Automotive Engineering Commons^™

Solar-Powered Automated Transportation: Feasibility And Visualization, Burford J. Furman, Laxmi Ramasubramanian, Shannon Mcdonald, Ron Swenson, Jack Fogelquist, Yu Chiao, Alex Pape, Mario Cruz

Mineta Transportation Institute

A solar-powered automated transportation network (ATN) connecting the North and South campuses of San José State University with three passenger stations was designed, visualized, and analyzed in terms of its energy usage, carbon offset, and cost. The study’s methodology included the use of tools and software such as ArcGIS, SketchUp, Infraworks, Sketchup, Rhinoceros, and Autodesk 3DS Max. ATN vehicle energy usage was estimated using data from the university’s Park & Ride shuttle bus operation and by modeling with SUMOPy, the advanced simulation suite for the micro-traffic simulator SUMO. The energy study showed that an extensive solar photovoltaic (PV) canopy over …

Integration Of Blockchain Technology Into Automobiles To Prevent And Study The Causes Of Accidents, John Kim

Electronic Theses, Projects, and Dissertations

Automobile collisions occur daily. We now live in an information-driven world, one where technology is quickly evolving. Blockchain technology can change the automotive industry, the safety of the motoring public and its surrounding environment by incorporating this vast array of information. It can place safety and efficiency at the forefront to pedestrians, public establishments, and provide public agencies with pertinent information securely and efficiently. Other industries where Blockchain technology has been effective in are as follows: supply chain management, logistics, and banking. This paper reviews some statistical information regarding automobile collisions, Blockchain technology, Smart Contracts, Smart Cities; assesses the feasibility …

Problem Solving Methods For Synthesis Of Physical Principles Of Mechatronic Module Operations In Intelligent Robotic Systems, Nazarov Khayriddin Nuritdinovich

Chemical Technology, Control and Management

The scientific paper investigates the methods for solving problems of synthesis of physical principles of operation of mechatronic modules of intelligent robotic systems are considered.

In addition, it deals with the specifics of the process of synthesis of the physical principles of the operation of mechatronic modules using predicate models, list models and information matrices of physical and technical effects.

It shows the interpretation of the components of the model of the system for the synthesis of the physical principles of operation of mechatronic modules of intelligent robotic systems and automatic control and the features of the synthesis algorithm for …

Rattle Detection – An Automotive Case Study, Orla Hartley

International Conference on Lean Six Sigma

This case study showcases the use of statistical tools to develop an objective Squeak and Rattle (S&R) measurement and detection test for End Of Line (EOL) sign off in an automotive manufacturing environment. Audio Induced S&R is an unwanted vibration within the vehicle caused by the sound system, impacting on customer perception of vehicle quality. Testing for S&R in an automotive environment has a key challenge; how to robustly detect a rattle at the EOL and thus prevent plant escapes to the customer. The objective test developed used microphones and analysers in order to replace an e subjective listening test. …

Sedan Performance/Economy Rear Diffuser, Jacob Boucher Koris

Thinking Matters Symposium

This project consists of designing in SolidWorks a model of the performance/fuel economy diffuser. The design is modeled with an Ahmed body (recommended shape for CFD testing vehicles) and the diffuser will be applied to the bottom of the rear bumper of the car. After this is done the model will be imported into ANSYS for CFD testing. Testing entails importing the model, then creating a mesh around the model, and then setting up the program to run analysis for calculating the coefficient of drag. Then building this SolidWorks model as a full working prototype for actual road-testing purposes. With …

Hinging, Propping, And Latching Mechanisms For Sunseeker Solar Car, Zachary Ruppenthal

Honors Theses

In this project, designs for the hinging, propping, and latching mechanisms on the 2021 Sunseeker Solar Car were created. These designs allow for the car’s array of solar panels to be held at any desired angle to maximize collection of solar power and give the team access to the battery and driver compartment. Removable telescoping prop rods with pin attachments are used to set the array at a desired angle. The hinging mechanism allows for the array to be lifted vertically prior to rotation in order to avoid interference with the car’s roll cage. To accomplish this, two four-bar linkages …

