Space Vehicles Commons^™

Space Exploration: Nasa Investment Into The Private Space Sector And Public Opinion, Brooke Ziegenhagen

Senior Theses

The space exploration industry has entered a new era with companies such as SpaceX and Blue Origin leading the way to the privatization of space. This paper examines public opinion regarding the source of space exploration funding and proposes possible motivations for these sentiments. This is followed by an assessment on NASA’s investment trends into the commercial space industry. Both probes review the past decade, to reveal the public-private relationship in this new era and finally, conclude whether or not public opinion plays a role in the degree of NASA investment and what that role may be.

Investigation Of Trajectory And Control Designs For A Solar Sail To The Moon, Michelle Nadeau

Doctoral Dissertations and Master's Theses

NASA’s Artemis program and other government and commercial projects are working toward establishing a sustainable human presence on the moon. This thesis investigates the technical feasibility of a solar sail-based spacecraft (sailcraft) as a low-cost method of delivering cargo or science instruments to the moon and demonstrates how this sailcraft could be controlled to change its orbit. The concept is a low-cost, commercial launch vehicle-deployable, CubeSat-based sailcraft with a square sail, assumed attitude control, and a small payload traversing from low-Earth orbit toward the moon with zero propellant use. In this thesis, methods for sailcraft to increase altitude, the trajectory …

Data-Driven Cfd Scaling Of Bioinspired Mars Flight Vehicles For Hover, Jeremy A. Pohly, Chang-Kwon Kang, Brian D. Landrum, James E. Bluman, Hikaru Aono

PRC-Affiliated Research

One way to improve our model of Mars is through aerial sampling and surveillance, which could provide information to augment the observations made by ground-based exploration and satellite imagery. Flight in the challenging ultra-low-density Martian environment can be achieved with properly scaled bioinspired flapping wing vehicle configurations that utilize the same high lift producing mechanisms that are employed by insects on Earth. Through dynamic scaling of wings and kinematics, we investigate the ability to generate solutions for a broad range of flapping wing flight vehicles with masses ranging from insects O(10−3) kg to the Mars helicopter Ingenuity O(100) kg. A …

Data-Driven Cfd Scaling Of Bioinspired Mars Flight Vehicles For Hover, Jeremy A. Pohly, Chang-Kwon Kang, Brian D. Landrum, James E. Bluman, Hikaru Aono

PRC-Affiliated Research

One way to improve our model of Mars is through aerial sampling and surveillance, which could provide information to augment the observations made by ground-based exploration and satellite imagery. Flight in the challenging ultra-low-density Martian environment can be achieved with properly scaled bioinspired flapping wing vehicle configurations that utilize the same high lift producing mechanisms that are employed by insects on Earth. Through dynamic scaling of wings and kinematics, we investigate the ability to generate solutions for a broad range of flapping wing flight vehicles with masses ranging from insects O(10−3) kg to the Mars helicopter Ingenuity O(100) kg. A …

Low-Cost Terrestrial Demonstration Of Autonomous Satellite Proximity Operations, Zackary R. Hewitt

Theses and Dissertations

The lack of satellite servicing capabilities significantly impacts the development and operation of current orbital assets. With autonomous solutions under consideration for servicing, the purpose of this research is to build and validate a low-cost hardware platform to expedite the development of autonomous satellite proximity operations. This research aims to bridge the gap between simulation and existing higher fidelity hardware testing with an affordable alternative. An omnidirectional variant of the commercially available TurtleBot3 mobile robot is presented as a 3-DOF testbed that demonstrates a satellite servicing inspection scenario. Reference trajectories for the scenario are generated via optimal control using the …

Impendance Probe Payload Development For Space-Based Joint Service Collaboration, Brian T. Kay

Theses and Dissertations

Collaborations utilizing small spacecraft in near earth orbit between the U. S. Coast Guard Academy (CGA), Naval Research Lab (NRL), the U. S. Naval Academy (USNA), and the Air Force Institute of Technology (AFIT) have initiated scientific and engineering space-based experiments. Sourced opportunities like the VaSpace ThinSat missions have provided a platform for payload, sensor, and experiment development that would have otherwise been resource prohibitive. We have constructed an impedance probe payload derived from the existing ‘Space PlasmA Diagnostic suitE’ (SPADE) mission operating from NASA’s International Space Station. Currently both space and laboratory plasmas are investigated with AC impedance measurements …

Spacecraft Informatics, K. L. Yung, Lida Xu, Chris Zhang

Information Technology & Decision Sciences Faculty Publications

No abstract provided.

