Aerospace Engineering Commons^™

Competitiveness Of Hybrid Electric Aircraft On Short Range Scheduled Flights, Johannes Anton, Hans-Joachim K. Ruff-Stahl

International Journal of Aviation, Aeronautics, and Aerospace

Hybrid electric aircraft are expected to enter the small regional aircraft market within the next two decades. The aim of this study was to investigate if a hybrid electric passenger aircraft with 50 seats can be competitive against the established 100 seat aircraft on short range scheduled flights. The Embraer EMB 145 and EMB 190 regional jets were chosen as benchmarks for that market. A hypothetical hybrid version of the EMB 145 with increased fuel efficiency was tested on a cost per available seat mile (CASM) basis. The t tests confirmed significant (p < 0.05) competitiveness of the hybrid version, while in contrast the conventional 50-seater was significantly more expensive compared to the 100seat aircraft. This indicates that hybrid aircraft could enter the short haul market with a competitive advantage, even against the established 100 seat regional jets.

The Pocketqube Standard: Issue 1, Robert J. Twiggs

Robert "Bob" Twiggs STEM Education Collection

A report titled "The PocketQube Standard Issue 1" published on June 7, 2018.

An Evaluation Of Ultrasonic Shot Peening And Abrasive Flow Machining As Surface Finishing Processes For Selective Laser Melted 316l, Rhys Gilmore

Master's Theses

Additive Manufacturing, and specifically powder bed fusion processes, have advanced rapidly in recent years. Selective Laser Melting in particular has been adopted in a variety of industries from biomedical to aerospace because of its capability to produce complex components with numerous alloys, including stainless steels, nickel superalloys, and titanium alloys. Post-processing is required to treat or solve metallurgical issues such as porosity, residual stresses, and surface roughness. Because of the geometric complexity of SLM produced parts, the reduction of surface roughness with conventional processing has proven especially challenging. In this Thesis, two processes, abrasive flow machining and ultrasonic shot peening, …

Orbital Constellation Design And Analysis Using Spherical Trigonometry And Genetic Algorithms: A Mission Level Design Tool For Single Point Coverage On Any Planet, Joseph R. Gagliano

Master's Theses

Recent interest surrounding large scale satellite constellations has increased analysis efforts to create the most efficient designs. Multiple studies have successfully optimized constellation patterns using equations of motion propagation methods and genetic algorithms to arrive at optimal solutions. However, these approaches are computationally expensive for large scale constellations, making them impractical for quick iterative design analysis. Therefore, a minimalist algorithm and efficient computational method could be used to improve solution times. This thesis will provide a tool for single target constellation optimization using spherical trigonometry propagation, and an evolutionary genetic algorithm based on a multi-objective optimization function. Each constellation will …

Investigating Forward Flight Multirotor Wind Tunnel Testing In A 3-By 4-Foot Wind Tunnel, Reed Danis

Master's Theses

Investigation of complex multirotor aerodynamic phenomena via wind tunnel experimentation is becoming extremely important with the rapid progress in advanced distributed propulsion VTOL concepts. Much of this experimentation is being performed in large, highly advanced tunnels. However, the proliferation of this class of vehicles extends to small aircraft used by small businesses, universities, and hobbyists without ready access to this level of test facility. Therefore, there is a need to investigate whether multirotor vehicles can be adequately tested in smaller wind tunnel facilities. A test rig for a 2.82-pound quadcopter was developed to perform powered testing in the Cal Poly …

Use Of Manifolds In The Insertion Of Ballistic Cycler Trajectories, Oliver K. Morrison

Master's Theses

Today, Mars is one of the most interesting and important destinations for humankind and copious methods have been proposed to accomplish these future missions. One of the more fascinating methods is the Earth-Mars cycler trajectory which is a trajectory that accomplishes repeat access to Earth and Mars with little to no fuel-burning maneuvers. This would allow fast travel to and from Mars, as well as grant the possibility of multiple missions using the same main vehicle.

