Aerospace Engineering Commons^™

Analysis For Hybrid Rocket Fuel Regression Using Stereolithographic Geometry, Michael P. King

Theses and Dissertations

Hybrid Rocket Engines (HRE) have characteristically low fuel regression that limits their performance. Additive manufacturing and rapid prototyping can possibly solve some of the problems with Hybrid propulsion regression by creating geometry not possible with conventional manufacturing. This work is attempting to make geometric regression simulation of HRE easier by using STereoLithography (STL files) as the geometry. This analysis sets flow conditions, boundary conditions, propellant selection, and allows for fuel geometry to be altered to simulate geometry’s effects on regression rate and propellant performance. This model can be used for more advanced geometric analysis to improve and predict performance.

Measuring Pilot Control Force In General Aviation: Strain Gauges And Load Cell, Benjamin David Wyma

Theses and Dissertations

Flight test requires a variety of sensors and data systems to accurately read variables on an aircraft during testing. One of these important variables is the pilots control force. Control force is used in many tests in flight test to ensure the aircraft being tested meets the required FAA standards. One essential test is stick free longitudinal stability where control force is needed to calculate the stick free neutral points of the aircraft [1]. The objective of the project was to explore two methods of electronically measuring control force and determining which method is best suited for Florida Institute of …

Test And Evaluation Of An Artec Leo 3d Scanner, Chelsea Alexis Reichard

Theses and Dissertations

With new and innovative technologies, companies have begun utilizing 3-Dimensional Scanners to reverse engineer objects of virtually any size or complexity. These scanners increase efficiency, allowing companies to import physical items into the computer without the hassle of modeling it themselves in Computer Aided Design (CAD) software. Although these highly advanced devices can be very fast and effective, we will be studying the surfaces that are incompatible to these scanners. The study performed in this research will test the limitations of a new, highly advanced, wireless 3D Scanner; The Artec Leo. For many scanners, including the one used in this …

High Performance Thermal Straps For A Full Range Of Application Temperatures, M. Ralphs, M. Sinfield, M. Felt

Space Dynamics Laboratory Publications

Thermal straps are an essential component when using vibration sensitive instruments and cryocoolers in close proximity. Thermal straps conduct heat from the instrument to the cryocooler while limiting the amount of mechanical vibration the cryocooler transfers back to the instrument. Thermal straps are made from flexible, thermally conductive materials. Traditionally, they are made of metal – aluminum or copper, mostly – that has been formed into thin foils, wires, or braids to provide greater flexibility while still providing good thermal conductivity. These metallic straps, if made from pure metals, provide superior thermal performance at cryogenic temperatures ( < 60 K ) where their thermal conductivities peak to extraordinary levels. Pyrolytic graphite sheet (PG S) thermal straps have a thermal conductance that peaks at higher temperatures – approximately 160 K – and provide much higher mass-specific thermal conductance at temperatures above 60 K than metallic straps. This paper discusses the pros and cons of aluminum, copper, and PG S thermal straps along with different techniques to test their thermal and mechanical performance.

Flight Tests Of Trajectory Energy Management Systems Using A Vertical Takeoff And Landing Vehicle, Emils Senkans

Theses and Dissertations

The rise of new aircraft propulsion methods (e.g. powered by batteries, fuel cells or hybrid electric systems), the increased use of automated and integrated flight control systems, and the envisioned use of personal Vertical Takeoff and Landing (VTOL) vehicles in urban environments (urban aerial mobility) leads to novel technical and regulatory challenges for aircraft manufacturers, certification authorities and operators. Of primary concern is operational safety, and closely connected pilot situation awareness and workload. A particular safety factor for operating VTOL vehicles that depend on propulsive lift for the majority of their operations and that are operated over urban terrain, is …

Conical Orbital Mechanics: A Rework Of Classic Orbit Transfer Mechanics, Cian Anthony Branco

