Aerospace Engineering Commons^™

An Afternoon With General Thomas P. Stafford, Stafford Air & Space Museum

Programs

An Afternoon with General Thomas P. Stafford

Sunday, May 19th, 2019 at 2:00 P.M. at the Weatherford High School Performing Arts Center.

Unless stated otherwise within this repository collection, all materials are shared under the following Creative Commons license: [Creative Commons Attribution-NonCommercial 4.0 International License].

Apollo 10, 50th Anniversary Gala, Stafford Air & Space Museum

Programs

The Apollo 10 50th Anniversary Gala was held on May 18th, 2019 at the Stafford Air & Space Museum in Weatherford, Oklahoma.

Unless stated otherwise within this repository collection, all materials are shared under the following Creative Commons license: [Creative Commons Attribution-NonCommercial 4.0 International License].

Computation Of Flow Fields Due To Single- And Twin-Jet Impingement, Xiang Zhang

McKelvey School of Engineering Graduate Student Theses & Dissertations

The thesis consists of two parts. The first part focuses on numerical simulations and their comparison with experimental data for single-jet impingement on ground. Angles between the axisymmetric jet and impingement surface considered are 15, 30 and 90 degree. It is shown that both the k-epsilon and Wray-Agarwal (WA) model can predict the flow fields in good agreement with the experimental results. The second part extends the first part to twin-jet normal impingement on the ground. It focuses on numerical simulation of fountains formed by the twin-jet impingement. The fountains can be normal straight upward when the two jets are …

Sufficient Conditions For Optimal Control Problems With Terminal Constraints And Free Terminal Times With Applications To Aerospace, Sankalp Kishan Bhan

McKelvey School of Engineering Graduate Student Theses & Dissertations

Motivated by the flight control problem of designing control laws for a Ground Collision Avoidance System (GCAS), this thesis formulates sufficient conditions for a strong local minimum for a terminally constrained optimal control problem with a free-terminal time. The conditions develop within the framework of a construction of a field of extremals by means of the method of characteristics, a procedure for the solution of first-order linear partial differential equations, but modified to apply to the Hamilton-Jacobi-Bellman equation of optimal control. Additionally, the thesis constructs these sufficient conditions for optimality with a mathematically rigorous development. The proof uses an approach …

Visualization And Machine Learning Techniques For Nasa’S Em-1 Big Data Problem, Antonio P. Garza Iii, Jose Quinonez, Misael Santana, Nibhrat Lohia

SMU Data Science Review

In this paper, we help NASA solve three Exploration Mission-1 (EM-1) challenges: data storage, computation time, and visualization of complex data. NASA is studying one year of trajectory data to determine available launch opportunities (about 90TBs of data). We improve data storage by introducing a cloud-based solution that provides elasticity and server upgrades. This migration will save $120k in infrastructure costs every four years, and potentially avoid schedule slips. Additionally, it increases computational efficiency by 125%. We further enhance computation via machine learning techniques that use the classic orbital elements to predict valid trajectories. Our machine learning model decreases trajectory …

Autonomous Watercraft Simulation And Programming, Nicholas J. Savino

Undergraduate Theses and Capstone Projects

Automation of various modes of transportation is thought to make travel more safe and efficient. Over the past several decades advances to semi-autonomous and autonomous vehicles have led to advanced autopilot systems on planes and boats and an increasing popularity of self-driving cars. We simulated the motion of an autonomous vehicle using computational models. The simulation models the motion of a small-scale watercraft, which can then be built and programmed using an Arduino Microcontroller. We examined different control methods for a simulated rescue craft to reach a target. We also examined the effects of different factors, such as various biases …

Subscale Mars Colonization Mission, Cameron J. Lamack, James Lumsden, Sean Nevin, Donner Schoeffler, Riley Evers, Alexandra Poulakos, Skyler Tan, Anthony Keba, Siraj Zaman, Ali Altamimi, Anthony Modica

Honors Thesis

The team will compete in the SAE (Society of Automotive Engineers) Aero Design West Advanced Class competition, held 5-7th April 2019 in Van Nuys, California. The team will work to develop, through research, design, optimizational trade studies, and manufacturing, a system for the deployment of parasitic aircraft, as well as payload. The system will consist of a primary fixed-wing aircraft, parasitic autonomous gliders, a real-time altitude data acquisition system, as well as both static and releasable payload. The deployable gliders must navigate autonomously to a targeting area on the ground without any on-board propulsion. The releasable payload, which will consist …

