Other Aerospace Engineering Commons^™

Flight Testing In A Simulation Based Environment, David W. Babka

Aerospace Engineering

Over the past two decades performance flight testing of full scale aircraft has transferred some of the testing workload to simulation based systems.  Flight testing full scale aircraft in the real world environment has always been expensive, especially now with the rise in aviation fuel costs. Additionally, new emerging technologies require extensive testing and doing so in the full scale environment is cost prohibitive.  A cheaper alternative is to test systems in a simulation based environment.  Not only can aircraft be simulated via a computer, but all the aircrafts systems can be modeled in the simulation.  Furthermore, most of the …

Modeling And Preliminary Finite Element Analysis On The Spun Structure For The Cpintersep Project, Jason Carpenter, Kelly Cheng, Jeffrey Ma, Richard Pelham, Kevin Povey

Aerospace Engineering

This paper details the process of modeling and importing the model into FEA for the spun structure of the BS376 spacecraft. Engineering drawings were converted into 3D models using Pro/Engineer and then imported and into Patran for pre-processing of a Finite Element Model. To verify the Finite Element Model, several test cases were set up and solved using Nastran solver. Our simple load cases were found to be in congruence with analytical solution methods validating the finite element model.

Analysis Of F-104c World's Altitude Record Flight, William J. Day

Aerospace Engineering

No abstract provided.

Alterations Of The Cal Poly Supersonic Wind Tunnel To Increase Accuracy And Prove The Absence Of Shockwaves, Garrett A. Lovell, Hector A. Gonzalez

Aerospace Engineering

The calibration and improvement of the Cal Poly supersonic wind tunnel was performed in order to create a fully functional facility for supersonic testing. While investigating possible shocks present in the wind tunnel, it was discovered that the real concern was not the tunnel but the measurement systems. Both measurement systems, pitot tube and Schlieren, were evaluated and were found to be deficient. The pitot system had so much play in it that it bent backward every time the tunnel was run invalidating the results, and giving false shock data. The Schlieren system was missing one vital component to make …

Cal Poly Flight Test Platform For Instrument Development, Kyle Schaller, Ian Muceus, Aaron Ells

Aerospace Engineering

This report summarizes a six month effort to conceptually design, develop, and build an unmanned aerial vehicle to test a boundary layer data system (BLDS) developed by Dr. Russell Westphal and his team of mechanical engineering senior design students. The project is funded by Edwards Air Force Base and the United States Air Force Research Laboratory. During the first Cal Poly quarter of project work, January 4, 2010 to March 18, 2010, the team completed a conceptual and preliminary design. During the second quarter, March 18, 2010 to June 12, 2010, the team completed the construction and initial flight test …

Ground Support Equipment For Northrop Grumman Massive Heat Transfer Experiment, Michael A. Manuel, Christopher J. Sparber, Greg A. Trent

Aerospace Engineering

California Polytechnic State University students designed, built, and certified ground support equipment for the Northrop Grumman Massive Heat Transfer Experiment. The Cal Poly design team built the 10000, 20000, and 30000 assemblies to meet Northrop Grumman requirements. The requirements included interface limitations, design load factors, delivery, and testing specifications. The design process consists of requirements generation, conceptual design, preliminary design, design reviews, manufacturing, and certification. The hardware was successfully completed and is used at the Johnson Space and Kennedy Space Center.

Non-Explosive Actuator Simulator, Bryan Costanza

Aerospace Engineering

The CubeSat group at California Polytechnic State University, San Luis Obispo discovered the need for a new piece of ground test equipment. Previous testing of the non-explosive actuator has been very expensive and is not repeatable; two undesirable traits. The analysis of the fuse as well as the design and test of the simulator concept and final article is discussed. The simulator has already seen real use and its entire build and operation cost is much less than the cost of one test of the actual hardware. Performance of the simulator based on burn time and reset time is acceptable …

Cubesat Developers' Workshop 2010, Tracy Owens, Ryan Race

Communication Studies

This project is the narrative component of the 7th Annual CubeSat Developers' Workshop 2010 planning process. It reviews the steps and team dynamics over the seven months spent coordinating the conference for the Aerospace Department. It was the first time that students from the Communcation Studies Department were brought in to help with the event, and the gap between the College of Liberal Arts and the College of Engineering was bridged.