Mechanical & Aerospace Engineering Theses & Dissertations

Simple orbital maneuvers obeying Kepler’s Laws, when taken with respect to Newton’s framework, require considerable time and effort to interpret and understand. Instead of a purely mathematical approach relying on the governing relations, a graphical geometric conceptual representation provides a useful alternative to the physical realities of orbits. Conic sections utilized within the full scope of a modified cone (frustum) were employed to demonstrate and develop a geometric approach to elliptical orbit transformations. The geometric model in-question utilizes the rotation of a plane intersecting the orbital frustum at some angle β (and the change in this angle) in a novel …

The Effect Of Compaction Temperature And Pressure On Mechanical Properties Of 3d Printed Short Glass Fiber Composites, Pushpashree Jain Ajith Kumar Jain

Mechanical & Aerospace Engineering Theses & Dissertations

Among many thermoplastics that are used in engineering, polyamide 6 (nylon 6) is an extremely versatile engineering thermoplastic. Nylon filled with glass fibers has higher mechanical strength and high wear resistance than general purpose nylon. 3D printed composites, based on fused filament modeling, typically suffer from poor bead-to-bead bonding and relatively high void content, limiting their mechanical properties

This thesis explores the effect of compaction pressure and temperature on improving the mechanical properties of 3D printed composites. Engineering moduli in the printing and transverse to printing direction, as well as ultimate strength were measured using the tensile testing with Digital …

Space-Based Countermeasure For Hypersonic Glide Vehicle, Robert Joseph Fowler Iv

Mechanical & Aerospace Engineering Theses & Dissertations

The purpose of this thesis is to investigate the effectiveness of a space-based laser weapon system for countering a hypersonic glide vehicle. Hypersonic glide vehicles are an emerging type of weapon system which combine the range of ballistic missiles with the maneuverability of cruise missiles. These systems pose a unique threat to military assets not only for their expanded capabilities but also for the lack of an effective defensive countermeasure. Space-based laser weapon systems may offer a solution to this problem. The dynamics of a space-based laser system defending against a hypersonic glide vehicle are modeled first. The governing equations …

Onboard Autonomous Controllability Assessment For Fixed Wing Suavs, Brian Edward Duvall

Mechanical & Aerospace Engineering Theses & Dissertations

Traditionally fixed-wing small Unmanned Arial Vehicles (sUAV) are flown while in direct line of sight with commands from a remote operator. However, this is changing with the increased popularity and ready availability of low-cost flight controllers. Flight controllers provide fixed-wing sUAVs with functions that either minimize or eliminate the need for a remote operator. Since the remote operator is no longer controlling the sUAV, it is impossible to determine if the fixed-wing sUAV has proper control authority. In this work, a controllability detection system was designed, built, and flight-tested using COTS hardware. The method features in-situ measurement and analysis of …

Experimental And Computational Analysis Of Progressive Failure In Bolted Hybrid Composite Joints, John S. Brewer

Theses and Dissertations

Composite materials are strong, lightweight, and stiff making them desirable in aerospace applications. However, a practical issue arises with composites in that they behave unpredictably in bolted joints, where damage and cracks are often initiated. This research investigated a solution to correcting the problem with composite bolted joints. A novel hybrid composite material was developed, where thin stainless steel foils were placed between and in place of preimpregnated composite plies during the cure cycle to reinforce stress concentrations in bolted joints. This novel composite was compared to control samples experimentally in quasi-static monotonic loading in double shear configuration in 9-ply …

Existence Of Ballistic Capture Transfer Trajectories From Trans-Lunar Injection To Lunar Polar Orbit For All Lunar Phases At Time Of Departure, Anthony Lawrence Genova

Theses and Dissertations

This dissertation reveals several families of trajectories that can reduce the change in velocity(ΔV) required to transfer from trans-lunar injection (TLI) to a lunar polar circular orbit with 100 km altitude by up to 26.5% compared to conventional transfers. The primary hypothesis states that such trajectories, termed lunar polar ballistic capture (LPBC) transfers, exist for all lunar phases at the time of lunar departure (i.e., initial lunar flyby).The existence of LPBC transfers for all lunar phases can enable missions with ride-share restrictions (CubeSat), limited propellant capability (small spacecraft), and/or payloads that are not time sensitive (cargo).Evidence to support the primary …

