Biomedical Engineering and Bioengineering Commons^™

Manual Preparation Of Eyeglasses Based On Corneal Topographical Images For Keratoconus Patients, Bassma Sabah Majeed, Faiz F. Mustafa, Nebras H. Ghaeb

Al-Esraa University College Journal for Engineering Sciences

keratoconus (KCN) is a non-inflammatory, progressive thinning process of the cornea. It is considered one of the advanced biomechanical changes on the corneal surface, and methods of treatment in late cases are special designed contact lenses or surgical intervention. The objective of this paper is to customize the standard eyeglass lens in a way so that it fits with the abnormal shape and changes of the surface of the cornea of a patient suffering from KCN disease.The proposed method here, based on manual scratching of the external surface of the standard eyeglass lens under supervising of an expert optometrist, where …

Age-Friendly Educational Buildings Primary Schools In Kerbala - A Case Study, Anwar Fadhil Hussein, Ibrahim Jawad Kadhim

Al-Esraa University College Journal for Engineering Sciences

The concept of age-friendly societies has gained international attention among researchers, policy makers, and community organizations since the World Health Organization launched the Friendly Communities Project in 2006, to address challenges in some countries, as these challenges affect all aspects of society, and the educational environment represents an important joint of those joints, being the environment that is the most effective and influential in shaping human behavior. The age stage that is most affected and capable of learning and shaping behavior is of importance, which is the childhood stage. Therefore, the research focused on school buildings, as they represent an …

The Role Of Enhancing Interaction With The Natural Environment In Achieving Social Interaction For Children In Orphanage Institutions, Shamael M. W. Al Dabbagh, Zainab Khalid Rashad Al Khafaji

Al-Esraa University College Journal for Engineering Sciences

The child deprived of family care is considered the child most in need of attention and care. When the orphan child enters a new environment for him, it is obvious that he feels alienated, isolated, and loses the sense of interaction and communication with society. The research sees the possibility of mitigating this feeling by enhancing interaction with the natural environment within the internal spaces of the orphanage building and at the neighborhood level. In order to solve the research problem, the research adopted a hypothesis stating that "interaction with the natural environment enhances the achievement of social interaction for …

The Role Of Academic Competitions In Promoting Architectural Education: Tamayouze Excellence Award In Iraqi Architectural Education - Case Study, Nairy Mugardich Krikor, Anwar Subhi Ramadan

Al-Esraa University College Journal for Engineering Sciences

The importance of architectural competitions has emerged in finding the best designs, upgrading and architectural advancement in both practice and thinking. Architectural competitions have become intellectual meetings that contribute to stimulating self-learning and encouraging creativity. They act as an educational tool that leads to competition, giving motivation to the development of skills and learning, in a way that enhances the integration between architectural theory and practical practice for both engineers and architecture students. The research was concerned with studying the effective role of academic competitions in architectural education as one of the ways to improve teaching and learning, and to …

Analysis And Mitigation Of Cyber-Attacks Targeting Infrastructures Operated By Iot Systems, Raja Salih Mohammed Hasan, Nadia Mahmood Ali, Ihsan Jabbar Hasan

Al-Esraa University College Journal for Engineering Sciences

Numerous countries have a high impact on providing the planet with critical infrastructures offering very important services employed in different fields such as water resources management, public services, power grids, telecoms, commercials, and transportation. The increasing solutions in IoT systems made it possible to exploit internet connection services for supporting the critical infrastructures. The latest are being targeted by various types of cyber-attacks due to the advancement in internet services. Therefore, improving the security systems and the ways to detect the threats is highly required. Meanwhile, protecting the critical infrastructures from hostile cyber-attacks is of high significance. This article examines …

Reliability Assessment Model Of Network Operating System Based On Convolution Neural Network, Jamal N. Hasoon, Sarah S. Qasim, Mohammed A. Alshomali, Jane J. Stephan

