Biomedical Engineering and Bioengineering Commons^™

Impact Of Merging Basalt Fibers With Various Types Of Concrete And The Factors Affecting Them: A Review, Adil M. Jabbar, Lubna S. Dankha

Al-Esraa University College Journal for Engineering Sciences

This paper reviews effecting of blending basalt fibers into concreteon mechanical properties, ductility, and toughness. Based on concretecomponents, the perfect basalt fiber percentage can differ and is influencedby factors like fiber length, w/c ratio, and age. The beneficial basalt fiberspercentage is lower than that of steel fibers. Even with a low concentrationof basalt fibers, concrete tensile and flexural strength can be improved moreeffectively than a higher amount of steel fibers. As the amount of basaltfiber increases, the mix workability decreases. Additionally, the flow abilitymay drop slightly as the length of the fibers increases. Adding basalt fiber toconcrete can minimize drying …

Study Of Surface And Groundwater Quality And Quantity At Watershed Scale In Mississippi, Dipesh Nepal

Theses and Dissertations

Hydrology and water quality are affected by land use and climate changes. Mississippi’s diverse agro–ecosystem comprises of a range of land use land cover (LULC) including agriculture, forest, wetlands, urban, and grasslands. The objectives of this study were to investigate the impacts of various factors such as Best Management Practices (BMPs), wetlands, LULC, and climate changes on water quality and quantity. The hydrologic and water quality responses to dynamic LULC input in Soil and Water Assessment Tool (SWAT) were evaluated. Results showed that agricultural and forest expansion were major drivers of hydrologic and water quality changes in Big Sunflower River …

Exploring The Potential Of Tesla Valve For Filtering And Sorting Microscale Active Swimmers: A Computational Study, Ariel Rogers, Zhiyao He, Yong Wang

Physics Faculty Publications and Presentations

It is well-known that a Tesla valve allows fluids to flow unidirectionally without moving parts; however, how Tesla valves interact with active matters and the potential applications of Tesla valves in biology remain largely unexplored. Here, we present a computational study on the potential use of Tesla valves for filtering and sorting microscale active swimmers such as bacteria. We investigated the behavior of microscale swimmers passing through the Tesla valve at different linear and angular velocities using numerical simulations and quantified the diodicity of the Tesla valve for active swimmers. Our results demonstrate that the Tesla valve can effectively filter …

The Effects Of Engineering Summer Camps On Middle And High School Students’ Engineering Interest And Identity Formation: A Multi-Methods Study, Timothy Robinson, Adam Kirn, Jenny Amos, Indira Chatterjee

Journal of Pre-College Engineering Education Research (J-PEER)

This multi-methods study explores changes in engineering interest and identity of middle and high school students (n = 79) attending introductory-level engineering summer camps at a large western land grant university. Middle school is a critical time when student interest, identity, and subsequently career choice begin to emerge and hence it is important that at this age students are given accurate information about engineering majors in college and future career opportunities in engineering. Data were collected over a period of two years in six summer camps. Three separate populations of middle and high school students participated in the summer …

Effect Of Fire Flame On Some Mechanical Properties Of Self-Compacting Concrete, Haider Sadiq M. Ali, Nabeel A-M. Albayati, Basman R. Mohammed, Adil M. Jabbar

Al-Esraa University College Journal for Engineering Sciences

This paper presents an experimental investigation of the effect of fire flame on self-compacting concrete. The experimental program included casting cylinder and prism concrete specimens for compressive strength, modulus of elasticity, modulus of rupture, and concrete density tests. The specimens are exposed to fire flame at 800 ºC approximately for 2 hours or 6 hours. Then the specimens were cooled either in a fast or slow manner. Test results show that the compressive strength was reduced by about (54 - 61)% for fire exposure of 6 hours and by (27 - 37)% for 2 hours of exposure and cooled slowly …

Manual Preparation Of Eyeglasses Based On Corneal Topographical Images For Keratoconus Patients, Bassma Sabah Majeed, Faiz F. Mustafa, Nebras H. Ghaeb

Al-Esraa University College Journal for Engineering Sciences

keratoconus (KCN) is a non-inflammatory, progressive thinning process of the cornea. It is considered one of the advanced biomechanical changes on the corneal surface, and methods of treatment in late cases are special designed contact lenses or surgical intervention. The objective of this paper is to customize the standard eyeglass lens in a way so that it fits with the abnormal shape and changes of the surface of the cornea of a patient suffering from KCN disease.The proposed method here, based on manual scratching of the external surface of the standard eyeglass lens under supervising of an expert optometrist, where …

