Other Aerospace Engineering Commons^™

Micrometeoroid Fluence Variation In Critical Orbits Due To Asteroid Disruption, Eliot Dan Aretskin-Hariton

Master's Theses

Micrometeoroids and orbital debris (MMOD) is a growing issue with international importance. Micrometeoroids are naturally occurring fragments of rock and dusk that exist throughout the solar system. Orbital debris is human made material like rocket bodies, paint flakes, and the effluent of spacecraft collisions. Even small MMOD particles on the order of 1 cm in diameter have the potential to destroy critical spacecraft systems. Because of this, MMOD is a threat to all spacecraft in orbit. Even governments that most sternly oppose US international policy have a stake when it comes to minimizing MMOD flux. Space-based assets are essential to …

Design, Fabrication, And Testing Of An Emr Based Orbital Debris Impact Testing Platform, Jeffrey J. Maniglia Jr.

Master's Theses

This paper describes the changes made from Cal Poly’s initial railgun system, the Mk. 1 railgun, to the Mk. 1.1 system, as well as the design, fabrication, and testing of a newer and larger Mk. 2 railgun system. The Mk. 1.1 system is developed as a more efficient alteration of the original Mk. 1 system, but is found to be defective due to hardware deficiencies and failure, as well as unforeseen efficiency losses. A Mk. 2 system is developed and built around donated hardware from the Naval Postgraduate School. The Mk. 2 system strove to implement an efficient, augmented, electromagnetic …

Improvement Of Electromagnetic Railgun Barrel Performance And Lifetime By Method Of Interfaces And Augmented Projectiles, Aleksey D. Pavlov

Master's Theses

Several methods of increasing railgun barrel performance and lifetime are investigated. These include two different barrel-projectile interface coatings: a solid graphite coating and a liquid eutectic indium-gallium alloy coating. These coatings are characterized and their usability in a railgun application is evaluated. A new type of projectile, in which the electrical conductivity varies as a function of position in order to condition current flow, is proposed and simulated with FEA software. The graphite coating was found to measurably reduce the forces of friction inside the bore but was so thin that it did not improve contact. The added contact resistance …

Ad-Hoc Regional Coverage Constellations Of Cubesats Using Secondary Launches, Guy G. Zohar

Master's Theses

As development of CubeSat based architectures increase, methods of deploying constellations of CubeSats are required to increase functionality of future systems. Given their low cost and quickly increasing launch opportunities, large numbers of CubeSats can easily be developed and deployed in orbit. However, as secondary payloads, CubeSats are severely limited in their options for deployment into appropriate constellation geometries.

This thesis examines the current methods for deploying cubes and proposes new and efficient geometries using secondary launch opportunities. Due to the current deployment hardware architecture, only the use of different launch opportunities, deployment direction, and deployment timing for individual cubes …

Solar Energy Collection Analysis Tool For Conceptual Aircraft Design, Grant Glazebrook

Aerospace Engineering

As battery energy storage and solar cell technology improve, solar aircraft are increasingly being considered for High Altitude Long Endurance missions. Although solar vehicles may theoretically remain on-station indefinitely using the sun as a power source, their design and feasibility is sensitive to mission planning details as specific as the time history of the vehicle’s deck orientation relative to the sun; the energy available for capture by the on-board solar array is governed by the solar incidence angle, and at certain orientations, the vehicle may cast shadows on itself and further reduce its energy capture capabilities. To quantify these losses, …

Control System Development For Small Uav Gimbal, Nicholas J. Brake

Master's Theses

The design process of unmanned ISR systems has typically driven in the direction of increasing system mass to increase stabilization performance and imagery quality. However, through the use of new sensor and processor technology high performance stabilization feedback is being made available for control on new small and low mass stabilized platforms that can be placed on small UAVs. This project develops and implements a LOS stabilization controller design, typically seen on larger gimbals, onto a new small stabilized gimbal, the Tigereye, and demonstrates the application on several small UAV aircraft. The Tigereye gimbal is a new 2lb, 2-axis, gimbal …

High-Fidelity Low-Thrust Trajectory Determination Research And Analysis, Tyler Hill

Aerospace Engineering

This document discusses a numerical analysis method for low thrust trajectory propagation known as the proximity quotient or Q-Law. The process uses a Lyapunov feedback control law developed by Petropoulos^[1] to propagate trajectories of spacecraft by minimizing the user defined function at the target orbit. A simplified propagator is created from the core mechanics of this method in MATLAB and tested in several user defined cases to demonstrate its capabilities. Several anomalies arose in test cases where variations in eccentricity, inclination, right ascension of the ascending node, and argument of perigee were specified. Solutions to these anomalies are discussed …

Global Launch Vehicle Selector, Keisuke Suzuki

Aerospace Engineering

No abstract provided.