Aircraft Data Collection System, Amy Kronsteiner, Danny Marx, Collin Heller, Nathaniel Garcia, Nicholas Riccobono, Scott Parks, Albert Liu

Biomedical Engineering

This report outlines the design and building process for an interchangeable testing device that collects aircraft performance data. Included is the project objectives, system requirements, management plan, design concept development, design details, manufacturing procedures, and project verification test plans. The device is a wing-mounted Pitot-static system integrated with an Electronic Flight Instrument System (EFIS).

Smore Phase 2: An Upgrade In Valve Systems & Startup Procedure For A Small Methanol Oxygen Liquid Rocket Engine, Christian Soria

Aerospace Engineering

A Methanol-Oxygen liquid rocket engine was designed and manufactured under the California Polytechnic State University Aerospace Department by students in a graduate level rocket propulsion class. The SMORE, previously known as the KORE, is now in an ongoing testing and developing stage with plans to incorporate it into the aerospace undergraduate propulsion lab. Phase 2 of the liquid rocket engine development is to produce a start-up procedure that will improve the safety due to manual operation and poor ignition conditions. A propane ignition system along with the implementation of electrically operated solenoid valves to control the fuels and oxidizer were …

Autonomous Satellite Operations For Cubesat Satellites, Jason Lionel Anderson

Master's Theses

In the world of educational satellites, student teams manually conduct operations daily, sending commands and collecting downlinked data. Educational satellites typically travel in a Low Earth Orbit allowing line of sight communication for approximately thirty minutes each day. This is manageable for student teams as the required manpower is minimal. The international Global Educational Network for Satellite Operations (GENSO), however, promises satellite contact upwards of sixteen hours per day by connecting earth stations all over the world through the Internet. This dramatic increase in satellite communication time is unreasonable for student teams to conduct manual operations and alternatives must be …

Multidisciplinary Design Optimization Of An Extreme Aspect Ratio Hale Uav, Bryan J. Morrisey

Master's Theses

ABSTRACT

Multidisciplinary Design Optimization of an Extreme Aspect Ratio HALE UAV

Bryan J. Morrisey

Development of High Altitude Long Endurance (HALE) aircraft systems is part of a vision for a low cost communications/surveillance capability. Applications of a multi payload aircraft operating for extended periods at stratospheric altitudes span military and civil genres and support battlefield operations, communications, atmospheric or agricultural monitoring, surveillance, and other disciplines that may currently require satellite-based infrastructure. Presently, several development efforts are underway in this field, including a project sponsored by DARPA that aims at producing an aircraft that can sustain flight for multiple years and …

An Experiment On Integrated Thermal Management Using Metallic Foam, Derek M. Geiger

Master's Theses

This report details an approach to using metal foam heat exchangers inside an integrated thermal management system on a variable cycle engine. The propulsion system of interest is a variable cycle engine with an auxiliary, variable flow rate fan. The feasibility of utilizing an open-celled metallic foam heat exchanger in the ducting between the constant and variable-fans on this variable cycle engine to cool the avionics was explored using an experimental approach. Two heat exchangers, 6.3 inch width by 6.3 inch length by 0.5 inch thickness, were constructed from 20 and 40 pores per inch (PPI) metal foam and tested. …

A Flight Simulation Study Of The Simultaneous Non-Interfering Aircraft Approach, Brian H. Reel

Master's Theses

Using a new implementation of a NASA flight simulation of the Quiet Short-Haul Research Aircraft, autopilots were designed to be capable of flying both straight in (ILS) approaches, and circling (SNI) approaches. A standard glideslope coupler was sufficient for most conditions, but a standard Proportional-Integral-Derivative (PID) based localizer tracker was not sufficient for maintaining a lateral track on the SNI course. To track the SNI course, a feed-forward system, using GPS steering provided much better results.

NASA and the FAA embrace the concept of a Simultaneous, Non-Interfering (SNI) approach as a way to increase airport throughput while reducing the noise …

Cfd As Applied To The Design Of Short Takeoff And Landing Vehicles Using Circulation Control, Tyler M. Ball

Master's Theses

The ability to predict the distance required for an aircraft to takeoff is an essential component of aircraft design. It involves aspects related to each of the major aircraft systems: aerodynamics, propulsion, configuration, structures, and stability and control. For an aircraft designed for short takeoffs and landings (STOL), designing the aircraft to provide a short takeoff distance, or more precisely the balanced field length (BFL), often leads to the use of a powered lift technique such as circulation control (CC). Although CC has been around for many years, it has never been used on a production aircraft. This is in …