Aerospace Engineering Commons^™

Effect Of Flow-Acoustic Resonant Interactions On Aerodynamic Response Of Transitional Airfoils, Joseph Hayden

Doctoral Dissertations and Master's Theses

A high-accuracy numerical study is conducted to examine the impact of flow-acoustic resonant interactions on the aerodynamic response of symmetric and cambered airfoils in the realistic transitional flow regimes with Rec=140,000 and M=0.0465 as well as the low Reynolds number flow regime with Rec=10,000 and M=0.2. The symmetric NACA-0012 and the cambered SD7003 airfoils are investigated at various angles of attack that have been found previously to include both the tone and no-tone producing regimes, with specific focus on the aerodynamic lift response. Additional simulations are conducted with a low-intensity synthetic turbulence introduced upstream of the airfoils in order to …

A Computer Program For The Coupled Implementation Of Meanline And Throughflow Methods To Simplify The Aerodynamic Design Of Multistage Axial Compressors, Alexander V. Rozendaal

Doctoral Dissertations and Master's Theses

A computer program capable of simplifying the preliminary aerodynamic design process of multistage axial compressors has been developed. This interactive design tool, named C-STAAC, combines the Meanline and Throughflow analysis capabilities of two independent compressor design codes to form one standalone system. The program greatly improves the efficiency of the Preliminary-to-Throughflow stages of compressor design by providing fully coupled interaction between the two platforms. The result enables the user to produce stacked airfoil geometry from only a handful of initial input parameters.

The program additionally offers a wide selection of pre- and post-processing capabilities that were not previously available with …

Cognitive Loading, Affect Regulation And Aerodynamic Considerations In Uninhabited Aerial Vehicle Systems Refueling Operations, Sam Holley, Ian R. Mcandrew

Publications

Factors influencing aerodynamics involved in aerial refueling illustrate the potential for specialist operators to manage these operations for remotely piloted vehicles. The authors review aerodynamic characteristics of uninhabited aerial systems during refueling, drogue and boom design and associated flight dynamics, cognitive factors associated with control transfer and refueling, and affective components and their influence on decision making and operator performance. Attention is directed to cognitive loading and encoding challenges, with considerations for hippocampal mapping and hemispheric asymmetry. Implications for system state awareness are examined. Advantages for specially trained refueling pilot operators are discussed and recommendations given for areas of concentration.

Lift & Drag Reductions On Iced Wings During Take Off And Landing With Unmanned Aerial Vehicles, Ian R. Mcandrew

Publications

This research paper addresses an novel problem that has not been addressed in detail for many decades. Ice formation on aircraft has procedures and protocols to deal with expected and actual problems. Complex modern aircraft are equipped with a variety of techniques to remove Ice formation on an aircraft, especially the wings. The introduction of Unmanned Aerial Vehicles has added an old problem, that of low speed and the lack of power to overcome losses in lift through ice formation. In this research the different types of Ice formation, how they combine and affect Lift and Drag are also addresses …

Analysis Of Road Vehicle Aerodynamics With Computational Fluid Dynamics, Christian Armando Mata

Open Access Theses & Dissertations

A road vehicles aerodynamics can be one of the most influential aspects of its performance. With the increased importance on fuel efficiency in recent years, new road vehicles are being developed smaller in size, with smaller displacement engines, as well as with improved aerodynamics. The aerodynamics of a vehicle can have a significant effect on its fuel efficiency, as well as other important aspects of the vehicles performance such as the top speed, acceleration, and handling. A study focusing on analyzing aerodynamic effects due to vehicle geometries such as wheels covered by the vehicles body in comparison to open wheels …

Aerodynamic Trade Study Of Compound Helicopter Concepts, Julian Roche

Doctoral Dissertations and Master's Theses

The relative performance attributes of compound helicopter concepts have been examined, including their potential for meeting the requirements of several challenging mission profiles. For each concept, which included lift and/or propulsive compounding, a suite of aerodynamic performance models was developed using energy methods. In the case of a lift-compounded concept, an aerodynamic model representing the force interaction effects of the main rotor wake with the wing was also developed. Models of a conventional helicopter and of a tiltrotor were implemented as well, and the results used as a datum for comparison. In each case, the predictive capabilities of the model …

Book Review: High G Flight - Physiological Effects And Countermeasures, Stefan Kleinke

International Journal of Aviation, Aeronautics, and Aerospace

This review provides insight on the content and a review of the quality of the recent release of High G Flight - Physiological Effects and Countermeasures from Ashgate Publications.

