Automotive Engineering Commons^™

Machine Learning For Predictive Energy And Emissions Modeling Of Vehicles And Power Grids In The United States, S M Tanvir Faysal Alam Chowdhoury

Dissertations

The environmental benefits of electric vehicle (EV) adoption depend on more than replacing internal combustion engine vehicles with electric powertrains. EV adoption reshapes electricity demand, interacts with regional generation mixes, and influences travel behavior and congestion, creating a coupled transportation-energy system in which vehicle and power-plant emissions must be evaluated together. This dissertation develops machine-learning frameworks for predicting energy consumption and emissions from vehicles and power grids under rising EV adoption. The first component forecasts grid emissions from EV charging. Using simulation data from NREL's Cambium database, a Prophet-based time-series framework predicts carbon dioxide, nitrous oxide, and methane emission rates …

Adaptive – Compositional Method For Coordinating Subsystems At Different Levels In Hierarchical Control Systems, Husan Zakirovich Igamberdiyev, Uktam Farxodovich Mamirov Mr, Inomjon Ilxom Ugli Abdukaxxarov Mr

Technical science and innovation

This paper examines the problem of synthesizing algorithms for the composition of subsystems at various levels within complex hierarchical control systems under conditions of uncertainty and resource constraints. It is demonstrated that classical composition algorithms, which rely on the intersection of admissible sets and the use of local optimality criteria, suffer from several significant drawbacks. These include a combinatorial increase in complexity, dependence on the expert selection of parameters, and limited applicability in dynamic environments. To overcome these shortcomings, an adaptive-compositional method is proposed. This method is based on the dynamic recalculation of coordination parameters, the integration of model predictive …

Calculation Of The Basic Parameters Of The Hybrid Power Plant (Hpu) On The Spark Car, Rustam Raximovich Tillahodjaev, Jamoliddin Pardaboy Ugli Turdiev

Technical science and innovation

This article presents one of the effective ways to improve fuel efficiency and reduce emissions of toxic substances, the use of internal combustion engines with the use of an electric drive in their designs. In recent years, two directions in the development of cars with electromechanical drives have been clearly identified, the first is the creation of a pure electric car, the second is the development of an electromechanical drive with a combined (hybrid) power plant. Due to the lack of efficient energy storage available for mass production, pure electric vehicles have relatively low mileage on a single charge. This …

A Comparative Study Of Model Predictive Control And The Stanley Method For Vehicle Path Tracking Applications, Noah S. Fitzgerald

Master's Theses

This thesis compares a model predictive controller (MPC) and a lateral Stanley controller for vehicle path-tracking applications under simulation-based and perception-driven operating conditions. Both controllers were evaluated in simulation using a nonlinear dynamic bicycle model executing single and double lane change maneuvers. Following simulation-based evaluation, both controllers were implemented on hardware within a perception-driven steering-control pipeline. This pipeline utilized recorded sensor data from the MXcarkit 1/8^th-scale autonomous vehicle platform, incorporating lane instance segmentation and homography-based roadway estimation.

Under idealized simulation conditions, the MPC demonstrated improved trajectory-tracking performance during aggressive maneuvers while requiring greater steering activity and computational effort …

Comprehensive Analysis Of Spray Development And Low Temperature Combustion Characteristics In A Cvcc With Nvh Of Renewable Aerospace Fuels: Hefa & Ft Synthetic Kerosene (S8) Compared To Jet-A & Ulsd, Coleman Norton

Honors College Theses

A comprehensive analysis was conducted to research the viability of Hydroprocessed Esters and Fatty Acids (HEFA) and S8 Synthetic Kerosene fuels as a drop-in replacement for conventional petroleum-based fuels, Jet-A and ULSD (Ultra Low Sulfur Diesel). Global transportation remains heavily dependent on liquid fossil fuels, while renewable aerospace fuels offer a promising pathway to reducing life cycle greenhouse gas emissions and pollution. However, the combustion performance and long-term feasibility of these fuels remain insufficiently characterized. This study performed a thorough assessment of each fuel's thermophysical and combustion properties. Thermophysical characterization encompassed viscosity, freezing point, energy density, spray atomization, and volatility. …

Design Optimization Of Active-Stabilizing Canards For High-Powered Rockets, Simon Babcock

Senior Honors Theses

Rocket canards are a common means of stabilizing a high-powered rocket in flight by producing aerodynamic forces to correct the rocket's trajectory. The size, shape, and position of the canards relative to the rocket body determine their control effectiveness and aerodynamic efficiency – two objectives of canard design with an inverse relationship to each other. By integrating automated iterative rocket trajectory simulation with adaptive surrogate modelling, this research optimized the canard planform geometry for a high-powered rocket to maximize the canards’ control effectiveness and aerodynamic efficiency through multi-variable, multi-objective design optimization. The canard design was first parameterized into four design …