Age-Friendly Educational Buildings Primary Schools In Kerbala - A Case Study, Anwar Fadhil Hussein, Ibrahim Jawad Kadhim

Al-Esraa University College Journal for Engineering Sciences

The concept of age-friendly societies has gained international attention among researchers, policy makers, and community organizations since the World Health Organization launched the Friendly Communities Project in 2006, to address challenges in some countries, as these challenges affect all aspects of society, and the educational environment represents an important joint of those joints, being the environment that is the most effective and influential in shaping human behavior. The age stage that is most affected and capable of learning and shaping behavior is of importance, which is the childhood stage. Therefore, the research focused on school buildings, as they represent an …

The Role Of Enhancing Interaction With The Natural Environment In Achieving Social Interaction For Children In Orphanage Institutions, Shamael M. W. Al Dabbagh, Zainab Khalid Rashad Al Khafaji

Al-Esraa University College Journal for Engineering Sciences

The child deprived of family care is considered the child most in need of attention and care. When the orphan child enters a new environment for him, it is obvious that he feels alienated, isolated, and loses the sense of interaction and communication with society. The research sees the possibility of mitigating this feeling by enhancing interaction with the natural environment within the internal spaces of the orphanage building and at the neighborhood level. In order to solve the research problem, the research adopted a hypothesis stating that "interaction with the natural environment enhances the achievement of social interaction for …

The Role Of Academic Competitions In Promoting Architectural Education: Tamayouze Excellence Award In Iraqi Architectural Education - Case Study, Nairy Mugardich Krikor, Anwar Subhi Ramadan

Al-Esraa University College Journal for Engineering Sciences

The importance of architectural competitions has emerged in finding the best designs, upgrading and architectural advancement in both practice and thinking. Architectural competitions have become intellectual meetings that contribute to stimulating self-learning and encouraging creativity. They act as an educational tool that leads to competition, giving motivation to the development of skills and learning, in a way that enhances the integration between architectural theory and practical practice for both engineers and architecture students. The research was concerned with studying the effective role of academic competitions in architectural education as one of the ways to improve teaching and learning, and to …

Analysis And Mitigation Of Cyber-Attacks Targeting Infrastructures Operated By Iot Systems, Raja Salih Mohammed Hasan, Nadia Mahmood Ali, Ihsan Jabbar Hasan

Al-Esraa University College Journal for Engineering Sciences

Numerous countries have a high impact on providing the planet with critical infrastructures offering very important services employed in different fields such as water resources management, public services, power grids, telecoms, commercials, and transportation. The increasing solutions in IoT systems made it possible to exploit internet connection services for supporting the critical infrastructures. The latest are being targeted by various types of cyber-attacks due to the advancement in internet services. Therefore, improving the security systems and the ways to detect the threats is highly required. Meanwhile, protecting the critical infrastructures from hostile cyber-attacks is of high significance. This article examines …

Reliability Assessment Model Of Network Operating System Based On Convolution Neural Network, Jamal N. Hasoon, Sarah S. Qasim, Mohammed A. Alshomali, Jane J. Stephan

Al-Esraa University College Journal for Engineering Sciences

The paper's subject is one of the points of fundamental significance in improving the development of complex computer systems is the effect of errors since their probability of occurrence in a widely distributed system is exceptionally high. Thus, the computer system must be dependable and provide comprehensive support for fault tolerance, fault detection, signal recovery mechanisms, failure prediction, etc. The goal is to develop a way to evaluate the reliability of the Red Hat Linux operating system utilizing data sets of system failures obtained from system injection with error reports using the Fault Injection Benchmarking and Reliability) FIBR( (for a …

Investing Traditional Architecture That Fulfills The Supreme Human Needs With Its Spiritual Dimension In Reconstruction / The Architecture Of Old Mosul City, A Case Study, Sinan Mohammad Talee Al-Saffar, Anwar Subhi Ramdan Al - Qaraghuli

Al-Esraa University College Journal for Engineering Sciences

Architecture has sought since time immemorial to meet multiple human needs, starting from the basic physiological needs for human survival, psychological needs (social and individual) to needs related to human progress, such as taking into account the aesthetic and spiritual aspects, which represent the highest levels of those needs, through a set of design aspects and characteristics. This research is based on the study of the spiritual dimension of higher human needs in general that architecture seeks to meet, by studying that in the architecture of traditional cities, in particular, to enhance architectural knowledge with regard to the importance of …

