Open Access. Powered by Scholars. Published by Universities.®

Aerospace Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

Theses and Dissertations

Discipline
Institution
Keyword
Publication Year

Articles 1621 - 1650 of 1780

Full-Text Articles in Aerospace Engineering

Exploring Qdes As A Tool For Determining Limits Of Achievable Performance In Aircraft Design, Mark F. Reidinger Dec 1993

Exploring Qdes As A Tool For Determining Limits Of Achievable Performance In Aircraft Design, Mark F. Reidinger

Theses and Dissertations

This thesis explores the usefulness of a computer aided control design software package called QDES in determining the limits of achievable aircraft performance as it relates to controller capability. Modern aircraft, particularly fighters, are being designed to be statically unstable to enhance their maneuverability and performance. It is possible that the aircraft, although physically capable of a certain level of performance due to its engine/ airframe combination, may be uncontrollable up to this level. This study sought to develop a methodology to use QDES to make a preliminary analysis of an aircraft design to determine if there exists a controller …

Go to article

Effects Of Crenulations On Three Dimensional Losses In A Linear Compressor Cascade, William L. Spacy Ii Dec 1993

Effects Of Crenulations On Three Dimensional Losses In A Linear Compressor Cascade, William L. Spacy Ii

Theses and Dissertations

An experimental investigation into the effect of compressor blade trailing edge geometry on three-dimensional flows in a linear cascade was conducted at the AFIT linear cascade test facility. Hot-wire/hot-film anemometry along with total pressure instrumentation was used to analyze crenulation generated vortices and their interaction with the three-dimensional flows in the cascade. The effects of this interaction on the performance parameters associated with the cascade were quantified. The results-indicate that wake mixing is better for crenulated trailing edges and that the precise geometry of the crenulations is critical to performance. One crenulation geometry was found to increase wake mixing while …

Go to article

Optimal Control Design Advantages Utilizing Two-Degree-Of-Freedom Controllers, Michael J. Stephens Dec 1993

Optimal Control Design Advantages Utilizing Two-Degree-Of-Freedom Controllers, Michael J. Stephens

Theses and Dissertations

The purpose of this study was to investigate and describe the differences between a one-degree-of-freedom (1-DOF) controller, in which a controller is placed in a single location in the control loop, and a two-degree- of-freedom (2-DOF) controller, in which two separate controllers are designed -- one in the feedback loop and the other as a prefilter in the forward loop. The approach involved summarizing the major rules governing loop shaping for performance and robustness in the 1-DOF case and then extending the concepts to the 2-DOF case. H2 optimization was utilized to perform several types of SISO examples and …

Go to article

A Numerical Determination Of Bifurcation Points For Low Reynolds Number Conical Flows, Larry K. Waters Dec 1993

A Numerical Determination Of Bifurcation Points For Low Reynolds Number Conical Flows, Larry K. Waters

Theses and Dissertations

It has long been established that supersonic flow over axisymmetric conical bodies at high angles of attack tend to develop a side force due to vortical asymmetry. One of the proposed reasons for the asymmetry is a bifurcation point in the solution of the Navier-Stokes equations. This study investigated the possible existence of a bifurcation point in the Navier-Stokes equations for subsonic flow. Newton's method, with gauss elimination, was used- to solve the steady-state, viscous, compressible Navier-Stokes equations in spherical coordinates assuming conical similarity.

Go to article

A Virtual Environment For Satellite Modeling And Orbital Analysis In A Distributed Interactive Simulation, Andrea A. Kunz Dec 1993

A Virtual Environment For Satellite Modeling And Orbital Analysis In A Distributed Interactive Simulation, Andrea A. Kunz

Theses and Dissertations

In response to the need for a more realistic, interactive, and immersive space simulation system, the Joint National Intelligence Defense Staff JNIDS has sponsored the development of the Satellite Modeler at the Air Force Institute of Technology AFIT. The Satellite Modeler SM is a virtual environment VE application that allows analyst-users to enter a virtual near- Earth space environment and visualize realistic satellite models performing accurate orbital motion. The Satellite Modeler provides manipulation functions that allow a user to interact with multiple satellite models and satellite constellations. The system affords the user multiple vantage points within the environment to view …

