Aerospace Engineering Commons^™

Methodology For Convergence Of The Training Program With The Professional Activities Of Aviation Specialists, Zair Ziyaevich Shamsiev

International Journal of Aviation, Aeronautics, and Aerospace

The method of developing curricula for training aviation specialists for civil aviation of the Republic of Uzbekistan is analyzed. It is substantiated that it does not sufficiently take into account the labor market requirements for the composition and content of academic disciplines. An overview of foreign experience in bridging the gap between educational programs and the workplace is given. A method based on a statistical analysis of civil aviation regulations is recommended.

Folding Methodology For Flexible Aircraft Interiors, Aditya Venkatesh, Fengfeng (Jeff) Xi, Joon Chung

International Journal of Aviation, Aeronautics, and Aerospace

This paper establishes a general furniture folding methodology that is aimed at flexible aircraft cabin interiors. This methodology will allow users to modify existing furniture pieces to their liking and thereby customizing their overall travel experience. The folding methodology also includes a process to quantify the transformation of the furniture pieces. This paper also introduces two design concepts called Open-on-Demand and Reconfiguration to allow passengers to modify an otherwise rigid cabin. The advantages of the multi-functional space saving furniture pieces are also illustrated in this paper. While the general folding methodology was developed for aircraft interiors, it can be adapted …

Remote Pilot Situational Awareness With Augmented Reality Glasses: An Observational Field Study, Jeffery Coleman, David Thirtyacre

International Journal of Aviation, Aeronautics, and Aerospace

With the use of small unmanned aerial systems (sUAS) proliferating throughout industry and public safety, it is imperative to ensure safety of flight. The Federal Aviation Administration (FAA) published regulations for commercial use of sUAS in 2016 and included the requirement to maintain visual line-of-sight with the aircraft at all times. However, due to the nature of the sUAS ground control stations (GCS), remote pilots time-share between observing the aircraft and interacting with the display on the GCS. Time-sharing between the aircraft and GCS can be seen as similar to the cross-check a pilot uses when flying a manned aircraft. …

A Model For Inhalation Of Infectious Aerosol Contaminants In An Aircraft Passenger Cabin, Bert A. Silich

International Journal of Aviation, Aeronautics, and Aerospace

Aerosol contamination of an aircraft cabin by infectious passengers is a concern of passengers, aircrew and the aviation industry. This may be especially important during a pandemic, such as COVID-19, where the full extent of aerosol transmission is not well understood. A statistical method to determine the number of infectious passengers on board along with a mathematical model estimating the contaminant concentration of aerosols in the cabin and the number of inhaled infectious particles by passengers is presented. An example is used to demonstrated how the results can be estimated during normal operations and emergency conditions with malfunctions of the …

Aerodynamic Performance Analysis Of Co-Flow Jet Airfoil, C M Vigneswaran, Vishnu Kumar G C

International Journal of Aviation, Aeronautics, and Aerospace

The work in this paper aims to increase the maximum lift coefficient of the airfoil by implementing the co-flow jet concept on NACA 0018 airfoil and also to investigate the performance of co-flow jet (CFJ) airfoil. To conduct numerical solution, RANS equations have been solved for 2D incompressible and unsteady flow using the Spalart-Allmaras turbulence model. The suction surface of the airfoil is modified by placing the injection slot near the leading edge and the suction slot near the trailing edge. A small mass of air is withdrawn into the airfoil suction slot, pressurized by a pumping system located inside …

Identification Of Wind-Induced Hazard Zones Impacting Uas Bridge Inspection, Jack J. Green, John Mott

International Journal of Aviation, Aeronautics, and Aerospace

Unmanned Aerial Systems (UAS) continue to grow in both popularity and utility within the national airspace system. The use of commercial UAS for civil inspection, specifically that of bridge structures, is becoming commonplace among practitioners and academics alike. The development of an integrated bridge-inspection hazard model provides a way for UAS operators to prepare for and respond to changing environmental conditions that could otherwise prevent a successful UAS flight. The interaction of wind-induced airflow with bridge surfaces creates an aerodynamic wake that can result in hazardous conditions for a UAS platform operating in close proximity. An analysis of this airflow …

Support To Design For Air Traffic Management: An Approach With Agent-Based Modelling And Evolutionary Search, Gabriella Gigante, Roberto Palumbo, Domenico Pascarella, Alessandro Pellegrini, Gabriella Duca, Miquel Angel Piera, Juan José Ramos