The Role Of Algorithms In Formulating The Architectural Formation, Ghada Ghalib Abdul Wahab, Younis Mahmood M. Salem

Al-Esraa University College Journal for Engineering Sciences

Algorithms are mathematical processes that provide step-by-step instructions for solving a specific problem. They are commonly used in computer science and other technical fields to automate processes and solve complex problems. One great application of algorithms is the generation of shapes. Algorithms can be used to create complex shapes and patterns that are difficult or impossible to create manually. We will explore how algorithms can be used as a mechanism to generate shapes by adopting the Voronoi algorithm because it provides a wide environment for creativity through new intellectual processes that may not occur at all in the human mind …

The Detection Of Android Malwares Using The Features Selection Technique, Farah Rafid Salman, Amer Abdulmajeed Abdulrahman

Al-Esraa University College Journal for Engineering Sciences

The use of Android smartphones has been rising quickly as Internet-based services gain more popularity and develop. The Android operating system's enormous popularity has drawn malware attacks on these devices. It is difficult and ineffective to detect malware versions with features that modify their behavior in order to avoid detection by machine learning (ML) techniques. Effective feature selection plays a crucial role in detecting malware characteristics and reduces the dimensionality of a large dataset by removing unnecessary features that are not useful and keeping those relevant features that increase classification accuracy and detection rate. This helps to solve the problems …

A Review Of Polymer – Particles Composite Materials, Ismail Ibrahim Marhoon, Ayad Abbood Abdul Al-Hassan, Mohammed Ali Abdulrehman

Al-Esraa University College Journal for Engineering Sciences

In several engineering applications traditional materials are replacedby composite materials. Filled composite materials consist of the continuousmatrix and the filling particles. The primary purpose of introducing inorganicsolid particles into polymers is to essentially increase mechanical and physicalproperties. The wear properties of polymer composite can be changed to agreater degree by modifying the process of preparing the filled compositematerials. In the present review, a large-scale research has been conductedon the effect of wear on the composites of polymers. The effect of filler onthe polymer composites wear behavior has been thoroughly explained

Ability Of Replacing The Steel Strands By Cfrp In Pre-Stressed Concrete Girders: Art Review, Ahmed Salim Edan, Wael Shawky Abdulsahib

Al-Esraa University College Journal for Engineering Sciences

Fiber-reinforced polymer (FRP) composites are the modern,trustworthy alternatives to steel tendons and rebars. The bulk of currentresearch is devoted to establishing the feasibility of incorporating carbonfibre-reinforced polymer (CFRP) into reinforced concrete girders byevaluating the strength and reliability of CFRP and concrete components.In order to improve fatigue and corrosion resistance, CFRPs are crucial.Comparing reinforced prestressed concrete bridge girders strengthenedwith conventional steel reinforcement to those reinforced with CFRPs offersthe possibility of greatly increasing service life. Also widely researchedand used in bridge engineering as a corrosion-resistant substitute for steelreinforcement is CFRP composite material. The use of carbon fiber-reinforcedplastic (CFRP) reinforcement for prestressing concrete …

A Review Article On The Performance Based Seismic Design Of Structures, Reem Hatem Ahmed, Sahar Elaiwi, Shelan Hameed Ameen

Al-Esraa University College Journal for Engineering Sciences

For the most part, seismic design builds complex structural systems using the same small number of essential structural components as non-seismic design projects. Based on the building regulations, structures are frequently designed to "withstand" the largest earthquake with a given likelihood that is projected to happen at their location. This means that by avoiding structures from collapsing, the number of fatalities must be maintained to a minimal. Seismic design involves knowing the many failure modes regarding a structure and giving it the right stiffness, strength, ductility, and layout for ensuring that these modes do not take place. In this essay, …

Rattus Norvegicus As A Biological Detector Of Clandestine Remains And The Use Of Ultrasonic Vocalizations As A Locating Mechanism, Gabrielle M. Johnston

Master's Theses

In investigations, locating missing persons and clandestine remains are imperative. One way that first responder and police agencies can search for the remains is by using cadaver dogs as biological detectors. Cadaver dogs are typically used due to their olfactory sensitivity and ability to detect low concentrations of volatile organic compounds produced by biological remains. Cadaver dogs are typically chosen for their stamina, agility, and olfactory sensitivity. However, what is not taken into account often is the size of the animal and the expense of maintaining and training the animal. Cadaver dogs are typically large breeds that cannot fit in …

Trace Dna Detection Using Diamond Dye: A Recovery Technique To Yield More Dna, Leah Davis

Master's Theses

This study aspires to find a new screening approach to trace DNA recovery techniques to yield a higher quantity of trace DNA from larger items of evidence. It takes the path of visualizing trace DNA on items of evidence with potential DNA so analysts can swab a more localized area rather than attempting to recover trace DNA through the general swabbing technique currently used for trace DNA recovery. The first and second parts consisted of observing trace DNA interaction with Diamond Dye on porous and non-porous surfaces.

