Aeronautical Vehicles Commons^™

Three-Dimensional, Vision-Based Proportional Navigation For Uav Collision Avoidance, Guanhong Gao

Doctoral Dissertations and Master's Theses

As the number of potential applications for Unmanned Aerial Vehicles (UAVs) keeps rising steadily, the chances that these devices will operate in close proximity to static or dynamic obstacles also increases. Therefore, collision avoidance is an important challenge to overcome for Unmanned Aerial Vehicle operations. Electro-optical devices have several advantages such as light weight, low cost, low algorithm requirements with respect to computational power and possibly night vision capabilities. Therefore, vision-based Unmanned Aerial Vehicle collision avoidance has received considerable attention. Although much progress has been made in collision avoidance systems (CAS), most approaches are focused on two-dimensional environments. In order …

Fuel Efficient Control Design And Constrained Motion Analysis For Spacecraft Coulomb Formation In Elliptic Chief Orbits, Muhammad Wasif Memon

Doctoral Dissertations and Master's Theses

The use of Coulomb force has been analyzed in recent years to provide propulsion in space for various applications. Coulomb formation can also be utilized to make close formation spacecraft missions fuel efficient. In this study, the Coulomb formation of two craft is studied in elliptic chief orbits for two formation geometries. The first formation requires both spacecraft to be aligned along the nadir (radial) direction and the second formation requires both spacecraft to maintain a constant separation distance relative to each other while each spacecraft rotates freely on the surface of a sphere with the ratio of the radii …

Adaptive Learning Terrain Estimation For Unmanned Aerial Vehicle Applications, Pedro L. Vergara Garcia

Doctoral Dissertations and Master's Theses

For the past decade, terrain mapping research has focused on ground robots using occupancy grids and tree-like data structures, like Octomap and Quadtrees. Since flight vehicles have different constraints, ground-based terrain mapping research may not be directly applicable to the aerospace industry. To address this issue, Adaptive Learning Terrain Estimation algorithms have been developed with an aim towards aerospace applications. This thesis develops and tests Adaptive Learning Terrain Estimation algorithms using a custom test benchmark on representative aerospace cases: autonomous UAV landing and UAV flight through 3D urban environments. The fundamental objective of this thesis is to investigate the use …

Risk Mitigation For Low Latitude Ground-Based Augmentation System (Gbas) Precision Approach Operations, Richard Walter Cole

Doctoral Dissertations and Master's Theses

The ground-based augmentation system (GBAS) is a safety-critical system consisting of the hardware and software that augments the Global Positioning System (GPS) to provide precision approach and landing capability and is one of the navigational cornerstones of the International Civil Aviation Organization's (ICAO) global transition to space-based technologies. In low latitude regions, where the space-based augmentation system (SBAS) cannot provide adequate precision approach service due to large system errors induced by ionospheric delays, GBAS is the best option to provide the primary navigation function for the modernized global air traffic system. The purpose of the study was to identify patterns …

Development Of Robust Control Laws For Disturbance Rejection In Rotorcraft Uavs, Johannes Verberne

Doctoral Dissertations and Master's Theses

Inherent stability inside the flight envelope must be guaranteed in order to safely introduce private and commercial UAV systems into the national airspace. The rejection of unknown external wind disturbances offers a challenging task due to the limited available information about the unpredictable and turbulent characteristics of the wind. This thesis focuses on the design, development and implementation of robust control algorithms for disturbance rejection in rotorcraft UAVs. The main focus is the rejection of external disturbances caused by wind influences. Four control algorithms are developed in an effort to mitigate wind effects: baseline nonlinear dynamic inversion (NLDI), a wind …

Uncover The Power Of Multipath : Detecting Nlos Drones Using Low-Cost Wifi Devices, Ashok Vardhan Raja

Doctoral Dissertations and Master's Theses

In recent years, consumer UAV technology has seen considerable advances. Consumer UAVs have become an ideal vector for privacy invasions due to their affordability, size, maneuverability, and their ability to stream live high-quality video. There is considerable proliferation of drones in both civil and military domains. Hence it is critical to detect invading unmanned aerial vehicles (UAVs) or drones in a timely manner for both security and safeguarding privacy. Currently available solutions like active radar, video or acoustic sensors are very expensive (especially for individuals) and have considerable constraints (e.g., requiring visual line of sight).