This review does not reflect the views of IJAAA or ERAU. This work was not peer reviewed.

High G Flight - Physiological Effects and Countermeasures

Aerodynamic And Structural Design Of A Winglet For Enhanced Performance Of A Business Jet, Nicolas El Haddad

Doctoral Dissertations and Master's Theses

The preliminary design of a winglet to improve the range and fuel burn of the Falcon 10 business jet is presented. Twelve candidate geometries were studied varying the cant angle and the span. The configuration offering the best compromise between induced drag reduction, profile drag increase and weight increase due to the winglet structure and necessary wing structural reinforcement was selected. More refined analysis was performed for that winglet with Reynolds averaged Navier-Stokes computational fluid dynamics and finite element analysis. Range and fuel burn were finally calculated for a typical mission using these refined results. The selected winglet, with a …

Surface Structure And Its Effect On Reducing Drag, Ragini Ramachandran

Doctoral Dissertations and Master's Theses

A miniature subsonic open return wind tunnel was designed and fabricated to measure drag on small test models at low Reynolds numbers. The wind tunnel featured a sensitive strain gauge type load cell. The average drag coefficient of sphere and cube test models were used to validate the miniature wind tunnel, and the values obtained were consistent with published results over the range of Reynolds numbers tested. These initial results gave confidence that the tunnel could be used to study the effects of surface finish on the drag of various models. Several fabrics with differing ribbed surface structures, including a …

Advancements In Uncertainty Quantification With Stochastic Expansions Applied To Supersonic And Hypersonic Flows, Thomas Kelsey West Iv

Doctoral Dissertations

"The primary objective of this study was to develop improved methodologies for efficient and accurate uncertainty quantification with stochastic expansions and apply them to problems in supersonic and hypersonic flows. Methods introduced included approaches for efficient dimension reduction, sensitivity analysis, and sparse approximations. These methods and procedures were demonstrated on multiple stochastic models of hypersonic, planetary entry flows, which included high-fidelity, computational fluid dynamics models of radiative heating on the surface of hypersonic inflatable aerodynamic decelerators during Mars and Titan entry. For these stochastic problems, construction of an accurate surrogate model was achieved with as few as 10% of the …

Modal Characterization And Structural Dynamic Response Of A Crane Fly Forewing, Jose E. Rubio

LSU New Orleans Theses and Dissertations

This study describes a method for conducting the structural dynamic analysis of a crane fly (family Tipulidae) forewing under different airflow conditions. Wing geometry is captured via micro-computed tomography scanning. A finite element model of the forewing is developed from the reconstructed model of the scan. The finite element model is validated by comparing the natural frequencies of an elliptical membrane with similar dimensions of the crane fly forewing to its analytical solution. Furthermore, a simulation of the fluid-structure interaction of the forewing under different airflows is performed by coupling the finite element model of the wing with a …

3d Aerodynamic Optimization Of Nrel Vi Wind Turbine Blade For Increased Power Output And Visualization Of Flow Characteristics, Tsewang Rabga Shrestha

Doctoral Dissertations and Master's Theses

The thesis focuses on the aspect of optimization of NREL VI wind turbine blade for increased power output using commercial solver ANSYS 14.5. The power curve obtained from BEMT, Baseline NREL VI CFD Simulations and Optimized Blade Simulations are compared with experimental results. Over prediction is observed in the theoretical result while computational analysis under predicts power produced at post stall region. Parameter correlation and sensitivity analysis study relates the effectiveness of design parameters on the objective outcome. Scatter plots and Determination Matrix indicate the problem setup as non-linear quadratic. Adaptive Single Objective Optimization algorithm is used for the optimization …