Assessing Observer Stations For Cislunar Space Domain Awareness, Michael S. Rosenof

Theses and Dissertations

With renewed worldwide interest in cislunar space, the need for reliable domain awareness in that extended region of space is clear. This investigation quantifies the suitability of several possible stations for observer satellites in cislunar space by calculating the specific irradiance each would observe as they track satellites in various realistic lunar free-return trajectories across a decade, using reflected sunlight. This investigation includes one class of free return trajectories for target satellites, eleven distinct observer stations, and three different metrics for comparing the effectiveness of each observer station or combination of observer stations for sensing targets using reflected sunlight. The …

Electro-Optic Satellite Constellation Design Using Multi-Objective Genetic Algorithm, Yasin Tamer

Theses and Dissertations

Satellite constellation design is a complex, highly constrained, and multidisciplinary problem. Unless optimization tools are used, tradeoffs must be conducted at the subsystem level resulting in feasible, but not necessarily optimal, system designs. As satellite technology advances, new methods to optimize the system objectives are developed. This study is based on the development of a representative regional remote sensing constellation design. This thesis analyses the design process of an electrooptic satellite constellation with regional coverage considerations using system-level optimization tools. A multi objective genetic algorithm method is used to optimize the constellation design by utilizing MATLAB and STK integration. Cost, …

Closed-Loop Propulsive Control For Very Low Perigee Orbit Energy Management And Stabilization, Tyler J. Gardner

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Within the past decade, the United States Air Force has begun exploring options for using smaller satellites, known as SmallSats and CubeSats, to decrease the time it takes to design and build new satellites. If used properly, a rapid development environment for satellites could improve the Air Force's ability to respond to new technologies and threats. Other organizations such as NASA and universities have been using SmallSats and CubeSats for research and development missions.

While smaller satellites are usually much cheaper to develop and require less time to create, limited volume strictly constrains the size of instrumentation and avionics that …

Analytic Guidance Strategies For Passively Safe Rendezvous And Proximity Operations, Simon Shuster

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

A safety ellipse is a type of relative motion trajectory that is commonly used for unmanned rendezvous and proximity operations. As the name suggests, safety ellipses are passively safe relative motion trajectories, which means that their natural motion inherently maintains a low collision risk. The focus of this dissertation is the derivation, analysis, and application of guidance strategies that reconfigure, establish, and exit a safety ellipse. The guidance strategies consist of a set of ∆v vectors and impulse times, all written in closed form. Through applications of optimal control theory and parameter optimization, it is shown that these maneuver …

Transonic Small-Disturbance Theory/Integral Boundary Layer Airfoil Data For The Low-Fidelity Common Research Model, Jeffrey D. Taylor, Douglas Hunsaker

Browse all Datasets

Lift, Drag, and Moment Coefficient data for the Low-Fidelity Common Research Model wing airfoil sections.

Specifying Space Defense Operator Interfaces Through The Application Of Cognitive Systems Engineering And Prototyping, Justin E. Oryschak

Theses and Dissertations

The Department of Defense needs better tools to support its operators as they strive to defend its space assets. The growing sophistication of anti-satellite weapons increasingly challenges the nation’s orbital communications and surveillance infrastructure. Operators face difficulties gathering useful information and dealing with the complexity of potential enemy actions. This research applied cognitive systems engineering and ecological interface design (EID) methodologies to create a prototype space mission management tool that enhances operator situation awareness and decision-making ability. Applied cognitive task analysis interviews were used to document space operator decision-making in their domain. Model-based systems engineering was applied to integrate work …

Hexakis Icosahedron Frame-Skin Vacuum Lighter Than Air Vehicle, Brian Cranston, Anthony N. Palazotto

AFIT Patents

A vacuum lighter than air vehicle (VLTAV) includes a rigid frame of rods connected together to form a hexakis icosahedron. A membrane skin covers the rigid frame and defines therewith a vessel configured to hold an internal vacuum that allows the vessel to float in the air. The plurality of rods and membrane skin have weights and dimensions that result in a neutral and/or positive buoyancy for the vessel while preventing geometric instability.

