Open Access. Powered by Scholars. Published by Universities.®
- Discipline
-
- Heat Transfer, Combustion (18)
- Mechanical Engineering (18)
- Physical Sciences and Mathematics (10)
- Physics (10)
- Aeronautical Vehicles (6)
-
- Space Vehicles (5)
- Aerodynamics and Fluid Mechanics (4)
- Plasma and Beam Physics (4)
- Electrical and Computer Engineering (3)
- Electromagnetics and Photonics (3)
- Fluid Dynamics (3)
- Atomic, Molecular and Optical Physics (2)
- Ceramic Materials (2)
- Chemical Engineering (2)
- Materials Science and Engineering (2)
- Thermodynamics (2)
- Aviation (1)
- Business (1)
- Commercial Space Operations (1)
- Management and Operations (1)
- Navigation, Guidance, Control and Dynamics (1)
- Nuclear Engineering (1)
- Optics (1)
- Other Aerospace Engineering (1)
- Other Materials Science and Engineering (1)
- Other Physics (1)
- Transportation and Mobility Management (1)
- Keyword
-
- #csra (12)
- Electric propulsion (9)
- Combustion (7)
- Detonation waves (6)
- Airplanes--Scramjet engines (5)
-
- Heat--Transmission (5)
- Rotating detonation engine (5)
- Combustion chambers (4)
- Fluid dynamics (4)
- Space vehicles--Propulsion systems (4)
- Turbines (4)
- Additive manufacturing (3)
- Detonation combustion (3)
- Hydrocarbons (3)
- Internal combustion engines (3)
- Jet planes--Fuel (3)
- Rocket propulsion (3)
- Thermodynamics (3)
- #antcenter (2)
- Airplanes--Motors--Thrust (2)
- Airplanes--Turbojet engines (2)
- Combustion engineering (2)
- Combustion--Mathematical models (2)
- Drone aircraft (2)
- Film cooling (2)
- Gas-turbine plants (2)
- Hall Effect (2)
- Hall Effect thrusters (2)
- Hall effect devices (2)
- Ion rockets (2)
- Publication Year
- Publication Type
Articles 31 - 60 of 124
Full-Text Articles in Propulsion and Power
Application Of Spectral Solution And Neural Network Techniques In Plasma Modeling For Electric Propulsion, Joseph R. Whitman
Application Of Spectral Solution And Neural Network Techniques In Plasma Modeling For Electric Propulsion, Joseph R. Whitman
Theses and Dissertations
A solver for Poisson's equation was developed using the Radix-2 FFT method first invented by Carl Friedrich Gauss. Its performance was characterized using simulated data and identical boundary conditions to those found in a Hall Effect Thruster. The characterization showed errors below machine-zero with noise-free data, and above 20% noise-to-signal strength, the error increased linearly with the noise. This solver can be implemented into AFRL's plasma simulator, the Thermophysics Universal Research Framework (TURF) and used to quickly and accurately compute the electric field based on charge distributions. The validity of a machine learning approach and data-based complex system modeling approach …
Reconstruction Of The 3d Temperature And Species Concentration Spatial Distribution Of A Jet Engine Exhaust Plume Using An Infrared Fourier Transform Spectrometer Hyperspectral Imager, Mason D. Paulec
Theses and Dissertations
The measurement of combustion byproducts is useful for determining pollution of any fuel burning application, efficiency of combustion, and determining detectability of aircraft exhausts. Both intrusive and non-intrusive techniques have been utilized to measure these quantities. For the majority of the non-intrusive techniques, the absorption and emission spectra of the gases are utilized for measurements. For this research, the use of the Telops Infrared Fourier Transform Spectrometer (IFTS) Hyperspectral Imager (HSI) was explored within the scope of combustion diagnostic methods, as an option for remote measurements of a jet turbine to determine concentration of species and temperature of the combustion …
Investigation Of A Pressure Wave Supercharger For An Industrial Diesel Engine, Brian A. Beasley
Investigation Of A Pressure Wave Supercharger For An Industrial Diesel Engine, Brian A. Beasley
Theses and Dissertations
Internal combustion engines suffer from decreased performance as altitude is in- creased. This performance decrease can be overcome by increasing the pressure in the engine's intake manifold. Typically, this is accomplished with a turbocharger or supercharger. However, mechanical compression devices such as these suffer from decrease compression efficiency as the size of the device decreases. The size of the compression device scales with the amount of mass ow through the device, and the amount of mass ow is proportional to the size of the engine. This means a small turbocharger for a small engine is less efficient than a larger …
