Aerospace Engineering Commons^™

An Integrated Approach To Orbital Debris Research And Management, Marshall H. Kaplan

Space Traffic Management Conference

A viable space traffic management program faces a great barrier caused by the ever-increasing number and variety of orbiting objects ranging in size from a few microns to several meters. Although several international agreements to limit the growth rate of orbital debris are in place, the risk of damage and destruction to active satellites is continually rising. The urgency of this situation was highlighted by the 2007 Chinese ASAT test and the collision of Iridium and Cosmos satellites in 2009. Although many debris removal techniques have been posited none have been implemented. Unless a space debris reduction program is undertaken …

Where Is Space? And Why Does That Matter?, Bhavya Lal, Emily Nightingale

Space Traffic Management Conference

Despite decades of debate on the topic, there is no consensus on what, precisely, constitutes the boundary between airspace and outer space. The topic is mired in legal and political conundrums, and the easy solution to-date has been to not agree on a definition of space. Lack of a definition, some experts claim, has not limited space-based activities, and therefore is not a hurdle that must be overcome. There are increasing calls however in light of increasing (and expectations of increasing) space traffic, both orbital and sub-orbital. This paper summarizes the proposed delimitation of space, the current debate on whether …

Faa Letter In Response To White House Letter Regarding Faa Changes To Air Traffic Control Specialist Hiring Process, Tim Brady, Gregory Mcguirk

Publications

On July 18, 2014, you submitted a letter to President Obama regarding the Federal Aviation Administration's (FAA) recent changes to the Air Traffic Control Specialist (ATCS) hiring process. You expressed concern with the FAA's decision to implement a single all sources hiring strategy and, as a result, you feel that it has disadvantaged graduates who successfully completed the Air Traffic Collegiate Training Initiative (AT-CTI) program, such as xxx. You also expressed concern with the implementation of the Biographical Assessment. Your letter was forwarded by the White House to our agency to address your concerns.

Aerodynamic Optimization Of Box Wing – A Case Study, Adeel Khalid, Parth Kumar

International Journal of Aviation, Aeronautics, and Aerospace

The optimization of a possible medium range box wing commercial airliner is presented in three stages. Preliminary research is used to determine various parameters for a potential box wing model, and a baseline model is designed in Autodesk Inventor, based upon the cantilever Airbus A330-200, an aircraft of a similar role. The Computational Fluid Dynamics (CFD) software used in this project is Dassault Systèmes SolidWorks, which is validated through comparing the NACA 0009 airfoil lift and drag polars with published results. The first stage of optimization is performed on the airfoil shape, with 8 different designs being tested against the …

Ammonia Measurements And Emissions Estimates From A California, Usa Dairy Using Both Point And Remote Sensors, Kori Moore, Emyrei Young, Cassi Gurell, Michael Wojcik, Randall Martin, Gail Bingham, Richard Pfeiffer, John Prueger, Jerry Hatfield

Space Dynamics Laboratory Publications

Background

• Question: How much does a US open lot dairy contribute to local and regional PM loadings?
• • Primary PM: dust, combustion sources
  • Secondary PM: NH₃, NO_x, SO_x, VOCs
  • Climate, housing, manure management, and other confounding factors
• Emissions measurements are required to help answer this question
• Study Objective:
  • Characterize PM_2.5, PM₁₀, TSP, and gaseous NH₃concentrations, fluxes, and emissions from a commercial dairy using both point and remote sensing techniques
  • Results reported in:
    • Marchant et al. 2011. Estimation of dairy particulate matter emissions from a California dairy …Trans. ASABE …

Manufacturing Of Transparent Composites Using Vacuum Infusion Process, V. G.K. Menta, R. R. Vuppalapati, K. Chandrashekhara, Thomas P. Schuman

Chemistry Faculty Research & Creative Works

A novel optically transparent glass fiber reinforced polymer matrix composite has been developed by infusing a clear epoxy resin system of matching refractive index into a conventional E-glass fabric preform. Transparent composites are manufactured using a low cost, environmentally friendly vacuum infusion process. Physical and mechanical tests have been conducted. Transparent composites manufactured using the modified vacuum infusion process had a fiber volume fraction of 40%. Tensile strength and tensile modulus of these composites were 374.9 MPa and 31.74 GPa respectively. The results indicate that the transparent composites possess good physical and mechanical properties. These transparent composites form a good …