Go to article

Dynamic Response Of A Compressor Research Facility, Janet W. Grondin Dec 1993

Dynamic Response Of A Compressor Research Facility, Janet W. Grondin

Theses and Dissertations

The response of the Wright Laboratory Compressor Research Facility to a small amplitude, acoustic, sinusoidal disturbance was investigated. The fluid transmission line equations for laminar, one-dimensional flow in a circular duct were solved and verified through a laboratory experiment using a scale model of the facility. The resonant frequencies of the facility were determined for a variety of flow conditions. Techniques for analytically modeling end impedance and flow straightening elements were also studied. The fundamental frequency of the facility was determined to be between 5.5 and 6.5 Hz depending on the flow conditions and geometry configurations specified.

Go to article

Rendering Of Three-Dimensional Data Sets Derived From Finite-Difference And Spectral Methods, Paul A. Schubert Dec 1993

Rendering Of Three-Dimensional Data Sets Derived From Finite-Difference And Spectral Methods, Paul A. Schubert

Theses and Dissertations

The timely visualization of three-dimensional data sets and the advantages of using a spectral method solution versus a finite-difference method solution in rendering isosurfaces is described. The Beam-Warming numerical algorithm, which uses implicit-approximate-factorization, is used to generate the steady-state solutions for a model diffusion-convection problem. The Chebyshev collocation operator is used to evaluate the right-hand side of the Beam-Warming algorithm for the spectral solution. Comparing the model problem results with the exact solution, the spectral series solution is truncated to the same degree of accuracy as the finite-difference for comparison of rendering times. The rendering algorithm employs octrees to efficiently …

Go to article

Crew Scheduling Of Space Operations Squadrons (Sops), Marianne Idzi Nov 1993

Crew Scheduling Of Space Operations Squadrons (Sops), Marianne Idzi

Theses and Dissertations

The mission of Space Operations Squadrons is continuous support of military satellite systems. The scheduling problem associated with conducting continuous operations is threefold. The first problem is finding cyclical crew shift schedules that meet daily manning requirements, adhere to current regulations, contain a minimum number of workshift changes during consecutive duty days, and maximize the non-duty time allowed between duty shifts. The second problem is to establish a sea of criteria to evaluate alternative shift schedules. Finally, the third problem is to minimize the number of personnel required to meet the scheduling requirements stated in the first problem. This study …

Go to article

An Investigation Of Integrated Product Development Teams Of The F-22 Program, Gary F. Wagner, Randall L. White Sep 1993

An Investigation Of Integrated Product Development Teams Of The F-22 Program, Gary F. Wagner, Randall L. White

Theses and Dissertations

This study investigated Integrated Product Development (IPD) at the F-22 System Program Office (SPO). A literature review revealed the key IPD characteristics of organizational structure, communication, intense up-front planning, training, integrated management tools, and lessons learned. The research method was twenty-two personal interviews of SPO subjects selected from four IPD teams, the front office, and functional support divisions. Key findings included an emphasis on up-front planning to establish an organizational and contractual structure which empowered workers to develop their products. Also, constant communication with all other functions and teams was stressed while training was primarily done while transitioning to IPD. …

Go to article

Experimental And Analytical Analysis Of The Response Of A Smart Beam To Rate Feedback, Terance J. Hoffman Jun 1993

Experimental And Analytical Analysis Of The Response Of A Smart Beam To Rate Feedback, Terance J. Hoffman

Theses and Dissertations

A smart beam with embedded sensors and actuators was analyzed and tested. The smart beam studied was constructed from graphite and epoxy with piezoceramic actuators and NiTiNOL sensors embedded. It was mounted vertically and subjected to transverse dynamic loading at the free end. Analytic expressions for the open loop and closed loop response (using strain rate feedback control) of the beam (including internal damping) to external forcing were derived in detail. Experimental testing of the beam verified the accuracy of the predicted open loop response.