Design, Buildup, And Testing Of A Radial Rotating Detonation Engine For A Compact Auxiliary Power Unit, Riley Huff
Design, Buildup, And Testing Of A Radial Rotating Detonation Engine For A Compact Auxiliary Power Unit, Riley Huff
Theses and Dissertations
Current power generators consume a large portion of the aircrafts usable volume and they are also extremely heavy for the amount of power that they can produce. Therefore, a need for compact, lightweight Auxiliary Power Units (APU) with high power density has arisen. A novel solution to this problem comes in the form of coupling a Rotating Detonation Engine (RDE) with a turbine generator. A new type of RDE referred to as the Radial Rotating Detonation Engine (RRDE) has been developed to fill this need. This project marks the first radial ow RDE successfully operated in the United States, and …
Characterization And Analysis Of Plasma Instabilities In A 600 W Permanent Magnet Hall Thruster, Samuel D. Wright
Characterization And Analysis Of Plasma Instabilities In A 600 W Permanent Magnet Hall Thruster, Samuel D. Wright
Theses and Dissertations
Electric propulsion is an important technology for the future of space operations and exploration. Within the range of electric propulsion devices, Hall Effect Thrusters provide a balance of thrust and specific impulse well-suited for many Earth-centric missions. Hall Effect Thrusters have been studied since their development in the 1960s and have been flown on hundreds of spacecraft, but the intimate details of the plasma behavior within the thruster exhaust plume are still not well understood. Furthering this knowledge may be key to improving thruster design to yield better performance and longer lifetimes. To this end, experiments were conducted to measure …
Analysis Of Additively Manufactured Injectors For Rotating Detonation Engines, Michael C. Waters
Analysis Of Additively Manufactured Injectors For Rotating Detonation Engines, Michael C. Waters
Theses and Dissertations
This research represents an experimental and computational analysis of additively manufactured injectors for Rotating Detonation Engines (RDEs) for use in rocket propulsion. This research was based on the manufacture and testing of existing injector element designs using additive techniques. The designs were modeled from geometries gathered from Sutton and Biblarz Elements of Rocket Propulsion [23]. The goal of this research was to characterize the viscous losses of each design based on the discharge coefficient. The designs were computationally simulated to gain insight to the flow characteristics using multiple sets of conditions for surface roughness and inlet pressure. The results were …
Hall Effect Thruster Characterization Through Potential, Magnetic, And Optical Measurements, Nicholas L. Hyatt
Hall Effect Thruster Characterization Through Potential, Magnetic, And Optical Measurements, Nicholas L. Hyatt
Theses and Dissertations
Electric propulsion is a promising method for providing ΔV to spacecraft on orbit. In general, much higher ISPS are obtained compared to their chemical counterparts. Hall thrusters are a subset of electric propulsion with moderately high specific impulse and thrust when compared to other forms of electric propulsion. Even though Hall thrusters have an extensive flight legacy around the world, there are still many unknowns associated with their operation. Experimental research was conducted in AFIT’s Space Propulsion Application Simulation System (SPASS) laboratory, to measure Hall current, plasma potential and visible emission from the 600W Hall thruster in a …
The Scaling Of Loss Pathways And Heat Transfer In Small Scale Internal Combustion Engines, Joseph K. Ausserer
The Scaling Of Loss Pathways And Heat Transfer In Small Scale Internal Combustion Engines, Joseph K. Ausserer
Theses and Dissertations
Prior literature indicates fuel conversion efficiency and normalized power deteriorate increasingly rapidly with decreasing displacement, but does not fully reveal the driving losses. The literature also suggested that increasing losses relax the required fuel anti-knock index (AKI), but offered conflicting conclusions on the performance impact. This comprehensive experimental study of three, 28 cm3 to 85 cm3 displacement, commercial-off-the-shelf (COTS), two-stroke ICEs identified short-circuiting as having the most deleterious impact on COTS engine performance in this size range. Heat transfer losses were comparable to larger engines for displaced volumes greater than 10 cm3. An engine friction model was developed that uses …