Study Of Energy Recovery And Power Generation From Alternative Energy Source, Abdulhakim Amer A. Agll, Yousif M. Hamad, Tarek A. Hamad, John W. Sheffield

Mechanical and Aerospace Engineering Faculty Research & Creative Works

The energy requirement pattern of world is growing up and developing technology. The available sources, while exhausting and not friendly to the environment, are highly used. Looking at partial supply and different options of environment problems associated with usage, renewable energy sources are getting attention. MSW (Municipal solid waste) composition data had been collected from 1997 to 2009, in Benghazi Libya, to evaluate the waste enthalpy. An incinerator with capacity of 47,250 kg/h was confirmed to burn all the quantity of waste generated by the city through the next 15 years. Initial study was performed to investigate energy flow and …

Solid Waste As Renewable Source Of Energy: Current And Future Possibility In Libya, Tarek A. Hamad, Abdulhakim A. Agll, Yousif M. Hamad, John W. Sheffield

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Solid waste holds the greatest potential as biomass source in Libya. The rapid expansion of industry has led to increased urbanization and growing population. These factors have dramatically increased the amount of MSW (municipal solid waste) generated in Libya. However, issues related to environmentally sound MSW management - including waste decrease and clearance - have not been addressed sufficiently. This study presents an overview on solid waste that can be used as a source of bioenergy in Libya including MSW, ISW (industrial solid waste), and HSW (health care wastes) as biomass sources. The management of solid waste and valorization is …

A Cfd Investigation Of The Hydrodynamic Characteristics Of Fluid Flow Through An Impeller And Multi-Objective Design Optimization Of A Centrifugal Pump, Mohammed Khammat Sagban

Doctoral Dissertations and Master's Theses

In this thesis, the first part is conducting an investigation of the hydrodynamic characteristics (pressure and velocity) of fluid flow (water) through an impeller of a centrifugal pump. To illustrate a one-dimensional model is used to identify an impeller of a GDM 10 x 12 HD centrifugal pump using Vista CPD design and BladeGen tool. A three-dimensional model is then built with a commercial software package ANSYS Blade Modeler. The structured mesh of the impeller blade is obtained by using TurboGrid system. The volute of the centrifugal pump is built in ANSYS geometry, and an unstructured mesh is accomplished by …

A Continuous/Discontinuous Fe Method For The 3d Incompressible Flow Equations, Nikolaos Kyriazis

Doctoral Dissertations and Master's Theses

A projection scheme for the numerical solution of the incompressible Navier-Strokes equation is presented. Finite element discontinuous Galerkin (dG) discretization for the velocity in the momentum equations is employed. The incompressibility constraint is enforced by numerically solving the Poisson equation for pressure using a continuous Galerkin (cG) discretization. The main advantage of the method is that is does not require the velocity and pressure approximation spaces to satisfy the usual inf-sup condition, thus equal order finite element approximations for both velocity and pressure can be used. Furthermore, by using cG discretization for the Poisson equation, no auxiliary equations are needed …

Space Separatism: Degree Of Differentiation, Luke R. Stover, Alan A. Johnson

Faculty Publications

Space is so important that the DOD recognizes it as one of five domains in which US forces operate (the other four are land, sea, air, and information). In 2001 Secretary of Defense Donald Rumsfeld designated the Department of the Air Force (DAF) the “Executive Agent for Space for the DOD.” Given the national importance of space activities, the formation of a separate space force has been a topic of persistent discussion in academic and doctrinal circles ever since the United States first entered the space age. Proponents of a separate force argue that because space is an inherently unique …

To Study The Effect Of Catalyst On The Physical Parameters Of Carbon Spheres, Tejas Shailesh Mehta