Al-Esraa University College Journal for Engineering Sciences

The paper's subject is one of the points of fundamental significance in improving the development of complex computer systems is the effect of errors since their probability of occurrence in a widely distributed system is exceptionally high. Thus, the computer system must be dependable and provide comprehensive support for fault tolerance, fault detection, signal recovery mechanisms, failure prediction, etc. The goal is to develop a way to evaluate the reliability of the Red Hat Linux operating system utilizing data sets of system failures obtained from system injection with error reports using the Fault Injection Benchmarking and Reliability) FIBR( (for a …

Investing Traditional Architecture That Fulfills The Supreme Human Needs With Its Spiritual Dimension In Reconstruction / The Architecture Of Old Mosul City, A Case Study, Sinan Mohammad Talee Al-Saffar, Anwar Subhi Ramdan Al - Qaraghuli

Al-Esraa University College Journal for Engineering Sciences

Architecture has sought since time immemorial to meet multiple human needs, starting from the basic physiological needs for human survival, psychological needs (social and individual) to needs related to human progress, such as taking into account the aesthetic and spiritual aspects, which represent the highest levels of those needs, through a set of design aspects and characteristics. This research is based on the study of the spiritual dimension of higher human needs in general that architecture seeks to meet, by studying that in the architecture of traditional cities, in particular, to enhance architectural knowledge with regard to the importance of …

The Role Of Algorithms In Formulating The Architectural Formation, Ghada Ghalib Abdul Wahab, Younis Mahmood M. Salem

Al-Esraa University College Journal for Engineering Sciences

Algorithms are mathematical processes that provide step-by-step instructions for solving a specific problem. They are commonly used in computer science and other technical fields to automate processes and solve complex problems. One great application of algorithms is the generation of shapes. Algorithms can be used to create complex shapes and patterns that are difficult or impossible to create manually. We will explore how algorithms can be used as a mechanism to generate shapes by adopting the Voronoi algorithm because it provides a wide environment for creativity through new intellectual processes that may not occur at all in the human mind …

The Detection Of Android Malwares Using The Features Selection Technique, Farah Rafid Salman, Amer Abdulmajeed Abdulrahman

Al-Esraa University College Journal for Engineering Sciences

The use of Android smartphones has been rising quickly as Internet-based services gain more popularity and develop. The Android operating system's enormous popularity has drawn malware attacks on these devices. It is difficult and ineffective to detect malware versions with features that modify their behavior in order to avoid detection by machine learning (ML) techniques. Effective feature selection plays a crucial role in detecting malware characteristics and reduces the dimensionality of a large dataset by removing unnecessary features that are not useful and keeping those relevant features that increase classification accuracy and detection rate. This helps to solve the problems …

A Review Of Polymer – Particles Composite Materials, Ismail Ibrahim Marhoon, Ayad Abbood Abdul Al-Hassan, Mohammed Ali Abdulrehman

Al-Esraa University College Journal for Engineering Sciences

In several engineering applications traditional materials are replacedby composite materials. Filled composite materials consist of the continuousmatrix and the filling particles. The primary purpose of introducing inorganicsolid particles into polymers is to essentially increase mechanical and physicalproperties. The wear properties of polymer composite can be changed to agreater degree by modifying the process of preparing the filled compositematerials. In the present review, a large-scale research has been conductedon the effect of wear on the composites of polymers. The effect of filler onthe polymer composites wear behavior has been thoroughly explained

Ability Of Replacing The Steel Strands By Cfrp In Pre-Stressed Concrete Girders: Art Review, Ahmed Salim Edan, Wael Shawky Abdulsahib

Al-Esraa University College Journal for Engineering Sciences

Fiber-reinforced polymer (FRP) composites are the modern,trustworthy alternatives to steel tendons and rebars. The bulk of currentresearch is devoted to establishing the feasibility of incorporating carbonfibre-reinforced polymer (CFRP) into reinforced concrete girders byevaluating the strength and reliability of CFRP and concrete components.In order to improve fatigue and corrosion resistance, CFRPs are crucial.Comparing reinforced prestressed concrete bridge girders strengthenedwith conventional steel reinforcement to those reinforced with CFRPs offersthe possibility of greatly increasing service life. Also widely researchedand used in bridge engineering as a corrosion-resistant substitute for steelreinforcement is CFRP composite material. The use of carbon fiber-reinforcedplastic (CFRP) reinforcement for prestressing concrete …