Go to article

A Comparison Of Computational And Experimental Data For A Subscale High Speed Propulsive Nozzle At Low Mach Numbers, Yonghee Hyun Jun 1993

A Comparison Of Computational And Experimental Data For A Subscale High Speed Propulsive Nozzle At Low Mach Numbers, Yonghee Hyun

Theses and Dissertations

This computational study of a hypersonic sub-scale nozzle/cowl configuration compares numerical solutions with experimental data for nozzle performance at off design conditions (subsonic through supersonic Mach numbers. A combination of Van Leer and Roe flux-splitting algorithms was used to solve the flow field. The explicit formulation assumed laminar planar flow and the perfect gas equation of state. A validation for the numerical algorithm was accomplished by comparing with experimental data for a variety of cases. Grid refinement, geometry, and operating conditions all influenced the comparison of the experimental and computational data. Generally, as the Mach number and nozzle pressure ratio …

Go to article

Development Of An Air-To-Air Refueling Automatic Flight Control System Using Quantitative Feedback Theory, Dennis W. Trosen Jun 1993

Development Of An Air-To-Air Refueling Automatic Flight Control System Using Quantitative Feedback Theory, Dennis W. Trosen

Theses and Dissertations

Quantitative Feedback Theory and the improved method Quantitative Feedback Theory are enhanced to include the rejection of disturbance at the system output. The enhanced Quantitative Feedback Theory and improved method Quantitative Feedback Theory processes are applied to the design of an automatic flight control system to regulate position of the C-135B fuel receiving aircraft relative to the tanker during air-to-air refueling. A simple feedback control system is developed that will achieve stable position regulation. State-space aircraft models &re generated. An inner loop autopilot is designed to reduce the plant cutoff frequency and provide the system inputs for the Quantitative Feedback …

Go to article

Hoph Bifurcation In Viscous, Low Speed Flows About An Airfoil With Structural Coupling, Mark J. Lutton Mar 1993

Hoph Bifurcation In Viscous, Low Speed Flows About An Airfoil With Structural Coupling, Mark J. Lutton

Theses and Dissertations

The locations of Hopf bifurcation points associated with the viscous, incompressible flow about a NACA 0012 airfoil with structural coupling are computed for very low Reynolds numbers (<2000). A semi-implicit, first-order-accurate time integration algorithm is employed to solve the stream function-vorticity form of the Navier-Stokes equations. The formulation models the inclusion of simple structural elements affixed to the airfoil and captures the resulting airfoil motion. The equations describing the airfoil motion are integrated in time using a fourth-order Runge-Kutta algorithm. The dissertation is divided into two parts. In part one, numerical experiments are performed in the laminar regime to determine if the structural model of the airfoil has an effect upon the location of the Hopf bifurcation point when compared with the fixed airfoil. Results are reported for a variety of structural characteristics, including variations of torsional and linear spring constants, inertial properties, structural coupling, and structural damping. The structure of the solution space is explored by means of phase plots. In part two, the Baldwin-Lomax turbulence model is implemented to model turbulent flow. A numerical effort is made to predict the onset of unsteady flow.

Go to article

Effect Of Transverse Vibration On The Capillary Limit Of A Wrapped Screen Wick Copper/Water Heat Pipe, Mark C. Charlton Dec 1992

Effect Of Transverse Vibration On The Capillary Limit Of A Wrapped Screen Wick Copper/Water Heat Pipe, Mark C. Charlton

Theses and Dissertations

The effect of transverse vibration on the capillary limit of a copper/water heat pipe with a tightly wrapped screen wick was investigated. The capillary limit was measured over a range of operating temperatures under static conditions. A bench-top shaker was used to provide vibration normal to the longitudinal axis of the pipe, and the capillary limit was measured at vibration frequencies of 30, 250, and 1000 Hz. At each of these frequencies, tests were run at vibration levels of 1.0, 2.5, and 5.0 G. The pipe was maintained at a zero degree inclination angle and power throughput was increased until …

Go to article

An Experimental Determination Of The Effects Of Blending Collocated And Non-Collocated Sensor Measurements To Control A Flexible Structure, Richard G. Cobb Dec 1992