Autonomous Vehicle Camera Mount Application, Yuan Sheng Sit

Honors Theses

Autonomous vehicles consist of many complex systems, an extensive set of hardware components, and various computing algorithms that constantly work in harmony to provide selfdriving capabilities to a vehicle. This project focuses on developing a universal mount for a ZED 2 stereo camera used in data collection for autonomous driving applications. The main purpose of the mount is to reduce dashboard, windshield, and lens glare that affect the quality of data collection for autonomous driving applications. Software such as Ansys and SOLIDWORKS are used to simulate stress, strain, and thermal distributions on the mount to better understand the strong and …

Automated Scenario Generation Using Halton Sequences For The Verification Of Autonomous Vehicle Behavior In Simulation, Andrew Ferree

Doctoral Dissertations and Master's Theses

As autonomous vehicles continue to develop, verifying their safety remains a large hurdle to mass adoption. One component of this is testing, however it has been shown that it is impractical to statistically prove an autonomous vehicle’s safety using real-world testing alone. Therefore, simulation tools and other virtual testing methods are being employed to assist with the verification process. Testing in simulation still faces some of the challenges of the real world, such as the difficulty in exhaustively testing the system in all scenarios it will encounter. Manual scenario creation is time consuming and does not guarantee scenario coverage. Pseudo-random …

Mechanical Properties Of Nanomodified Hybrid Gfrp Composite Materials, Micah Rop Kimutai

College of Graduate Studies: Theses & Dissertations

The mechanical behavior of the nanomodified hybrid epoxy matrix was investigated in glass fiber reinforced plastics (GFRP). In this study, five nanocomposites enriched with as received halloysite, nanomer I.28E, HNT-APTES, and the hybrid combinations of the two HNTs with the nanomer I.28E were successfully fabricated. To evaluate the effects and morphological characteristics of the individual fillers and the hybrid configurations on the epoxy resin matrix, TGA, DSC, and DMA were analyzed. To understand the effect of the five configurations on the neat GFRP laminate, mode I interlaminar fracture toughness, tensile, and vibration properties were investigated. Electron microscopy testing techniques were …

Design And Implementation Of An Oxidation Catalyst For A Spark Ignited Two Stroke Snowmobile Engine, Noah Squires

Dissertations, Master's Theses and Master's Reports

Spark ignited two stroke engines are under increasing pressure as emissions standards become stricter, making them a perfect candidate for a catalytic aftertreatment system. Yet several significant challenges to catalysis exist. Namely two stroke exhaust systems are very sensitive to back pressure changes and high emissions concentrations can make controlling the temperature of the catalytic reaction difficult. Therefore, it is imperative that a two stroke specific catalyst design process be developed. This project focused on beginning to develop such a design process. Key results of this work include finding a location for the catalyst in the exhaust system that offers …

Road Racing Aerodynamic Simulation + Testing, Jack Sawyer

Williams Honors College, Honors Research Projects

There are multiple goals for this project. The first goal of this project is to design, assemble and simulate additional aerodynamic components. Another goal is to create a product that can analyze various angles of attack of Aerodynamic components. The product will be used on, or off the track to determine the lift coefficients of vehicles at varying speeds. I will be using my 1992 Honda Civic for testing and compare my physical results to my simulated tests.

The project did come with a list of design and manufacturing challenges along with additional finical cost which has resulted in some …

Less Commute Miles. Decreased Tire Wear. What Would You Do?, Dylan Schwarz, Brendon M. Ford, Brandon D. Hadinger, Abbie N. Pearce, Jacinta M. Pikunas

Williams Honors College, Honors Research Projects

With the flagrant recognition of the coronavirus as one of those most impactful viruses in the history of the world, it is important to study how the effects of such a disease can create troublesome ripple effects in the world. Covid-19 has caused the death of hundreds of thousands of individuals and has negatively impacted the lives of American’s all across the country during the nationwide lockdown. Decreased work commuters, minimal road travel, and little need for car repairs hit the Goodyear Tire and Rubber Company hard. The University of Akron has teamed up with Goodyear to explore such effects …

Design And Analysis Of One-Piece 10” Carbon Fiber Wheels For Zips Racing Zr20 Formula Sae Racecar, Patrick Kruse, Henry J. Wathen, Jordan J. Hyde, Nicholas D. Dobben, Jordan D. Blake

