Navigation, Guidance, Control and Dynamics Commons^™

Optimal Sizing And Control Of Hybrid Rocket Vehicles, Srija Ryakam

Doctoral Dissertations and Master's Theses

In the present work, a genetic algorithm is used to optimize a hybrid rocket engine in order to minimize the propellant required for a specific mission. In a hybrid rocket engine, the mass flow rate of the oxidizer can be throttled to enhance the performance of the rocket. First, an analysis of the internal ballistics and the ascent trajectory has been carried out for different mass flow rates of the oxidizer as a function of time, for a fixed amount of oxidizer, in order to study the effect of throttling. Two equivalent problems are considered: in the first problem the …

Rf Fingerprinting Unmanned Aerial Vehicles, Norah Ondus

Doctoral Dissertations and Master's Theses

As unmanned aerial vehicles (UAVs) continue to become more readily available, their use in civil, military, and commercial applications is growing significantly. From aerial surveillance to search-and-rescue to package delivery the use cases of UAVs are accelerating. This accelerating popularity gives rise to numerous attack possibilities for example impersonation attacks in drone-based delivery, in a UAV swarm, etc. In order to ensure drone security, in this project we propose an authentication system based on RF fingerprinting. Specifically, we extract and use the device-specific hardware impairments embedded in the transmitted RF signal to separate the identity of each UAV. To achieve …

Envelope Analysis Of Speed-Controlled Evtol Urban Air Mobility Vehicles, David J. Thompson

Doctoral Dissertations and Master's Theses

There are many vehicles being developed which rely on electrically driven propellers/rotors for both control and propulsion. Based on these vehicles, it is hypothesized that there exists a size limit for speed-controlled propellers/rotors in terms of propeller/rotor diameter. To investigate this, a scaling method was created to allow for a vehicle to be created without being based on a specific mission or passenger/cargo requirement. Relationships were developed to size both the physical vehicle and the weight of the vehicle based on the propeller/rotor diameter. A simulation of a quadcopter was created for the vehicle and scaled with both propeller/rotor diameter …

Design And Flight-Path Simulation Of A Dynamic-Soaring Uav, Gladston Joseph

Doctoral Dissertations and Master's Theses

We address the development of a dynamic-soaring capable unmanned aerial vehicle (UAV) optimized for long-duration flight with no on-board power consumption. The UAV’s aerodynamic properties are captured with the integration of variable fidelity aerodynamic analyses. In addition to this, a 6 degree-of-freedom flight simulation environment is designed to include the effects of atmospheric wind conditions. A simple flight control system aids in the development of the dynamic soaring maneuver. A modular design paradigm is adopted for the aircraft dynamics model, which makes it conducive to use the same environment to simulate other aircraft models. Multiple wind-shear models are synthesized to …

Modeling Of A Hybrid-Electric System And Design Of Control Laws For Hybrid-Electric Urban Air Mobility Power Plants, Sohail Bin Salam Lahaji

Doctoral Dissertations and Master's Theses

Advanced Air Mobility (AAM) is an emerging market and technology in the aerospace industry. These systems are being developed to overcome traffic congestion. The current designs make use of Distributed Electric Propulsion (DEP): either fully electric or hybrid electric. The hybrid engine system consists of two power sources: prime movers, such as turbine engines, and batteries. The hybrid systems offer higher range and endurance compared with the existing fully electric systems. Hybrid-electric power generation systems for AAM have different mission requirements when compared to systems used in automobiles. Therefore, there is a particular need to model hybrid-electric systems and the …

Adaptive And Neural Network-Based Aircraft Tracking Control With Synthetic Jet Actuators, Joshua Teramae

Doctoral Dissertations and Master's Theses

Wing-embedded synthetic jet actuators (SJA) can be used to achieve maneuvering control in aircraft by delivering controllable airflow perturbations near the wing surface. Trajectory tracking control design for aircraft equipped with SJA is particularly challenging, since the controlling actuator itself has an uncertain dynamic model. These challenges necessitate advanced nonlinear control design methods to achieve desirable performance for SJA-based aircraft (e.g., micro air vehicles (MAVs)). In this research, adaptive and neural-network based control methods are investigated, which are specifically designed to compensate for the SJA dynamic model uncertainty and unpredictable operating conditions characters tic of real-world MAV applications. The control …