Insertion from Earth-orbit onto the cycler trajectory has not been thoroughly ex- plored and the only existing method so far is a Hohmann-esque transfer …

Electrode Geometry Effects In An Electrothermal Plasma Microthruster, Harrison Raymond King

Master's Theses

Nanosatellites, such as Cubesats, are a rapidly growing sector of the space industry. Their popularity stems from their low development cost, short development cycle, and the widespread availability of COTS subsystems. Budget-conscious spacecraft designers are working to expand the range of missions that can be accomplished with nanosatellites, and a key area of development fueling this expansion is the creation of micropropulsion systems. One such system, originally developed at the Australian National University (ANU), is an electrothermal plasma thruster known as Pocket Rocket (PR). This device heats neutral propellant gas by exposing it to a Capacitively Coupled Plasma (CCP), then …

Parametrization Of Triple Screw Pumps For Aerospace Applications, Allison Putira

Doctoral Dissertations and Master's Theses

Triple Screw Pumps, a form of positive displacement pump, offer steady, high-pressure flow. In very small launch vehicles or upper stages turbopumps are not practical. This paper examines the performance of triple screw pumps to determine if they may serve as an alternative to turbopumps for use in small launch vehicles or upper stages. To this end, the geometry of the screws is first determined from the relative sizes of the screws and tooth height. From this — along with the screw angle and screw clearance — the performance parameters of flow rate, output pressure, and efficiency can be computed. …

Interplanetary Transfer Trajectories Using The Invariant Manifolds Of Halo Orbits, Megan S. Rund

Master's Theses

Throughout the history of interplanetary space travel, the Newtonian dynamics of the two-body problem have been used to design orbital trajectories to traverse the solar system. That is, that a spacecraft orbits only one large celestial body at a time. These dynamics have produced impressive interplanetary trajectories utilizing numerous gravity assists, such as those of Voyager, Cassini, Rosetta and countless others. But these missions required large amounts of delta-v for their maneuvers and therefore large amounts of fuel mass. As we desire to travel farther and more extensively in space, these two-body dynamics lead to impossibly high delta-v values, and …

Modification Of A Ground Based Atomic Oxygen Simulation Apparatus To Accommodate Three Dimensional Specimens, Charles Ward

Master's Theses

The space environment presents various challenges when designing systems and selecting materials for applications beyond Earth’s atmosphere. For mission success, these challenges must be considered. One of the detrimental aspects of the space en- vironment is Atomic Oxygen, AO. Only present in harmful quantities in Lower Earth Orbit, LEO, AO causes significant damage to materials by breaking molecular bonds. California Polytechnic State University’s, Cal Poly’s, space environments laboratory features an apparatus capable of simulating this environment. Very thin or short samples were tested to observe the mass loss due to erosion of the sample material. Recent modifications to the system …

The Effects Of Varying Composition And Build Direction On Direct Metal Deposition Fabricated Inconel 718, Abigail P. Nilan, Jessica M. Fordham

Materials Engineering

Inconel 718 (IN718) is a popular wrought superalloy, and is currently being investigated for additive manufacturing (AM) applications in the aerospace industry. However, overaging and the presence of microcracks have caused a significant reduction in properties. The purpose of this study is to meet or exceed the mechanical properties of wrought IN718 by varying the composition and build direction of the AM alloy. Alternative compositions were selected with Oerlilon Metco’s Rapid Alloy Development (RAD) software, and differ in niobium content, which increases the fraction of the primary strengthening phase (γʺ). Direct metal deposition (DMD) was used to fabricate the samples, …

Thermal Vacuum Chamber Refurbishment And Analysis, Adrian Michael Williams

Master's Theses

Spacecraft are subject to different environments while on orbit around the Earth and beyond. One of the most critical of these environments that must be counteracted is the thermal environment. Each spacecraft has an operating temperature that is specified in the mission requirements. The requirement stems from internal component operating temperatures that are critical to mission success. Prior to placing the spacecraft in orbit, engineers must be sure that the spacecraft will survive or risk losing the mission entirely.