Safe Control Design For Quadruped Locomotion In Unstructured Environments Using Linear Transfer Operators, Sriram Sundar Krishnamoorthy Shankara Narayanan

All Dissertations

Deploying quadruped robots in unstructured, obstacle-rich environments requires control and planning methods that remain safe and reliable despite complex terrain geometry, limited sensing, and inevitable modeling errors. This thesis develops operator-theoretic tools for safe control design of robotic systems using linear transfer operators, with a focus on quadruped locomotion in unstructured environments. The central goal is to develop a unified operator-theoretic framework for safe control design based on the Perron–Frobenius (P–F) and Koopman operators. In particular, the thesis leverages \emph{density functions} to develop safe navigation frameworks in the dual space of densities. In the operator-theoretic perspective, the P–F operator governs …

Development Of A Mixing-Controlled Combustion Model For 0d Engine Modeling: Using High-Order Models To Guide The Formulation Of Reduced-Order Models, James Gohn

All Dissertations

Vehicles are becoming increasingly complex to comply with the increasingly stringent regulations placed on all market sectors while still maintaining performance requirements. This increased complexity leads to increases in the cost and time it takes to develop and produce these next generation vehicles. To meet demand therefore, it becomes necessary to evaluate numerous design iterations using computer models. There are multiple levels of models that may be necessary for different purposes or use cases. All levels of modeling for virtual prototyping, however, require a level of validation and predictive ability to be useful. To this end, the following thesis presents …

Performance Analysis Of A Converted Electric Underbone Motorcycle: A Combined Dynamometer And Road Test Approach, Dhimas Oki Permata Aji, Sigit Suwarto, Yunus Ari Rokhim

Journal of Mechanical Engineering Science and Technology (JMEST)

In developing countries, converting traditional underbone motorcycles to electric vehicles transforms sustainable transportation from a theoretical concept to a practical implementation. This paper describes the design and operational performance evaluation of an electric underbone motorcycle conversion system that integrates a 2.0 kW, 72 V BLDC motor and a 72 V, 20 Ah lithium-ion battery pack. Compared to previous studies, this paper combines, for the first time, both dynamometer and road tests as the basis for a comprehensive performance assessment of low-cost motorcycle conversion. The dynamometer test was conducted under laboratory conditions to evaluate the test system for torque, power output, …

Plasmoid Vortex System Retrofit A Sustainability And Efficiency Study On Internal Combustion Engines, Walker Hall

Doctoral Dissertations and Master's Theses

The thesis addresses the persistent inefficiency and environmental degradation caused by internal combustion engines in modern vehicles, a major issue as the automotive industry faces increasing pressure to reduce fuel consumption and greenhouse gas emissions. Internal combustion engines, which power most cars today, convert only about 20-30% of fuel energy into useful work, with the remainder lost as heat and exhaust waste, including carbon monoxide (CO), carbon dioxide (CO₂), hydrocarbons (HC), and nitrogen oxides (NOx). This inefficiency contributes to global carbon emissions, with transportation accounting for approximately 29% of U.S. greenhouse gases in 2021 [1]. As regulatory standards tighten (e.g., …

Uncertainty-Aware Estimation, Planning, And Control For Tracking Multiple Drifting Patches In Flow Fields, Daniel O. Akanji, Krishnanand N. Kaipa, Cong Wei

Mechanical & Aerospace Engineering Faculty Publications

In this study, we present a replay-based framework for uncertainty-aware persistent tracking of multiple advected surface patches using an autonomous marine vehicle operating in spatiotemporal-varying currents. The method combines three components: local flow estimation, covariance-aware patch-boundary propagation with intermittent boundary fusion, and mission-level scheduling over multiple patches. Each patch is represented by a polygonal boundary, whose vertices are propagated through the estimated flow field while carrying per-vertex covariance, thereby quantifying uncertainty growth during advection. A flow-aware gain-scheduled linear quadratic regulator (LQR) was designed to shape the desired surge speed to take advantage of favorable currents. When the vehicle services a …

The Efficacy Of Hybrid Manufacturing For High Stress Automotive Parts, Logan Trimmer

Harrisburg University Other Works

Presentation covering the broad strokes of the project. The goal was to prove the viability of hybrid/additive manufacturing for high stress automotive applications. This project focused on recreating a piston from an old engine to examine if hybrid manufacturing could be used for such applications. On a small scale, hybrid manufacturing was able to be more cost effective if the costs of the equipment and electricity were ignored. The decision to ignore those costs came from the inability to find accurate prices for industrial casting.