An Experimental Determination Of The Effects Of Blending Collocated And Non-Collocated Sensor Measurements To Control A Flexible Structure, Richard G. Cobb

Theses and Dissertations

An experimental investigation was performed controlling a cantilevered beam in bending using proportional feedback on a blend of collocated and non-collocated sensor measurements using a single actuator. Exact transfer functions between the control input and the measurements were developed and compared to the finite element method. By analyzing the open loop pole-zero locations as a function of the measurement blending, insight into the closed loop behavior is obtained. Minimum phase behavior can be maintained for a range of the blending ratio. Results using blended control were compared to both proportional collocated feedback and compensated collocated feedback using LQG methods. The …

Go to article

Extended Lyapunov Exponents For Second Order Systems, Janice M. Horn Dec 1992

Extended Lyapunov Exponents For Second Order Systems, Janice M. Horn

Theses and Dissertations

It is shown that the concept of the Lyapunov exponent can be extended to include an imaginary part. A numerical technique used to calculate these extended Lyapunov exponents for second order systems is presented. There are two requirements to make this extension possible: the definition of a coordinate frame on the tangent space of the differential equation, and an extension of the classical limit, called the limit of the mean. An application of the technique to the van der Pol equation for the constant coefficient and periodic coefficient cases is given. The extended Lyapunov exponents found using this technique totally …

Go to article

An Approximate Solution For The Linearized Spinup Dynamics Of A Dual-Spin Spacecraft, David L. Kinney Dec 1992

An Approximate Solution For The Linearized Spinup Dynamics Of A Dual-Spin Spacecraft, David L. Kinney

Theses and Dissertations

An approximate solution is obtained for the linearized equations of motion for the spinup dynamics of a dual-spin spacecraft. The approximation is obtained from the WKB (Wentzel, Kramers, and Brillouin) method, which usually generates a divergent series. Comparison between the WKB solution and the numerically integrated solution are used to study the effects of spinup torque magnitude and the number of WKB terms used on the accuracy of the approximation. The WKB method generates accurate approximations for small spinup torques using as few as two terms in the series when no singularities are present in the WKB terms during the …

Go to article

An Electromagnetically-Controlled Precision Orbital Tracking Vehicle (Potv), Richard E. Lawrence Jr. Dec 1992

An Electromagnetically-Controlled Precision Orbital Tracking Vehicle (Potv), Richard E. Lawrence Jr.

Theses and Dissertations

A propulsion configuration it defined for a precision orbital tracking vehicle (POTV) that employs electrodynamic forces to control vehicle attitude and position with respect to another spacecraft. A pair of electrically powered thrusters assist the POTV in position control. The vehicle can maintain continuous standoff at close range from another spacecraft in any direction, has docking capability, and has gross orbital transfer capability. These capabilities and the specific design derived for the POTV have been defined by the requirements of a postulated space facility (ASSET) that salvages structural aluminum from the external fuel tank of the space shuttle. Precision control …

Go to article

Canonical Floquet Perturbation Theory, David J. Pohlen Dec 1992

Canonical Floquet Perturbation Theory, David J. Pohlen

Theses and Dissertations

Classical Floquet theory is examined in order to generate a canonical transformation to modal variables for periodic system This transformation is considered canonical if the periodic matrix of eigenvectors is symplectic at the initial time. Approaches for symplectic normalization of the eigenvectors had to be examined for each of the different Poincare eigenvalue cases. Particular attention was required in the degenerate case, which depended on the solution of a generalized eigenvector. Transformation techniques to ensure real modal variables and real periodic eigenvectors were also needed. Periodic trajectories in the restricted three-body case were then evaluated using the canonical Floquet solution. …

Go to article

Passive Damping Of A Solar Array, Mark A. Scharpen Dec 1992

Passive Damping Of A Solar Array, Mark A. Scharpen

Theses and Dissertations

This study was an attempt to conceptualize, design, build, and test a constrained layer damping device that uses mechanical advantage for the purpose of increasing the damping of transient vibration of a five-bay planar truss. The aluminum truss was clamped to a fixed support and simulated a solar array. A conventional constrained layer treatment was designed, built, and tested to serve as a benchmark for comparison. For the conventional treatment, Plunkett and Lee's segmented constraining layer technique was used. The improved device, two three-layer sandwich beams spanning the two bays nearest the built-in end, were supported several inches away from …