Design And Experimentation Of A Premixed Rotating Detonation Engine, Ionio Q. Andrus
Design And Experimentation Of A Premixed Rotating Detonation Engine, Ionio Q. Andrus
Theses and Dissertations
Desire for a more efficient air breathing engine has shifted research attention to the Rotating Detonation Engine (RDE). Detonation is a more efficient combustion process than deflagration and provides a pressure gain. The RDE detonation cycle occurs in a compact volume to produce a high specific impulse engine. Computational fluid dynamic (CFD) models have predicted higher specific impulse and detonation wave speeds than has been seen in experimental RDE. The CFD models frequently assume premixed reactants and ignore inlet geometries to facilitate rapid computation. An experimental premixed RDE was sought to test if the premixed assumption in CFD was the …
Design, Manufacturing, And Testing Of A Small Through-Flow Wave For Use Within The Brayton Cycle, Micahel J. Mcclearn
Design, Manufacturing, And Testing Of A Small Through-Flow Wave For Use Within The Brayton Cycle, Micahel J. Mcclearn
Theses and Dissertations
With the ever growing popularity of drones and other unmanned aerial vehicles for military, commercial, and private usage, there is a desire to improve performance in terms of range, altitude, and flight speed. Current technology uses either electric motors or internal combustion engines: both piston and jet engine types. These sorts of engines undergo significant efficiency degradation as their size decreases. While some efficiency may be recovered via intensive design studies, the cycles are approaching the limit to their operating physics. A possible solution to this is to change the operating physics to something more immune to scaling losses; a …
Localized Plasma Measurement During Instability Modes In A Hall Thruster, David A. Cunningham
Localized Plasma Measurement During Instability Modes In A Hall Thruster, David A. Cunningham
Theses and Dissertations
Hall thrusters are a key technology for current and future unmanned satellites, striking a balance between thrust and fuel economy suitable for many mission profiles of interest. Despite their extensive flight heritage and a large body of research, many phenomena occurring in the plasma discharge of Hall thrusters are not well understood. A combination of intrusive and non-intrusive measurement techniques were used to investigate the properties of the exhaust plume of two Hall thrusters and correlate optical characteristics of oscillating modes with the plasma potential and azimuthal current distribution during those modes. A strong trend was found associating the optical …
Enhanced Flow Migration In Full Annular Ultra Compact Combustor, Nicholas A. Gilbert
Enhanced Flow Migration In Full Annular Ultra Compact Combustor, Nicholas A. Gilbert
Theses and Dissertations
Since combustion efficiency in modern jet engines has stabilized, attention has turned to improving the combustor by improving the thrust-to-weight ratio. The Ultra Compact Combustor (UCC) is a means to reduce the weight of the combustor while ensuring exhaust meets increasingly stringent government emission standards. Combustion occurs within the UCC under a g-load in the circumferential direction, which maintains combustion efficiency while decreasing axial combustor length. Previous analysis optimized the combustion chamber flame characteristics with a common upstream air source. Previously, issues for the UCC were inspired by integration into a traditional axial turbojet. The focus of this investigation was …
Spectroscopic Measurement Of Gas Temperature In Small Internal Combustion Engines, Matthew J. Deutsch
Spectroscopic Measurement Of Gas Temperature In Small Internal Combustion Engines, Matthew J. Deutsch
Theses and Dissertations
The Small Engine Research Bench (SERB) was used previously to measure spatially and temporally averaged heat flux, as well as local, instantaneous heat flux at several external locations, for a series of small engines (1 - 10 kW). This investigation obtained time averaged crank angle resolved measurements of the in-cylinder gas temperature using Fourier transform infrared (FTIR) absorption thermometry. The results, coupled with heat flux measurements, will enable the validation or refinement of existing thermal energy loss models.
