Structures and Materials Commons^™

Computational Modeling Of Single Shear Bolted Joints In Hybrid Composite Laminates With And Without Film Adhesive, Cameron S. Mcmahan

Theses and Dissertations

This research explores the effectiveness of predicting composite failure subject to quasi-static loading conditions using computational methods. FEA models were created using Abaqus and were employed to predict composite yield and initial failure behavior. Boundary conditions are generated to replicate the loading scenario seen in the experimental tests. Computationally predicted structural response of the composite range in accuracy from a 2% difference compared to experimental values to a maximum of 63%.

Experimental Investigation Of Enhanced Damage Resistant Fiber Metal Laminates, Cannelle Metang Tefoung

Doctoral Dissertations and Master's Theses

Fiber metal laminates (FMLs) are hybrid composite structures made from fiber reinforced polymeric materials sandwiched between layers of thin metal alloy sheets. FMLs combine the advantages of metallic materials and fiber reinforced matrix systems. Some of these advantages include: lighter weight, enhanced impact tolerance, improved corrosion resistance, better fire resistance, longer fatigue life, greater tensile strength, easier repair ability and maintainability, etc. The most well-known commercially available FML is GLARE (Glass Laminate Aluminum Reinforced Epoxy), however there are ongoing issues, which include a very high fabrication cost compared to many competing material systems and substantial delamination upon impact and failure. …

A Multiscale Model For Damage Progression And Detection In Piezo/Pyroelectric Composite Laminates, Yehia Bahei-El-Din, Amany Micheal

Centre for Advanced Materials

Assessment of damage initiation and progression in composite structures reinforced with electrically active filaments is modelled in a multiscale analysis. The analysis developed is a two-tier, interactive analysis, which involves two length scales; macroscopic, and microscopic. The proposed multiscale analysis provides seamless integration of the mechanics at the two length scales, including piezoelectric and pyroelectric coupling effects and damage under overall thermomechanical loads and an electric field applied to electroactive fibers. The macromechanical analysis is performed for multidirectional, fibrous laminates using the lamination theory, including bending, and the micromechanical analysis is performed using a two-phase model and a periodic array …

Detecting Laminate Damage Using Embedded Electrically Active Plies – An Analytical Approach, Amany Micheal, Yehia Bahei-El-Din

Centre for Advanced Materials

Assessment of damage initiation and progression in composite laminates with embedded electrically active plies is modeled. Utilizing electrically active layers embedded in composite laminates as damage sensors is proposed by several researchers and is mainly assessed experimentally. Sensing damage using embedded electrically active plies is generally preferred over the use of surface mounted PZT wafers since the range of the latter is limited to a very narrow area underneath the surface, while multiple damage mechanisms can generally be found in several plies of the laminate. The solution presented invokes two levels of analysis. Firstly, on the laminate level, applied membrane …

Analytical Strip Method For Thin Cylindrical Shells, John T. Perkins

Theses and Dissertations--Civil Engineering

The Analytical Strip Method (ASM) for the analysis of thin cylindrical shells is presented in this dissertation. The system of three governing differential equations for the cylindrical shell are reduced to a single eighth order partial differential equation (PDE) in terms of a potential function. The PDE is solved as a single series form of the potential function, from which the displacement and force quantities are determined. The solution is applicable to isotropic, generally orthotropic, and laminated shells. Cylinders may have simply supported edges, clamped edges, free edges, or edges supported by isotropic beams. The cylindrical shell can be stiffened …

Phased Array Beamsteering In Composite Laminates For Guided Wave Structural Health Monitoring, Peter Osterc

Doctoral Dissertations and Master's Theses

In this study a guided wave phased array beamsteering approach is applied to composite laminates. Current beamsteering algorithms derived for isotropic materials assume omnidirectional wave propagation. Due to inherent anisotropy in composites, guided wave propagation varies with direction and wavefronts no longer have perfect circular shapes.