Doctoral Dissertations and Master's Theses

The discovery of fullerenes has opened up modern studies in carbon materials. Carbon nanoparticles have a large surface area and demonstrate good conductivity. Their unique properties has gained attention in many areas such as water filtration, hydrogen storage and battery electrodes. In this research, carbon spheres with high specific area and uniformity were grown using the Chemical Vapor Deposition (CVD) process with silicon substrates, ethylene (C2H4) as a carbon precursor and argon as the inert gas. We observe that the morphology of carbon spheres largely depend on the experimental conditions, including CVD time duration, temperature, catalyst and flow of gases. …

Exploration Of A Computational Fluid Dynamics Integrated Design Methodology For Potential Application To A Wind Turbine Blade, Gaurav Kapoor

Doctoral Dissertations and Master's Theses

The main purpose of this thesis is to conduct a parametric sensitivity study on the blade design of AOC 15/50 wind turbine based on a CFD approach and optimize the blade design for maximizing the power output. The ANSYS® Fluent® flow solver using the k-ω SST turbulence model was validated by simulating the flow over two dimensional airfoils comprising the AOC 15/50 wind turbine blade. The CFD results have shown a considerable agreement with the experimental data for the airfoils. Parametric correlation study and sensitivity analysis were conducted by performing actual flow simulations over the turbine blade using ANSYS® Fluent®. …

Understanding Orbits: Chapters 4-9, Robert J. Twiggs

Robert "Bob" Twiggs STEM Education Collection

A PowerPoint Presentation created by Professor Bob Twiggs titled "Understanding Orbits: Chapters 4-9" from October 30, 2014.

Flow Induced Vibration On Piezoelectric Structures: Prediction, Experiment And Applications, Felix Ewere

Von Braun Symposium Student Posters

No abstract provided.

Design Of A Thrust Stand To Introduce Propulsion Concepts In The Classroom, Ethan Hopping

Von Braun Symposium Student Posters

No abstract provided.

Nuclear Thermal Propulsion, Adam Dziubanek

Von Braun Symposium Student Posters

No abstract provided.

Optimization Of An Integrated Uav Imaging System For Agricultural Applications, Nishanth Goli

Von Braun Symposium Student Posters

No abstract provided.

The Effect Of Jet Breakup Length On The Acoustic Coupling Of Like-Doublet Injectors, Brian Sweeney

Von Braun Symposium Student Posters

No abstract provided.

Dynamic Simulation Of Aerial Trolley Alternative To The Mighty Eagle, Jerry Sweafford

Von Braun Symposium Student Posters

No abstract provided.

Measuring Burning Rate Of Solid Rocket Propellant Using X-Ray Radioscopy, Matthew Denny

Von Braun Symposium Student Posters

No abstract provided.

Utilizing Springs To Deploy A Forward Drag Device For The Cansat Competition, Evan Tingley, Evan Unruh

Von Braun Symposium Student Posters

No abstract provided.

Design Of A 3-D Printed Unified Hybrid Motor, Matthew A. Hitt, Michael D. Mascaro

Von Braun Symposium Student Posters

No abstract provided.

Control Of A Fuel Cell Based Autonomous Electric Power System For An Aerospace Vehicle, Roshini S. Ashok

Von Braun Symposium Student Posters

No abstract provided.

Development Of An Optically-Actuated Carbon Nanotube (Cnt) Laminated Composite, John Alcorn

Von Braun Symposium Student Posters

No abstract provided.

High Powered Composite Payload Fairing Rocket For Deployable Robotics, Markus Murdy

Von Braun Symposium Student Posters

No abstract provided.

Spacebird: Promoting Space Exploration Through Space Tourism, Eléonore Fontanges

Von Braun Symposium Student Posters

No abstract provided.

Small Motor Testing For Determining The Burning Rate Of Solid Propellant, Daniel A. Jones

Von Braun Symposium Student Posters

No abstract provided.

The One Month Project As A Training Tool Of The Space Hardware Club, Nathanial Long

Von Braun Symposium Student Posters

No abstract provided.

Cognitively Tailored Interfaces (Ctis) For Unmanned Aerial Vehicles (Uavs), Anna Parker Strickland

Von Braun Symposium Student Posters

No abstract provided.