A Review Article On The Performance Based Seismic Design Of Structures, Reem Hatem Ahmed, Sahar Elaiwi, Shelan Hameed Ameen

Al-Esraa University College Journal for Engineering Sciences

For the most part, seismic design builds complex structural systems using the same small number of essential structural components as non-seismic design projects. Based on the building regulations, structures are frequently designed to "withstand" the largest earthquake with a given likelihood that is projected to happen at their location. This means that by avoiding structures from collapsing, the number of fatalities must be maintained to a minimal. Seismic design involves knowing the many failure modes regarding a structure and giving it the right stiffness, strength, ductility, and layout for ensuring that these modes do not take place. In this essay, …

Adaptive Octree Meshes For Simulation Of Extracellular Electrophysiology, Christopher Bc Girard, Dong Song

Engineering Faculty Articles and Research

Objective. The interaction between neural tissues and artificial electrodes is crucial for understanding and advancing neuroscientific research and therapeutic applications. However, accurately modeling this space around the neurons rapidly increases the computational complexity of neural simulations. Approach. This study demonstrates a dynamically adaptive simulation method that greatly accelerates computation by adjusting spatial resolution of the simulation as needed. Use of an octree structure for the mesh, in combination with the admittance method for discretizing conductivity, provides both accurate approximation and ease of modification on-the-fly. Main results. In tests of both local field potential estimation and multi-electrode stimulation, dynamically adapted meshes …

List Of 121 Papers Citing One Or More Skin Lesion Image Datasets, Neda Alipour

Other resources

No abstract provided.

Characterization And Estimation Of Musculoskeletal Pain Using Machine Learning, Boluwatife Faremi

Master's Theses

Traditional scales utilized for recording pain are known to be highly subjective and biased due to inaccuracies in recollecting actual pain intensities. As a result, machine learning (ML) models that are trained using these scores as ground truth are reported to have low performance for objective pain classification because of the huge disparity between what was felt in moments of pain and the scores recorded afterward.

In the present study, two devices were designed for gathering real-time, continuous in-session subjective pain scores and the recording of the autonomic nervous system (ANS) altered endodermal (EDA) activity. 24 participants were recruited to …

Dreamtemp: A Platform For Sleep Monitoring And Improvement, Michelle Lim, Kyle Pedersen, Will Cockrum

Interdisciplinary Design Senior Theses

With 70 million Americans suffering from chronic sleep disorders and only 7500 board-certified sleep physicians, a clear logistical problem exists that technological solutions may be able to address. The proliferation of IoT devices in homes and on our person presents a unique opportunity to improve sleep quality by leveraging the data they produce, and the control they provide to us over our everyday lives. DreamTemp is a platform for sleep monitoring and improvement that aims to improve an individual’s quality of sleep by dynamically adjusting the room temperature based on the user’s sleep cycle using a smart wearable and thermostat. …

Unveiling Pain: Wearables For Objective Pain Measurement, Hanqing Tang

Masters Theses

">">Pain perception is a subjective experience that differs significantly among individuals, often leading to inconsistencies in assessment and management. A critical issue within this context is the gender bias in pain evaluation, which contributes to unequal treatment and perpetuates gender inequality within the healthcare system. This thesis presents an in-depth investigation of the problem and proposes the development of a wearable device for objective pain assessment. Physiological parameters — Electrocardiography (ECG) can be collected from cardiac sound signals auscultated by fabrics via nanometre-scale vibrations. Machine learning methods can accurately classify heart rate and acute pain intensity of participants. …

Live Audiovisual Remote Assistance System (Laras) For Person With Visual Impairments, Zachary Frey, Nghia Vo, Varaha Maithreya, Tais Mota, Urvish Trivedi, Redwan Alqasemi, Rajiv Dubey