International Journal of Aviation, Aeronautics, and Aerospace

This paper presents a methodology to manage the support to design in ATM operations. We propose a workflow for the design of ATM solutions in a performance-based setting. The methodology includes the evaluation of the impact on human behaviour and exploits a combination of different paradigms, such as Agent-Based Modelling and Simulation, and Agent-Based Evolutionary Search. We prove the soundness of the methodology by carrying out a real case study, which is the transition from Direct Routing to Free Routing in the Italian airspace. The validation results exhibit limited errors for the assessment of the performance metrics under evaluation. Furthermore, …

Predictability Improvement Of Scheduled Flights Departure Time Variation Using Supervised Machine Learning, Deepudev Sahadevan, Palanisamy Ponnusamy Dr, Manjunath K. Nelli Mr, Varun P. Gopi Dr

International Journal of Aviation, Aeronautics, and Aerospace

The departure time uncertainty exacerbates the inaccuracy of arrival time estimation and demand for arrival slots, particularly for movements to capacity constrained airports. The Estimated Take-Off Time (ETOT) or Estimated Departure Time(ETD) for each individual flight is currently derived from Air Traffic Flow Management System (ATFMS), which are solely determined based on individual flight plan Estimated Off Block Time(EOBT) or subsequent delays updated by Airline. Even if normal weather conditions prevail, aircraft departure times will differ from ETOTs determined by the ATFMS due to a number of factors such as congestion, early/delayed inbound flight (linked flights), reactionary delays and air …

Numerical Analysis Of Aerospike Engine Nozzle Performance At Various Truncation Lengths, Sam Dakka Dr, Oliver Dennison

International Journal of Aviation, Aeronautics, and Aerospace

The aerospike engine was first devised in the early 1960s where it provided new means of reaching orbit in a single stage. The paper aimes to demonstrate the viability of the technology by showcasing the increased nozzle thrust efficiency over the conventional bell nozzle. Various truncations were applied to the nozzle and each was subjected to two conditions, an over-expansion and near optimum condition. The nozzle contour was developed using the simple approximation method and was chosen to replicate that of the XRS-2200. This anchored the data, thereby validating the computational fluid dynamics (CFD) simulation. Simulations were completed for at …

Small Unmanned Aircraft Systems Acoustic Analysis For Noninvasive Marine Mammal Response: An Exploratory Field Study, David Thirtyacre, Gennifer Brookshire, Sarah Callan, Brittany Arvizu, Patrick Sherman

International Journal of Aviation, Aeronautics, and Aerospace

As in countless other fields of human endeavor, small unmanned aircraft systems (sUAS) have the potential to benefit pinniped (Pinnipedia; e.g., Phocidae [seals], Otariidae [sea lions], and Odobenidae [walruses]) response efforts. The employment of sUAS could give responders a close-up look at animals in distress in order to determine their condition as well as develop a response strategy. However, unlike other subjects that are regularly inspected by sUAS (e.g., croplands and civil infrastructure) pinnipeds may respond to the distinctive sound generated by small, multirotor sUAS. This reaction may include retreating into the water en masse, which could put …

Quantum Safety Metrics Framework For Commercial Unmanned Aircraft Operators, Tracy L. Lamb, Nathan A. Phillips, Trong Van Nguyen

International Journal of Aviation, Aeronautics, and Aerospace

Commercial unmanned aircraft systems continue to increase in applications and diversity; however, mishaps and accidents erode safety, investment return, and efficiency. Most unmanned aircraft accidents are preceded by leading indicators; the ability to forecast and quantify these may provide increased safety and profitability. This mixed-method research study used a non-experimental parallel convergence approach with multiple instruments, multiple-case study n = 22, and one exemplar case design to develop a quantum safety metric program. This study used a combination of previously validated methods as development instruments, including; the HFACS, STAMP, 'Sierra Scale,' and Accident Prevention Effort equations. The study extended the …

Albatross And Falcon Inspired Bionic Uav: An Aerodynamic Analysis, Bilji C. Mathew, Sagar K. Sahu, Prantik Dutta, Rushi Savale, Muruga Lal Jeyan Jv Dr.

