Biomedical Engineering and Bioengineering Commons^™

Automatic Detection Of Polypoid Skin Lesions: The Squash Sign, Saurabh G. Karnik

Masters Theses

“Earlier detection of malignant melanoma can save lives. Automatic in-vivo methods of melanoma detection including smart-phone applications are now available, but specificity is low, i.e. too many benign lesions are detected as possible melanomas. Polypoids, elevated and rounded lesions are one class of benign lesions. These raised lesions with piecewise circular borders, predominantly intradermal nevi and cutaneous polyps (IDNs), are always benign. Variegated coloring present in polypoid lesions can lead physicians to perform an unneeded biopsy. Contact dermatoscope plates with gel squash these lesions, leaving a “squash sign” marker of benignancy which can be automatically detected. We present a method …

Evaluating And Training Intraoperative Analysis Of The Mitral Valve, Neil A. Tenenholtz

Link Foundation Modeling, Simulation and Training Fellowship Reports

Mitral valve repair is the recommended method of treating valve incompetency. However, the procedure is quite difficult and, as a result, underperformed due to surgeon’s need to predict the closed valve shape of the patient’s arrested heart. While the interactive process of predicting closed valve shape is achieved by physically manipulating valve tissue (known as valve analysis), surgical training consists of traditional, non-interactive pedagogy (e.g., book-based learning and lectures) followed by an apprenticeship model where the trainee is gradually given hands-on experience, resulting in post-medical school training that is often 10 years or greater. The continuing education of practicing cardiac …

A Wireless And Digital Electrode Bus Topology For Biopotential Measurement, Mark Nolan, Edward Burke, Eugene Coyle

Conference Papers

The conventional biopotential measurement configuration utilises long lead wires which connect measuring electrodes to signal conditioning circuitry. The majority of bioelectric signals that are measured from the human body have a tiny signal amplitude (5µV-5mV range) and thus any interference that is induced on the lead wires can have a detrimental effect on the original signal. In this paper, we present an alternative configuration, in which digitisation occurs on the electrode, potentially providing enhanced signal measurement as well as significant benefits in terms of the simplification of the physical interconnections between electrodes. Multiple electrodes are combined to form a digital …

Improvement Of Statistical Process Control At St. Jude Medical's Cardiac Manufacturing Facility, Christopher Lance Edwards

Master's Theses

Sig sigma is a methodology where companies strive to reproduce results ending up having a 99.9996% chance their product will be void of defects. In order for companies to reach six sigma, statistical process control (SPC) needs to be introduced. SPC has many different tools associated with it, control charts being one of them. Control charts play a vital role in managing how a process is behaving. Control charts allow users to identify special causes, or shifts, and can therefore change the process to keep producing good products, free of defects.

There are many factories and manufacturing facilities having implemented …

Polygrasp: Reach; Myoelectric Prosthetic Hand Iteration, Devon Patrick Augustus, Mighells Blaed Deuel, Ian Noel Fraser, Nicholas Philip Moesser

Mechanical Engineering

Amputations are a common occurrence in soldiers returning home who have suffered the effects of IED and munitions explosions. For upper limb amputees, trans-radial amputations are the most common. Traditional hook devices do not offer an adequate level of normalcy for users, prompting the use of myoelectric devices. While current myoelectric devices do offer a more natural experience, they come with a host of other problems that makes their adoption by service personnel not desirable or not permitted by the VA. PolyGrasp Reach seeks to reduce weight and cost and improve performance. This addresses several of the issues with devices …

The Presence Of Regional Accents In Electrolarynx Speech And The Resultant Effect On Overall Intelligibility., Brian Madden, Eugene Coyle

Conference Papers

During voiced speech, the larynx provides quasi-periodic acoustic excitation of the vocal tract. In most electrolarynxes, mechanical vibrations are produced by a linear electromechanical actuator, the armature of which percusses against a metal or plastic plate at a frequency within the range of glottal excitation. In this paper, a phonological analysis of a section of results from an online perceptual intelligibility test was performed which compared speech produced using a novel hands-free electrolarynx and a commercially available electrolarynx. A portion of the test consisted of a closed-set format containing a selection of four sets of four random CVC audio samples …

Image-Guided Robotic Dental Implantation With Natural-Root-Formed Implants, Xiaoyan Sun

Electrical & Computer Engineering Theses & Dissertations

Dental implantation is now recognized as the standard of the care for tooth replacement. Although many studies show high short term survival rates greater than 95%, long term studies (> 5 years) have shown success rates as low as 41.9%. Reasons affecting the long term success rates might include surgical factors such as limited accuracy of implant placement, lack of spacing controls, and overheating during the placement.