Williams Honors College, Honors Research Projects

Reducing the weight of a vehicle in racing can substantially improve the vehicle dynamics and general performance capabilities. More specifically, the reduction of the unsprung corner weight can provide noticeable performance gains in handling and responsiveness, leading to a quicker, more agile car due to a lower yawing moment of inertia. Unsprung weight reduction also improves the car’s ability to maintain contact between the tires and the road surface for a more consistent grip. In this project we identified the loads that act on the wheel rims according to the data collected from the sensors in the car’s suspension, and …

Experimental Evaluation And Simulation Of Torque Transmissibility Frequency Response Functions Of Vibration Isolators And Absorbers For Drivetrain Applications, Luke Jurmu

Dissertations, Master's Theses and Master's Reports

Four studies involving torsional vibration isolation performance of automotive drivetrain components, make up this dissertation. One study features a prototype planetary torsional vibration absorber, a unique device that targets low frequency torsion modes in automotive drivetrains. Two studies feature experiments on several torque converters, clutch locked and open, to validate models of the hardware. The last study details experiments on a centrifugal pendulum absorber in a torque converter, to characterize the viscous friction while submerged in automatic transmission fluid (ATF). The enclosed studies improve the state of the art of drivetrain vibration absorbers and isolators, by introducing a new vibration …

Development Of Autonomous Vehicle Motion Planning And Control Algorithm With D* Planner And Model Predictive Control In A Dynamic Environment, Somnath Mondal

Dissertations, Master's Theses and Master's Reports

The research in this report incorporates the improvement in the autonomous driving capability of self-driving cars in a dynamic environment. Global and local path planning are implemented using the D* path planning algorithm with a combined Cubic B-Spline trajectory generator, which generates an optimal obstacle free trajectory for the vehicle to follow and avoid collision. Model Predictive Control (MPC) is used for the longitudinal and the lateral control of the vehicle. The presented motion planning and control algorithm is tested using Model-In-the-Loop (MIL) method with the help of MATLAB® Driving Scenario Designer and Unreal Engine® Simulator by Epic Games®. Different …

Powertrain Fuel Consumption Modeling And Benchmark Analysis Of A Parallel P4 Hybrid Electric Vehicle Using Dynamic Programming, Aaron Robert Mull

Graduate Theses, Dissertations, and Problem Reports (ETD)

As regulations on the emission of greenhouse gasses continue to tighten on the automotive industry, the production of hybrid electric vehicles has gained significant popularity in recent years. With the increase in production, there has been a parallel demand in the advancement of both mechanical hardware and control system implementation used in these vehicles. A critical factor in the efficient operation of a hybrid electric vehicle is the energy management strategy where the goal is to maximize the efficient use of fuel energy to propel the vehicle. Designing a fuel-efficient control system is a complex challenge due to the degrees …

Application Of Project Management Strategies And Tools For An Efficient And Successful Competition-Based Engineering Senior Capstone Design Project, Benton Duane Morris

Graduate Theses, Dissertations, and Problem Reports (ETD)

The industry-level engineering workforce for a project in modern times requires a clear plan and management process to execute the goals of the consumer and the producer. The engineers of tomorrow need the ability to be competitive and successful upon entry into the industry, where there have already been established management tactics for the execution of the company's goals. The mentality within the industry is adaptable to senior collegiate-level competition-based capstone projects. Therefore the West Virginia University EcoCAR Mobility Challenge team has adapted, altered, or adjusted industry-level practices in order to have an overall functioning and effective team that follows …

Implementation Of Fuzzy Logic Control Into An Equivalent Minimization Strategy For Adaptive Energy Management Of A Parallel Hybrid Electric Vehicle, Jared Alexander Diethorn

Graduate Theses, Dissertations, and Problem Reports (ETD)

As government agencies continue to tighten emissions regulations due to the continued increase in greenhouse gas production, automotive industries are seeking to produce increasingly efficient vehicle technology. Electric vehicles have been introduced by the industry, showing promising signs of reducing emissions production in the automotive sector. However, many consumers may be hesitant to purchase fully electric vehicles due to several uncertainty variables including available charging stations. Hybrid electric vehicles (HEVs) have been introduced to reduce problems while improving fuel economy. HEVs have led to the demand of creating more advanced controls software to consider multiple components for propulsive power in …

Development Of Thermal Management Strategies Using Cylinder Deactivation For Low-Load Operation In Heavy-Duty Diesel Trucks, Christian M. Hushion

