organ failure. The body has no regulatory mechanism to excrete excess iron, so iron overload must be closely monitored to guide therapy and measure treatment response. The concentration of iron in the liver is a reliable marker for total body iron content and is now measured noninvasively with magnetic resonance imaging (MRI). MRI produces a diagnostic image by measuring the signals emitted from the body in the presence of a constant magnetic field and radiofrequency pulses. At each pixel, the signal decay constant, T2*, can be calculated, …

Abso2luteu-Net: Tissue Oxygenation Calculation Using Photoacoustic Imaging And Convolutional Neural Networks, Kevin Hoffer-Hawlik, Geoffrey P. Luke

ENGS 88 Honors Thesis (AB Students)

Photoacoustic (PA) imaging uses incident light to generate ultrasound signals within tissues. Using PA imaging to accurately measure hemoglobin concentration and calculate oxygenation (sO₂) requires prior tissue knowledge and costly computational methods. However, this thesis shows that machine learning algorithms can accurately and quickly estimate sO₂. absO₂luteU-Net, a convolutional neural network, was trained on Monte Carlo simulated multispectral PA data and predicted sO₂ with higher accuracy compared to simple linear unmixing, suggesting machine learning can solve the fluence estimation problem. This project was funded by the Kaminsky Family Fund and the Neukom Institute.

Relaxed Mental State Detection Using The Emotiv Epoc And Adaptive Threshold Algorithms, Olin L. Anderson

EWU Masters Thesis Collection

The electroencephalogram (EEG) has proven to be useful in a wide variety of applications, including: diagnosis of mental disorders, psychological research, neurofeedback, and brain-computer interfacing. Most such applications of the EEG benefit from an ability to automatically detect when the subject is in a relaxed state. Recently, inexpensive and relatively easy to use EEG systems, with multiple electrodes, have become available at prices comparable to cellular phones or game machines. This project’s purpose is to investigate the feasibility of real-time classification of a subject's relaxation state using one such consumer-grade EEG system, the Emotiv Epoc. The subject's state is classified …

A Survey Of Attention Deficit Hyperactivity Disorder Identification Using Psychophysiological Data, S. De Silva, S. Dayarathna, G. Ariyarathne, D. Meedeniya, Sampath Jayarathna

Computer Science Faculty Publications

Attention Deficit Hyperactivity Disorder (ADHD) is one of the most common neurological disorders among children, that affects different areas in the brain that allows executing certain functionalities. This may lead to a variety of impairments such as difficulties in paying attention or focusing, controlling impulsive behaviours and overreacting. The continuous symptoms may have a severe impact in the long-term. This paper explores the ADHD identification studies using eye movement data and functional Magnetic Resonance Imaging (fMRI). This study discusses different machine learning techniques, existing models and analyses the existing literature. We have identified the current challenges and possible future directions …

End-To-End Learning Via A Convolutional Neural Network For Cancer Cell Line Classification, Darlington A. Akogo, Xavier-Lewis Palmer

Electrical & Computer Engineering Faculty Publications

Purpose: Computer vision for automated analysis of cells and tissues usually include extracting features from images before analyzing such features via various machine learning and machine vision algorithms. The purpose of this work is to explore and demonstrate the ability of a Convolutional Neural Network (CNN) to classify cells pictured via brightfield microscopy without the need of any feature extraction, using a minimum of images, improving work-flows that involve cancer cell identification.

Design/methodology/approach: The methodology involved a quantitative measure of the performance of a Convolutional Neural Network in distinguishing between two cancer lines. In their approach, they trained, validated and …

Applications Of Machine Learning In Nuclear Imaging And Radiation Detection, Shaikat Mahmood Galib

Doctoral Dissertations

"The main focus of this work is to use machine learning and data mining techniques to address some challenging problems that arise from nuclear data. Specifically, two problem areas are discussed: nuclear imaging and radiation detection. The techniques to approach these problems are primarily based on a variant of Artificial Neural Network (ANN) called Convolutional Neural Network (CNN), which is one of the most popular forms of 'deep learning' technique.

The first problem is about interpreting and analyzing 3D medical radiation images automatically. A method is developed to identify and quantify deformable image registration (DIR) errors from lung CT scans …