Comparison Of Induced And Parasitic Drag On Wings With Minimum Induced Drag, Sarah A. Abdel-Motaleb

All Graduate Plan B and other Reports, Spring 1920 to Spring 2023

Minimizing the induced drag for steady level flight is a variational problem that requires solving for the optimum lift distribution given a set of design constraints. From lifting-line theory, minimizing the induced drag is, in part, achieved by varying the Fourier coefficients used to describe the section lift. The elliptic lift distribution minimizes the induced drag for a wing with fixed weight and wingspan by setting all but the first coefficient to zero. If wingspan is allowed to vary, a negative third Fourier coefficient is utilized to reach an optimum lift distribution that further reduces the induced drag for stress-limited …

Production Of Liquid Fuels From Natural Gas: Simulation Of Synthesis Gas And Fischer-Tropsch Reactors, Saiedeh Arabi Bolaghi

Mechanical and Aerospace Engineering Dissertations - Archive

Gas to Liquid (GTL) processes chemically convert natural gas to valuable liquid hydrocarbon products. The GTL process considered in this research is comprised of three phases: 1) syngas production, 2) Fischer-Tropsch synthesis (FTS), and 3) product separation. This study focuses on the simulation and optimization of a GTL process to convert natural gas to more valuable liquid fuels. In syngas production, steam methane reforming (SMR) is typically used although it requires an external heat source due to the endothermic nature of the reaction. In addition, the SMR approach produces syngas with a hydrogen to carbon monoxide ratio that is not …

Gasdynamic Phenomena And Propulsive Performance Of Pulse Detonation Engines, James T. Pearce

Mechanical and Aerospace Engineering Dissertations - Archive

The pulsed detonation engine (PDE) is an advanced propulsion system that makes use of intermittent detonations to provide thrust. In recent decades, the PDE has been at the center of various propulsion research efforts focused on practical implementation of a reliable detonation-based engine for aerospace propulsion applications. However, many design challenges remain to be solved due to the PDEs unsteady operating characteristics. In particular, the unsteady nature of the thrust chamber flow field inherent to the PDE operation makes the design of nozzles aimed at adequately expanding the burned detonation products especially difficult. In order to address this design challenge, …

Onboard Payload Mass Estimation And Electric Propulsion Modeling For Multicopters With Application In Unmanned Aerial Systems, Abel Martinez Martinez Martinez

Mechanical and Aerospace Engineering Theses - Archive

Unmanned vehicles are the future. The aim of the future online retailers, delivery and transportation companies would be air delivery using unmanned aerial vehicles. Multicopters are becoming rapidly famous because they o er a relatively easy-to-fly platform that is also very stable, and their mechanical simplicity. The possibility of estimating the weight of the multicopter in real time is really useful. A weight estimation system that could be implemented in multicopters with cable suspended payloads without using any extra sensors is presented in this thesis. The weight estimation system uses a functional relationship that correlates Pulse Position Modulation (PPM) signal …

Experimental Analysis For Optimization Of Thermal Performance Of A Server In Single Phase Immersion Cooling, Pravin Ashok Shinde

Mechanical and Aerospace Engineering Theses - Archive

Liquid immersion cooling of servers in synthetic dielectric fluids is an emerging technology which offers significant cooling energy saving and increased power densities for data centers. A noteworthy advantage of using immersion cooling is high heat dissipation capacity which is roughly 1200 times greater than air. Other advantages of dielectric fluid immersion cooling include high rack density, better server performance, even temperature profile, reduction in noise. The enhanced thermal properties of oil lead to the considerable saving of both upfront and operating cost over traditional methods. In this study, a server is completely submerged in a synthetic dielectric fluid. Experiments …

Onboard Payload Mass Estimation And Electric Propulsion Modeling For Multicopters With Application In Unmanned Aerial Systems, Abel Martinez Martinez