By examining slowness, velocity and wave curves, as well as amplitude variation with direction for a given composite laminate, the wavefront from a single source can be described as a function of the angle of propagation and distance from origin. Using this approach, a more general delay and sum beamforming algorithm for composite laminates …

Elastic–Plastic Analysis And Strength Evaluation Of Adhesive Joints In Wind Turbine Blades, Yi Hua, Ananth Ram Mahanth Kasavajhala, Linxia Gu

Department of Mechanical and Materials Engineering: Faculty Publications

The objective of this paper is to investigate the performance of adhesive joints of carbon/epoxy wind turbine blade subjected to combined bending and tension loadings through finite element method. The influence of adhesive material properties and geometrical details including fillet and imperfections was examined in terms of interlaminar stresses in the adhesive layer. The variation of stress intensity with change in adhesive shear modulus has also been investigated, while contour integral method was used for evaluating the stress intensity factors (SIF) at the imperfection tip. Furthermore, the strength of the joint was assessed through the crack initiation and propagation analysis. …

Compression After Impact Load Prediction In Graphite/Epoxy Laminates Using Acoustic Emission And Artificial Neural Networks, Anthony Michael Gunasekera

Master's Theses - Daytona Beach

The purpose of this research was to investigate the effectiveness of artificial neural networks (ANNs) in predicting the compression after impact (CAI) load of graphite/epoxy laminates from acoustic emission (AE) nondestructive testing (NDT) data. Thirty-four 24-ply bidirectional woven cloth laminate coupons were constructed and impacted at various energy levels ranging from 8 to 20 Joules, generating barely visible impact damage (BVID). Acoustic emission data were acquired as the coupons were compressed to failure. Not having been analyzed by previous experimenters, several noise tests were also performed to determine the impact of external noise on acoustic emission data during testing. Once …

An Intelligible Software (Cfa) Approach For Fiber-Reinforced Laminate Failure Analysis Including A Piecewise Representation Of The Tsai-Wu Failure Criterion Using Excel And Matlab, Ryan C. Schmidt

Master's Theses - Daytona Beach

Present generations rely heavily on the use of petroleum as their primary means of transportation. As the cost of petroleum continues to escalate, the need for lightweight structures for vehicle applications becomes more evident. The ability to engineer materials so that they possess desired application specific properties and characteristics has made tremendous progress in the past century. Consequently, the use of these composite materials for aircraft weight reduction has been investigated for decades.

The aerospace industry often uses composite materials to make a laminated composite structure where each constituent ply of the laminate has its own material properties. This anisotropic …

Residual Compressive Strength Prediction Of Carbon/Epoxy Laminates Subjected To Low Velocity Impact Damage, Christopher D. Hess

Master's Theses - Daytona Beach

Low energy impact damage to a composite structure is difficult to detect and can have profound effects on compressive strengths. Low energy impact damage is sometimes termed as barely visible impact damage (BVID). Detecting BVID is only possible by implementing nondestructive testing (NDT) techniques. Depending upon the support conditions, material system, laminate thickness, lay-up orientation, and impactor geometry, velocity, and hardness, the types of damage associated with BVID include delaminations, longitudinal and transverse matrix cracks, and in some cases, fiber breaks. Material properties such as the strengths of the matrix, fibers, fiber/matrix interface, and more important for BVID, ply interface …

Nonlinear Analysis Of Unsymmetric Laminates Under Cylindrical Bending, Eun Seon Park

Master's Theses - Daytona Beach

Nonlinear analysis of unsymmetric composite long, narrow laminates under cylindrical bending is studied. The nonlinear governing equations are obtained to analyze the cylindrical bending of arbitrary laminates. The von-Karman type geometrical nonlinearity is incorporated in the governing equation. The shear effect between lamina is further considered in the governing equation. The solution is obtained for different boundary conditions. The results of arbitrary angle-plies are discussed. Unidirectional prepreg graphite-epoxy is considered for numerical results.

Electro-Mechanical Fatigue Behavior Of A Quasi-Isotropic Laminate With An Embedded Piezoelectric Actuator, Tse Lin Hsu

Theses and Dissertations

This study primarily investigated the electro-mechanical fatigue behavior of the embedded piezoelectric actuators in graphite/epoxy laminate with a lay-up of 0 | ± 45 | 90s. A secondary focus was the investigation of the mechanical fatigue effects of the 0 | 0 | ± 45 | 0 | 0 | 90s laminate with embedded PZT under tensile loading. All the fatigue tests were conducted with a triangular loading waveform which had a frequency of 10 Hz and with R=0. 1. In the electro-mechanical testing, the embedded actuator was excited by a -10 V to -100 V or a 10 V …