In this dissertation, a comprehensive solution for improving the outcome of current dental implantation is presented, which includes computer-aided preoperative planning for better visualization of patient-specific information and automated robotic site-preparation for superior …

Techniques For Sensor-Integrated Robotic Systems: Raman Spectra Analysis, Image Guidance, And Kinematic Calibration, Luke Anthony Reisner

Wayne State University Dissertations

Robotics and sensor technology have made impressive advancements over the years. There are now robotic systems that help perform surgeries or explore the surface of Mars, and there are sensors that detect trace amounts of explosives or identify diseased human tissue. The most powerful systems integrate robots and sensors, which are natural complements to each other. Sensors can provide information that might otherwise be unavailable due to indirect robotic manipulation (e.g., images of the target environment), and robots can provide suitably precise positioning of an analytical sensor.

To have an effective sensor-integrated robotic system, multiple capabilities are needed in the …

A Novel Telecommunications-Based Approach To Mathematical Modeling Of Hiv Infection, Aaron T. Sharp

Department of Computer Electronics and Engineering: Dissertations, Theses, and Student Research

It is well known that biological systems utilize communication in some form, one prolific example of this is the propagation of HIV (Human Immunodeficiency Virus) in the human body. By modeling HIV infection as a communication system, we hope to gain a unique insight into HIV and biological communication systems in general. Such a model would provide researchers a platform for experimenting and simulating various biological communication systems. We have previously developed a layered communication protocol for interpreting biological communication systems using telecommunications paradigms and will apply said model to HIV proliferation. We will also demonstrate the effectiveness of the …

Automation Of Orthodontic Wire Tester For Performing Three Point Bending Tests, Adithya Venkatesan

Master's Theses

Abstract

Understanding the biomechanical factors in orthodontics is important in order to improve the overall effectiveness of actual clinical treatment. An accurate method to study the threedimensional (3D) force systems and the resulting movements of teeth during orthodontic treatment is needed along with the understanding of the material properties of any orthodontic wire. Until recently, most of the orthodontic biomechanics literature was limited to twodimensional experimental studies. Recent advances in threedimensional computer modeling have also been developed but have been limited to the manual control of tooth movement. Overall, there is very little published evidence in the literature on the …

A Study On Facility Planning Using Discrete Event Simulation: Case Study Of A Grain Delivery Terminal, Sarah M. Asio

Department of Industrial and Management Systems Engineering: Dissertations, Theses, and Student Research

The application of traditional approaches to the design of efficient facilities can be tedious and time consuming when uncertainty and a number of constraints exist. Queuing models and mathematical programming techniques are not able to capture the complex interaction between resources, the environment and space constraints for dynamic stochastic processes. In the following study discrete event simulation is applied to the facility planning process for a grain delivery terminal. The discrete event simulation approach has been applied to studies such as capacity planning and facility layout for a gasoline station and evaluating the resource requirements for a manufacturing facility. To …

Cyberknife Radiation Modeling: Effects Of Relaxed Translational And Rotational Constraints On Healthy Tissue Irradiation, Sudha Bhavaroop Potineni

Electrical & Computer Engineering Theses & Dissertations

The Cyberknife system is a robotic radio surgery instrument that is used to treat cancers in different parts of the human body. Because of its accuracy and precision, it has become one of the best radio surgery systems in the world. However, even with Cyberknife the treatment time for one session takes from 30 minutes up to 120 minutes depending on the size, shape, and position of the tumor in the human body. In this research, a solution is presented to aid in reducing this long treatment time. An algorithm is developed which simulates the amount of the healthy tissue …

Detection Of Breathing And Infant Sleep Apnea, Brian Berg

Computer Engineering

Sleep apnea is a condition where people pause while breathing in their sleep; this can be of great concern for infants and premature babies. Current monitoring systems either require physical attachment to a user or may be unreliable. This project is meant to develop a device that can accurately detect breathing through sound and issue appropriate warnings upon its cessation. The device produced is meant to be a standalone device and thus was developed as an embedded systems project on a Xilinx Spartan 6 FPGA.

