Aerospace Engineering Commons^™

Computational Analysis Of A Wing Oscillator, Ryne Derrick Radermacher

Masters Theses

An analysis of a newly proposed wind power extraction device called a wing oscillator was performed using computational fluid dynamics (CFD). A wing oscillator is a device that consists of two airfoils attached to a central pivot by means of a frame or shaft. Oscillatory motion is produced by controlling the angle of attack of the airfoils as a fluid flow is passed over the device. A robust mathematical scheme was developed to investigate the performance of the wing oscillator and was hooked to the CFD software package FLUENT through User Defined Functions (UDFs). Using the dynamic meshing analysis methods …

Operation Of The Aerodynamic Plasma Actuator At High Altitude, Timothy Glen Nichols

Masters Theses

"A plasma actuator was operated at altitudes from 0 to 18288 meters to determine the mechanisms leading to decreased force production at low pressures. The actuator was driven with a 5 kHz sine wave and a peak to peak voltage of 13.4 kV at pressures of 760, 429, 321, 226, and 88 Torr. A passive measurement technique called the capacitive V-dot probe was adapted to the actuator in order to resolve the spatiotemporal evolution of the surface potential and electric field on the dielectric surface. At low pressures up to 20 times more plasma is present than at atmospheric conditions. …

A Study Of The Integration Of An Inlet Noise Radiation Code With The Aircraft Noise Prediction Program, Devin Kyle Boyle

Masters Theses

"A numerical method has been developed in order to study the effect of turbofan inlet acoustic treatment on the resulting cumulative noise heard by observers on the ground. The approach to creating the tool was to combine the capabilities of the NASA-developed Aircraft Noise Prediction Program (ANOPP) with the fan noise propagation and radiation code developed at Missouri University of Science and Technology. ANOPP can be used to predict the noise metrics resulting from a typical commercial aircraft with turbofan engines on several different flight profiles, including takeoff, approach/landing and a steady (constant altitude/airspeed) flyover. These capabilities are valuable for …

Analysis Of Optimal Control Derivations For Aerial Defense, Andrew John Friedrichs

Masters Theses

"Optimal control will be used to derive four guidance laws for the purpose of defending an aircraft from incoming missiles. The dynamics of the defending missile, and the overall engagement are used in these derivations. They are evaluated first in two degrees of freedom, then in six degrees. The guidance objective is to move a defending missile between the aircraft and the attacker. Optimal control is used to derive different commanded accelerations. Utilizing small changes in the cost functions, four applications will be derived. Triangle Guidance is used for inspiration, and initially a direct approach is attempted. In the course …

Studies Of Inductive Plasmas And Their Application To Theta-Pinch Devices Via Numerical Modeling, Warner C. Meeks

Masters Theses

"First, a globally-averaged RF plasma model is used to investigate exit conditions immediately following a RF pre-ionization stage. Analysis shows that reducing pulse duration from 10⁻⁶ to 10⁻⁷ seconds increases peak ion energy fraction by 17% (from 16 to 33%) and doubles final conductivity. Pulse waveforms are square in nature, and ion energy fraction is defined in this work as the percentage of total input energy entrained in ions. Increasing total energy deposition from 5 to 160 mJ increases ion energy fraction from 33% to 58% at a 200 ns pulse duration. This increase is not linear however, showing instead …

Numerical Investigation Of Second-Law Characteristics Of Ramjet Throttling, Jonathan Albert Sheldon

Masters Theses

"A numerical study of a generic axisymmetric ramjet operating at conditions corresponding to flight Mach 3.0 and a standard altitude of 10 km is presented. The study includes both modeling of steady-state flowfields in the ramjet as well as transient throttling maneuvers in which the throttle is decreased or increased from maximum or minimum throttle positions. The results presented here focus on entropy generation and performance characteristics. Combustion-generated exothermic heat release is modeled using simple volumetric energy addition to the flow within a defined heat release zone. The study utilizes two levels of wall boundary modeling, corresponding respectively to inviscid …

Design And Development Of Ionic Liquid Dual-Mode Spacecraft Propellants, Steven P. Berg