Florida Conference on Recent Advances in Robotics

According to "The World Report on Vision" by World Health Organization (WHO) [1], there are more than 2.2 billion people who have near or distant vision Impairments, out of which 36 million people are classified as entirely blind. This report also emphasizes the importance of social and communal support in enabling individuals with vision impairments to integrate into society and reach their full potential. While performing daily activities and navigating the environment, people with visual impairments (PVIs) often require direct or synchronous assistance [2]. Consequently, there is a growing need for automated solutions to assist in this regard. However, existing …

Breast Tissue Tumor Detection Using Microstrip Patch Antenna With Defected Ground Structure, Nihal F. F. Areed, Hamdi Ahmed El Mikati, Laila T. Rakha

Mansoura Engineering Journal

This work proposes a slotted microstrip patch antenna with an inset feed and defective ground structure (DGS). The proposed antenna is built with Roger-RT/5880 (Ԑr=2.2) as the substrate material for X-band application with a resonant frequency of 10 GHz. The proposed design has been simulated using Finite Element Method (FEM) and the results of bandwidth and gain read about 700MHz and 8dB; respectively. The suggested design is compared with previously published equivalent designs in light of the most recent research. The comparison reveal that that the suggested design with tuned dimensions offers higher gain and wider bandwidth than what has …

Wearable Sensor Gait Analysis For Fall Detection Using Deep Learning Methods, Haben Girmay Yhdego

Electrical & Computer Engineering Theses & Dissertations

World Health Organization (WHO) data show that around 684,000 people die from falls yearly, making it the second-highest mortality rate after traffic accidents [1]. Early detection of falls, followed by pneumatic protection, is one of the most effective means of ensuring the safety of the elderly. In light of the recent widespread adoption of wearable sensors, it has become increasingly critical that fall detection models are developed that can effectively process large and sequential sensor signal data. Several researchers have recently developed fall detection algorithms based on wearable sensor data. However, real-time fall detection remains challenging because of the wide …

Beirut Arab University - Faculty Of Engineering - Newsletter Issue 0, Faculty Of Engineering, Beirut Arab University

Engineering Newsletters

No abstract provided.

Metabolomic Differentiation Of Tumor Core And Edge In Glioma., Mary E. Baxter

Electronic Theses and Dissertations

Glioma is one of the most aggressive forms of brain cancer. It has been shown that the microenvironments differ significantly between the core and edge regions of glioma tumors. This study obtained metabolomic profiles of glioma core and edge regions using paired glioma core and edge tissue samples from 27 human patients. Data was acquired by performing liquid-liquid metabolite extraction and 2DLC-MS/MS on the tissue samples. In addition, a boosted generalized linear machine learning model was employed to predict the metabolomic profiles associated with O-6-methylguanine-DNA methyltransferase (MGMT) promoter methylation.

A panel of 66 metabolites was found to be statistically significant …

Molecular And Cellular Level Characterization Of Cytoskeletal Mechanics Using A Quartz Crystal Microbalance, Emily M. Kerivan, Lyle Tobin, Mihir Basil, Dana N. Reinemann

Faculty and Student Publications

A quartz crystal microbalance (QCM) is an instrument that has the ability to measure nanogram-level changes in mass on a quartz sensor and is traditionally used to probe surface interactions and assembly kinetics of synthetic systems. The addition of dissipation monitoring (QCM-D) facilitates the study of viscoelastic systems, such as those relevant to molecular and cellular mechanics. Due to real-time recording of frequency and dissipation changes and single protein-level precision, the QCM-D is effective in interrogating the viscoelastic properties of cell surfaces and in vitro cellular components. However, few studies focus on the application of this instrument to cytoskeletal systems, …

Gesture-Based American Sign Language (Asl) Translation System, Kayleigh Moore, Stefano Pecile, Mahdi Yazdanpour

Posters-at-the-Capitol

According to the World Health Organization (WHO), over 5% of the world's population experiences severe hearing loss. Approximately 9 million people in the U.S. are either functionally deaf or have mild-to-severe hearing loss. In this research, we designed and implemented a translation interface which turns American Sign Language (ASL) gestures captured from a pair of soft robotic gloves into text and speech instantaneously.