Investigation Of The Impact Of The Shape Of The Wings On Formula E Racing Car Performance: Enhancements For Optimal Aerodynamics, Ednie Marthe Adlaikah Jozil

Honors Undergraduate Theses

The aerodynamic performance of a Formula E chassis significantly dictates its overall race efficiency, directly impacting crucial parameters such as battery range and thermal management. This thesis investigates the external aerodynamics of the baseline Gen 2 Formula E car and evaluates the performance gains of two novel aerodynamic packages: a "Fully Modified" configuration and a "Flat Rear Wing" design. Computational Fluid Dynamics (CFD) simulations were conducted to analyze drag coefficients (Cd), downforce generation, and vehicle wake structures at race-relevant free-stream velocities (e.g., 37 m/s and 89 m/s). To ensure numerical robustness, the computational setup was validated using a smooth sphere …

Machine Learning And Multi-Scale Optimization For Control And Energy Management In Connected And Automated Vehicle Propulsion Systems, Joshua D. Orlando

Dissertations, Master's Theses and Master's Reports

This dissertation presents a multi-scale optimization framework leveraging machine learning (ML) to enhance energy efficiency in connected and automated vehicle (CAV) propulsion systems. As transportation transitions toward hybridization and automation, the integration of vehicle-to-everything (V2X) connectivity and advanced control algorithms offers unprecedented opportunities for energy reduction. This research addresses three critical scales of vehicle energy management: multiple vehicle-level coordination, component-level powertrain dynamics, and real-time vehicle parameter estimation.

First, the research investigates the energy consumption characteristics of heterogeneous propulsion systems—ranging from internal combustion engines to battery electric vehicles across light- and heavy-duty sectors—on arterial roadways. Utilizing Particle Swarm Optimization (PSO) and …

Lean Service System Optimization In U.S. Automotive Maintenance Centers: A Time Study And Simulation-Based Approach To Reducing Service Cycle Time And Increasing Efficiency, Rakibul Hasan Sarker

All Graduate Theses, Dissertations, and Other Capstone Projects

The primary objective of this study is to measure the current service time at a U.S. automobile service center, with the aim of reducing waste and optimizing service operations through time study and simulation modeling. Inefficiencies in those service centers increase service time and labor costs, reduce service quality, and reduce workshop productivity, thereby increasing customer waiting time. In this study, real-world shop floor data were collected from a single service center, namely Jiffy Lube. Over the course of ten working days, 205 vehicle data points were acquired. Service time, bay time, and overall process time were computed and examined …

The Efficacy Of Hybrid Manufacturing For High Stress Automotive Components, Logan Trimmer

Harrisburg University Other Works

The goal of this research was to establish the viability of using hybrid manufacturing for automotive applications. By verifying that high-stress components can be created, it can be assumed that any other lower stress part could be made to match the strength requirements. A limiting factor of adoption for hybrid manufacturing is how new the technology is. Studies on time and cost were performed allowing for comparisons with traditional manufacturing technologies (casting, forging, milling) used in automotive applications. This research utilized a Haas Automation UMC750 5-axis CNC mill with a Meltio laser wire direct energy deposition attachment. Fusion 360 was …

Study On The Knock Resistance Offered By Thermally Stratifying Water Injections In A Single Cylinder Spark Ignition Engine, Aditya Datar

All Theses

Stochastic end-gas autoignition in SI engines, commonly called ‘knock’, limits attainable engine efficiencies. Multiple pathways to extend SI engine operation into knock-limited regions have been studied, including direct water injection (DWI). This study employs single-cylinder engine experiments and modeling to investigate the knock resistance offered by compression stroke water injections, which have shown to thermally stratify the cylinder in HCCI. In SI, thermally stratifying injections are expected to forcibly widen the cylinder temperature distribution by preferentially cooling the cylinder periphery. The end-gas is in the cylinder periphery; therefore, a cooler end-gas would result in longer ignition delays, thus providing knock …

In-Field Tractor Operational Load Profile Generation In Support Of Advanced Tractor Testing In Mixedmode Power, Andrew Donesky