Graduate Theses, Dissertations, and Problem Reports (ETD)

Cylinder deactivation (CDA) has been used in gasoline engines, for decades, as a strategy for fuel consumption reduction. The idea of CDA in the heavy-duty diesel (HDD) engine sector has gained traction as a pathway to fuel efficient thermal management strategy. Oxides of nitrogen (NOx) control has been a major focus over the last decade and maintaining conducive aftertreatment temperatures is a major design aspect. HDD original equipment manufacturers (OEM) have developed a variety of thermal management strategies which almost all revolve around large fuel penalties. The goal of all of these strategies is for thermal management of the diesel …

Control Of Mr Damper Using Anfis And Pid Controller For Optimum Vehicle Ride Comfort, Mohammad Faisal Yakhni, Mohamad Ali, Mohamed El-Gohary

BAU Journal - Science and Technology

Suspension system design is an important challenging duty that facing car manufacturers, so the challenge has become to design the best system in terms of providing ride comfort and handling ability under all driving situations. The goal of this paper is to provide assistance in enhancing the effectiveness of the suspension system. A full car model with eight Degrees Of Freedom (DOF) was developed using MATLAB/Simulink. Validation of the Simulink model was obtained. The model was assumed to travel over a speed hump that has a half sine wave shape and amplitude that changing from 0.01 to 0.2 m. The …

A New Method Of Statcom Controlling For Harmonic Mitigation And Power Factor Correction, Doha Jdeed

Journal of the Arab American University مجلة الجامعة العربية الامريكية للبحوث

This paper presents a control algorithm of 3ph STATic synchronous COMpensator (STATCOM). The algorithm depends on the accurate reference currents extraction from only the nonlinear load current spec-trum in frequency domain using Fast Fourier Transfer (FFT). Then the determined harmonics and reactive components of load current are added together to form the compensating reference signals, the PI controllers then generate signals which control the Pulse Width Modulation (PWM) method. The simulation of the study is carried out under MATLAB/Simulink environment to show the usefulness of this control algorithm with nonlin-ear dynamic loads. It determines exactly the phase shift between the …

Photovoltaics- And Battery-Based Power Network As Sustainable Source Of Electric Power, Prahaladh Paniyil, Vishwas Powar, Rajendra Singh, Benjamin Hennigan, Pamela Lule, Matthew Allison, John Kimsey, Anthony Carambia, Dhruval Patel, Daniel Carrillo, Zachary Shriber, Truman Bazer, James Farnum, Kushal Jadhav, Dalton Pumputis

Publications

With the rise in the utilization of free fuel energy sources, namely solar and wind, across the globe, it has become necessary to study and implement models of a sustainable power network. This paper focuses on the design of a conceptual power network based on photovoltaics (PV) for power generation and lithium-ion batteries for storage. The power system showcases the various metrics that are involved in a grid-tied PV- and battery-based power network. It also encompasses the various design parameters and sizing considerations to design and conceptualize such a power network. The model focuses on the importance of the conservation …

Turbulence Investigations In The Core-Flow Of An Internal Combustion Engine, James R. Macdonald

Dissertations

Turbulence significantly impacts the operation of energy conversion devices. In internal combustion (IC) engines, mixing, heat transfer, and combustion are all strongly dependent on the turbulence inside the cylinder. Consequently, knowledge of the state of turbulence is critical for improving our understanding and modeling of engine processes.

Turbulence states may be determined through analysis of the Reynolds stress tensor, which can in turn be experimentally quantified using velocity data. In this research, stereoscopic particle image velocimetry (stereo-PIV) experiments were conducted in a single-cylinder, motored engine with optical access to measure the two-dimensional, three-component (2D-3C) velocity fields throughout the compression stroke. …

Control And Locomotion Of Inertially And Magnetically Actuated Multi-Scale Robotic Systems, Ehab Al Khatib

Mechanical Engineering Research Theses and Dissertations

In this research, two actuation systems were introduced, inertial and magnetic actuation. In the inertial actuation, the robot used the transfer of momentum to navigate, and this momentum could be generated by spinning masses and wheels. Recent studies in our System Laboratory proved that a wide range of inertially actuated locomotion systems could be generated. This can be achieved by using a family tree approach, starting from a very simple system, and progressively evolving it to more complex ones. The motion diversity of these robots inspired us to extend their locomotion from a macro scale to millimeter and micro scales. …