Universal Engineering Programmer – An In-House Development Tool For Developing And Testing Implantable Medical Devices In St. Jude Medical, Khoa Tat Do

Master's Theses

During development and testing of the functionality of the pacemaker and defibrillator device, engineers in the St. Jude Medical Cardiac Rhythm Management Division use an in-house development tool called Universal Engineering Programmer (UEP) to ensure the device functions as expected, before it can be used to test on an animal or a human during the implantation process.  In addition, some applications of UEP are incorporated into the official releases of the device product.  UEP has been developed and used by engineers across departments in the St. Jude Medical Cardiac Rhythm Management Division (CRMD).  This thesis covers the flexible and reusable …

Intelligibility Of Electrolarynx Speech Using A Novel Hands-Free Actuator, Brian Madden, Mark Nolan, Ted Burke, James Condron, Eugene Coyle

Conference Papers

During voiced speech, the larynx provides quasi-periodic acoustic excitation of the vocal tract. In most electrolarynxes, mechanical vibrations are produced by a linear electromechanical actuator, the armature of which percusses against a metal or plastic plate at a frequency within the range of glottal excitation. In this paper, the intelligibility of speech produced using a novel hands-free actuator is compared to speech produced using a conventional electrolarynx. Two able-bodied speakers (one male, one female) performed a closed response test containing 28 monosyllabic words, once using a conventional electrolarynx and a second time using the novel design. The resulting audio recordings …

Augmented Control Of A Hands-Free Electrolarynx, Brian Madden, James Condron, Eugene Coyle

Conference Papers

During voiced speech, the larynx acts as the sound source, providing a quasi-periodic excitation of the vocal tract. Following a total laryngectomy, some people speak using an electrolarynx which employs an electromechanical actuator to perform the excitatory function of the absent larynx. Drawbacks of conventional electrolarynx designs include the monotonic sound emitted, the need for a free-hand to operate the device, and the difficulty experienced by many laryngectomees in adapting to its use. One improvement to the electrolarynx, which clinicians and users frequently suggest, is the provision of a convenient hands-free control facility. This would allow more natural use of …

Robotic Testing Of Proximal Tibio-Fibular Joint Kinematics For Measuring Instability Following Total Knee Arthroplasty, Wael K. Barsoum, Ho H. Lee, Trevor G. Murray, Robb Colbrunn, Alison K. Klika, S. Butler, Antonie J. Van Den Bogert

Mechanical Engineering Faculty Publications

Pain secondary to instability in total knee arthroplasty (TKA) has been shown to be major cause of early failure. In this study, we focused on the effect of instability in TKA on the proximal tibio-fibular joint (PTFJ). We used a robotics model to compare the biomechanics of the PTFJ in the native knee, an appropriately balanced TKA, and an unbalanced TKA. The tibia (n = 5) was mounted to a six-degree-of-freedom force/torque sensor and the femur was moved by a robotic manipulator. Motion at the PTFJ was recorded with a high-resolution digital camera system. After establishing a neutral position, …

On Improving Electrooculogram-Based Computer Mouse Systems: The Accelerometer Trigger, Johnalan Keegan, Edward Burke, James Condron, Eugene Coyle

Conference Papers

Eye tracking is a well-established method of computer control for profoundly paralysed people (Anson et al., 2002). Cameras are commonly used to track eye movements (Morimoto et al., 2005) but one alternative is the bioelectrical signal known as the electrooculogram (EOG). There are some EOG mouse control systems that facilitate the use of GUI applications, but certain actions, which are straightforward using a conventional mouse, remain impossible. Unless the eyes are tracking a target, they move in saccades (jumps), making it impossible to voluntarily trace out smooth trajectories with one's gaze, as would be required to draw a smooth curve. …