Adaptive Augmentation Of Non-Minimum Phase Flexible Aerospace Systems, Michael A. Dupuis

Doctoral Dissertations and Master's Theses

This work demonstrates the efficacy of direct adaptive augmentation on a robotic flexible system as an analogue of a large flexible aerospace structure such as a launch vehicle or aircraft. To that end, a robot was constructed as a control system testbed. This robot, named “Penny,” contains the command and data acquisition capabilities necessary to influence and record system state data, including the flex states of its flexible structures. This robot was tested in two configurations, one with a vertically cantilevered flexible beam, and one with a flexible inverted pendulum (a flexible cart-pole system). The physical system was then characterized …

Geomagnetic Aided Dead-Reckoning Navigation, Andrei Cuenca

Doctoral Dissertations and Master's Theses

The dependence of modern navigation methods on global positioning systems has led to developing alternative algorithms for localization, capable of providing reliable and robust estimations. Global position system is commonly used in a vast majority of the world’s devices, and it can supply real time position and velocity information. However, its accuracy can be compromised by external operational effects such as signal availability, cyber-attacks or weather conditions. This thesis investigates an alternative approach to enhance navigation in GPS-denied environments. Particularly, it develops an integrated navigation architecture based on geomagnetic referencing models capable of dead reckoning at GPS denied intervals. A …

Uas Model Identification And Simulation To Support In-Flight Testing Of Discrete Adaptive Fault-Tolerant Control Laws, Mansi Subhash Bakori

Doctoral Dissertations and Master's Theses

In mission-critical applications of unmanned and autonomous aerial systems(UAS), it is of significant importance to develop robust strategies for fault-tolerant systems that can countermeasure system degradation and consequently support the integration into the National Airspace (NAS). This thesis research illustrates the results of systems identification that is performed using DATCOM followed by the flight test data. This data is acquired from conducting an intensive flight testings program of a fixed-wing UAS to determine the state-space model of the aircraft. A discrete state-space system is reconstructed from these models to derive Auto-Regressive Moving-Average (ARMA) models used to design a Discrete Direct …

Three-Dimensional, Vision-Based Proportional Navigation For Uav Collision Avoidance, Guanhong Gao

Doctoral Dissertations and Master's Theses

As the number of potential applications for Unmanned Aerial Vehicles (UAVs) keeps rising steadily, the chances that these devices will operate in close proximity to static or dynamic obstacles also increases. Therefore, collision avoidance is an important challenge to overcome for Unmanned Aerial Vehicle operations. Electro-optical devices have several advantages such as light weight, low cost, low algorithm requirements with respect to computational power and possibly night vision capabilities. Therefore, vision-based Unmanned Aerial Vehicle collision avoidance has received considerable attention. Although much progress has been made in collision avoidance systems (CAS), most approaches are focused on two-dimensional environments. In order …

An Open Source, Autonomous, Vision-Based Algorithm For Hazard Detection And Avoidance For Celestial Body Landing, Daniel Posada

Doctoral Dissertations and Master's Theses

Planetary exploration is one of the main goals that humankind has established as a must for space exploration in order to be prepared for colonizing new places and provide scientific data for a better understanding of the formation of our solar system. In order to provide a safe approach, several safety measures must be undertaken to guarantee not only the success of the mission but also the safety of the crew. One of these safety measures is the Autonomous Hazard, Detection, and Avoidance (HDA) sub-system for celestial body landers that will enable different spacecraft to complete solar system exploration. The …

Autonomous Autorotation Of A Tilt-Rotor Aircraft Using Model Predictive Control, Elias Wilson

Doctoral Dissertations and Master's Theses

Tilt rotor vehicles are governed by FAA laws also used for conventional helicopters, which require autorotational maneuvering and landing given a total power failure. With low inertia rotors and high disk loading of tilt rotor vehicles, this already difficult task becomes significantly more challenging. In this work, a model predictive controller is developed to autonomously maneuver and land a tilt rotor given complete power loss. A high fidelity model of a tilt rotor vehicle is created and used to simulate the vehicle dynamics and response to control inputs. A reduced order dynamic model is used within a model predictive control …

