Structures and Materials Commons^™

Maximum Likelihood Estimation For Distributed Parameter Models Of Large Beam-Like Structures, Ji Yao Shen

Mechanical & Aerospace Engineering Theses & Dissertations

Proposed large space structures have many characteristics that give an advantage to modeling their structural dynamics by a set of partial differential equations (PDE's). By far, the most effort put forth in studying system identification and control to date has been based on finite element models. Despite its acceptability, such lumped parameter models have inevitable deficiencies primarily because of their complexity. Both approaches are complementary and each should be used where it is most effective. But the fact is that the distributed parameter approach has not been developed to the level of maturity as for the lumped parameter approach.

Motivated …

Dynamics And Control Of Two Suspension Mechanisms For Ground-Based Testing Of Space Structures, Joseph E. Wilson

Mechanical & Aerospace Engineering Theses & Dissertations

Two suspension systems which effectively simulate a gravity-free environment are presented. A single degree-of-freedom suspension system utilizing a specially profiled band mechanism in conjunction with a torsional spring is presented to show its feasibility and applicability for use as a ground-based testing device for flexible space structures. The second device, a two degree-of-freedom suspension system consisting of two springs and a folding linkage is presented to show the feasibility as a testing device for suspending space structures on earth.

Problems resulting in unwanted dynamic behavior due to deviations from the design parameters for both systems are addressed. A nonlinear controller …

Integrated Control Of Thermally Distorted Large Space Antennas, Robert H. Tolson

Mechanical & Aerospace Engineering Theses & Dissertations

Studies on controlling the thermal distortion of large space antennae have generally investigated a single orbital position and have optimized actuator locations based on minimizing the RMS surface deviation from the original parabolic shape. One study showed the benefits of directly using far zone electric field characteristics as the performance measure; but, this approach resulted in a nonlinear programming problem. The objective of the current study is to develop an approach to designing a control system that (1) recognizes the time dependence of the distortion and (2) controls variables that are directly related to far field performance in a quadratic …

Navier-Stokes Simulations Of Flows About Complex Configurations Using Domain Decomposition Techniques, Kamran Fouladi-Semnani

Mechanical & Aerospace Engineering Theses & Dissertations

An algorithm is developed to obtain numerical simulations of flows about complex configurations composed of multiple and nonsimilar components with arbitrary geometries. The algorithm uses a hybridization of the domain decomposition techniques for grid generation and to reduce the computer memory requirement. Three dimensional, Reynolds-averaged, unsteady, compressible, and complete Navier-Stokes equations are solved on each of the subdomains by a fully-vectorized, finite-volume, upwind-biased, approximately-factored, and multigrid method. The effect of Reynolds stresses is incorporated through an algebraic turbulence model with several modifications for interference flows. The present algorithm combines the advantages of an efficient, geometrically conservative, minimally and automatically dissipative …

An Experimental Study Of An Axisymmetric Turbulent Boundary Layer Disturbed By A Periodic Freestream, Chithrabhanu Koodalattupuram

Mechanical & Aerospace Engineering Theses & Dissertations

Behavior of an axisymmetric equilibrium turbulent boundary layer disturbed by a propeller wake in the freestream was investigated experimentally. Tests were conducted in a low speed wind tunnel and measurements of turbulence quantities were made using an X wire probe and a constant temperature anemometer. The boundary layer flow on a cylindrical body was characterized by measuring its gross parameters and comparing them with classical values. Propeller speed was measured using an electronic circuit whose output signal was also used to trigger hot wire probe. Gross boundary later characteristics of the disturbed boundary layer did not deviate appreciably from the …

Control And Mechanism Interaction For Ground-Based Testing Of Space Structures, Li-Farn Yang

Mechanical & Aerospace Engineering Theses & Dissertations

In the ground-based validation testing, the adverse effect of terrestrial conditions such as a gravitational force interferes with the dynamic behavior of space structures. A suspension system is developed to assess the structural characteristics in a simulated zero-gravity environment. Using a mechanisms approach, the synthesis of a noncircular disk with a torsional spring at its rotational axis is designed to counteract the gravitational force of test structures during the testing.