The third part involved applying the Diamond Dye solution by spraying it onto …

Beirut Arab University - Faculty Of Engineering - Newsletter Issue 0, Faculty Of Engineering, Beirut Arab University

Engineering Newsletters

No abstract provided.

Molecular And Cellular Level Characterization Of Cytoskeletal Mechanics Using A Quartz Crystal Microbalance, Emily M. Kerivan, Lyle Tobin, Mihir Basil, Dana N. Reinemann

Faculty and Student Publications

A quartz crystal microbalance (QCM) is an instrument that has the ability to measure nanogram-level changes in mass on a quartz sensor and is traditionally used to probe surface interactions and assembly kinetics of synthetic systems. The addition of dissipation monitoring (QCM-D) facilitates the study of viscoelastic systems, such as those relevant to molecular and cellular mechanics. Due to real-time recording of frequency and dissipation changes and single protein-level precision, the QCM-D is effective in interrogating the viscoelastic properties of cell surfaces and in vitro cellular components. However, few studies focus on the application of this instrument to cytoskeletal systems, …

Process Intensification Strategies For Green Solvent Mediated Biomass Pretreatment, Ahamed Ullah, Yuxuan Zhang, Can Liu, Qi Qiao, Qing Shao, Jian Shi

Markey Cancer Center Faculty Publications

Demonstrated to be highly effective for lignocellulosic biomass pretreatment, deep eutectic solvent (DES) has attracted increasing attention owing to its advantages of simple synthesis, relatively low chemical cost, and better biocompatibility as compared to certain ionic liquids. Here we provide a critical review of the status of the design/selection of DES for the pretreatment of biomass feedstocks with an emphasis on the process intensification strategies: 1) integration of microwave, ultrasound, and high solid extrusion for pretreating biomass, 2) one-pot DES pretreatment, enzymatic hydrolysis, and fermentation, 3) strategies for DES recycling and product recovery; and 4) recent progress on molecular simulations …

Reduced Metal Nanocatalysts For Selective Electrochemical Hydrogenation Of Biomass-Derived 5-(Hydroxymethyl)Furfural To 2, 5-Bis(Hydroxymethyl)Furan In Ambient Conditions, Baleeswaraiah Muchharla, Moumita Dikshit, Ujjwal Pokharel, Ravindranath Garimella, Adetayo Adedeji, Kapil Kumar, Wei Cao, Hani Elsayed-Ali, Kishor Kumar Sadasivuni, Naif Abdullah Al-Dhabi, Sandeep Kumar, Bijandra Kumar

Chemistry & Biochemistry Faculty Publications

Selective electrochemical hydrogenation (ECH) of biomass-derived unsaturated organic molecules has enormous potential for sustainable chemical production. However, an efficient catalyst is essential to perform an ECH reaction consisting of superior product selectivity and a higher conversion rate. Here, we examined the ECH performance of reduced metal nanostructures i.e., reduced Ag (rAg) and reduced copper (rCu) prepared via electrochemical or thermal oxidation and electrochemical reduction process, respectively. Surface morphological analysis suggests formation of nanocoral and entangled nanowire structure formation for rAg and rCu catalysts. rCu exhibits slight enhancement in ECH reaction performance in comparison to the pristine Cu. However, the rAg …

Modeling The Production Of Microalgal Biomass In Large Water Resource Recovery Facilities And Its Processing Into Various Commodity Bioproducts, James Pierson, Gopi Raju Makkena, Sandeep Kumar, Vinod Kumar, Vivekanand Vivekanand, Hasan Husain, Muhammad Ayser, Venkatesh Balan

Civil & Environmental Engineering Faculty Publications

Algae are capable of sequestering nutrients such as nitrates and phosphates from wastewater in the presence of sunlight and carbon dioxide (CO₂) to build up their body mass and help combat climate change. In the current study, we carried out different case studies to estimate the volume of algal biomass that could be produced annually using the rotating algal biofilm (RAB) method in three large-scale water resource recovery facilities (WRRFs) in Texas: Fort Worth, Dallas, and Houston. We calculated the total amount of lipids, carbohydrates, and proteins that could be fractionated from the algal biomass while using the …