Masters Theses

"Energetic ionic liquids capable of dual-mode chemical monopropellant or bipropellant and electric electrospray rocket propulsion are investigated. Following an extensive literature review, ionic liquids [Bmim][dca], [Bmim][NO₃], and [Emim][EtSO₄] are selected for study since their physical properties align well with the current state-of-the-art in chemical and electrospray propellants. Simulations show that these liquids will not be useful for monopropellant propulsion due to the prediction of solid carbon formation in the exhaust and performance 13-23% below that of hydrazine. Considering these ionic liquids as a fuel component in a binary monopropellant mixture with hydroxyl ammonium nitrate shows 1-4% improved specific impulse over …

Numerical Investigation Of Plasma Actuator Configurations For Flow Separation Control At Multiple Angles Of Attack, Thomas Kelsey West Iv

Masters Theses

"The primary objective of the study presented in this thesis was to analyze the effectiveness of aerodynamic plasma actuators as a means of active flow control over a low speed airfoil at multiple angles of attack each corresponding to two different flow separation mechanisms (i.e., laminar separation bubble and turbulent flow separation at stall conditions). Detailed parametric studies based on steady and unsteady Navier-Stokes simulations, modified to include the body force term created by the plasma actuator, were performed for a NACA 0012 airfoil at a chord Reynolds number of 10⁵. In particular, parametric studies were performed to investigate the …

Structural Analysis Of Microsatellites, Yezad H. Anklesaria

Masters Theses

"Satellite design, development, fabrication, testing and entry into service is a complex process. Each step of this process involves intricate steps to achieve the desired objective. This thesis summarizes a study relating to the area of development and testing of microsatellites to support qualification and eventually preparing a spacecraft for spaceflight. Students in the Space Systems Engineering laboratory (SSE Lab) in the Aerospace Engineering Program are in the process of developing a pair of microsatellites for a technology demonstration in space.

After the initial design of the spacecraft is completed in the design phase a significant amount of time is …

Gray Gas Analysis Of Radiative Preheating Effects On Shock Induced Combustion, Pratibha Raghunandan

Masters Theses

"The use of detonations in combustors has been receiving increased attention in recent times. The presence of shock waves in such combustors invariably poses the existence of two domains that present different physics for the flow processes. The variation of upstream temperature due to radiative heating by the products of combustion was given particular attention in the present study. The modeling of heat transfer across a normal shock wave of negligible thickness was done by considering the reactants and the products of combustion to be in radiative equilibrium with each other. The quantification of emissivity of the products of combustion …

Shaker Table Vibration Testing Of A Microsatellite, Tonya Michelle Sanders

Masters Theses

"In the satellite development process, structural testing is a means to gain confidence in analytical models and ultimately support qualification of the spacecraft for flight. Vibration testing, in particular, is motivated by the safety considerations of crew or launch personnel, the survivability of delicate hardware and electronics, and the avoidance of large stresses that cause structural fatigue or failure. The subject of this thesis is concerned with the shaker table vibration testing of a microsatellite pair designed and built by students at the Missouri University of Science and Technology in Rolla, Missouri. A finite element model (FEM) used in structural …

Magnetometer-Only Attitude Determination With Application To The M-Sat Mission, Jason D. Searcy

Masters Theses

"The topic of this thesis focuses on attitude determination for small satellites. The method described uses only a magnetometer to resolve the three-axis attitude of the satellite. The primary challenge is that magnetometers only instantaneously resolve two axes of a satellite's attitude. Typically, magnetometers are used in conjunction with other sensors to resolve all three axes. However, by using a filter over an adequately long orbit arc, the magnetometer data can yield all the information necessary. The magnetic field data are filtered to obtain the magnetic field derivative vector, which are combined with the magnetic field vector to fully resolve …

Design, Analysis, And Optimization Of Composite Structures For Aerospace Applications, Tyler Jason Keil

Masters Theses

"This thesis contains three papers that focus on composites that pertain to a variety of structures commonly found in the aerospace industry. The first paper presents an investigation of the stowage and deployment strength of a thin carbon fiber-reinforced polymer shell capable of being rolled and stowed in a tight rolled configuration. The intent of this structure is for use as a segment of a larger deployable reflective aperture. This study involved finite element analysis of several laminates, coupon-level and full-scale prototype testing, which provided a much needed insight and benchmark of composite shells used in this manner.