International Journal of Aviation, Aeronautics, and Aerospace

The drone industry yearns for enhanced aerodynamic performance. In order to achieve this feat, researchers and engineers are trying to mimic the natural flyers due to their aerodynamic optimality. One such flyer, the Albatross is an inspiration for many marine drones due to its planform and aerodynamic efficiency. The wing of the plan form is designed and simulated to study its properties. The Bell-Shaped Lift Distribution is incorporated for higher efficiency and elimination of the total downwash produced in case of an Elliptical Lift Distribution. A blended wing body inspired by the Falcon is used for smoother airflow interactions. Furthermore, …

Digitalization Of Educational And Methodological Support For The Training Of Aviation Dispatchers, Zair Ziyaevich Shamsiev

International Journal of Aviation, Aeronautics, and Aerospace

The tasks of improving the educational process of training civil aviation dispatchers on the basis of the development and implementation of digital teaching aids are considered. Legislative and regulatory documents are accepted as an object of digitalization. The end result of the research is expressed in the provision of the educational process with a special electronic educational complex, which has the functions of providing the necessary information and conducting practical exercises to deepen, consolidate and control knowledge in the field of aviation documents.

Comparative Study On Performance Accuracy Of Three Probe And Five Probe Flow Analysers For Wind Tunnel Testing, Akhila Rupesh Ms, J V Muruga Lal Jeyan Dr

International Journal of Aviation, Aeronautics, and Aerospace

In the field of inviscid fluid flow studies, the theoretical concept has to be developed even more. In order to make it possible, it is very important to supplement the concepts with strong experimental results. While performing experimentation, various accepts of design can be determined with factors influencing the and also required modification can be recommended in a more systematic and economic manner. Also, the aim objective of the experiment is to extend the underlying theory and to produce new designs with improvements that can be great support to the advancement in technology. In experimental analysis, wind tunnels are used …

Aircraft Exhaust Gas Temperature Value Mining With Rough Set Method, Mustagime Tülin Yıldırım Asst. Prof., Mehtap Taşcı

International Journal of Aviation, Aeronautics, and Aerospace

Aircrafts are one of the most important means of transportation today. For aircrafts to be able to serve safely, their maintenance must be done in a timely and complete manner. In addition to regular maintenance, it may appear suddenly; there is also irregular maintenance performed in cases such as lightning strikes, bird strikes, and hard landings. Engine failures and maintenance has great importance in aircraft maintenance. Using the data recorded during the flight by flight data recorder, the engine health condition is monitored and the necessary maintenance procedures are carried out. In this study, the exhaust gas temperature was estimated …

Aerodynamic Characterization Of Bio-Mimicked Pleated Dragonfly Aerofoil, Md Akhtar Khan, Chinmaya Padhy

International Journal of Aviation, Aeronautics, and Aerospace

The work inspired by the dragonfly wing corrugation positioned at the front wing's radius section lying at 40% of the total wingspan of forewing from the root section. During gliding flight, dragonfly wings presumed to be an ultra-light aerofoil due to its well-defined cross-sectional corrugation. The aerodynamic simulation carried out to understand the aerodynamic performance of a bio-mimetic dragonfly corrugated airfoil at low Reynolds number range of 75000-150000 to explore the potential advantages of pleated airfoils at a varying angle of attack from 0° to 12°. CFD analysis accomplished by using ANSYS Fluent to understand the aerodynamic performance of the …

Comparative Study On The Prediction Of Aerodynamic Characteristics Of Mini - Unmanned Aerial Vehicle With Turbulence Models, Somashekar V, Immanuel Selwyn Raj A

International Journal of Aviation, Aeronautics, and Aerospace

When dealing with CFD simulations the turbulent nature is seen on most of the engineering flows and these flows need to be solved. Reliable and applicable CFD outputs can be obtained from the accurate modelling of the turbulence as it is one of the most vital elements of CFD modelling. The RANS equations are extensively employed to analyse the complex flows over aircraft and for this purpose, a turbulence model is needed for turbulent flow analyses. Compatible turbulence must be chosen for the exact predictions of aircraft aerodynamic characteristics. In this report, numerical analyses of Mini-UAV are done to compare …

Design Of A Laboratory Annular Combustor, Sathish Dharmalingam, Kartik Dolarkumar Kothari

International Journal of Aviation, Aeronautics, and Aerospace

Combustion lies at the heart of gas turbine technology. The combustor is the power source that aids the acceleration of flight. It provides the core functionality of adding heat through the controlled burn of the air-fuel mixture, converted into mechanical energy with the help of turbines. This extracted power has been used to produce thrust in the case of aircraft or to produce electrical energy in the case of industrial gas turbines. Designing an annular combustor involves a rigorous iterative process, and there is no systematic procedure available to design a small-scale laboratory combustor, used for research and academic purposes. …