Mango Surface Color Features Measurement Using Digital Image Processing, Md Towfiqur Rahman, Goutom Kumar, Md Abdul Momin

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Summary

Postharvest processing of agricultural produce is still done the conventional way in Bangladesh. Manual grading of agricultural produce, especially fruits and vegetables, is laborious and costly due to acute shortage of labor during the peak season, as well as difficulty maintaining the product quality. Machine vision system (MVS) applications are widely used nowadays as a non-destructive and cost-effective technology for automatically grading and sorting large volumes of produce in the packing house according to size, shape, color, texture, and surface defects. In this study, a simple MVS was constructed measuring different color features of mango fruit surface as a …

The Rise Of Terrorism In Africa And What It Means For U.S. Policymakers, Bridget Mary Hughes

Master's Theses

This thesis utilizes three case studies to measure the rise of terrorism in Africa. This qualitative data leads the reader to one ultimate question: what does the rise in terrorism in Africa mean for the United States (U.S.) and U.S. policymakers, National Security academia, students in National Security, if anything at all? The answer is: if civilian and military compounds are being targeted by these violent extremists, as these three case studies demonstrate, it is my recommendation that U.S. policymakers cease sending troops to the African theater and, instead, allocate funding to the citizens and nonprofits of the countries whom …

Impulse, Fall 2022, University Marketing And Communications, Jerome J. Lohr College Of Engineering

Impulse (Jerome J. Lohr College of Engineering Publication)

2 | Sanjeev Kumar Takes Helm as College’s 12th Dean
5 | College Develops Partnerships in India, Turkey
6 | Faculty News
8 | Aerofly — Profs, Alum Partner To Build Unique Drone
10 | Researchers Find Way to Extend Produce Shelf Life
12 | SDSU Claims National Title in Quarter-Scale Tractors
14 | Nation’s Top ASCE Chapter Housed at SDSU
16 | National Geo-Video Title Won By State Students
18 | Summer Brings Engineering Camps to Campus
20 | Haleigh Timmer — Money on the Court, In Classroom
22 | Daniel Burkhalter — Day in the Life of Student-Athlete …

Percutaneous-Reinforced Osteoplasty: A Review Of Emerging Treatment Strategies For Bone Interventions, Nischal Koirala, Jyotsna Joshi, Stephen F. Duffy, Gordon Mclennan

Civil and Environmental Engineering Faculty Publications

Percutaneous-reinforced osteoplasty is currently being investigated as a possible therapeutic procedure for fracture stabilization in high-risk patients, primarily in patients with bone metastases or osteoporosis. For these patients, a percutaneous approach, if structurally sound, can provide a viable method for treating bone fractures without the physiologic stress of anesthesia and open surgery. However, the low strength of fixation is a common limitation that requires further refinement in scaffold design and selection of materials, and may potentially benefit from tissue-engineering-based regenerative approaches. Scaffolds that have tissue regenerative properties and low inflammatory response promote rapid healing at the fracture site and are …

Effect Of Degradation Of Methylene Blue Dye (Mb) By Using Erbium Oxide (Er2o3) Nps, Hind Ahmed Jasim, Farah Farman Abbass, Sarah A. Hamood, Hind Mohammed Hassan, Mohammed Sellab Hamza

Al-Esraa University College Journal for Engineering Sciences

In an experiment investigating the photo catalytic degradation of methylene blue using varied concentrations of Er2O3 nanoparticles, different conditions were tested including with and without sunshine, as well as in the absence of a UV source. The presence of a UV source was also considered in the research. UV-Visible spectroscopy was utilized to characterize the catalysts. The degradation of methylene blue dye was monitored by spectrophotometry by tracking dye absorbance at regular time intervals and adjusting the dye concentration. The results indicated that the most effective degradation of methylene blue dye occurred during a 5-hour irradiation time and in the …

Architecture Between Development And Ability Programs, Allaa Ahmed Rasheed, Ibrahim Jawad Kadhim

Al-Esraa University College Journal for Engineering Sciences

The development of architecture and its pursuit of perfection can only be achieved through society to reach a specific result when meeting new desires that arise as a result of human development, expanding individual and societal needs, and deepening their relationships in multifaceted ways. The research focuses on development as it requires a clear cumulative vision of the integrative relationship between practice and participation in interpreting the act (effect) from the force (influence). It emphasizes that the power of capabilities is understood through learning and education in describing the capabilities of architecture. This involves adopting new ideas and intellectual premises …