The primary way to mitigate this risk is to use a thermal vacuum chamber (TVAC). The chamber is designed to resemble …

The Design And Implementation Of A Supersonic Indraft Tube Wind Tunnel For The Demonstration Of Supersonic Flows, Daniel Kenneth Johnson

Master's Theses

Historically, the endeavor of scale testing flight vehicles at supersonic Mach numbers, especially for long durations, has required the development of closed-loop wind tunnels, which are extremely expensive both to build and operate due to the high complexity and incredible power required to drive such a system. The intermittent blowdown wind tunnel, indraft tunnel, and shock tunnel have alleviated many of these cost requirements to some degree, whilst facilitating testing at very high Mach numbers and enthalpies; however, these systems require the handling of gases at pressures and temperatures that can be prohibitive for many university settings. The Ludwieg tube …

Determining Feasibility Of A Propulsionless Microsatellite Formation Flight Mission, Aaron Levis

Master's Theses

Benefits of developing missions with multiple formation flying spacecraft as an alternative to a traditional monolithic vehicle are becoming apparent. In some cases, these missions can lower cost and increase flexibility among other situational advantages. However, there are various limitations that are imposed by these missions that are centered on the concept of maintaining the necessary formation. One such limitation is that of the propulsion system required for each spacecraft. To mitigate the complexity and mass of the onboard propulsion, the pairing of electromagnetic actuators and differential drag to replace the functionality of a propulsive system is investigated. By using …

Evaluation Of Electrochemical And Laser Polishing Of Selectively Lasermelted 316l Stainless Steel, Julian R. Lohser

Master's Theses

Selective laser melting has shown incredible growth as a metallic additive manufacturing process in recent years. While it does provide many solutions and new ways to approach challenges, it does not come without issues of its own, namely, surface roughness. In the as-printed state, the surface roughness of selectively laser melted parts is unacceptable for use in engineering applications. Additionally, selective laser melting is used to produce complex geometries with hard to reach features, preventing conventional mechanical polishing from being successful. Therefore, it is necessary to evaluate non-mechanical polishing processes as treatments for surface roughness. In this study, electrochemical and …

Utilizing Permanent On-Board Water Storage For Efficient Deep Space Radiation Shielding, Nathan Ryan Gehrke

Master's Theses

As space technologies continue to develop rapidly, there is a common desire to launch astronauts beyond the ISS to return to the Moon and put human footsteps on Mars. One of the largest hurdles that still needs to be addressed is the protection of astronauts from the radiation environment seen in deep space. The most effective way to defend against radiation is increasing the thickness of the shield, however this is limited by strict mass requirements. In order to increase the thickness of the shield, it is beneficial to make mission critical items double as shielding material.

The human rated …

Exploring The Concept Of A Deep Space Solar-Powered Small Spacecraft, Kian Guillaume Crowley

Master's Theses

New Horizons, Voyager 1 & 2, and Pioneer 10 & 11 are the only spacecraft to ever venture past Pluto and provide information about space at those large distances. These spacecraft were very expensive and primarily designed to study planets during gravitational assist maneuvers. They were not designed to explore space past Pluto and their study of this environment is at best a secondary mission. These spacecraft rely on radioisotope thermoelectric generators (RTGs) to provide power, an expensive yet necessary approach to generating sufficient power. With Cubesats graduating to interplanetary capabilities, such as the Mars-bound MarCO spacecraft, matching the modest …

Thermal Modelling And Validation Of Heat Profiles In An Rf Plasma Micro-Thruster, Alec Sean Henken

Master's Theses

The need and demand for propulsion devices on nanosatellites has grown over the last decade due to interest in expanding nanosatellite mission abilities, such as attitude control, station-keeping, and collision avoidance. One potential micro-propulsion device suitable for nanosatellites is an electrothermal plasma thruster called Pocket Rocket. Pocket Rocket is a low-power, low-cost propulsion platform specifically designed for use in nanosatellites such as CubeSats. Due to difficulties associated with integrating propulsion devices onto spacecraft such as volume constraints and heat dissipation limitations, a characterization of the heat generation and heat transfer properties of Pocket Rocket is necessary. Several heat-transfer models of …

A Protocol-Based Blended Model For Fluid Mechanics Instruction, John Solomon, Eric Hamilton, Vimal Viswanathan, Chitra Nayak, Firas Akasheh