Development Of A Pyrotechnic Shock Simulation Apparatus For Spacecraft Applications, Joseph Binder, Matthew Mccarty, Chris Rasmussen

Aerospace Engineering

This report details the research, design, construction, and testing of a pyrotechnic shock simulation apparatus for spacecraft applications. The apparatus was developed to be used in the Space Environments Lab at California Polytechnic State University. It will be used for testing spacecraft components with dimensions up to 24”x12”x12” as well as CubeSats. Additionally, it may be used as an instructional or demonstrational tool in the Aerospace Department’s space environments course. The apparatus functions by way of mechanical impact of an approximately 20 lb stainless steel swinging hammer. Tests were performed to verify the simulator’s functionality. Suggestions for improvement and further …

Thermal Vacuum Integration For Cal Poly's Space Environments Laboratory, Chelsea Barackman, Steven Jackowski

Aerospace Engineering

The purpose of the senior project is to construct a thermal vacuum by utilizing a preexisting vacuum chamber in the Space Environments Lab, and a donated Advanced Thermal Sciences (ATS) chiller. While a thermal vacuum is already available on campus, building one for the Space Environments Lab would grant undergraduates access to the equipment, allowing a much better understanding of testing methods and procedures in use by the aerospace industry. This paper explains the design and analysis of the thermal vacuum (T-VAC) project as well as the operation and procedures required for the ATS chiller and fill/drain tank. The thermal …

De-Orbiting Upper Stage Rocket Bodies Using A Deployable High Altitude Drag Sail, Robert A. Hawkins Jr., Joseph A. Palomares

Aerospace Engineering

This report examines the effectiveness of a drag sail to de-orbit upper stage rocket bodies. Many other perturbations contribute to the de-orbiting of these rocket bodies, and these perturbations will also be discussed briefly. This paper will show the length of time needed to force the altitudes of various launch vehicle stages with varying drag area sizes to less than 100 km. The upper stage of the Delta IV launch vehicle in an orbit with an altitude of 500 km will naturally de-orbit in 720 days but when equipped with a 20 m² drag sail, it will de-orbit in …

Degradation Of Solar Cells Due To Arcing In A Vacuum Chamber, Christina Gonzalez

Aerospace Engineering

This report summarizes the senior project entitled Degradation of Solar Cells Due to Arcing in a Vacuum Chamber. The goal of this experiment was to show electrical and physical degradation of silicon solar cells in a vacuum chamber. The cells were characterized and then placed in a vacuum chamber. Under vacuum, a potential was created to induce arcing to the cell. The cell was characterized again after arcing to determine the change in efficiency. This document details the process for designing the circuit to create the arcing, and the different setups used to degrade the cells electrically and physically. It …

Flaperon Assembly Manual For Pegastol Aftermarket Wings, Eric Alan Gray

Aerospace Engineering

No abstract provided.

Assembly Of A Passive Slat System For A Ch-701 Kit Aircraft, Jordan Coenen, Spencer Spagnola

Aerospace Engineering

No abstract provided.

Data Acquisition For Flight Tests Using Handheld Gps And Electronic Flight Instrument System, Christopher Michael Gocha

Aerospace Engineering

No abstract provided.

Registering An Amateur-Built Light Sport Kit Aircraft, Kevin Condron

Aerospace Engineering

No abstract provided.