Dissertations and Doctoral Documents, University of Nebraska-Lincoln, 2023–

This dissertation addresses the need to better characterize real-world tractor power requirements across drawbar, power take-off (PTO), and hydraulic modes to support more representative tractor testing. Conventional testing protocols, such as OECD Code 2, emphasize steady-state performance under controlled high-load conditions, which do not reflect the mixed and dynamic demands of modern field operations. To address this gap, a Tractor Instrumentation System (TIS) was developed, validated, and deployed to collect high-resolution, mixed-mode power data during planting, anhydrous ammonia application, and grain cart operations. The TIS integrates physical sensors, including custom load pins, hydraulic pressure/flow sensors, and a redesigned PTO torque …

Tradespace Exploration For Multiple Collaborative Vehicles, Mrunal Deshmukh

All Theses

Modern military operations demand systems that adapt to uncertain, rapidly changing missions across diverse terrains. Traditional single-platform vehicle design is insufficient for such complexity. This research introduces a hierarchical tradespace exploration framework for designing and evaluating families of heterogeneous ground vehicles under a System-of-Systems (SoS) architecture. The framework treats vehicle design as a co-optimization problem, where a “parent” vehicle (e.g., a Squad Multipurpose Equipment Transport) coordinates specialized “child” vehicles for reconnaissance, amphibious tasks, terrain traversal, and stealth missions. Unlike conventional approaches that optimize vehicles individually, this study emphasizes collaborative performance, resource sharing, and adaptability at the family level. Central to …

Adaptation Of Shot Peen Parameters For Gear Geometry, David J. Breuer, Beth Matlock

15th International Conference on Shot Peening

Shot peening is a well established process for the surface enhancement of gearing. Gearing is a primary example of a high cycle fatigue application that can benefit from residual stress enhancement. Designing shot peening parameters to specific gear geometry based on material, heat treatment, and surface finish is a more precise way to achieve better performance outcomes. One of the best tools to assist in the optimal shot peening is x-ray diffraction (XRD) and its ability to measure small differences that can result in significant performance outcomes. XRD residual stress measurements are a direct measurement of elastic strain. The diffraction …

Application Of Burnishing Process Expected To Frictional Heat To Non-Oriented Electromagnetic Steel Sheet, Yuji Kobayashi, Masato Okada

15th International Conference on Shot Peening

Burnishing is a technology used to improve the surface roughness of metals. On the other hand, it is expected that the metal structure near the surface will change due to strong distortion.

The magnetic properties of electromagnetic steel sheets depend on large crystal grains and fine crystals near the surface[1]. In particular, thinner fine crystal grain layers on the surface are expected to reduce iron loss. In this study, the power generation characteristics of Burnished electromagnetic steel sheets were evaluated.

Electromotive force waveform was evaluated by rotating the laminated electromagnetic steel sheets and using a spindle motor. The electromotive force …

The Effects Of Shot Peening Highly Loaded Compression Springs, David J. Breuer

15th International Conference on Shot Peening

The compression spring in this test study is typical of one used in a demanding off-road vehicle suspension. The cyclic loads applied during fatigue tests were severe enough to cause failure in approximately 11,000 cycles without shot peening.

The objectives of this study were the following: (1) Design a compression spring similar to those used in the off-road recreational industry. (2) Design & manufacture a fatigue test stand that could withstand high loads for months of testing. (3) Generate a matrix of shot peening treatments to produce different amounts of residual compressive stress. (4) Measure the shot peening residual compressive …

Decision Field Theory For Human-Multi-Robot Collaboration: Human-Centric Decision-Making For Multi-Robot Systems, Ryan Mbagna Nanko

All Theses

At first glance, choosing between an apple and an orange appears to be a straightforward matter of personal taste; however, this seemingly simple preference opens a window into the multifaceted world of decision-making, revealing the complex interplay of cognitive processes, psychological, and behavioral-economic principles that guide our choices \cite{bandyopadhyayRoleAffectDecision2013}. By unpacking these nuanced perspectives, we uncover insights that can drive more effective human-robot interaction and collaboration.

Modeling human cognition requires understanding the evolution of choice utility and the influence of emotions. Decision Field Theory (DFT) stands out by capturing the fluctuating nature in human preferences over time, explaining why choices …

Advancing Life Cycle Assessment For Environmental Sustainability Of Carbon Fiber-Reinforced Polymer Composites (Cfrps)), Hao Chen

All Dissertations

Carbon fiber-reinforced polymer composites (CFRPs) have emerged as promising materials, particularly for lightweight applications, with the potential to reduce environmental impacts across multiple sectors, including automotive, aerospace, and renewable energy. However, fully realizing their sustainability potential requires a more comprehensive and context-specific understanding of their environmental performance throughout the entire life cycle—from raw material production to end-of-life management.