Risk Mitigation For Low Latitude Ground-Based Augmentation System (Gbas) Precision Approach Operations, Richard Walter Cole

Doctoral Dissertations and Master's Theses

The ground-based augmentation system (GBAS) is a safety-critical system consisting of the hardware and software that augments the Global Positioning System (GPS) to provide precision approach and landing capability and is one of the navigational cornerstones of the International Civil Aviation Organization's (ICAO) global transition to space-based technologies. In low latitude regions, where the space-based augmentation system (SBAS) cannot provide adequate precision approach service due to large system errors induced by ionospheric delays, GBAS is the best option to provide the primary navigation function for the modernized global air traffic system. The purpose of the study was to identify patterns …

Spacecraft Trajectory Planning For Optimal Observability Using Angles-Only Navigation, Francisco José Franquiz

Doctoral Dissertations and Master's Theses

This work leverages existing techniques in angles-only navigation to develop optimal range observability maneuvers and trajectory planning methods for spacecraft under constrained relative motion. The resulting contribution is a guidance method for impulsive rendezvous and proximity operations valid for elliptic orbits of arbitrary eccentricity.

The system dynamics describe the relative motion of an arbitrary number of maneuvering (chaser) spacecraft about a single non-cooperative resident-space-object (RSO). The chaser spacecraft motion is constrained in terms of the 1) collision bounds of the RSO, 2) maximum fuel usage, 3) eclipse avoidance, and 4) optical sensor field of view restrictions. When more than one …

Adaptive Commanding Of Control Moment Gyroscopes With Backlash, Justin G. Bourke

Doctoral Dissertations and Master's Theses

The existence of backlash in mechanical systems provides significant challenges when attempting to control these systems to a high degree of precision. The imperfect meshing of gear or belt teeth deteriorates the performance of position controllers and tracking of small commands, producing unacceptable steady-state offsets, increased rise and settling times. Agile spacecraft often use control moment gyroscopes (CMGs) equipped with gear trains to efficiently provide torque for the fine attitude adjustments used in docking and precision stabilization maneuvers. A theoretical examination and a practical model is developed to study the effectiveness of both proportional-integral (PI) and model referencing adaptive controllers …

Uncover The Power Of Multipath : Detecting Nlos Drones Using Low-Cost Wifi Devices, Ashok Vardhan Raja

Doctoral Dissertations and Master's Theses

In recent years, consumer UAV technology has seen considerable advances. Consumer UAVs have become an ideal vector for privacy invasions due to their affordability, size, maneuverability, and their ability to stream live high-quality video. There is considerable proliferation of drones in both civil and military domains. Hence it is critical to detect invading unmanned aerial vehicles (UAVs) or drones in a timely manner for both security and safeguarding privacy. Currently available solutions like active radar, video or acoustic sensors are very expensive (especially for individuals) and have considerable constraints (e.g., requiring visual line of sight).

Recent research on drone detection …

Direct Adaptive Control For A Trajectory Tracking Uav, Nirmit Prabhakar

Doctoral Dissertations and Master's Theses

This research focuses on the theoretical development and analysis of a direct adaptive control algorithm to enable a fixed-wing UAV to track reference trajectories while in the presence of persistent external disturbances. A typical application of this work is autonomous flight through urban environments, where reference trajectories would be provided by a path planning algorithm and the vehicle would be subjected to significant wind gust disturbances. Full 6-DOF nonlinear and linear UAV simulation models are developed and used to study the performance of the direct adaptive control system for various scenarios. A stability proof is developed to prove convergence of …

Vision-Aided Navigation Using Tracked Landmarks, Nicodemus Myhre

Doctoral Dissertations and Master's Theses

This thesis presents vision-based state estimation algorithms for autonomous vehicles to navigate within GPS-denied environments. To accomplish this objective, an approach is developed that utilizes a priori information about the environment. In particular, the algorithm leverages recognizable ‘landmarks’ in the environment, the positions of which are known in advance, to stabilize the state estimate. Measurements of the position of one or more landmarks in the image plane of a monocular camera are then filtered using an extended Kalman filter (EKF) with data from a traditional inertial measurement unit (IMU) consisting of accelerometers and rate gyros to produce the state estimate. …