Recent research on drone detection …

Design And Implementation Of Intelligent Guidance Algorithms For Uav Mission Protection, Karina Rivera

Doctoral Dissertations and Master's Theses

In recent years, the interest of investigating intelligent systems for Unmanned Aerial Vehicles (UAVs) have increased in popularity due to their large range of capabilities such as on-line obstacle avoidance, autonomy, search and rescue, fast prototyping and integration in the National Air Space (NAS). Many research efforts currently focus on system robustness against uncertainties but do not consider the probability of readjusting tasks based on the remaining resources to successfully complete the mission. In this thesis, an intelligent algorithm approach is proposed along with decision-making capabilities to enhance UAVs post-failure performance. This intelligent algorithm integrates a set of path planning …

Development Of A Small Unmanned Aerial Vehicle Longitudinal Model For Future Flutter Testing, Said S. Hamada

Doctoral Dissertations and Master's Theses

This thesis presents the system identification of the longitudinal motion of a small unmanned aerial vehicle with flexible characteristics. The unmanned aerial vehicle of study is an off-the-shelf aircraft with limited knowledge about the dynamic model. The first task in obtaining a model for flutter testing is determining the rigid body model. Specifically, this thesis will focus in the development of the aircraft and obtaining the longitudinal rigid body model. This involves the assembly and configuration of the avionics and sensors, performing experiments to determine mass and inertia properties and using software tools for aerodynamic analysis to get preliminary values …

Homography-Based State Estimation For Autonomous Exploration In Unknown Environments, Andres S. Chavez Armijos

Doctoral Dissertations and Master's Theses

This thesis presents the development of vision-based state estimation algorithms to enable a quadcopter UAV to navigate and explore a previously unknown GPS denied environment. These state estimation algorithms are based on tracked Speeded-Up Robust Features (SURF) points and the homography relationship that relates the camera motion to the locations of tracked planar feature points in the image plane. An extended Kalman filter implementation is developed to perform sensor fusion using measurements from an onboard inertial measurement unit (accelerometers and rate gyros) with vision-based measurements derived from the homography relationship. Therefore, the measurement update in the filter requires the processing …

Robust Nonlinear Estimation And Control Applications Using Synthetic Jet Actuators, Natalie Ramos Pedroza

Doctoral Dissertations and Master's Theses

Limit cycle oscillations (LCO), also known as utter, cause significant challenges in flight control of small unmanned aerial vehicles (SUAVs), and could potentially lead to structural damage and catastrophic failures. LCO can be described as vibrational motions in the rocking, pitching and plunging displacements of an aircraft wing. To address this, the use of synthetic jet actuators (SJAs) in UAV flight control systems is becoming popular as a practical alternative and to mechanical deflection surfaces.

Synthetic jet actuators are promising tools for LCO suppression systems in small UAVs due to their small size, ease of operation, and low cost. Uncertainties …

Aerodynamic And Performance Analysis Of A Morphing Helicopter Rotor System, Vinay Gopal Krishnan

Doctoral Dissertations and Master's Theses

The purpose of this study was to investigate the effect of rotor morphing, specifically variable rotor speed and variable blade twist, on various parameters such as the distribution of angle of attack, lift, power, thrust and/or other metrics describing the performance of a helicopter rotor. A MATLAB based blade element theory model was developed and executed for different flight conditions. The model was validated against the flight test data of a UH-60. Effects on power, lift to drag ratio and rotor drag from variations in blade twist, rotor speed, rotor radius and blade chord was analyzed. Morphing cases were applied …

A Study On The Control, Dynamics, And Hardware Of Micro Aerial Biomimetic Flapping Wing Vehicles, Siara Hunt