Advanced Concepts For Multiengine Airplane Flying, Nihad E. Daidzic

Aviation Department Publications

FAA Safety Webinar (GL15102159) held online at 9:00 CST on Saturday, November 21, 2020.

An Investigative Study Of Combustion And Emissions With Noise And Vibrations Of Synthetic Fuels Within An Aero-Gas Turbine, Camille J. Phillips

Honors College Theses

The pollution from the aerospace transportation is rapidly becoming the largest source of greenhouse gas (GHG) emissions. The FAA expects aviation emissions to almost triple by 2050, making the aerospace industry responsible for the release of approximately 25% of the global carbon dioxide budget. These aviation emissions, including CO2 and NOx, as well as other GHGs, contribute to the destruction of ozone layer. Carbon dioxide emissions have a particularly negative effect on humans, leading to airway diseases especially in children and elderly. To combat the addition of further GHG emissions into the atmosphere, it is necessary to minimize the usage …

A Ranking Method To Prioritize Vfr Airports To Be Provided With Instrument Approach Procedures, Marcelo Soares Leao, Gustavo A.M. Ortegal Leal, Fabio Rodrigues Paukoski Fernandes

Graduate Student Works

The primary purpose of this work is to investigate the necessity of a more comprehensive and systematic method to prioritize airports to be provided with instrument approach and landing procedures in the Brazilian air transportation landscape. An overview of the main contributors to risks associated with the approach and landing phases is provided, covering the most important aspects of unstable approaches and CFIT events. Considering the emergence of Terrain Awareness and Alerting Systems (TAWS), the role of its contribution to safety is discussed, as well as the certification context related to the design, installation, and operation of those systems. A …

Effect Of Cold Work Expansion On The Fatigue Life Of Pre-Cracked Al 2024-T3, Christopher Leirer

Doctoral Dissertations and Master's Theses

No abstract provided.

Geomagnetic Aided Dead-Reckoning Navigation, Andrei Cuenca

Doctoral Dissertations and Master's Theses

The dependence of modern navigation methods on global positioning systems has led to developing alternative algorithms for localization, capable of providing reliable and robust estimations. Global position system is commonly used in a vast majority of the world’s devices, and it can supply real time position and velocity information. However, its accuracy can be compromised by external operational effects such as signal availability, cyber-attacks or weather conditions. This thesis investigates an alternative approach to enhance navigation in GPS-denied environments. Particularly, it develops an integrated navigation architecture based on geomagnetic referencing models capable of dead reckoning at GPS denied intervals. A …

Efficient Yield Estimation Of Multiband Patch Antennas By Polynomial Chaos-Based Kriging, Leifur Leifsson, Xiaosong Du, Slawomir Koziel

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Yield estimation of antenna systems is important to check their robustness with respect to the uncertain sources. Since direct Monte Carlo sampling of accurate physics-based models can be computationally intensive, this work proposes the use of the polynomial chaos–Kriging (PC-Kriging) metamodeling method for fast yield estimation of multiband patch antennas. PC-Kriging integrates the polynomial chaos expansion (PCE) as the trend function of Kriging metamodel since the PCE is good at capturing the function tendency and Kriging is good at matching the observations at training points. The PC-Kriging method is demonstrated on two analytical cases and two multiband patch antenna cases …

Model Based Systems Engineering For A Venture Class Launch Facility, Walter Mcgee Taraila

Mechanical & Aerospace Engineering Theses & Dissertations

A study of Model-Based Systems Engineering (MBSE) applied to a small-lift launch facility is presented. The research uses Systems Modeling Language (SysML) products and functional diagrams to document the structure, controls, electrical power, hydraulic, safety mechanisms, software, and fluid ground systems on a launch pad. The research is motivated by the need to design complex systems with an unambiguous understanding that improves communication, quality, productivity, and reduces risk. A model is developed following the ISO/IEC-15288 technical process framework. The stakeholder requirements are defined and analyzed to provide traceability to individual systems and subsystems. An architectural design is realized and implemented …

Study Of Control Schemes For Series Hybrid-Electric Powertrain For Unmanned Aerial Systems, Darren A. Dehesa Jr