Analysis And Testing Of Heat Transfer Through Honeycomb Panels, Daniel D. Nguyen

Aerospace Engineering

This project attempts to simulate accurately the thermal conductivity of honeycomb panels in the normal direction. Due to the large empty space of the honeycomb core, the thermal radiation mode of heat transfer was modeled along with conduction. Using Newton’s Method to solve for a steady state model of heat moving through the honeycomb panel, the theoretical effective thermal conduction of the honeycomb panel was found, ranging from 1.03 to 1.07 Q/m/K for a heat input of 2.5 W to 11.8 W. An experimental model was designed to test the theoretical results, using a cold plate and a heat plate …

Investigating Various Propulsion Systems For An External Attachment For A Controlled-Manual De-Orbit Of The Hubble Space Telescope, Nelson De Guia

Aerospace Engineering

This reports explains the results for a proposed senior project. This project concerns the Hubble Space Telescope, and exploring the possibility of having an external propulsion attachment for a manual de-orbit. The Hubble Space Telescope was proposed to return to Earth via the Space Shuttle. Although, through the current U.S. Space Administration, the Space Shuttle has been retired before the Hubble Space Telescope was retrieved. By completing this project, the results could provide insight to what type of propulsion would best de-orbit the Hubble upon its retirement. Different propulsion systems were considered to attempt to determine an optimal attachment, varying …

The Importance And Challenge Of Launch Environment Testing, Christina Diaz

Aerospace Engineering

This report discusses the purpose and effect of environmental testing, particularly vibration, shock and acoustic tests, in the aerospace industry. Vibration, shock, and acoustic testing are methods that are used to quantify and analyze the physical phenomenon of the launch environment on a payload or launch vehicle. The importance of innovation in testing and understanding of failures is crucial to a successful spacecraft mission. The advancement and precision of these testing methods is also explored in this report such as the invention of the 6 Degree of Freedom (DoF) vibration table and solutions to data acquisition issues recently discovered in …

Cubesat Constellation Analysis For Data Relaying, Bradley Ryan Smalarz

Master's Theses

Current CubeSat communication technology limits the amount of time, and number of accesses with ground stations. It has been proposed to use a constellation of CubeSats to improve relay performance and increase the number of accesses between a CubeSat and ground stations. By using the spatial and temporal analysis features of STK, coupled with the STK/Matlab interface a robust tool was created to analyze the performance of CubeSat constellations based on a store-and-forward communications model which is not currently supported by the STK Engine. Utilizing the Connect messaging format through a socket connection on the local machine, a Matlab graphical …

Comparison Of A High Purity Germanium Gamma Ray Spectrometer And A Multidimensional Nai(T1) Scintillation Gamma Ray Spectrometer, Greg Stratton

Aerospace Engineering

This report compares two different gamma ray spectrometers in terms of performance, operation, and apparatus and also investigates the design and integration challenges of using gamma ray spectrometers in space. The first spectrometer is a one-dimensional high purity germanium (HPGe) spectrometer and the second is a multidimensional NaI(Tl) scintillation spectrometer (MGRS). The key results show that the HPGe exhibits 15 to 27 times better energy resolution than the MGRS, but the MGRS is 52 times more sensitive and removes 177 % more of the background radiation.

The Effects Of Damage Arrestment Devices In Composite Plate Sandwiches With Fastener Holes, Mark Anderson, Nancy Hung Choy, Lacey Jones, Rita Kourskaya

Aerospace Engineering

Composite materials such as a carbon fiber are used in a variety of new technologies including aircraft, spacecraft, and motor vehicles. Carbon fiber has a high strength to weight ratio, a key advantage over other material options. This report discusses the use of composite damage arrestment devices (DADs) in composite sandwich panels with a foam core. There are three different curing cycles tested for the DADs: pressure only, vacuum only, and vacuum with 1000 lbs of pressure. Using a Tetrahedron Heat Press to cure the composite specimen and an Instron Machine to perform tensile testing, data was collected for each …

Design, Manufacturing And Testing Of An Environmentally-Green Bipropellant Thruster, Alex Bendoyro, Gabriel Sanchez, Erin Stearns, Phillip Takahashi

Aerospace Engineering

This project reviews the design, manufacturing and experimentation process of a green bi-propellant thruster designed to output 5 lbf. The goals were to successfully design, manufacture and test a thruster, while discovering the complications that arise through out the complete design process of a green thruster. The thruster was successfully designed using ideal rocket equations and the design was successfully confirmed using CFD and FEA. Manufacturing of the thruster was fully planned and revealed mild flaws in thruster design. For example some features were not manufacturable to the exact measurements desired. Testing of the engine gave results inconsistent with expected …