Mechanical and Aerospace Engineering Theses - Archive

Unmanned vehicles are the future. The aim of the future online retailers, delivery and transportation companies would be air delivery using unmanned aerial vehicles. Multicopters are becoming rapidly famous because they o er a relatively easy-to-fly platform that is also very stable, and their mechanical simplicity. The possibility of estimating the weight of the multicopter in real time is really useful. A weight estimation system that could be implemented in multicopters with cable suspended payloads without using any extra sensors is presented in this thesis. The weight estimation system uses a functional relationship that correlates Pulse Position Modulation (PPM) signal …

Computational Analysis For Thermal Optimization Of Server For Single - Phase Immersion Cooling, Dhruvkumar Vimalkumar Gandhi

Mechanical and Aerospace Engineering Theses - Archive

Complete immersion of servers in synthetic dielectric fluids is rapidly becoming a popular technique to minimize the energy consumed by data centers for cooling purposes. In general, immersion cooling offers noteworthy advantages over conventional air-cooling methods as synthetic dielectric fluids have high heat dissipation capacities which are roughly about 1200 times greater than air. Other advantages of dielectric fluid immersion cooling include even temperature profile on chips, reduction in noise and addressing reliability and operational enhancements like whisker formation and electro-chemical migration. Nevertheless, lack of data published and availability of long-term reliability data on immersion cooling is insufficient which makes …

Electroextraction Across Droplet-Droplet Interface, Subhadeep Chakraborti

Mechanical and Aerospace Engineering Theses - Archive

Extraction of analytes from solvents is a crucial part of many medical, clinical, industrial and refinery processes. It is required for preconcentration of analytes into other solvents, purification of solvents and detection of harmful or toxic molecules. One of the very important methods of extraction in microfluidics is liquid-liquid extraction (LLE). LLE involves the use of two immiscible liquids for diffusion of analytes across the interface. Recently there has been a growing interest in the coupling of external electric field with LLE to enhance the extraction of charged analytes. This has led to the birth of a new extraction method …

Effect Of Dielectric Inter-Layer In Performance Of The Multi-Functional Material In Mechanical, Thermal And Environmental Loading Conditions, Rauhon Ahmed Shaik

Mechanical and Aerospace Engineering Theses - Archive

The demand for Electrical power storage devices for space shuttle, aircraft, car, bus and marine vehicles increased a great deal to have a greener and safer world. Decades of research has been done on development of light weight and high-performance energy storage devices such as batteries and structural capacitors. The use of structural capacitors can solve the high-performance energy storage requirement with no dead weight and also gives a strong structure. However, these heterogeneous materials experience different thermal expansions across the dielectric and electrodes inter layers due to which the energy storage capacity and mechanical performance evolve over time. Hence, …

Methodology To Develop Artificial Neural Network Based Control Strategies For Multiple Air-Cooling Units In A Raised Floor Data Center, Vibin Shalom Simon

Mechanical and Aerospace Engineering Theses - Archive

A data center consists of a hierarchy of systems with dedicated control algorithms dictating their operational states. We could say, there exists an ensemble of dynamical systems, each executing a control task, while the global objective is to drive the overall system to an optimum i.e. minimum total operational power at desired rack inlet temperatures. The dynamics of the Information Technology Equipment (ITE) workload and the cooling provisioning is non-linear in spatial and temporal parameter space. Data-driven modelling is one method to realistically model such non-linear dynamics and make predictions that are necessary for improved control design of the cooling …

Numerical And Experimental Study On Turbulence Production Of A Selected Mode Of Streamwise Vortex Interaction In Supersonic Flow, Davide Viganó

Mechanical and Aerospace Engineering Dissertations - Archive

The development of effective mixing strategies of air/fuel mixtures in supersonic flows has been the subject of a significant body of research for the last 60 years due to the hindering effects of compressibility. Particular attention has been focused on the introduction of streamwise vortices as a way to enhance molecular mixing both in terms of added source for hydrodynamic instabilities on classical shear-layer flows as well as for transverse jet configurations, aero-ramps and hypermixers. However, a large portion of fundamental knowledge for these complex flows is still missing. This work is centered on a numerical and experimental study of …

Characterization Of 3d Printed Pla With The Help Of Mechanical, Di-Electric And X-Ray Diffraction Techniques, Sai Sri Nidhi Munaganuru