An Underwater Vehicle Navigation System Using Acoustic And Inertial Sensors, Khalid M. Alzahrani

Doctoral Dissertations and Master's Theses

Unmanned Underwater Vehicles (UUVs) have become an essential tool for different underwater tasks. Compared with other unmanned systems, the navigation and localization for UUVs are particularly challenging due to the unavailability of Global Positioning System (GPS) signals underwater and the complexity of the unstable environment. Alternative methods such as acoustic positioning systems, Inertial Navigation Systems (INS), and the geophysical navigation approach are used for UUV navigation. Acoustic positioning systems utilize the characteristics of acoustic signals that have a lower absorption rate and a more extended propagation distance than electromagnetic signals underwater. The significant disadvantage of the INS is the “drift,” …

A Study On The Control, Dynamics, And Hardware Of Micro Aerial Biomimetic Flapping Wing Vehicles, Siara Hunt

Doctoral Dissertations and Master's Theses

Biological flight encapsulates 400 million years of evolutionary ingenuity and thus is the most efficient way to fly. If an engineering pursuit is not adhering to biomimetic inspiration, then it is probably not the most efficient design. An aircraft that is inspired by bird or other biological modes of flight is called an ornithopter and is the original design of the first airplanes. Flapping wings hold much engineering promise with the potential to produce lift and thrust simultaneously. In this research, modeling and simulation of a flapping wing vehicle is generated. The purpose of this research is to develop a …

Development Of A Remotely-Piloted Vehicle Platform To Support Implementation, Verification, And Validation Of Pilot Control Systems, Sean O’Toole

Doctoral Dissertations and Master's Theses

This thesis presents the development of a research test bed and the use of a set of metrics for evaluating handling qualities with pilot in the loop configuration. The main objective of this study is to provide software and hardware tools to support performance evaluation of control systems designed to compensate for Pilot Induced Oscillations (PIOs). A remotely-piloted vehicle presented in this thesis consists of an RC aircraft modified to be flown from a ground station cockpit. The unmanned aerial system has a high-speed on-board processing system capable of simulating different conditions during flight such as injecting actuator failures and …

Design, Development And Implementation Of Intelligent Algorithms To Increase Autonomy Of Quadrotor Unmanned Missions, Diego F. Garcia Herrera

Doctoral Dissertations and Master's Theses

This thesis presents the development and implementation of intelligent algorithms to increase autonomy of unmanned missions for quadrotor type UAVs. A six-degree-of freedom dynamic model of a quadrotor is developed in Matlab/Simulink in order to support the design of control algorithms previous to real-time implementation. A dynamic inversion based control architecture is developed to minimize nonlinearities and improve robustness when the system is driven outside bounds of nominal design. The design and the implementation of the control laws are described. An immunity-based architecture is introduced for monitoring quadrotor health and its capabilities for detecting abnormal conditions are successfully demonstrated through …

Collision Avoidance And Navigation Of Uas Using Vision-Based Proportional Navigation, Matthew J. Clark

Doctoral Dissertations and Master's Theses

Electro-optical devices have received considerable interest due to their light weight, low cost, and low algorithm requirements with respect to computational power. In this thesis, vision-based guidance laws are developed to provide sense and avoid capabilities for unmanned aerial vehicles (UAVs) operating in complex environments with multiple static and dynamic collision threats. These collision avoidance guidance laws are based on the principle of proportional navigation (Pro-Nav), which states that a UAV is on a collision course with another vehicle or object if the line-of-sight (LOS) angles to the object remain constant. The guidance laws are designed for use with monocular …

Vision-Aided Navigation For Autonomous Vehicles Using Tracked Feature Points, Ahmed Saber Soliman Sayem

Doctoral Dissertations and Master's Theses

This thesis discusses the evaluation, implementation, and testing of several navigation algorithms and feature extraction algorithms using an inertial measurement unit (IMU) and an image capture device (camera) mounted on a ground robot and a quadrotor UAV. The vision-aided navigation algorithms are implemented on data-collected from sensors on an unmanned ground vehicle and a quadrotor, and the results are validated by comparison with GPS data. The thesis investigates sensor fusion techniques for integrating measured IMU data with information extracted from image processing algorithms in order to provide accurate vehicle state estimation. This image-based information takes the forms of features, such …