The multibody dynamics of a flexible steel beam carried on a rigid trolley has been investigated. The system is constructed in such a way that the rapid and large-angle slewing …

Low Speed Flowfield Characterization By Infrared Measurements Of Surface Temperatures, Ehud Gartenberg

Mechanical & Aerospace Engineering Theses & Dissertations

An experimental program was aimed at identifying areas in low speed aerodynamic research where infrared imaging systems can make significant contributions. Implementing a new technique, a long electrically heated wire was placed across a laminar jet. By measuring the temperature distribution along the wire with the IR imaging camera, the flow behavior was identified. Furthermore, using Nusselt number correlations, the velocity distribution could be deduced. The same approach was used to survey wakes behind cylinders in a wind-tunnel. This method is suited to investigate flows with position dependent velocities, e.g., boundary layers, confined flows, jets, wakes and shear layers. It …

A Finite Element Formulation For The Large Deflection Random Response Of Thermally Buckled Structures, James Eugene Locke

Mechanical & Aerospace Engineering Theses & Dissertations

The effects of temperature and acoustic loading are included in a theoretical finite element large deflection formulation for thin, isotropic plate and beam type structures. Thermal loads are applied as steady-state temperature distributions, and acoustic loads are taken to be stationary and Gaussian with zero mean and uniform magnitude and phase over the surface of the structure. Material properties are considered to be independent of temperature. Also, inplane and rotary inertia terms are assumed to be neglegible, and all inplane edge conditions are taken to be immovable. For the random vibration analysis, cross correlation terms are included.

The nature of …

Structural Self-Shadowing And Its Effects On The Thermal-Structural Behavior Of Orbiting Trusses, Jack Mahaney

Mechanical & Aerospace Engineering Theses & Dissertations

The determination of structural shadowing is described. The computation of environmental heat loads for slender structural members in earth orbit is described, and two methods for finite element thermal analysis are described . The effects of self-shadowing on the thermal structural behavior of single truss members and two different trusses are presented. In each case the shadowing produces a noticeable effect on the temperature distributions on truss members, and on the deformations of the trusses.

Unsteady Transonic Flow Over Slender Bodies, Cevdet Aydun

Mechanical & Aerospace Engineering Theses & Dissertations

The unsteady transonic small disturbance equation for an oscillating slender body is obtained from the full potential equation in cylindrical coordinates by means of a perturbation analysis. The time-dependent body-boundary condition is reduced into a simpler form by matching the outer and inner flows. Also, a time-dependent pressure coefficient over the slender body is derived by means of a matching principle. The simplified form of the body-boundary condition is incorporated into the difference equations at the body axis. This application allows use of the cylindrical coordinate system for the problem. By prescribing several different body-boundary conditions, various modes of body …

On The Space Shuttle Wing Thermal-Structural Analysis, Kumar Krishna Tamma

Mechanical & Aerospace Engineering Theses & Dissertations

A finite element approach for efficient thermal-structural analysis of structures with thermal protection systems (TPS) is described. The approach is applied to Space Shuttle wing structure configurations subjected to reentry heating. New two and three-dimensional finite elements are developed to model heat transfer in the TPS and supporting structure. A typical TPS/Structural element predicts transient nonlinear temperature variations through the TPS thickness and detailed structural temperatures at the TPS/Structure interface. The accuracy of the TPS/Structure approach in two and three-dimensions is evaluated by comparisons with the conventional approach for various configurations of the wing structure. The results indicate that the …

Curing And Flow Of Thermosetting Resins For Composite Materials Pultrusion, Howard L. Price Jr.

Mechanical & Aerospace Engineering Theses & Dissertations

Fibrous composite materials for mechanical and structural applications often are expensive due to high labor costs. One economical way of making composites is pultrusion, a manufacturing process in which resin-impregnated fibers are pulled at a constant speed through a heated die which shapes the resin-fiber mass and cures the resin. Most of the work which has been done on the process has been of an empirical nature, with limited understanding of the process principles. Most of the experience with pultrusion has been gained with polyester resins and glass fibers. Very little experience has been gained with higher performance, more costly …