Mechanical and Aerospace Engineering Theses - Archive

Additive manufacturing (AM) revolutionized many industries, i.e., Automotive, Biomedical, Aerospace and Defense. As opposed to traditional manufacturing methods, a part is manufactured layer by layer from 3D CAD models in AM. Though the vision of AM is impressive, there are many challenges that are hindering the widespread use of these complex parts. One of the main challenges is its strength that varies with different manufacturing parameters. We are going to investigate the effect of build parameters on the mechanical, electrical and crystalline properties of the additively manufactured heterogeneous material system. The goal of the thesis is to find a correlation …

Probabilistic Risk Assessment And The Path Planning Of Safe Task-Aware Autonomous Resilient Systems (Staars), Uluhan Cem Kaya

Mechanical and Aerospace Engineering Theses - Archive

Recent advancements on the unmanned systems manifest the potential of these technologies to impact our daily life. In particular, the unmanned aircraft systems (UAS) become ordinary for people in almost any area from aerial photography to emergency responses, from agricultural services to even autonomous deliveries. Increased autonomy and advancements in low-cost high-computing technologies made these compact autonomous solutions accessible to any party with ease. Easiness and affordability to access these systems accelerated the innovations and the novel ideas for the solution of diverse real-life problems. Despite its benefits, however, this widespread availability also resulted in the safety and regulatory concerns …

Simulation Modelling Of Thermal Runaway Propagation In Li Ion Batteries, Dhananjay Mishra

Mechanical and Aerospace Engineering Theses - Archive

Li Ion batteries are highly engineered systems which have become part and parcel of our daily lives. Safety of these systems has been in jeopardy ever since they were created. Mechanical abuse, shot circuit, overcharging or unfavorable working conditions can lead to catastrophic repercussions which might destroy complete battery pack. Previous works have investigated this problem, but many important aspects of design characteristics were left folded. This work not only investigates behavior of a single cell under adverse conditions but also lays emphasis on important factors such as thermal conductivity of the medium and cell gaps in a pack of …

Thermal Destratification Of Air Streams To Improve The Cooling Provisioning Of Air-Cooled Data Centers, Anto Joseph Barigala Charles Paulraj

Mechanical and Aerospace Engineering Theses - Archive

Air side economization is an arrangement of duct, damper and automatic control system which together allow introducing outside air to reduce the mechanical cooling during mild or cold weather thereby decrease the energy consumption. The outside ambient air and heated return air from the information technology (IT) pod is mixed inside a dedicated space to achieve a target cold aisle operating temperature and thereby increase economization. Major constrain faced by the design engineers while designing the Mixing Chamber/ Plenum is the stratification of air stream due to the Temperature gradient in the mixed air stream and this stratification can be …

Development Of A One-Equation Turbulence Model Based On K-Ε Closure And Its Extension For Computing Transitional Flows By Including An Intermittency Transport Equation, Cheng Peng

McKelvey School of Engineering Graduate Student Theses & Dissertations

No abstract provided.

Development Of A Multi-Probe Kelvin Scanner Device For Industrially-Relevant Characterization Of Surface-Activated Carbon Fiber Reinforced Thermoplastic Composites, Kirby Simon

McKelvey School of Engineering Graduate Student Theses & Dissertations

Carbon fiber reinforced thermoplastic (CFRTP) composites are becoming increasingly attractive materials in manufacturing due to their lightweight nature, mechanical strength, and corrosion resistance. Surface activation of these materials is usually required during processing to increase the bond strength of assemblies (aerospace and automotive industries) or improve adhesion with implants (biomedical industry). Industrially-relevant, nondestructive quality control methods for assessing the activation state of these materials do not currently exist, however. Applying principles discovered through the use of scanning probe microscopy, a multiple-probe Kelvin scanning (MPKS) device has been developed that can assess the uniformity of the activation state of plasma-treated CFRTP …

A Comparison Of Discrete Damage Modeling Methods: The Effect Of Stacking Sequence On Progressive Failure Of The Skin Laminate In A Composite Pi-Joint Subject To Pull-Off Load, Joseph Keith Novak