Fluid Power Vehicle Challenge, Jacob Torrey, Kayla Londono, Bryson Chan, Aaron Trujillo

Mechanical Engineering

The FPVC combines mechanical engineering disciplines to design and manufacture a vehicle that utilizes hydraulic power. The FDR covers the final manufacturing process and verification processes developed during the front end of research and analysis built upon the Critical Design Review (CDR) and the PDR (Preliminary Design Review). This report showcases the design decisions and extensive research that supports the continuing efforts by the Team Pump My Ride, to build upon the accomplishments of Cal Poly’s previous team, The Incompressibles. The FDR presents how Team Pump My Ride produced the design changes from the CDR and PDR to achieve improvements …

Comparison Of Optimal Energy Management Strategies Using Dynamic Programming, Model Predictive Control, And Constant Velocity Prediction, Amol Arvind Patil

Masters Theses

Due to the recent advancements in autonomous vehicle technology, future vehicle velocity predictions are becoming more robust which allows fuel economy (FE) improvements in hybrid electric vehicles through optimal energy management strategies (EMS). A real-world highway drive cycle (DC) and a controls-oriented 2017 Toyota Prius Prime model are used to study potential FE improvements. We proposed three important metrics for comparison: (1) perfect full drive cycle prediction using dynamic programming, (2) 10-second prediction horizon model predictive control (MPC), and (3) 10-second constant velocity prediction. These different velocity predictions are put into an optimal EMS derivation algorithm to derive optimal engine …

Dartmouth Formula Racing: Full Electric Battery System Design, Matt Gardner, Jacob Hagler, Ruthie Nordhoff, Otto Salmi

ENGS 89/90 Reports

Dartmouth Formula Racing (DFR) lacked an electrical energy storage system that was Formula Hybrid rules-compliant, optimized for FH events, safe, reliable, and integrated with the rest of their vehicle. Additionally, the team lacked the academic and professional resources required to bring a thorough, analytical approach to the design, testing, and documentation of the new storage system. Our team designed and built a Lithium-Ion battery pack (accumulator) containing energy storage, active cooling, battery management and temperature monitoring systems, and control circuitry compatible with DFR’s vehicle. Collaboration throughout design, fabrication, assembly and testing processes ensured effective knowledge transfer to the DFR team.

Internal Combustion Engine, Philippe D. Habets, Sam S. Flood, Paing Htet Lin, Jason Wu, Ricardo Cuevas

Mechanical Engineering

The goal of this project is to modify a Honda GX35 engine to improve its fuel efficiency and maximize its competitiveness in the Shell Eco-marathon competitions. This competition has tight restrictions on the type of fuel used to power the engine, but otherwise has very few rules limiting the type of modifications which may be made. Our primary goals are to maximize volumetric efficiency and maintain an efficient operating temperature. Future work might pursue more advanced technologies such as pseudo-atkinson cycle operation.

Electrathon Vehicle: Front Suspension, Christopher Clark

All Undergraduate Projects

Central Washington University does not currently have a competition field-able Electrathon America electric vehicle with adequate front suspension. The aim of this project was to provide the vehicle with handling that supports sound ground contact throughout the competition environment. Handling that supports sound ground contact is important for vehicles so they can go around corners without a loss of traction or flipping over. The solution to this engineering problem was designed and tested through various requirements. The requirements at hand were that the suspension components weigh less than 50 pounds, that there be no more than 3 inches of suspension …

Numerical Analyses And Integration Of Split Lot Sizing Using Lean Benchmark Model For Small Lot Manufacturing In High Mix Low Volume Production, Omkar Bhosale

Theses and Dissertations--Manufacturing Systems Engineering

As the global demand for automobiles has increased rapidly over the last fifty years, customers have become more particular about the characteristics of the autos they want. This change in demand, in part has pushed manufacturing to become more flexible and created a demand for alternative, more efficient processes like the High Mix Low Volume (HMLV) production of vehicles. During HMLV, manufacturers create production lot sizes and schedule to synchronize the production processes to meet customer demand on time. The demand for the automobile parts may not be uniform or parts may not be consumed by the customer immediately, Due …