Performance Testing Of Various Nozzle Design For Water Electrolysis Thruster, Yuen Liu
Performance Testing Of Various Nozzle Design For Water Electrolysis Thruster, Yuen Liu
Theses and Dissertations
The purpose of this research is to develop new nozzles for the HYDROSTM thruster, a pulsed chemical thruster, to improve the current flight performance. This research consists of a base line test of the factory nozzle, as well as testing of three 15-degree conical nozzles with different expansion ratios. Experiments were conducted at plenum pressures 30, 40, and 45 psia to ensure the thruster is throttleable. Impulse bit data was collected through measuring the impulse response of each firing using a torsional balance thrust stand. Analysis of the thruster performance included calculations of impulse bit, specific impulse, thrust coefficient, …
Overall Effectiveness Measurement At Engine Temperatures With Reactive Film Cooling And Surface Curvature, Andrew J. Lynch
Overall Effectiveness Measurement At Engine Temperatures With Reactive Film Cooling And Surface Curvature, Andrew J. Lynch
Theses and Dissertations
The thesis presented here details the design, construction and initial testing of rig for use with high temperature film cooling testing. The film cooling rig was supplied with hot mainstream gas from a well-stirred reactor operating on a propane/air mixture capable of multiple equivalence ratios. The Hastelloy test plates contained an internal cooling channel to allow for overall effectiveness measurements. Thermocouples on both the freestream and internal surfaces of the test plate provided temperature differences for heat flux calculations. The test plates had a quarter circle leading edge with a tapered trailing edge to provide surface curvature for the film …
Computer Modeling Of A Rotating Detonation Engine In A Rocket Configuration, Nihar Shah
Computer Modeling Of A Rotating Detonation Engine In A Rocket Configuration, Nihar Shah
Theses and Dissertations
Detonation-based combustors leverage the higher thermodynamic efficiency of the Atkinson cycle compared to the traditional deflagration-based combustion of the Brayton cycle. The rotating detonation engine (RDE) has one or more shock waves rotating around an annulus. The RDE can theoretically be 20% more thermally efficient than a traditional deflagration-based cycle. A RDE was modeled in Numerical Propulsion System Simulation (NPSS) based on a model developed in Microsoft Excel. The thermodynamic analysis of the RDE in these models is broken into four streams. Empirical models were used to find the percentage of the total flow in each stream. The pre-detonation pressure …
Design And Evaluation Of Dual-Expander Aerospike Nozzle Upper Stage Engine, Joseph R. Simmons Iii
Design And Evaluation Of Dual-Expander Aerospike Nozzle Upper Stage Engine, Joseph R. Simmons Iii
Theses and Dissertations
The goal of the Dual-Expander Aerospike Nozzle, a modification to traditional engine architectures, is to find those missions and designs for which it has a competitive advantage over traditional upper stage engines such as the RL10. Previous work focused on developing an initial design to demonstrate the feasibility of the Dual-Expander Aerospike Nozzle. This research expanded the original cycle model in preparation for optimizing the engine's specific impulse and thrust-to-weight ratio. The changes to the model allowed automated parametric and optimization studies. Preliminary parametric studies varying oxidizer-to-fuel ratio, total mass flow, and chamber length showed significant improvements. Drawing on modeling …
Thermal Loss Determination For A Small Internal Combustion Engine, Joshua A. Rittenhouse
Thermal Loss Determination For A Small Internal Combustion Engine, Joshua A. Rittenhouse
Theses and Dissertations
Three analysis techniques were used to measure the heat rejection of a 55 cc air-cooled two-stroke engine. This study was performed as part of a larger effort aimed at extending range and endurance limitations of Group 1 & 2 Remotely Piloted Aircraft (RPA). The engine selected for the study was a 55 cc gasoline-fueled, carbureted, spark-ignition engine made by 3W-Modellmotoren and is representative of RPA engines in these groups. With a surface area to volume ratio of 1.48 1/cm, the engine is in a size region where thermal losses begin to dominate engine efficiency and thermal efficiencies …
The Use Of An Ultra-Compact Combustor As An Inter-Turbine Burner For Improved Engine Performance, Jose L. Miranda
The Use Of An Ultra-Compact Combustor As An Inter-Turbine Burner For Improved Engine Performance, Jose L. Miranda
Theses and Dissertations