Molten Regolith Electrolysis Processing For Lunar Isru: Financial And Physics Analysis Of Spacex Starship Transportation, Cheyenne Harper

Honors Undergraduate Theses

The purpose of the following research is to explore molten regolith electrolysis (MRE) methodology for in-situ resource utilization (ISRU) of Highlands lunar regolith, to be explored during the initial Artemis missions. An analysis of potential commercial launch providers for MRE-equipment based on technology-readiness level (TRL), payload mass support, and $ USD/kg payload price is provided. SpaceX is ultimately proposed as a launch provider of MRE equipment following multi-factorial analysis, with the SpaceX Starship human landing system (HLS) variant proposed for supporting MRE payload. Finally, customers of regolith-derived oxygen, aluminum, and silicon are distinguished to form the business case for operating …

Simulating Ejecta Blown Off The Lunar Surface Due To Landing Spacecraft Using The Mercury N-Body Integrator, Isabel Rivera

Electronic Theses and Dissertations, 2020-2023

The experiences of the Apollo lunar landings revealed the danger lunar dust can pose to surrounding hardware, outposts, and orbiting spacecraft. Future lunar missions such as the Artemis program will require more information about the trajectories of ejecta blown by landers to protect orbiting spacecraft such as the Lunar Gateway. In this paper, we simulate lunar lander ejecta trajectories using the Mercury N-body integrator. We placed cones of test particles on the Moon at the North Pole, South Pole, and Equator with various ejection speeds and angles. The results show that particles ejected at speeds near the Moon's escape velocity …

The Kentucky Re-Entry Universal Payload System (Krups): Orbital Flight, James Tyler Nichols

Theses and Dissertations--Mechanical and Aerospace Engineering

Due to the uniqueness of atmospheric entry environments, ground facilities cannot accurately replicate re-entry conditions. Consequently, scientists primarily rely on numerical models to predict these conditions and inform Thermal Protection System (TPS) designs. These models often lack flight validation, which is necessary for increasing their fidelity. Thus, there is a substantial need to obtain such data to advance modeling capabilities.

The Kentucky Re-entry Universal Payload System (KRUPS) is an adaptable test-bed for scientific experimentation with initial application to TPS. This vehicle was designed at the University of Kentucky to serve as an inexpensive means of obtaining validation data to enhance …

Structural Optimization Of Space Transit Vehicle Concept, Hercules, James Philip Rogers

Theses and Dissertations--Mechanical and Aerospace Engineering

STRUCTURAL OPTIMIZATION OF SPACE TRANSIT VEHICLE CONCEPT, HERCULES:

A COMPARATIVE STUDY OF STRUCTURAL OPTIONS

Hercules is a vehicle concept developed by NASA Langley's Vehicle Analysis Branch to satisfy the need for sustainable transit between Earth, the moon, and Mars. Hercules features unprecedented abort capabilities and mission flexibility to aid in NASA's Mars campaign. By utilizing modern software to perform structural analysis and optimization for a large selection of stiffened panel concepts, beam concepts, and materials trends in the structural optimization emerge. These trends will be invaluable for the design of future spacecraft needed to fulfill similar roles.