Doctoral Dissertations and Master's Theses

Biological flight encapsulates 400 million years of evolutionary ingenuity and thus is the most efficient way to fly. If an engineering pursuit is not adhering to biomimetic inspiration, then it is probably not the most efficient design. An aircraft that is inspired by bird or other biological modes of flight is called an ornithopter and is the original design of the first airplanes. Flapping wings hold much engineering promise with the potential to produce lift and thrust simultaneously. In this research, modeling and simulation of a flapping wing vehicle is generated. The purpose of this research is to develop a …

Design, Development And Implementation Of Intelligent Algorithms To Increase Autonomy Of Quadrotor Unmanned Missions, Diego F. Garcia Herrera

Doctoral Dissertations and Master's Theses

This thesis presents the development and implementation of intelligent algorithms to increase autonomy of unmanned missions for quadrotor type UAVs. A six-degree-of freedom dynamic model of a quadrotor is developed in Matlab/Simulink in order to support the design of control algorithms previous to real-time implementation. A dynamic inversion based control architecture is developed to minimize nonlinearities and improve robustness when the system is driven outside bounds of nominal design. The design and the implementation of the control laws are described. An immunity-based architecture is introduced for monitoring quadrotor health and its capabilities for detecting abnormal conditions are successfully demonstrated through …

Performance Analysis Of A Coaxial Helicopter In Hover And Forward Flight, Stanrich D. Fernandes

Doctoral Dissertations and Master's Theses

The performance of a coaxial rotor system has been analyzed by establishing a proper basis of comparison between a conventional single rotor and coaxial rotor. An attempt has also been made to better understand the complicated aerodynamic interactions associated with coaxial rotor wakes by using a free-vortex methodology (FVM). The FVM is a Lagrangian-based wake convection methodology, which solves for the evolution of the vortical wake produced by the rotor blades under the influence of an external flow. The extent to which the two rotors interact with each other was found to be highly dependent on the inter-rotor spacing. To …

Battery Centric Serial Hybrid Aircraft Performance And Design Space, Lenny Gartenberg

Doctoral Dissertations and Master's Theses

The design space and flight envelope of a battery centric serial hybrid aircraft has been analytically derived. The formulation assumes cruising flight only and all energy available is used. The flight envelope can be generated for any conventional propeller driven serial hybrid aircraft. The advantageous combination of an electric motor and controllable-pitch electric propeller was also explored. The results are used to be able to control efficiency and noise at constant thrust and therefore constant airspeed. Manufacturer provided electric motor and propeller data is used for efficiency purposes. Since the electric motor is virtually silent compared to the propeller, published …

Structural Design Of A Business Jet Winglet, Jaime Gutierrez

Doctoral Dissertations and Master's Theses

Structural sizing of a winglet for the Falcon 10 was performed and is presented here. The aerodynamic profile of the winglet was taken from a previous study, which predicted an increase in range of 3.3% with an estimated weight increase of 52 kg. An investigation of the current structure layouts and materials used in the industry was conducted. Six loading cases were analyzed to identify the most critical for the winglet, found to be negative and positive sideslip and gust. A finite element model was developed and used to size the structure. A fabrication process and assembly is described and …

Collision Avoidance And Navigation Of Uas Using Vision-Based Proportional Navigation, Matthew J. Clark

Doctoral Dissertations and Master's Theses

Electro-optical devices have received considerable interest due to their light weight, low cost, and low algorithm requirements with respect to computational power. In this thesis, vision-based guidance laws are developed to provide sense and avoid capabilities for unmanned aerial vehicles (UAVs) operating in complex environments with multiple static and dynamic collision threats. These collision avoidance guidance laws are based on the principle of proportional navigation (Pro-Nav), which states that a UAV is on a collision course with another vehicle or object if the line-of-sight (LOS) angles to the object remain constant. The guidance laws are designed for use with monocular …

Uav As A Service: Providing On-Demand Access And On-The-Fly Retasking Of Multi-Tenant Uavs Using Cloud Services, Justin Yapp

Doctoral Dissertations and Master's Theses

As commercial roles for Unmanned Aerial Vehicles (UAVs) become more well-defined and demand for the services provided by them increases, UAVs rely more on new cloud computing services and co-operative coordination to provide mission planning, control, tracking and data processing. We present UAV as a Service (UAVaaS) framework, which brings features commonly found in traditional cloud services, such as Infrastructure, Platform, and Software as a Service, to the domain of UAVs. Our work aims to conceptualize and design UAVaaS for commercial applications. Specifically, a cloud-provided orchestration framework that allows multi-tenant UAVs to easily serve multiple heterogenous clients at once and …