An Inter-Turbine Burner (ITB) represents a novel mechanism for generating additional work from a gas turbine engine in applications where an afterburner would typically be used. An ITB can achieve higher thermal efficiencies over a typical afterburner while also generating shaft work versus only additional thrust. In an effort to investigate the potential applications for the ITB, a numerical engine cycle comparison was made between the ITB cycle and a conventional afterburning cycle using the Numerical Propulsion System Simulation (NPSS). In the case of thrust augmentation, the ITB model outperformed the afterburning model when Thrust Specific Fuel Consumption (TSFC) is …
Computational Simulation Of Explosively Generated Pulsed Power Devices, Mollie C. Drumm
Computational Simulation Of Explosively Generated Pulsed Power Devices, Mollie C. Drumm
Theses and Dissertations
Technology and size constraints have limited the development of the end game mechanisms of today's modern military weapons. A smaller, more efficient means of powering these devices is needed, and explosive pulsed power devices could be that answer. While most prior research has been in the experimental field, there is a need for more theory-based research and a computer modeling capability. The objective of this research was to use experimental data collected by the US Army at Redstone Arsenal from their ferroelectric generator (FEG) design in combination with the ALEGRA-EMMA code to develop a computer model that can accurately represent …
Scaling Study Of Wave Rotor Turbo-Normalization Of A Small Internal Combustion Engine, Brandon D. Smith
Scaling Study Of Wave Rotor Turbo-Normalization Of A Small Internal Combustion Engine, Brandon D. Smith
Theses and Dissertations
One issue facing small Remotely Piloted Aircraft engines is their ability to maintain performance at altitude. Since many of these aircraft use commercial off the shelf engines originally designed for radio controlled aircraft and lawn care implements, the reduced pressure environment significantly degrades the operability of the engine as the altitude increases. An option to overcome this difficulty is to supercharge the system; however most superchargers are designed for larger, typically automotive, engines. As a supercharger's size is decreased, there are large efficiency losses. Therefore, there is a need to accomplish this function on a smaller scale without. One option …
Unsteady Specific Work And Isentropic Efficiency Of A Radial Turbine Driven By Pulsed Detonations, Kurt P. Rouser
Unsteady Specific Work And Isentropic Efficiency Of A Radial Turbine Driven By Pulsed Detonations, Kurt P. Rouser
Theses and Dissertations
There has been longstanding government and industry interest in pressure-gain combustion for use in Brayton cycle based engines. Theoretically, pressure-gain combustion allows heat addition with reduced entropy loss. The pulsed detonation combustor (PDC) is a device that can provide such pressure-gain combustion and possibly replace typical steady deflagration combustors. The PDC is inherently unsteady, however, and comparisons with conventional steady deflagration combustors must be based upon time-integrated performance variables. In this study, the radial turbine of a Garrett automotive turbocharger was coupled directly to and driven, full admission, by a PDC in experiments fueled by hydrogen or ethylene. Data included …
Build Up And Operation Of An Axial Turbine Driven By A Rotary Detonation Engine, Jonathan R. Tellefsen
Build Up And Operation Of An Axial Turbine Driven By A Rotary Detonation Engine, Jonathan R. Tellefsen
Theses and Dissertations
Detonation combustors provide advantages over current deflagration combustors due to their pressure gain and simplicity of design. Rotary detonation engines (RDEs) offer advantages over pulsed detonation engines (PDEs) due to a steadier exhaust and fewer total system losses. All previous research on turbine integration with detonation combustors has focused on utilizing PDEs to drive axial and centrifugal turbines. The objective of this thesis was the integration and testing of an axial turbine driven by a rotary detonation engine (RDE) to determine turbine operability. In pursuit of this objective, convergent nozzle sections were placed on the RDE to simulate the back-pressurization …
Cooling Requirements For The Ultra Compact Combuster, Donald D. Johnson
Cooling Requirements For The Ultra Compact Combuster, Donald D. Johnson
Theses and Dissertations
Over the past several years, AFIT and the Air Force Research Laboratory have collaboratively investigated a novel combustor system that is compact in design and has potential use in an inter-turbine burner system. The ultra-compact combustor (UCC) design wraps the combustion section circumferentially around the axial core flow and exploits the use of high-g combustion. The combustor's volume and weight are reduced by integrating the exit compressor vane and the turbine inlet vane. This creates a new hybrid vane that resides directly below the circumferential combustor. Recently, a computational effort to understand the fundamental aspects of the UCC on a …