Use Of A Rolling Road System In Crosswind Conditions, Mau-Kuo Chen

Mechanical & Aerospace Engineering Theses & Dissertations

Wind tunnel testing continues to play an important role in vehicle aerodynamic development. Accurate results are strongly associated with whether the wind tunnel can closely simulate the on-road conditions, including the Reynolds number and all boundary conditions. Rolling road systems (or moving belts) have been a successful tool for many auto makers and racing teams to simulate the relative motion between the stationary vehicle model and the floor in the test section. The mechanism of the rolling road system is simple, but how it affects the adjacent flow field and how this flow interacts with the flow underneath the vehicle …

Investigation Of Pulse Detonation Engines; Theory, Design And Analysis, Jeff Vizcaino

Doctoral Dissertations and Master's Theses

Detonation and constant volume combustion has been known to the scientific community for some time but only recently has active research been done into its applications. Detonation based engines have received much attention in the last two decades because of its simple design and potential benefits to the aerospace industry. It is then the goal of this study to provide a background into detonation theory and application and establish the basis for future detonation based research at Embry-Riddle Aeronautical University. In this paper we will discuss the experimental aspects of building, testing, and analysis of a pulsed detonation tube …

Design And Performance Of Circulation Control Geometries, Rory Martin Golden

Master's Theses

With the pursuit of more advanced and environmentally-friendly technologies of today’s society, the airline industry has been pushed further to investigate solutions that will reduce airport noise and congestion, cut down on emissions, and improve the overall performance of aircraft. These items directly influence airport size (runway length), flight patterns in the community surrounding the airport, cruise speed, and many other aircraft design considerations which are setting the requirements for next generation aircraft. Leading the research in this movement is NASA, which has set specific goals for the next generation regional airliners and has categorized the designs that meet the …

Computational Analysis Of A Wing Oscillator, Ryne Derrick Radermacher

Masters Theses

An analysis of a newly proposed wind power extraction device called a wing oscillator was performed using computational fluid dynamics (CFD). A wing oscillator is a device that consists of two airfoils attached to a central pivot by means of a frame or shaft. Oscillatory motion is produced by controlling the angle of attack of the airfoils as a fluid flow is passed over the device. A robust mathematical scheme was developed to investigate the performance of the wing oscillator and was hooked to the CFD software package FLUENT through User Defined Functions (UDFs). Using the dynamic meshing analysis methods …

Heat, Mass And Force Flows In Supersonic Shockwave Interactions, John Michael Dixon

UNLV Theses, Dissertations, Professional Papers, and Capstones

There is no cost effective way to deliver a payload to space and, with rising fuel prices, currently the price to travel commercially is also becoming more prohibitive to the public. During supersonic flight, compressive shock waves form around the craft which could be harnessed to deliver an additional lift on the craft. Using a series of hanging plates below a lifting wing design, the total lift generated can be increased above conventional values, while still maintaining a similar lift-to-drag ratio. Here, we study some of the flows involved in supersonic shockwave interaction. This analysis uses ANSYS Fluent Computational Fluid …

Cfd Study On Aerodynamic Effects Of A Rear Wing/Spoiler On A Passenger Vehicle, Mustafa Cakir

Mechanical Engineering Master's Theses

Aerodynamic characteristics of a racing car are of significant interest in reducing car-racing accidents due to wind loading and in reducing the fuel consumption. At the present, modified car racing becomes more popular around the world. Sports cars are most commonly seen with spoilers, such as Ford Mustang, Subaru Impreza, and Chevrolet Corvette. Even though these vehicles typically have a more rigid chassis and a stiffer suspension to aid in high-speed maneuverability, a spoiler can still be beneficial. One of the design goals of a spoiler is to reduce drag and increase fuel efficiency. Many vehicles have a fairly steep …

Designing The Human-Powered Helicopter: A New Perspective, Gregory Hamilton Gradwell