Go to article

Data Reduction With Least Squares Differential Correction Using Equinoctial Elements, Michael S. Wasson Dec 1992

Data Reduction With Least Squares Differential Correction Using Equinoctial Elements, Michael S. Wasson

Theses and Dissertations

This study investigates earth satellite orbit estimation on a track of range, azimuth, and elevation data from a single tracking station. The estimation routine is a least squares batch filter based solely on two-body orbital motion. Using equinoctial elements for the reference orbit avoids the numerical difficulties of the classical elements at eccentricities near zero and inclinations near zero or 90 degrees. Orbits for Mir, DMSP, Explorer, Cosmos, and GPS are investigated. The goal of this study is to reduce orbit information from observations (range, azimuth, and elevation) to an element set and a covariance matrix without considering perturbation effects. …

Go to article

Strategies For Optimal Control Design Of Normal Acceleration Command Following On The F-16, James C. Baird Dec 1992

Strategies For Optimal Control Design Of Normal Acceleration Command Following On The F-16, James C. Baird

Theses and Dissertations

Weight shapes and locations are investigated for H2, H∞, and the general mixed H2/H infinity optimization methodologies. The design model is normal acceleration command following for the F-16 (SISO) at Mach 0.6 and Sea Level, which yields a nonminimum phase and unstable plant. H2 design types include LQG, LQG/Sensitivity, and LQG/Tracking. Robustness and tracking are the objectives of the central H infinity process. Both H∞ optimal and suboptimal controllers are examined, with the suboptimal controller shown as the practical choice for this plant. The mixed H2/H∞ setup allows the tradeoff between …

Go to article

Nozzle/Cowl Optimization For A Hypersonic Vehicle On A Typical Trajectory, Michael J. Bonaparte Dec 1992

Nozzle/Cowl Optimization For A Hypersonic Vehicle On A Typical Trajectory, Michael J. Bonaparte

Theses and Dissertations

An investigation of the effects of simultaneous variation of the nozzle attachment and cowl deflection angle on the performance of a two- dimensional nozzle used on a hypersonic vehicle such as the National Aero-Space Plane (NASP) was performed using a two parameter optimization procedure. Total thrust optimization was accomplished using a Flux-Difference-Split (FDS) cods, a RAMJET Performance Analysis program, and an oblique shock wave solver program, at sixteen points on a 1000 psf dynamic pressure trajectory for Mach numbers from 10.0 to 25.0. A single parameter optimization of the total thrust using a variable nozzle attachment angle was accomplished first …

Go to article

Characterization Of Stall Inception In High-Speed Single-Stage Compressors, Keith M. Boyer Dec 1992

Characterization Of Stall Inception In High-Speed Single-Stage Compressors, Keith M. Boyer

Theses and Dissertations

Two single-stage, transonic compressor designs were tested under various undistorted operating conditions to characterize the process leading up to aerodynamic stall. The rig case was instrumented with eight high-response static pressure transducers equally spaced around the annulus for stall development detection. High-response measurements were low-pass filtered and both spatially and temporally analyzed using discrete Fourier techniques. At all speeds tested for both designs, stall inception was characterized by growth of a small amplitude' rotating wave. The waves did not grow significantly until just prior to the instability, when exponential growth into fully-developed rotating stall occurred very rapidly, within 6-10 rotor …

Go to article

The Non-Linear Dynamics Of Composite Cylindrical Shells, James M. Greer Jr. Dec 1992

The Non-Linear Dynamics Of Composite Cylindrical Shells, James M. Greer Jr.