Magneto-Rheological Fluid Device As Artificial Feel Force System On Aircraft Control Stick, Vignesh Manoharan

Doctoral Dissertations and Master's Theses

The conventional feel system in any aircraft occupies large space in the cockpit and has complicated designs. The primary objective of this research is to develop an artificial feel force system that can overcome some drawbacks of the current feel force system. A novel feel system using magneto-rheological (MR) fluid is constructed to precisely control the shear stress under the magnetic field. To validate the functionality of the MR artificial feel system, the final system is fabricated and multiple tests are performed to acquire force-velocity characteristics that are compared to the mathematical model derived. In addition, the reference model of …

Design Of Synthetic Jet Actuator For Flight Control Of Small Uav, Priyanka Pagadala

Doctoral Dissertations and Master's Theses

The main idea of this project is to develop a prototype SJA - Synthetic Jet Actuator to embed into a small UAV with modified Glauert wing cross-section for Active Flow Control. Apart from lift enhancement, drag reduction, or separation control, etc; LCO suppression might be possible by modifying the boundary layer through the use of these actuators. For initial investigation, a wing section with span of 12.4 cm and chord of 14 cm was fabricated and tests were conducted in the subsonic wind tunnel at the free stream velocities of 5 and 10 m / s. From these experiments, lift …

Attitude Determination & Control System Design And Implementation For A 6u Cubesat Proximity Operations Mission, Francisco J. Franquiz

Doctoral Dissertations and Master's Theses

The purpose of this work is to discuss the attitude determination and control system (ADCS) design process and implementation for a 12 kg, 6U (36.6 cm x 23.9 cm x 27.97 cm) CubeSat class nano-satellite. The design is based on the requirements and capabilities of the Application for Resident Space Object Proximity Analysis and IMAging (ARAPAIMA) proximity operations mission. The satellite is equipped with a cold gas propulsion system capable of exerting 2.5 mN m torques in both directions about each body axis. The attitude sensors include an angular rate gyro and star tracker (STR), supplemented by the payload optical …

Vision-Aided Navigation For Gps-Denied Environments Using Landmark Feature Identification, Tennyson Samuel John

Doctoral Dissertations and Master's Theses

In recent years, unmanned autonomous vehicles have been used in diverse applications because of their multifaceted capabilities. In most cases, the navigation systems for these vehicles are dependent on Global Positioning System (GPS) technology. Many applications of interest, however, entail operations in environments in which GPS is intermittent or completely denied. These applications include operations in complex urban or indoor environments as well as missions in adversarial environments where GPS might be denied using jamming technology.

This thesis investigate the development of vision-aided navigation algorithms that utilize processed images from a monocular camera as an alternative to GPS. The vision-aided …

Robust And Adaptive Nonlinear Control Of Limit Cycle Oscillations In Uavs Using Synthetic Jet Actuators, Natalie Ramos Pedroza

Doctoral Dissertations and Master's Theses

Limit cycle oscillations (LCO), also known as utter, cause significant challenges in fight control of unmanned aerial vehicles (UAVs), and could potentially lead to structural damage and catastrophic failures. LCO can be described as vibrational motions in the pitching and plunging displacements of an aircraft wing. Even in low Reynolds number (low-Re) fight regimes, LCO can exceed the limiting boundary for safe UAV fight. Further, as practical considerations motivate the design of smaller, lighter weight UAVs, there is a growing need for UAV systems that do not require heavy mechanical actuators (e.g., ailerons). To address this, the use of synthetic …

Robust Image-Based Visual Servo Control Of An Uncertain Missile Airframe, Murat Tunca Aygun

Doctoral Dissertations and Master's Theses

A nonlinear vision-based guidance law is presented for a missile-target scenario in the presence of model uncertainty and unknown target evasive maneuvers. To ease the readability of this thesis, detailed explanations of any relevant mathematical tools are provided, including stability definitions, the procedure of Lyapunov-based stability analysis, sliding mode control fundamentals, basics on visual servo control, and other basic nonlinear control tools. To develop the vision-based guidance law, projective geometric relationships are utilized to combine the image kinematics with the missile dynamics in an integrated visual dynamic system. The guidance law is designed using an image-based visual servo control method …