Faculty Publications, Mechanical Engineering

A personalized and media-rich learning framework called “Knowledge and Curriculum Integration Ecosystem” (KACIE) has been developed and implemented in a junior level fluid mechanics course in Fall 2016 and Spring 2017. This model shares characteristics of blended instruction as well as a flipped classroom, with an overall structure that includes the application of established principles emerging from the learning sciences and from cognitive neuroscience. These principles have taken form in the KACIE model as classroom protocols or written instructions to scaffold and guide teaching and learning by faculty and students respectively. In KACIE, the course has been presented as a …

Development Of A Vortex Particle Code For The Modeling Of Wake Interaction In Distributed Propulsion, Eduardo Alvarez, Andrew Ning

Faculty Publications

Recent developments in electric aircraft technology have enabled the use of distributed propulsion for the next generation of vertical lift vehicles. However, the ability to rapidly assess the performance of these design concepts, with sufficient fidelity, is a current weakness of this nascent industry. This paper explores the capacity of the viscous Vortex Particle Method (VPM) to model wake interactions found in distributed propulsion. The elements of the vortex particle method are summarized, and a new approach for the calculation of vortex stretching through the complex-step derivative approximation is presented. Preliminary validation is performed on vortex ring cases resembling the …

Microfluidic Biosensor With Functionalized Gold Nano Particles On Interdigitated Electrodes, Bharath Babu Nunna

Dissertations

The integration of the microfluidics to the biosensor has growing demand with favorable conditions such as reduced processing time and low reagent consumption. The immuno biosensing with the microfluidic platform helped to make the electrochemical biosensing assays portable due to which this sensing mechanism can be easily implemented in point of care devices. The implementation of the biosensing in the microchannels significantly reduces the sample requirement form milli liter (mL) to micro liter (uL), and thus leads to low volume sample requirement during the sensing. The primary factors contributing to the microfluidic biosensors performance are probe immobilization, specific binding and …

Numerical Assessment Of The Convective Heat Transfer In Rotating Detonation Combustors Using A Reduced-Order Model, James Braun, Jorge Sousa, Guillermo Paniagua

School of Aeronautics and Astronautics Faculty Publications

The pressure gain across a rotating detonation combustor offers an efficiency rise and potential architecture simplification of compact gas turbine engines. However, the combustor walls of the rotating detonation combustor are periodically swept by both detonation and oblique shock waves at several kilohertz, disrupting the boundary layer, resulting in a rather complex convective heat transfer between the fluid and the solid walls. A computationally fast procedure is presented to calculate this extraordinary convective heat flux along the detonation combustor. First, a numerical model combining a two-dimensional method of characteristics approach with a monodimensional reaction model is used to compute the …

Reimagining Icarus: Ethics, Law And Policy Considerations For Commercial Human Spaceflight, Sara M. Langston

Publications

Commercial human spaceflight presents an area for engaging novel human activity and objectives, to include space exploration, entertainment, transportation and extraterrestrial resource acquisition. The inherent dangers and lack of scientific and medical certainty involved however raise interrelated questions of ethics, bioethics, law and public policy. This is particularly the case with spaceflight participant (SFP) screening, selection, and commercial human spaceflight activities where regulations are currently silent or lacking. In the absence of established law, ethics can play an important role by informing industry standards, policies and best practices. Understanding the fundamental ethical values at stake in the application of new …

Development Of Digital Diary For Enhanced Parental School Involvement In Tanzania, Sekione R. Jeremiah, Joel S. Mtebe Phd

The African Journal of Information Systems

The study examined the use of digital diary as a tool for enhancing parental school involvement in Tanzania. The development of the digital diary followed eXtreme Programming agile method where 87 parents and 6 teachers from St. Florence school were involved. Parents and teachers were given six months to use the tool before testing for its effectiveness using data from 7 teachers and 156 parents through semi-structured interviews and questionnaires respectively. The study found that the majority of respondents (84.4% of parents and 96.7% of teachers) indicated that the digital diary was useful tool as enabled them to track children’s …

Thermally Stable Super-Hydrophobic Surface Creation, Caleb Turner

Maseeh Summer Undergraduate Research Experience

Thermally stable super-hydrophobic surface coatings are critical to applications in low gravity fluid dynamics, and in particular Leidenfrost effects. The challenges of manufacturing different super-hydrophobic coatings that are thermally stable, semi-transparent, and environmentally safe at desired operating temperatures is pursued in order to explore the applications of such coatings aboard spacecraft. A catalog of surface coating manufacturing procedures is tabulated with measures for static contact angle, thermal stability, and transparency. These quantities and methods serve as a foundation for both technology applications and follow on experimentation concerning low gravity fluid mechanics at the Portland State Dryden Drop Tower lab.