Nonlinear Control Strategy For A Cost Effective Myoelectric Prosthetic Hand, Cristian Federico Pasluosta

Doctoral Dissertations

The loss of a limb tremendously impacts the life of the affected individual. In the past decades, researchers have been developing artificial limbs that may return some of the missing functions and cosmetics. However, the development of dexterous mechanisms capable of mimicking the function of the human hand is a complex venture. Even though myoelectric prostheses have advanced, several issues remain to be solved before an artificial limb may be comparable to its human counterpart. Moreover, the high cost of advanced limbs prevents their widespread use among the low-income population.

This dissertation presents a strategy for the low-level of control …

Informatics And Natural Computation: Final Report, Francis T. Marchese

Cornerstone 3 Reports : Interdisciplinary Informatics

The purpose of this grant is to develop an interdisciplinary course in Informatics and Natural Computation that would service undergraduate computer, natural, and physical science majors. Informatics is the science of information, the practice of information processing, and the engineering of information systems. Informatics studies the structure, algorithms, behavior, and interactions of natural and artificial systems that store, process, access and communicate information. Natural computing refers to a collection of disciplines that unite nature with computing in three distinct ways:

1. Nature serves as a source of inspiration for the development of computational tools or systems that are used for …

Bi-Planar Postural Stability Model: Fitting Parameters To Patient Data Automatically, Andrew Michael Sovol

Master's Theses (2009 -)

Studies of children with cerebral palsy (CP) have shown that maintaining control of posture in quiet standing is often difficult. Physical therapy and assistive devices, both with or without surgery, may be employed in an effort to improve postural stability. Assessing the effectiveness of such interventions is important for healthcare providers and their patients. A previously created bi-planar model of posture control has been further developed as a method of assessment. This MATLAB and Simulink model has successfully replicated experimental results for typical adults and children, as well as children with CP across three different test conditions: eyes open, eyes …

Towards Supervised Autonomous Task Completion Using An In Vivo Surgical Robot, Jason J. Dumpert

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

Laparoscopy is a minimally invasive alternative to traditional abdominal surgery. Unlike traditional surgery, a laparoscopic procedure can be completed using small incisions. The use of these small incision results in reduced pain to the patient, shorter recovery times, and less trauma to skin, muscle and other tissues. However, these benefits to the patient are offset by the increased difficulty to the surgeon performing the procedure. These difficulties include reduced dexterity, reduced perception, and longer procedure times. The use of small in vivo robotic devices in minimally invasive surgery is one possible solution to these problems. The movement of these devices …

An Investigation Of The Use Of A High Resolution Adc As A Digital Biopotential Amplifier, Damon Berry, Frank Duignan, Richard Hayes

Conference Papers

Sigma delta analogue to digital converters have been used in many signal processing applications including some commercially available systems for sampling of bio-signals Bio-potential amplifiers have traditionally utilised specialised highquality analogue components to amplify bio-signals.

The central aim of this work is to investigate the benefits of using high-resolution sigma delta conversion as a digital amplification stage in the signal path of a bio-potential amplifier. A number of system arrangements specific to bio-potential measurement are presented and discussed. These arrangements are designed to use the high resolution capacity of the sigma delta converter in different ways, providing different benefits. To …

A Mobile Ecg Monitoring System With Context Collection, Jin Peng Li, Damon Berry, Richard Hayes

Conference Papers

Preventative health management represents a shift from the traditional approach of reactive treatment-based healthcare towards a proactive wellness-management approach where patients are encouraged to stay healthy with expert support when they need it, at any location and any time. This work represents a step along the road towards proactive, preventative healthcare for cardiac patients. It seeks to develop a smart mobile ECG monitoring system that requests and records context information about what is happening around the subject when an arrhythmia event occurs. Context information about the subject’s activities of daily living will, it is hoped, provide an enriched data set …

Augmented Control Of Hands Free Voice Prostheses, Brian Madden, James Condron, Ted Burke, Eugene Coyle