Master's Theses

The concept of human-powered vertical flight was studied in great depth. Through the manipulation of preexisting theory and analytical methods, a collection of design tools was created to expediently conceptualize and then analyze virtually any rotor. The tools were then arranged as part of a complete helicopter rotor design process. The lessons learned as a result of studying this process—and the tools of which it consists—are presented in the following discussion. It is the belief of the author that by utilizing these tools, as well as the suggestions that accompany them, future engineers may someday build a human-powered helicopter capable …

A Numerical Study Of Novel Drag Reduction Techniques For Blunt Bodies In Hypersonic Flows, Christopher Marley

Masters Theses

"Numerical simulations of a full three-dimensional hemispherical body in hypersonic flow are conducted and innovative techniques involving forward injection of gas from the stagnation point of the sphere are investigated; techniques include annular (ring) and swirled injection both with and without upstream energy deposition. Objectives of the analysis are the assessment of 1) drag reductions achieved on the blunt body (including the detrimental drag effect caused by the forward-facing injection itself) and 2) stability characteristics of the jet. Studies are conducted at free-stream Mach numbers of 10 and 6.5 at standard atmospheric conditions corresponding to 30 km altitude. While centered …

Optimization And Oscillation Of A Two-Dimensional Bump To Enhance Airfoil Performance, Dinesh Atchala

Mechanical & Aerospace Engineering Theses & Dissertations

The objective of this project is to improve the aerodynamic performance of an aircraft in transonic speed using a two dimensional contour bump. A natural laminar flow airfoil, RAE5243, has been chosen for the validation case to demonstrate the adequacy of the flow solver used in this study. 2D contour bump is parameterized as the bump position via airfoil, the crest position via bump, maximum height and length of the bump for the parametric study. After these studies, one of the gradient based optimization techniques is utilized to optimize the 2D bump parameters to achieve an augmentation in lift-to-drag …

Development Of Morphing Aircraft Structure Using Smp, Soo-Chan Jee

Theses and Dissertations

The U.S Air Force needs new aircraft which provide longer flight time, less fuel consumption, better aerodynamics in order to perform Air Force missions successfully as the mission environment changes rapidly. A morphing wing aircraft is considered as a potential new aircraft for those missions. This thesis explores Shape Memory Polymer (SMP) properties test results and its application for morphing wing skin. Several SMP composite laminates were considered for investigating shape changing characteristics required for morphing skin. The braided composite preforms used in making SMP composites were explored in morphing wing operating system based on the results of property tests. …

Quantification Of Uncertainty In Aerodynamic Heating Of A Reentry Vehicle Due To Uncertain Wall And Freestream Conditions, Benjamin R. Bettis

Masters Theses

"The primary focus of this study is to demonstrate an efficient approach for uncertainty quantification of surface heat flux to the spherical non-ablating heatshield of a generic reentry vehicle due to epistemic and aleatory uncertainties that may exist in various parameters used in the numerical solution of hypersonic, viscous, laminar blunt-body flows with thermo-chemical non-equilibrium. Two main uncertainty sources were treated in the computational fluid dynamics (CFD) simulations: (1) aleatory uncertainty in the freestream velocity and (2) epistemic uncertainty in the recombination efficiency for a partially catalytic wall boundary condition. The Second-Order Probability utilizing a stochastic response surface obtained with …

A Numerical Investigation Of Flowfield Modification In High-Speed Airbreathing Inlets Using Energy Deposition, Matthew Flynn Rohweder

Masters Theses

"Energy deposition in front of dual-mode ram/scramjet engines is numerically investigated utilizing two-dimensional CFD for its potential to modify inlet/isolator flow-fields for engine start/unstart control and for its general potential for generating large-scale flow-field modification in such flows. A simplified (high Mach number) constant-area duct geometry is initially defined in order to test the feasibility of the concept; the results from this initial investigation demonstrates possible beneficial effects of depositing energy upstream of a thermally choked duct in terms of causing massive changes in flow patterns, including the reestablishment of supersonic flow throughout the duct. This study is followed by …