The structural optimization …

Estimation Of Spacecraft Attitude Motion And Vibrational Modes Using Simultaneous Dual-Latitude Ground-Based Data, Zachary William Henry

Doctoral Dissertations and Master's Theses

Cutting-edge Space Situational Awareness (SSA) research calls for improved methods for rapidly characterizing resident space objects. In this thesis, this will take the form of speeding up convergence of spacecraft attitude estimates, and of a non-model-based approach to the detection of vibrational modes. Because attitude observability from photometric data is angle-based, dual-site simultaneous photometric observations of a resident space object are predicted to improve the convergence speed and steady-state error of spacecraft attitude state estimation from ground-based sensor data. Additionally, it is predicted that by adding polarimetric data to the measurements, the speed of convergence and steady-state error will be …

Active Gravity Offloading System With Infrared Tracking For Rover Testing, Travis Wavrunek

Dissertations, Master's Theses and Master's Reports

Gravity offloading is a tool used to test how different gravitational forces will impact the mobility of rovers bound for Lunar or Martian expeditions. Previous approaches have been successful in simulating partial gravity environments, and this report details how the Infrared- Gravity offload (IRGO) system, developed for the Planetary Surface Technology Development Laboratory (PSTDL) and lunar simulant sandbox, has a similar aim. Through a series of iterations, IRGO has been developed to actively track an infrared beacon and follow a rover within the test chamber to eliminate inertial and friction forces along two horizonal axes. A portion of a rover’s …

Commissioning And Testing Of A New Dusty Thermal Vacuum Chamber, Ben Wiegand

Dissertations, Master's Theses and Master's Reports

The Dusty Thermal Vacuum Chamber (DTVAC) is a new facility purchased by the Planetary Surface Technology Development Lab (PSTDL) that will be used to test the Technology Readiness Level (TRL) of extraplanetary devices and systems. With the use of vacuum pumps and simulated regolith, the DTVAC can create extraplanetary environments such as those found on the Moon and Mars. This report details the actions that were taken to prepare the DTVAC for TRL testing, including the development of a Data Acquisition Center (DAC) and test fixtures, along with the findings of baseline tests that were performed to understand the behavior …

Numerical Analysis Of Aerospike Engine Nozzle Performance At Various Truncation Lengths, Sam Dakka Dr, Oliver Dennison

International Journal of Aviation, Aeronautics, and Aerospace

The aerospike engine was first devised in the early 1960s where it provided new means of reaching orbit in a single stage. The paper aimes to demonstrate the viability of the technology by showcasing the increased nozzle thrust efficiency over the conventional bell nozzle. Various truncations were applied to the nozzle and each was subjected to two conditions, an over-expansion and near optimum condition. The nozzle contour was developed using the simple approximation method and was chosen to replicate that of the XRS-2200. This anchored the data, thereby validating the computational fluid dynamics (CFD) simulation. Simulations were completed for at …

Planetary Rover Inertial Navigation Applications: Pseudo Measurements And Wheel Terrain Interactions, Cagri Kilic

Graduate Theses, Dissertations, and Problem Reports (ETD)

Accurate localization is a critical component of any robotic system. During planetary missions, these systems are often limited by energy sources and slow spacecraft computers. Using proprioceptive localization (e.g., using an inertial measurement unit and wheel encoders) without external aiding is insufficient for accurate localization. This is mainly due to the integrated and unbounded errors of the inertial navigation solutions and the drifted position information from wheel encoders caused by wheel slippage. For this reason, planetary rovers often utilize exteroceptive (e.g., vision-based) sensors. On the one hand, localization with proprioceptive sensors is straightforward, computationally efficient, and continuous. On the other …

Updates And Improvements To The Satellite Drag Coefficient Response Surface Modeling Toolkit, Phillip Logan Sheridan

Graduate Theses, Dissertations, and Problem Reports (ETD)

For satellites in Low Earth Orbit, the drag coefficient is a major area of uncertainty. Researchers at the Los Alamos National Laboratory have created a Response Surface Modeling (RSM) toolkit to provide the community with a resource for simulating and modeling satellite drag coefficients in Free Molecular Flow. The toolkit combines the high fidelity of numerical simulation techniques with the speed of regression modeling. Specifically, it uses a training sample of drag coefficients simulated with the Test Particle Monte Carlo method with the robust Gaussian Process Regression approach. The RSM toolkit is the prime process to become a toolkit of …