A Mathematical Analysis Of The Wind Triangle Problem And An Inquiry Of True Airspeed Calculations In Supersonic Flight, Leonard T. Huang, Lisa I. Cummings

International Journal of Aviation, Aeronautics, and Aerospace

In the first half of this paper, we present a fresh perspective toward the Wind Triangle Problem in aerial navigation by deriving necessary and sufficient conditions, which we call "go/no-go conditions", for the existence/non-existence of a solution of the problem. Although our derivation is based on simple trigonometry and basic properties of quadratic functions, it is mathematically rigorous. We also offer examples to demonstrate how easy it is to check these conditions graphically. In the second half of this paper, we use function theory to re-examine another problem in aerial navigation, namely, that of computing true airspeed — even in …

Internet Of Things 36-Rotor Multicopter For Ionizing Radiation Surveying, Svetoslav Zabunov, Garo Mardirossian, Rositsa Miteva, Todor Kunchev

International Journal of Aviation, Aeronautics, and Aerospace

This paper presents an Internet of things 36-rotor unmanned aerial vehicle suitable for radiological surveying of buildings and facilities. The design of the 36-rotor multicopter platform is disclosed. The aircraft is used as a testbed for a lightweight gamma/beta/neutron ionizing radiation sensor closely coupled with the autopilot of the multirotor aircraft. A prototype of the drone and sensor was developed and initial tests were conducted. Test results are presented with data from measuring different radiation sources. The proposed novel design is compared to existing work and advantages to the latter were established.

Modeling And Simulation Of Electromagnetic Fields To Maintain Bone Density During Prolonged Low Gravity Exposure, Austin Tapp, Michael Francis, Michel A. Audette

Electrical & Computer Engineering Faculty Publications

Astronauts in a long term, low-gravity environments experience bone density loss at 10 times the rate of those diagnosed with osteoporosis. One treatment effective at maintaining bone density in osteoporotic individuals is electromagnetic field (EMF) therapy. Tools that induce EMFs are becoming increasingly prevalent, but to amplify osteogenesis and encourage superior bone density retention for astronauts, ideal EMF therapy parameters must be determined on patient-specific bases. Therefore, this study explores simulation environments that elucidate highly favorable EMF factors. Pulsed electromagnetic field and combined magnetic field generating devices are variably introduced near partient-specific, finite element (FE) models of the femur, spine, …

Nebulizer-Based Systems To Improve Pharmaceutical Aerosol Delivery To The Lungs, Benjamin M. Spence

Theses and Dissertations

Combining vibrating mesh nebulizers with additional new technologies leads to substantial improvements in pharmaceutical aerosol delivery to the lungs across therapeutic administration methods. In this dissertation, streamlined components, aerosol administration synchronization, and/or Excipient Enhanced Growth (EEG) technologies were utilized to develop and test several novel devices and aerosol delivery systems. The first focus of this work was to improve the poor delivery efficiency, e.g., 3.6% of nominal dose (Dugernier et al. 2017), of aerosolized medication administration to adult human subjects concurrent with high flow nasal cannula (HFNC) therapy, a form of continuous-flow non-invasive ventilation (NIV). The developed Low-Volume Mixer-Heater (LVMH) …

Simultaneous Machining Of Aerospace Structural Materials Using Poly-Drills, Muhammad Aamir

Theses: Doctorates and Masters

Despite the growth of composites and other lightweight materials, aluminium alloys remain an attractive choice for the aerospace industry due to their distinct manufacturing processes, good resistance to fatigue crack growth and superior damage tolerance. In the aerospace industry, the drilling process is widely used among all the machining processes as millions of holes are required to produce riveted and bolted joints in the assembly operation of the aircraft's structures. The major challenges which arise from the drilling of these alloys are characterized by the low hole quality, which might initiate cracks within the airframe structure and reducing their reliability. …

Using Smart-Wifi Thermostat Data To Improve Prediction Of Residential Energy Consumption And Estimation Of Savings, Abdulrahman Alanezi, Kevin P. Hallinan, Rodwan Elhashmi

Mechanical and Aerospace Engineering Faculty Publications

Energy savings based upon use of smart WiFi thermostats ranging from 10 to 15% have been documented, as new features such as geofencing have been added. Here, a new benefit of smart WiFi thermostats is identified and investigated; namely, as a tool to improve the estimation accuracy of residential energy consumption and, as a result, estimation of energy savings from energy system upgrades, when only monthly energy consumption is metered. This is made possible from the higher sampling frequency of smart WiFi thermostats. In this study, collected smart WiFi data are combined with outdoor temperature data and known residential geometrical …