Design, Fabrication, And Testing Of An Electromagnetic Rail Gun For The Repeated Testing And Simulation Of Orbital Debris Impacts, Jeff Maniglia, Jordan Smiroldo, Alex Westfall, Guy Zohar

Aerospace Engineering

An Electromagnetic Railgun (EMRG) was designed, built, and tested, capable of firing a projectile a 1 gram projectile at 650 m/s muzzle velocity. The EMRG utilizes an injector, a high voltage power supply, a capacitor bank, inductors and rails. The injector fires 2300 psig Nitrogen gas into the system to provide an initial velocity. The high voltage power supply charges the capacitor bank. The capacitor bank discharges the electric potential built up through the projectile while inside the rails in order to create the EMRG’s force. The inductors are used to pulse form the capacitor bank in order to get …

Electric Aircraft Propulsion Test Rig Design & Fabrication, Ryan Mayer, Brian Kubicki, Bradley Rodriguez, Austin Harris, David Caudle

Aerospace Engineering

An electric aircraft propulsion test rig was designed and fabricated to predict thrust, torque and battery discharge profiles for an electric aircraft. The original unit was purchased from ElectraFlyer and included the DC brushless motor, carbon fiber propeller, charger, electronic controller and lithium polymer batteries. Various components were constructed and purchased in order to fabricate the optimal test rig apparatus. This apparatus allows for simultaneous measurement of the torque and thrust of the system through the use of a biaxial sensor. The test rig also measures system voltage and current, which allows the user to determine the discharge profile of …

An Investigation Of Dynamic Soaring And Its Applications To The Albatross And Rc Sailplanes, Christopher J. Lee

Aerospace Engineering

Dynamic soaring is a technique used by the sea bird the Albatross. This technique allows for the bird to stay in the air for extended periods of time with very little effort. Dynamic soaring utilizes the wind gradient on the surface of the ocean to maintain its airspeed. A similar technique is used by RC glider pilots to achieve high speeds by using the shear wind layer on the leeward side of mountain ridges.

Cal Poly Human Powered Helicopter, Josiah Auer, Eric Behne, Dave Berry, Rebecca Hennings, James Koch, Ian Marquardt, Josiah Mayfield, Sean Miller

Mechanical Engineering

The following report encompasses the Cal Poly Human Powered Helicopter team’s efforts during the 2010-2011 academic year. The intention of this project is to further the knowledge of human powered helicopter design and to validate an ideal configuration through experimental tests and analysis. 

A. Background

The Sikorsky Prize offered by the American Helicopter Society has been the catalyst for many attempts at Human Powered Helicopter (HPH) flight. The requirement to win the prize is a continuous, human powered flight of more than 60 seconds that stays within a 10 meter square box and reaches an altitude greater than 3 meters …

Hybrid Rocket Based Combined Cycle Test Rig Design, Construction, And Testing, Mark Costa, Matthew Handfelt

Aerospace Engineering

No abstract provided.

Designing The Human-Powered Helicopter: A New Perspective, Gregory Hamilton Gradwell

Master's Theses

The concept of human-powered vertical flight was studied in great depth. Through the manipulation of preexisting theory and analytical methods, a collection of design tools was created to expediently conceptualize and then analyze virtually any rotor. The tools were then arranged as part of a complete helicopter rotor design process. The lessons learned as a result of studying this process—and the tools of which it consists—are presented in the following discussion. It is the belief of the author that by utilizing these tools, as well as the suggestions that accompany them, future engineers may someday build a human-powered helicopter capable …

Development Of A Laboratory Experiment To Simulate Upper-Stage Rocket Explosions, Timothy J. Price

Aerospace Engineering

This report is a summary of the senior project entitled Development of a Laboratory Experiment to Simulate Upper-Stage Rocket Explosions. The goal of the experiment was to recreate a NASA experiment which used aluminum soft drink cans to approximate the shape of an Ariane third stage rocket. The cans were placed in a vacuum chamber and fired upon with a projectile from a light gas gun. The resulting debris was collected and analyzed allowing several conclusions to be made regarding the behavior or rocket breakups and the formation of space debris. In lieu of a light gas gun, energy drink …