Mechanical and Aerospace Engineering Theses - Archive

Discrete damage modeling of composite failure mechanisms including delamination, matrix cracking, and their interactions was performed for the skin laminate in a composite pi-joint test specimen subject to a pull-off load. The skin laminate stacking sequence was varied, and the pull-off load and path of predicted damage were recorded. Within the study two discrete damage modeling tools were used, Abaqus XFEM with a LaRC05 built-in user subroutine and BSAM. Both tools implement failure criteria developed at the NASA Langley Research Center (LaRC) to predict the location of damage initiation and both tools use similar cohesive zone models to model damage …

Silver-Based Microbial Check Valve For Spacecraft Potable Water Systems, Rogelio E. Garcia

Chemical Engineering Undergraduate Honors Theses

As human space exploration increases, the development of a more efficient potable water treatment system suited for spacecraft becomes crucial. This Waste-management Education Research Consortium (WERC) challenge was designed to explore the viability of microbial control through the utilization of silver ions as a biocide for possible integration into the Tranquility Node 3 water purification system aboard the International Space Station (ISS). Current systems using iodine risk causing hyperthyroidism from overexposure; however, silver can be safely ingested without this side effect. After researching silver delivery methods including electrochemical ion production, controlled release, or a combination of the two, our team …

On The Anisotropic Behavior Of Electrodes For Electrical-Based Monitoring Of Cfrp Laminated Composites, Khaled Almuhammadi, Arief Yudhanto, Gilles Lubineau

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Electrical impedance tomography (EIT) is a promising structural health monitoring technique for carbon fiber-reinforced polymer (CFRP) composites. EIT technique has been specifically adopted as a non-destructive testing method along with the electrical characterization methods. Electrodes are the primary component in any EIT system because they act as an interface connecting the instrument/hardware to the structure under inspection. Simulation of electrical inspection of CFRP usually assumes the electrodes to be electrically isotropic interfaces. We show here that such isotropic assumption is a very poor approximation. We experimentally investigated the electrodes contact impedance behavior on CFRP-laminated composite specimens for different surface processing …

Internal Strain Assessment Using Fbgs In A Thermoplastic Composite Subjected To Quasi-Static Indentation And Low-Velocity Impact, M. Mulle, A. Yudhanto, G. Lubineau, R. Yaldiz, W. Schijve, N. Verghese

Mechanical and Aerospace Engineering Faculty Research & Creative Works

We present, for the first time, an experimental investigation of internal strain monitoring in thermoplastic composites subjected to quasi-static indentation and low-velocity impact using embedded fiber Bragg gratings (FBGs). The goal is to highlight the interest and limitations of the in-core instrumentation of glass fiber-reinforced polypropylene laminates subjected to these two classical loading conditions. We propose an instrumentation strategy utilizing FBGs that is expected to provide a reliable set of internal strain values and strain rates, which can be used for the analysis of the damage behavior and the validation of a numerical mesoscale model of laminates. Based on a …

Stability Analysis Of A More General Class Of Systems With Delay-Dependent Coefficients, Chi Jin, Keqin Gu, Islam Boussaada, Silviu-Iulian Niculescu

SIUE Faculty Research, Scholarship, and Creative Activity

This paper presents a systematic method to analyse the stability of systems with single delay in which the coefficient polynomials of the characteristic equation depend on the delay. Such systems often arise in, for example, life science and engineering systems. A method to analyze such systems was presented by Beretta and Kuang in a 2002 paper, but with some very restrictive assumptions. This work extends their results to the general case with the exception of some degenerate cases. It is found that a much richer behavior is possible when the restrictive assumptions are removed. The interval of interest for the …

Impact Of Immersion Cooling On Thermo-Mechanical Properties Of Pcb's And Reliability Of Electronic Packages, Shrinath Shrinivas Ramdas

Mechanical and Aerospace Engineering Theses - Archive

Immersion cooling technique is used for the thermal management of high-density data centers to avoid overheating of components and failure of servers. However, to use this as a viable cooling technique, the effect of dielectric coolants on the reliability of server components needs to be evaluated. Previous work reported contradicting findings for Young’s modulus of PCBs, providing motivation for this work. This study focuses on effect of immersion cooling on the thermos-mechanical properties of printed circuit board (PCB) and its impact on reliability of electronic packages. Changes in thermo-mechanical properties like Young’s modulus (E), Glass transition temperature (Tg), Coefficient of …