Cooperative Navigation Of Small Satellites In The Deep Space Environment, Jill Christine Davis

Doctoral Dissertations

“The continued development of small satellites (SmallSats) has made them an increasingly viable mission alternative to traditional monolithic spacecraft. Constellations, swarms, and formations of these small spacecraft have the potential to fill unique gaps in the space systems architecture, while reducing overall mission costs and increasing mission redundancy. Cooperative navigation between spacecraft within swarms and formations is critical to mission success, but poses many challenges for SmallSats due to their size, mass, power, and computing constraints. While Earth orbiting missions can rely on GNSS data for high-accuracy inertial and relative navigation, deep space missions require new navigation techniques. In this …

Multiple-Site Fatigue Cracking Methodology To Assess Structural Integrity Of Aircraft Riveted Panels, Haroldo Chacon

Masters Theses

“Multiple Site Damage (MSD) is the most common source of Widespread Fatigue Damage (WFD) affecting structural integrity of aging aircraft fleets. Therefore, an understanding of its progression, the development of methods to prevent the onset, and the maintenance procedures precluding WFD are important to improve aircraft fleet longevity. A reliable and efficient numerical methodology to perform detailed Multiple Site Damage assessment in riveted structural joints was developed. A probabilistic methodology was employed in conjunction with Monte Carlo simulation technique; the fatigue initiation life at every potential crack initiation site was determined and initial damage scenarios were generated. Probabilistic crack growth …

Composite-Based Additive Manufacturing Applications In The Polymer Injection Molding Cycle, Cody Bivens

Masters Theses

“The experimental method utilized in this research was the application of composite-based additive manufacturing (CBAM) mold plates in the injection molding process. The mold plates comprised carbon fibers and polyether ether ketone (PEEK) matrix. Modifications were made to the mold plates post manufacturing in order to properly adapt to the rest of the injection molding die. A custom cooling system was engineered and integrated into the injection molding machine for the CBAM mold plates. The polymer processed in the injection molding cycle for this study was Lustran 348 acrylonitrile butadiene styrene (ABS). The result of the trials conducted in this …

Analysis Of Turbulence Model Uncertainty For Canonical Flow Problems Including Shock Wave Boundary Layer Interaction Simulations, Aaron James Erb

Doctoral Dissertations

"The purpose of this research is to present results of an uncertainty and sensitivity analysis study of commonly used turbulence models in Reynolds-Averaged Navier-Stokes (RANS) codes due to the epistemic uncertainty in closure coefficients for a set of turbulence model validation cases that represent the structure of several canonical flow problems. The study focuses on the analysis of a 2D zero pressure gradient flat plate, a 2D wall mounted hump, and an axisymmetric shock wave boundary layer interaction, all of which are well documented on the NASA Langley Research Center Turbulence Modeling Resource website. The Spalart-Allmaras (SA), the Wilcox (2006) …

Theoretical Study Of Magnetic Particles In A Shear Flow Subjected To A Uniform Magnetic Field, Christopher A. Sobecki

Doctoral Dissertations

"Magnetic manipulation of non-spherical magnetic microparticles is important for applications in shape-based and magnetic-based separations such as waste management, disease diagnostics, drug delivery, and mining. Manipulations of magnetic microparticles also include chain formation to assemble compositions for electronics, drug loading designs, and magnetorheological fluids for smart armor, hydraulic brakes, and dampers. In microfluidic devices, separation-formation-effectiveness depends on the shape of the channel, the shear rate, and the magnetic field strength and direction.

Particle separation and chain formation involved highly complex and computational expense-demanding studies in microfluidic devices, magnetic fields, and particle- particle/wall interactions. This research took complex experimental studies and …

Active Gravity Offloading System With Infrared Tracking For Rover Testing, Travis Wavrunek

Dissertations, Master's Theses and Master's Reports

Gravity offloading is a tool used to test how different gravitational forces will impact the mobility of rovers bound for Lunar or Martian expeditions. Previous approaches have been successful in simulating partial gravity environments, and this report details how the Infrared- Gravity offload (IRGO) system, developed for the Planetary Surface Technology Development Laboratory (PSTDL) and lunar simulant sandbox, has a similar aim. Through a series of iterations, IRGO has been developed to actively track an infrared beacon and follow a rover within the test chamber to eliminate inertial and friction forces along two horizonal axes. A portion of a rover’s …