2d Aeroacoustic Analysis Of Flow In The Flame Trench, Meghan Pokorski

Doctoral Dissertations and Master's Theses

We present here a methodology for using the commercial software ANSYSFLUENT to predict the acoustic field associated with Space-Launch System (SLS). We consider a two-dimensional model of flame deflector, and flame trench. The ANSYS code is then used to simulate the internal flow. Both the steady state case is considered along with other cases where the inflow has a harmonic component. A Ffowcs-Williams Hawking (FWH) surface is then constructed within the computational domain to use the computed flow fluctuations to obtain the acoustic field. The acoustic data was then compared to the experimental data.

When using the ANSYS code for …

Aerodynamic Trade Study Of Compound Helicopter Concepts, Julian Roche

Doctoral Dissertations and Master's Theses

The relative performance attributes of compound helicopter concepts have been examined, including their potential for meeting the requirements of several challenging mission profiles. For each concept, which included lift and/or propulsive compounding, a suite of aerodynamic performance models was developed using energy methods. In the case of a lift-compounded concept, an aerodynamic model representing the force interaction effects of the main rotor wake with the wing was also developed. Models of a conventional helicopter and of a tiltrotor were implemented as well, and the results used as a datum for comparison. In each case, the predictive capabilities of the model …

Aerodynamic And Structural Design Of A Winglet For Enhanced Performance Of A Business Jet, Nicolas El Haddad

Doctoral Dissertations and Master's Theses

The preliminary design of a winglet to improve the range and fuel burn of the Falcon 10 business jet is presented. Twelve candidate geometries were studied varying the cant angle and the span. The configuration offering the best compromise between induced drag reduction, profile drag increase and weight increase due to the winglet structure and necessary wing structural reinforcement was selected. More refined analysis was performed for that winglet with Reynolds averaged Navier-Stokes computational fluid dynamics and finite element analysis. Range and fuel burn were finally calculated for a typical mission using these refined results. The selected winglet, with a …

Aircraft De-Icing System Using Thermal Conductive Fibers, Min Soon Park

Doctoral Dissertations and Master's Theses

The accumulation of ice on the leading edges of aircraft wing poses complications for flight control as drag is increased with a tendency for higher relative turbulence over the wing. Pre-emptive and reactive ice removal techniques have been employed in the past by electromechanical, thermal, chemical and pneumatic methods. In this thesis, a carbon fiber fabric is utilized as a heating de-icer for composites aircraft wing surface structures. Two prototypes are constructed, tested to generate temperature profiles, and an appropriate heating voltage is selected for effective de-icing via distinct avenues of heating system configurations. The heat transfer efficiency of the …

Development Of An Exteroceptive Sensor Suite On Unmanned Surface Vessels For Real-Time Classification Of Navigational Markers, Christopher Lloyd Kennedy

Doctoral Dissertations and Master's Theses

This thesis presents the development of an exteroceptive sensor suite for real-time detection and classification of navigational markers on Unmanned Surface Vessels. Three sensors were used to complete this task: a 3D LIDAR and two visible light cameras. First, all LIDAR points were transformed from the sensor’s reference frame to the local frame using a Kalman filter to estimate instantaneous vehicle pose. Next, objects were chosen from the LIDAR data to be classified using either Multivariate Gaussian or Parzen Window Classifiers. Both produce 96% accuracy or better, however, multivariate Gaussian ran considerably faster than the Parzen and was simpler to …

The Effects Of Rewards On The Ability Of An Autonomous Uav Controlled By A Reinforcement Learning Agent To Accomplish A Target Localization Task, Hemali Dinesh Virani