Conference Papers

Laryngectomy patients often use an electrolarynx to facilitate speech following a tracheotomy. Devices of this type provide the most intelligible means of communication for tracheotomy patients. However, the electro-larynx has inherent drawbacks such as the buzzing monotonic sound emitted, the need for a free hand to operate the device, and the difficulty experienced by many tracheotomy patients in adapting to use it. The most effective means of addressing the shortcomings of existing electro-larynges is to provide the user with a hands-free facility. This allows the user to perform other manual tasks whilst speaking, or simply to communicate more effectively through …

Analysis Of Gait Characteristics In Mentally Handicapped Individuals, Prakriti Parijat, Jian Liu, Thurmon E. Lockhart, Courtney Haynes

Computer Sciences and Electrical Engineering Faculty Research

Physical and motor dysfunctions in mentally handicapped individuals predispose them to a higher risk of slip and fall accidents. It is estimated that over 60 million people are currently suffering with some level of developmentally related cognitive impairment (American Disability Act ADA, 2000). Mental retardation occurs in 2.5-3% of the general population. About 6-7.5 million mentally retarded individuals live in the United States alone (ADA, 2000). Slip induced fall accidents are a primary source of injury in people with mental retardation (MR). Often, the incidence of falls among this population is compounded by other disabilities such as autism, seizure, and …

Least Squares Support Vector Machine Based Classification Of Abnormalities In Brain Mr Images, S. Thamarai Selvi, D. Selvathi, R. Ramkumar, Henry Selvaraj

Electrical & Computer Engineering Faculty Research

The manual interpretation of MRI slices based on visual examination by radiologist/physician may lead to missing diagnosis when a large number of MRIs are analyzed. To avoid the human error, an automated intelligent classification system is proposed. This research paper proposes an intelligent classification technique to the problem of classifying four types of brain abnormalities viz. Metastases, Meningiomas, Gliomas, and Astrocytomas. The abnormalities are classified based on Two/Three/ Four class classification using statistical and textural features. In this work, classification techniques based on Least Squares Support Vector Machine (LS-SVM) using textural features computed from the MR images of patient are …

Electromagnetic Measurement Of Spinal Curvature, Ronan Fitzmaurice, Ted Burke, Annraoi De Paor

Conference Papers

In this paper, we describe an original mathematical technique for calculating the position and orientation of an electromagnetic coil from a minimum of four collinear magnetic field measurements. This problem arose in the development of a system for evaluating the efficacy of inflatable back rafts designed to mitigate complications that arise from the immobilisation of patients with suspected spinal injuries on spinal boards during transport to hospital. Electromagnetic markers are attached to points of interest on the back of an immobilised test subject. Spinal curvature is then measured by passing a magnetometer underneath the board.

Astronaut Eva Exposure Estimates From Cad Model Spacesuit Geometry, Giovanni De Angelis, Brooke M. Anderson, William Atwell, John E. Nealy, Gary D. Qualls, John W. Wilson

Mathematics & Statistics Faculty Publications

Ongoing assembly and maintenance activities at the International Space Station (ISS) require much more extravehicular activity (EVA) than did the earlier U.S. Space Shuttle missions. It is thus desirable to determine and analyze, and possibly foresee, as accurately as possible what radiation exposures crew members involved in EVAs will experience in order to minimize risks and to establish exposure limits that must not to be exceeded. A detailed CAD model of the U.S. Space Shuttle EVA Spacesuit, developed at NASA Langley Research Center (LaRC), is used to represent the directional shielding of an astronaut; it has detailed helmet and backpack …

A Method Of Analyzing Mandibular Movement, Richard B. Mccoy

Loma Linda University Electronic Theses, Dissertations & Projects

Mandibular movement is considered to be a fundamental factor in the study, analysis, and treatment of occlusion. For many years, dentists have realized that dental health depends upon the compatibility of mandibular movements and occlusion. This realization has led to the development of new methods and techniques for recording accurately and scientifically the movements of the mandible. In order for this data to be of scientific value, it must be stored in a usable form which is easily available for analysis.

The purpose of this research project was to develop a procedure for storing and recalling mandibular-movement information. Before such …