We used a combination of flex sensors, tactile sensors, and accelerometers to recognize hand gestures and to record hand and fingers positions, movements, and orientations. The digitized captured gestures were then sent to our proposed translation interface …

Use Of Bioheat Modeling To Characterize And Optimize Implantable Medical Devices And Neuromodulation Technologies, Adantchede Louis Zannou

Dissertations and Theses

Medical device development includes prototyping, benchtop characterization, preclinical studies, and clinical trials. Understanding the limitations and potential adverse effects of medical devices prior to their administration in humans is a crucial first step. Optimizing medical devices is essential to employing technology and improving patients care. Computational modeling is widely adopted as a powerful tool to predict stimulation/recording parameter optimization, rapid electrode/device prototyping, investigating novel mechanism of action, and testing working principles of any medical devices. Many implantable neuromodulation technologies including Spinal Cord Stimulation (SCS), which provide substantial therapeutic benefit for patient population with lower back pain, produces heat via the …

Experimental Evaluation Of Micro-Epidermal Actuators On Flexible Substrates, Courtney D. Bradley

Graduate Research Theses & Dissertations

Does embedding actuators in a flexible substrate increase their performance in hearing aids? What are the differences in damping experienced by actuators of different diameters and at different locations? At what frequency is peak acceleration achieved and what role does the size of the actuator and embedding it in a flexible substrate play? These questions will form the basis of this thesis. This work was done to develop a small non-invasive Band-Aid-©-like hearing aid. The novelty of this device requires a detailed analysis of piezoelectric actuators. This is a continuation of past students’ work on the topic. The main parameters …

Does Self-View Mode Generate Video Conferencing Fatigue? An Experiment Using Eeg Signals, Jin Xu, Eoin Whelan, Ann O'Brien, Denis O’Hora

Conference papers

The ability to see or hide one’s own image is a typical feature of video conferencing platforms. This study will conduct an EEG-based neurobiological experiment to determine if the self-view mode generates video conference fatigue and if this differs between males and females. 40 volunteers will participate in a simulated video conference meeting with the self-view mode on and off at different times. In addition, an EEG-based fatigue monitor will be proposed to demonstrate the level of human mental fatigue. The experimental insights will provide direct biological evidence of the impact of video conferencing features on the user experience and …

Design And Fabrication Of A Force-Displacement Control Mechanism For Bone-Surgical Tool Testing, Kenneth Nwagu

College of Graduate Studies: Theses & Dissertations

This project focuses on the design and fabrication of an experimental setup for orthopedic-tool testing, tailored for a surgical instrumentation company. The multifaceted project encompasses a literature review, conceptual design, prototyping, and rigorous testing, resulting in a versatile control system capable of assessing various orthopedic tools, including bone drills, saws, burrs, and power handpieces.

Orthopedic surgical procedures (which include cutting and/or drilling into bone) often need to be performed on bones for faster recovery. The drilling and cutting process can cause an increase in temperature at the cutting site which can cause bone necrosis. The tools also need to be …

Machine Learning And Deep Learning Approaches For Gene Regulatory Network Inference In Plant Species, Sai Teja Mummadi

Dissertations, Master's Theses and Master's Reports

The construction of gene regulatory networks (GRNs) is vital for understanding the regulation of metabolic pathways, biological processes, and complex traits during plant growth and responses to environmental cues and stresses. The increasing availability of public databases has facilitated the development of numerous methods for inferring gene regulatory relationships between transcription factors and their targets. However, there is limited research on supervised learning techniques that utilize available regulatory relationships of plant species in public databases.

This study investigates the potential of machine learning (ML), deep learning (DL), and hybrid approaches for constructing GRNs in plant species, specifically Arabidopsis thaliana, …

Improving Detection And Classification Of Steady-State Visual Evoked Potentials In Brain-Computer Interfaces, Hadi Habibzadeh

Legacy Theses & Dissertations (2009 - 2024)

Brain-computer interfaces (BCIs) provide an alternative communication channel to send computer commands without requiring any voluntary muscle control. They benefit people with limited communication capabilities due to motor function deficits, spinal cord injuries, and neurological disorders. They may also have applications for healthy individuals.