Doctoral Dissertations and Master's Theses

The need for Unmanned Aerial System (UASs) is increasing in the fields of science, security, military and others. With an increasing number of challenges faced by mankind the need for system with advance autonomous and intelligent capabilities is growing rapidly. The required intelligent behavior can be achieved in an unmanned system with machine learning methods such as Reinforcement Learning (RL) theory. This theory presents algorithms which have the capability to learn how to adapt to its environment. Using RL methods, autonomous systems have the ability to use past experiences to improve future mission performance. In this research, the effects of …

Robust And Adaptive Nonlinear Control Of Limit Cycle Oscillations In Uavs Using Synthetic Jet Actuators, Natalie Ramos Pedroza

Doctoral Dissertations and Master's Theses

Limit cycle oscillations (LCO), also known as utter, cause significant challenges in fight control of unmanned aerial vehicles (UAVs), and could potentially lead to structural damage and catastrophic failures. LCO can be described as vibrational motions in the pitching and plunging displacements of an aircraft wing. Even in low Reynolds number (low-Re) fight regimes, LCO can exceed the limiting boundary for safe UAV fight. Further, as practical considerations motivate the design of smaller, lighter weight UAVs, there is a growing need for UAV systems that do not require heavy mechanical actuators (e.g., ailerons). To address this, the use of synthetic …

The Development Of A Force Balance For Testing Micro Aerial Vehicles, Michael Christopher King

Doctoral Dissertations and Master's Theses

The purpose of this work was to create a six degree of freedom balance that could produce meaningful data for micro aerial vehicles. Research was conducted to investigate the common balance configurations, and the strengths and weaknesses of each configuration were used to select the most appropriate design. The limitations of available fabrication facilities, the desired level of performance and the end user of the balance were all considered to finalize the design. The balance and data acquisition system were fabricated over a period of several months, and unforeseen design issues were handled forthwith. Rigorous calibration and testing processes were …

State Of The Art Of Piloted Electric Airplanes, Nasa's Centennial Challenge Data And Fundamental Design Implications, Lori Anne Costello

Doctoral Dissertations and Master's Theses

The purpose of this study was to determine the current state of the electric airplane as primarily defined by results from NASA's Green Flight Challenge Competition. New equations must be derived in order to determine the endurance and range for electric airplanes since the standard equations depend upon weight change over a flight and the weight of an electric airplane does not change. These new equations could then be solved for the optimal velocity and altitude which were the two driving factors that could change range and endurance for a given airplane configuration. The best velocity for range and endurance …

Experimental Investigation And Cfd Simulation Of Active Damping Mechanism For Propellant Slosh In Spacecraft Launch Systems, Dhawal Leuva

Doctoral Dissertations and Master's Theses

Motion of propellant in the liquid propellant tanks due to inertial forces transferred from actions like stage separation and trajectory correction of the launch vehicle is known as propellant slosh. If unchecked, propellant slosh can reach resonance and lead to complete loss of the spacecraft stability, it can change the trajectory of the vehicle or increase consumption of propellant from the calculated requirements, thereby causing starvation of the latter stages of the vehicle. Predicting the magnitude of such slosh events is not trivial. Several passive mechanisms with limited operating range are currently used to mitigate the effects of slosh. An …

Preliminary Design Of An Asteroid Hopping Mission, Michael D. Scheppa

Doctoral Dissertations and Master's Theses

In 2010, NASA announced that its new vision is to support private space launch operations. It is anticipated that this new direction will create the need for new and innovative ideas that push the current boundaries of space exploration and contain the promise of substantial gain, both in research and capital.

The purpose of the study is to plan and estimate the feasibility of a mission to visit a number of near Earth asteroids (NEAs). The mission would take place before the end of the 21st century, and would only use commercially available technology. Throughout the mission design process, while …

Formation Feedback Control Of Uav Flight, Stephen Stegall

Doctoral Dissertations and Master's Theses

This thesis is a study of formation control with autonomous unmanned aerial vehicles using the formation as feedback. There is also an investigation of formation methods presenting insight into different algorithms for formations. A rigid formation is achieved using a proportional-derivative virtual structure with a formation feedback controller. There is an emphasis on stick controlled aerodynamics. The rigid formation is verified by a simulation of a longitudinal model. Formation control ideas are presented for rigid formations.