Desensitizing Flame Structure And Exhaust Emissions To Flow Parameters In An Ultra-Compact Combuster, Adam K. Parks
Desensitizing Flame Structure And Exhaust Emissions To Flow Parameters In An Ultra-Compact Combuster, Adam K. Parks
Theses and Dissertations
A major thrust of turbine engine research is to improve both efficiency and thrust-to-weight ratio of the engine. A promising solution to this challenge is the Ultra-Compact Combustor (UCC). The UCC shortens the axial length of the combustor by performing combustion circumferentially on the outer diameter of the engine. The reduction in axial length yields significant weight savings and increases the thrust-to-weight ratio. The design also increases combustion efficiency by performing the combustion in a centrifugally loaded environment which allows unreacted particles to remain in the combustor sufficiently long enough to become combustion products. The Air Force Institute of Technology …
Development And Testing Of A Rotating Detonation Engine Run On Hydrogen And Air, Jason C. Shank
Development And Testing Of A Rotating Detonation Engine Run On Hydrogen And Air, Jason C. Shank
Theses and Dissertations
Rotating detonation engines (RDEs) have the potential for greater efficiencies over conventional engines by utilizing pressure gain combustion. A new modular RDE (6 in diameter) was developed and successfully run on hydrogen and standard air. The RDE allows for variation of injection scheme and detonation channel widths. Tests provided the operational space of the new RDE as well as characterized detonation unsteadiness. It was found that a smaller equivalence ratio than previous was required to obtain continuous detonations. Also discovered was VCJ was reached in the RDE, but not sustained.
Analysis Of Flow Migration In An Ultra-Compact Combustor, Brian T. Bohan
Analysis Of Flow Migration In An Ultra-Compact Combustor, Brian T. Bohan
Theses and Dissertations
One of the major efforts for turbine engine research is to improve the thrust to weight of the system. One novel concept for accomplishing this is the use of an Ultra-Compact Combustor (UCC). The UCC attempts to shorten the overall combustion length (thereby reducing weight) by performing the combustion in the circumferential direction along the outside diameter of the core flowpath. One of the major benefits of this design is enhanced combustion due to the establishment of a high-g field in the circumferential cavity. AFIT and the Air Force Research Laboratory (AFRL) have been teamed for several years in understanding …
Performance Characterization Of A Three-Axis Hall Effect Thruster, Spencer E. Temkin
Performance Characterization Of A Three-Axis Hall Effect Thruster, Spencer E. Temkin
Theses and Dissertations
No abstract provided.
Velocity Plume Profiles For Hall Thrusters Using Laser Diagnostic, Daniel B. Lee
Velocity Plume Profiles For Hall Thrusters Using Laser Diagnostic, Daniel B. Lee
Theses and Dissertations
This research built a non-intrusive laser diagnostic tool using Laser Induced Fluorescence (LIF) and absorption techniques to measure the velocity and density plume profiles of low powered Hall thrusters. This tool was then applied to a Busek 200W Hall thruster to validate the performance against previous research on the same thruster. A laser frequency sweep through 834.72 nm produced LIF signals for ionized xenon –collected at 541.9 nm – in the thruster plume and absorption data outside the plume at a neutral transition at 834.68 nm. The absorption data provided a baseline reference to calculate the axial and radially velocity …
Analysis Of Hybrid-Electric Propulsion System Designs For Small Unmanned Aircraft Systems, Ryan M. Hiserote
Analysis Of Hybrid-Electric Propulsion System Designs For Small Unmanned Aircraft Systems, Ryan M. Hiserote
Theses and Dissertations
Currently fielded electric-powered small unmanned aircraft systems (UAS) lack the endurance desired by warfighters, while their internal combustion engine (ICE) driven counterparts generate mission compromising acoustic and thermal signatures. Parallel hybrid-electric propulsion systems would meet the military’s needs by combining the advantages of hydrocarbon and electric power systems. Three distinct parallel hybrid-electric system designs, each with three unique battery discharging profiles, were analyzed and compared using a constrained static optimization formulation based upon traditional aircraft design equations. Each system combined an ICE sized for cruise speed with an electric motor sized for endurance speed. The nine hybrid variations were compared …