This dissertation advances life cycle assessment (LCA) practices for CFRPs by addressing key challenges across multiple phases of the CFRP life cycle. First, I conducted a critical review and meta-analysis of carbon fiber manufacturing, revealing substantial variability in reported data on energy …

Comparative Analysis Of Gas And Mechanical Emissions From Electric Cars And Internal Combustion Engine Vehicles, Bakhtiyor Akhmatjonovich Kosimov

Technical science and innovation

This article analyzes the environmental impact of modern cars, in particular the amount of harmful substances emitted into the environment by electric cars and internal combustion engine cars, and provides scientific information on the substances that are released from cars in the form of not only gaseous emissions, but also dust particles generated by the mechanical wear of the brake system and tires. At the same time, this article also takes a scientific approach to the wear rates of brake pads and tires, their impact on environmental safety, and the level of dispersion of the microdust generated. Comparative tables have …

Development Of A Cost-Effective Daq For Measuring Brake Performance In Race Cars, Adrin Alias

2025 Spring Honors Capstone Projects - Archive

This project explores the feasibility of creating a cost-effective data acquisition (DAQ) system for high-speed, real-time brake performance testing of Formula SAE racecars. The research addresses the limitations of the current MoTeC DAQ system currently employed by the team, which is costly and time-consuming to set up for on-car testing. The team will use a brake dynamometer for steady-state comparisons of different brake pad compounds (senior design project), but evaluating real-world performance requires on-car testing. By systematically comparing various hardware platforms, sensors, communication protocols, and storage solutions, this project aims to balance cost-efficiency with reliability and performance. The research evaluates …

Computational Modeling Of Torque Arm And Load Cell Interactions In Uta Racing Brake Dynamometer, Anthony A. Aiyedun

2025 Spring Honors Capstone Projects - Archive

The UTA Racing Team is developing a brake dynamometer to measure the coefficients of friction of various brake pads and calipers under controlled conditions. The dynamometer simulates on-track braking scenarios, testing brake pads at temperatures up to 1300ºF and pressures similar to racing environments. Its primary goal is to generate accurate friction vs. temperature graphs for various brake pad and rotor combinations, addressing the need for dedicated testing equipment. This project creates an ANSYS simulation of the torque arm and load cell interaction. The computational model accurately represents the relationship between applied torque and measured load cell force, incorporating precise …

Carbon Fiber Cv Tripod Axle Design: Husker Motorsports Formula Sae, Taylor D. Boudreaux

Honors Program: Senior Projects (Public)

The 2024–2025 HMS Formula SAE senior design team successfully reduced axle system weight, cost, and improved manufacturability using a bonded tripod joint and ±45° intermediate modulus carbon fiber tube. The final design was validated on HMS 25, with no failures under rigorous testing.

Budget:
/="/"> Total project cost was $1,165.64, exceeding the initial $1,000 target due to unanticipated test rig expenses. However, per-axle production cost was reduced from $525.31 to $383.37 through in-house manufacturing, use of on-hand epoxy (DP460), and switching to cost-effective 7068 aluminum. The axle-specific cost was $766.74.

Timeline:
/="/"> Despite early delays from building a torsional testing …

Advances Towards A Robotic Management Vehicle Suited To Nurse Row Crops To More Efficient Outcomes, Adam Mk Gronewold

Dartmouth College Ph.D Dissertations

Enhancing agricultural production while reducing input costs remains a central challenge in modern row-crop management. Recent advances in computation, imagery, and sensors are enabling more efficient practices across various agricultural domains, and automation technologies are increasingly available to manage tasks central to perennial crop development. Automation in row-crop agriculture, by contrast, lags behind. This thesis explores utilizing small, unmanned ground vehicles to transform row cropping through the implementation of unconventional, in-season management strategies. The first focus of this work considers improvements to nitrogen fertilization using small, autonomous vehicles. An agronomy experiment in corn assessed the effects of gradually applying nitrogen …

Comparative Evaluation Of Linear Regression, Cross Validation And Regularization Approaches In Multivariate Data Analysis, Ransford Owusu, Felix Yeboah, Francis Effah Boateng

Data Science and Data Mining

This study evaluates linear regression and its enhanced variants incorporating cross-validation and regularization techniques for high-dimensional, multivariate datasets. We address challenges such as multicollinearity and overfitting. Methods including Ridge, LASSO, and Elastic Net are compared against ordinary least squares regression. Empirical analysis using an automobile dataset for fuel efficiency prediction shows that while OLS regression captures basic relationships, its limitations are mitigated through regularization and cross-validation, resulting in improved model interpretability. The findings provide a comprehensive framework for predictive modeling in complex data environments and offer insights into statistical methodology and practical applications in the automobile industry.