Theses and Dissertations

The non-linear dynamic behavior of suddenly loaded composite shells is the subject of this research. The objective of research is two-fold: (1) to characterize the apparently random physical behavior sometimes observed in the finite element analysis as either numerical instability, chaotic behavior, or both; and (2) to develop criteria for choosing time steps for the finite element model, referred to as DSHELL. This displacement based finite element code is capable of dynamic analysis of plates, arches, and cylindrical shells undergoing large displacements and moderately large rotations during deformation. DSHELL uses a 36-DOF isoparametric shell element to obtain numerical results. A …

Go to article

Experimental Investigation Of The Aerodynamics Of Independently Rotating Cylindrical Shells, Walter C. Howerton Dec 1992

Experimental Investigation Of The Aerodynamics Of Independently Rotating Cylindrical Shells, Walter C. Howerton

Theses and Dissertations

The purpose of this thesis was to investigate experimentally the aerodynamic forces on two adjacent, independently rotating cylinders in a cross- flow. This investigation involved a force measurement setup which had the two cylinders mounted on a common support shaft, extending beyond the span of the wind tunnel test section, and supported by spoke rings with strain gages in the vertical and horizontal directions. This setup proved capable of measuring aerodynamic forces. The lift on the independently rotating cylinders was found to increase as one cylinder's angular speed increased while the other's remained constant, and decrease as the relative angular …

Go to article

Improvements To Lqgi/Ltr Methodology For Plants With Lightly Damped Or Low Frequency Poles, An-Chi Ju Dec 1992

Improvements To Lqgi/Ltr Methodology For Plants With Lightly Damped Or Low Frequency Poles, An-Chi Ju

Theses and Dissertations

LQG/LTR design has a tendency to invert the plant's dynamics, which is undesirable if there are plant poles near the imaginary axis. In this study, Static Output Feedback (SOF) is applied to reassign plant poles before LQG/LTR is applied. Alternatively, Robust Eigenstructure Assignment (REA) was used to design the target loop transfer function with an ideal eigenstructure to avoid the undesirable cancellations. Both methods were applied to several aircraft design problems. Results showed that the methods can be effectively used so that the LQG/LTR design has improved stability and performance; however, it was found that each method had strengths and …

Go to article

Development Of An Engine/Airframe Performance Matching Scheme For Jet Engine Retrofit, Alan Lach Dec 1992

Development Of An Engine/Airframe Performance Matching Scheme For Jet Engine Retrofit, Alan Lach

Theses and Dissertations

This investigation developed a procedure and new analysis tools for identifying retrofit engine designs for use in existing airframes. The goal was to find a replacement engine for the air-to-air fighter, AAF, developed in the textbook Aircraft Engine Design. This paper introduced the ideas of solution surfaces, constraint/thrust diagrams, quality measures and linear regression analysis for the engine design problem. It considered the application of the jet engine design software ACSYS, MISS, and ONX along with statistical analysis software, SAS. Modeling techniques and linear regression analysis were used to minimize iteration while searching a wide range of design variables. Improvements …

Go to article

Vibration Suppression In Large Flexible Space Structures Using Active Control Techniques, Chad T. Matheson Dec 1992

Vibration Suppression In Large Flexible Space Structures Using Active Control Techniques, Chad T. Matheson

Theses and Dissertations

This report investigates the use of active vibration control techniques applied to the PACOSS Dynamic Test Article as an experimental structure. In the course of the research, a mathematical model of the lightly damped experimental structure was created based on experimental data. This model was used in the design of two classes of controllers. The first class is pure rate feedback of the structure's measured states such that global stability is insured. The second type of controller investigated was an optimal controller (LQG) that was created using the truncated mathematical model. The rate feedback controller showed significant improvements in the …

Go to article

The Influence Of Structural Optimization On The Aeroelastic Properties Of A Vertical Tail, David G. Miller Dec 1992

The Influence Of Structural Optimization On The Aeroelastic Properties Of A Vertical Tail, David G. Miller

Theses and Dissertations

The purpose of this thesis is to investigate the influence of structural optimization parameters on the structural and aeroelastic behavior of a vertical tail. The outside geometry of the tail is assumed fixed. The objective of the optimization is to reduce the structural member sizes so that the overall weight of the tail is minimized. The influence that design loads, design constraints, design variable linking has on the optimal design is observed examining several design cases. The static aeroelastic properties a flutter speeds of the various design cases are then compared. The doublet lattice method is used to calculate the …

Go to article

First Prev Next Last