LSU Master's Theses

Hybrid-Electric aircraft powertrain modeling for Unmanned Aerial Systems (UAS) is a useful tool for predicting powertrain performance of the UAS aircraft. However, for small UAS, potential gains in range and endurance can depend significantly on the aircraft flight profile and powertrain control logic in addition to the subsequent impact on the performance of powertrain components. Small UAS aircraft utilize small-displacement engines with poor thermal efficiency and, therefore, could benefit from a hybridized powertrain by reducing fuel consumption. This study uses a dynamic simulation of a UAS, representative flight profiles, and powertrain control logic approaches to evaluate the performance of a …

Enhancement Of Fracture Toughness In Secondary Bonded Cfrp Using Hybrid Thermoplastic/Thermoset Bondline Architecture, A. Yudhanto, M. Almulhim, F. Kamal, R. Tao, L. Fatta, M. Alfano, G. Lubineau

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Structures made of carbon fiber-reinforced polymer (CFRP) can be assembled using adhesive bonding. However, such bonding is prone to brittle delamination, and a method to improve delamination resistance is desirable. Here, we propose a technique to introduce crack-arrest features that increase the R-curve response by engineering the adhesive bond line/interface. We specifically designed a wavy net-like thermoplastic insert that was embedded into the thermoset adhesive bond line where the new mechanisms of energy dissipation were generated. We demonstrate that the technique is effective at improving mode I fracture toughness of secondary bonded carbon/epoxy by more than 400%. The hybrid thermoset/thermoplastic …

Finite-Time State Estimation For An Inverted Pendulum Under Input-Multiplicative Uncertainty, Sergey V. Drakunov, William Mackunis, Anu Kossery Jayaprakash, Krishna Bhavithavya Kidambi, Mahmut Reyhanoglu

Publications

A sliding mode observer is presented, which is rigorously proven to achieve finite-time state estimation of a dual-parallel underactuated (i.e., single-input multi-output) cart inverted pendulum system in the presence of parametric uncertainty. A salient feature of the proposed sliding mode observer design is that a rigorous analysis is provided, which proves finite-time estimation of the complete system state in the presence of input-multiplicative parametric uncertainty. The performance of the proposed observer design is demonstrated through numerical case studies using both sliding mode control (SMC)- and linear quadratic regulator (LQR)-based closed-loop control systems. The main contribution presented here is the rigorous …

Finite-Time State Estimation For An Inverted Pendulum Under Input-Multiplicative Uncertainty, William Mackunis, Sergey V. Drakunov, Anu Kossery Jayaprakash, Krishna Bhavithavya Kidambi, Mahmut Reyhanoglu

Publications

A sliding mode observer is presented, which is rigorously proven to achieve finite-time state estimation of a dual-parallel underactuated (i.e., single-input multi-output) cart inverted pendulum system in the presence of parametric uncertainty. A salient feature of the proposed sliding mode observer design is that a rigorous analysis is provided, which proves finite-time estimation of the complete system state in the presence of input-multiplicative parametric uncertainty. The performance of the proposed observer design is demonstrated through numerical case studies using both sliding mode control (SMC)- and linear quadratic regulator (LQR)-based closed-loop control systems. The main contribution presented here is the rigorous …

Maximum Evaporating Flux Of Molecular Fluids From A Planar Liquid Surface, Eric Bird, Zhi Liang

Mechanical and Aerospace Engineering Faculty Research & Creative Works

In This Work, We Use the Kinetic Theory of Gases (KTG) to Develop a Theoretical Model to Understand the Role of Internal Motions of Molecules on the Maximum Evaporation Flux from a Planar Liquid Surface. the Kinetic Theory is Applied to Study the Evaporation of Molecular Fluids into a Vacuum and Predict the Dimensionless Maximum Evaporation Flux (JR,max, I.e., the Ratio of the Maximum Evaporation Flux to the Molar Flux Emitted from a Liquid Surface). the Key Assumptions Regarding the Velocity Distribution Function (VDF) of Polyatomic Molecules in the Highly Nonequilibrium Vapor Near the Evaporating Surface Are Validated by the …