Analysis Of Wake Vortices Of A Medium Range Twin-Propeller Military Cargo Aircraft Using Statistically Designed Experiments, Burhan Sahin

Mechanical & Aerospace Engineering Theses & Dissertations

An experimental study was initiated to analyze the trajectories of the streamwise vortices behind the wing tip and flap of a medium range and propeller driven twin-engine military cargo aircraft. The model used for the experimental study was a generic, high wing and half model of a propeller driven aircraft and mounted within Old Dominion University's Low Speed Wind Tunnel where the wind tunnel flow speed was set to constant value of 9 m/sec. The main purpose of the study was to reach regression models for the motion and vorticity strength of both vortices under varying factors such as angle …

Alternative Methods To Standby Gain Scheduling Following Air Data System Failure, Matthew W. Coldsnow

Theses and Dissertations

The United States Air Force has advanced fighter aircraft that lose the ability to operate in a large portion of their operating flight envelope when an air data system failure is experienced. These aircraft are reverted to a fixed set of standby-gains that limit their maneuverability, degrade handling qualities, and increase susceptibility to departure. The purpose of this research was to determine if three alternative methods of standby-gain-scheduling could provide robust control with minimal performance degradation despite the lack of air data. To accomplish this, three methods of standby-gain-scheduling were developed, integrated, and tested in the Infinity Cube simulator at …

A System For Measuring The Lift And Drag Forces Of A Spinning Golf Ball Held Fixed Within A Wind Tunnel, Ryan R. Miller

Master's Theses

A system was designed, built and tested in order to test the aerodynamic properties of a standard golf ball in a wind tunnel manufactured by ELD, Inc. model 406(B). The system consists of a rotating shaft, on which the golf ball is attached, connected to a two-axis force transducer. Additionally, an automated data acquisition system was built for enhanced precision of measurements. Data for wind speeds up to 160 ft/s and rotational speeds up to 8,600 rpm were obtained and analyzed. The purpose of the designed apparatus was to allow for studies to better understand the lift and drag coefficients …

Computational And Experimental Investigation Of The Flow Structure And Vortex Dynamics In The Wake Of A Formula 1 Tire, John Axerio, Gianluca Iaccarino, Emin Issakhanian, Chris Elkins, John Eaton

Mechanical Engineering Faculty Works

The flowfield around a 60% scale stationary Formula 1 tire in contact with the ground in a closed wind tunnel was examined experimentally in order to assess the accuracy of different turbulence modeling techniques. The results of steady RANS and Large Eddy Simulation (LES) were compared with PIV data, which was obtained within the same project. The far wake structure behind the wheel was dominated by two strong counter-rotating vortices. The locations of the vortex cores, extracted from the LES and PIV data as well as computed using different RANS models, showed that the LES predictions are closest to the …

Study Of The Influence Of Nacelle And Pylon On Aerodynamics Of A New Vu Design, Romain Larose

Master's Theses - Daytona Beach

The purpose of this thesis was to illustrate the influence of the nacelle and pylon on aerodynamics of a new Very Light Jet design, using Computational Fluid Dynamics.

The objective of the first phase was to repair the existing CATIA model in order to facilitate the meshing process.

The second and third phase was to create two meshes: a mesh for the complete model (aircraft with nacelle and pylon), and a second for the aircraft alone.

The two problems have been solved at cruise conditions using Navier-Stokes equations with a second order accuracy.

The model complying with theory, the results …

Cfd As Applied To The Design Of Short Takeoff And Landing Vehicles Using Circulation Control, Tyler M. Ball

Master's Theses

The ability to predict the distance required for an aircraft to takeoff is an essential component of aircraft design. It involves aspects related to each of the major aircraft systems: aerodynamics, propulsion, configuration, structures, and stability and control. For an aircraft designed for short takeoffs and landings (STOL), designing the aircraft to provide a short takeoff distance, or more precisely the balanced field length (BFL), often leads to the use of a powered lift technique such as circulation control (CC). Although CC has been around for many years, it has never been used on a production aircraft. This is in …