Fracture Initiation In A Transversely Isotropic Solid: Transient Three Dimensional Analysis, Louis Milton Brock

Mechanical Engineering Faculty Publications

A transversely isotropic solid is at rest, and contains a semi-infinite, plane crack. The axis of rotational material symmetry lies in the crack plane. Application of normal point forces to each face of the crack causes transient 3D growth. The related problem of discontinuities in displacement and traction that exist on regions that exhibit dynamic similarity is first considered. Analytic results are obtained in integral transform space. These lead to equations of the Wiener–Hopf type for the fracture problem. Analytic solutions are again obtained and, upon inversion, subjected to a dynamic energy release rate criterion that includes kinetic energy. A …

Meeting Real World Demands Of The Global Economy: An Employer's Perspective, Doreen Mcgunagle, Laura Zizka

Journal of Aviation/Aerospace Education & Research

Educational programs prepare students theoretically for the workplace, but many programs are still lacking in the real-world skills that the workplace requires. This is especially evident in Science, Technology, Engineering, and Math (STEM) education where today’s graduates hold a fundamental role in advancing science, medicine, sustainability, national security, and the economy, yet the programs to prepare them are falling short of employer expectations. At present, there is a lack of information on the necessary skills for workplace success that is specific to Airline, Aerospace, Defense (A&D) and related Industries’ STEM graduates. This paper attempts to fill this gap by offering …

Space Operations In The Suborbital Space Flight Simulator And Mission Control Center: Lessons Learned With Xcor Lynx, Pedro Llanos, Christopher Nguyen, David Williams, Kim O. Chambers, Erik Seedhouse, Robert Davidson

Journal of Aviation/Aerospace Education & Research

This study was conducted to better understand the performance of the XCOR Lynx vehicle. Because the Lynx development was halted, the best knowledge of vehicle dynamics can only be found through simulator flights. X-Plane 10 was chosen for its robust applications and accurate portrayal of dynamics on a vehicle in flight. The Suborbital Space Flight Simulator (SSFS) and Mission Control Center (MCC) were brought to the Applied Aviation Sciences department in fall 2015 at Embry-Riddle Aeronautical University, Daytona Beach campus. This academic and research tool is a department asset capable of providing multiple fields of data about suborbital simulated flights. …

Tutorial: Determination Of Thermal Boundary Resistance By Molecular Dynamics Simulations, Zhi Liang, Ming Hu

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Due to the High Surface-To-Volume Ratio of Nanostructured Components in Microelectronics and Other Advanced Devices, the Thermal Resistance at Material Interfaces Can Strongly Affect the overall Thermal Behavior in These Devices. Therefore, the Thermal Boundary Resistance, R, Must Be Taken into Account in the Thermal Analysis of Nanoscale Structures and Devices. This Article is a Tutorial on the Determination of R and the Analysis of Interfacial Thermal Transport Via Molecular Dynamics (MD) Simulations. in Addition to Reviewing the Commonly Used Equilibrium and Non-Equilibrium MD Models for the Determination of R, We Also Discuss Several MD Simulation Methods Which Can Be …

A Microresonator-Based Laser Doppler Velocity Sensor For Interplanetary Atmospheric Re-Entry, Benjamin Wise

Mechanical Engineering Research Theses and Dissertations

In this thesis, a laser velocity sensor concept based on optical microresonators is presented and the application to spacecraft atmospheric entry is explored. The concept is based on the measurement of Doppler shift of back-scattered laser light. Specifically, the Doppler shift is detected by observing the whispering gallery optical modes (WGM) of a dielectric microresonator excited by the back scattered light from particulates and gas molecules. The microresonator replaces the typical Fabry-Perot interferometer and CCD camera system, thereby significantly reducing the size and weight of the overall detection system. This thesis presents proof-of-concept results for this measurement approach. The Doppler …