The second …

Uncertainty Quantification Integrated To Computational Fluid Dynamic Modeling Of Synthetic Jet Actuators, Srikanth Adya

Masters Theses

"The Point Collocation Non-Intrusive Polynomial Chaos (NIPC) method was applied to a stochastic synthetic jet actuator problem to demonstrate the integration of computationally efficient uncertainty quantification to the high-fidelity CFD modeling of Synthetic Jet Actuators. The uncertainty quantification approach was first implemented in two stochastic model problem cases for the prediction of peak exit plane velocity using a Fluid Dynamic Based analytical model of the Synthetic Jet Actuator, which is computationally less expensive than CFD simulations. The NIPC results were compared with direct Monte Carlo sampling results. To demonstrate the efficient uncertainty quantification in CFD modeling of synthetic jet actuators, …

Hall-Effect Thruster Surface Properties Investigation, David George Zidar

Masters Theses

"Surface properties of Hall-effect thruster channel walls play an important role in the performance and lifetime of the device. Physical models of near-wall effects are beginning to be incorporated into thruster simulations, and these models must account for evolution of channel surface properties due to thruster operation. Results from this study show differences in boron nitride channel surface properties from beginning-of-life and after 100's of hours of operation. Two worn thruster channels of different boron nitride grades are compared with their corresponding pristine and shadow-shielded samples. Pristine HP grade boron nitride surface roughness is 9000±700 Å, while the worn sample …

A Numerical Study Of Novel Drag Reduction Techniques For Blunt Bodies In Hypersonic Flows, Christopher Marley

Masters Theses

"Numerical simulations of a full three-dimensional hemispherical body in hypersonic flow are conducted and innovative techniques involving forward injection of gas from the stagnation point of the sphere are investigated; techniques include annular (ring) and swirled injection both with and without upstream energy deposition. Objectives of the analysis are the assessment of 1) drag reductions achieved on the blunt body (including the detrimental drag effect caused by the forward-facing injection itself) and 2) stability characteristics of the jet. Studies are conducted at free-stream Mach numbers of 10 and 6.5 at standard atmospheric conditions corresponding to 30 km altitude. While centered …

Computational Investigation Of Plasma Actuator As An Active Flow Control Strategy Of Laminar Separation Bubbles, Justin Roger Aholt

Masters Theses

"A parametric computational study designed to examine the plausibility of an external body force generated by active means, such as a plasma actuator, as a means of controlling a Laminar Separation Bubble (LSB) over an airfoil at low Reynolds numbers was conducted. Computational Fluid Dynamics (CFD) was employed to characterize the effect that a body force, localized to a small region tangent to the airfoil surface, might have on an LSB. In this study, the effects of altering the strength and location of the "actuator" on the size and location of the LSB and on the aerodynamic performance of the …

Quantifying Model Uncertainty Using Measurement Uncertainty Standards, Harsheel Rajesh Shah

Masters Theses

"Model uncertainty quantification is mainly concerned with the problem of determining whether the observed data is consistent with the model prediction. In real world, there is always a disagreement between a simulation model prediction and the reality that the model intends to represent. Our increased dependence on computer models emphasizes on model uncertainty which is present due to uncertainties in model parameters, lack of appropriate knowledge, assumptions and simplification of processes. In addition, when models predict multi-variate data, the experimental observation and model predictions are highly correlated. Thus, quantifying the uncertainty has a basic requirement of comparison between observation and …

Heat Transfer Augmentation In Rectangular Ducts Due To Passive Flow Destabilization, James Jackson Tinsley

Masters Theses

"The following thesis documents the comparison of surface enhancements in rectangular ducts for heat transfer enhancement of the air-side of off-road heat exchangers. Two sets of experiments were completed, one utilizing air as the working fluid, and the other utilizing water. Five air geometries and four water geometries were studied, including those with crosswise bumps, longitudinal vortex generators, and a unique rifling geometry. A smooth test section was also tested in the water experiments to verify the experimental setup. Such verification had been performed previously for the air experiments by Rucker [2007]. The experiment involved an applied constant heat flux …

Inherent And Model-Form Uncertainty Analysis For Cfd Simulation Of Synthetic Jet Actuators, Daoru Frank Han

Masters Theses

"A mixed aleatory (inherent) and epistemic (model-form) uncertainty quantification (UQ) analysis method was applied to a computational fluid dynamics (CFD) modeling problem of synthetic jet actuators. A test case, (Case 3, flow over a hump model with synthetic jet actuator control) from the CFDVAL2004 workshop was selected to apply the Second-Order Probability framework implemented with a stochastic response surface obtained from Quadrature-Based Non-Intrusive Polynomial Chaos (NIPC). Three uncertainty sources were considered: (1) epistemic uncertainty in turbulence model, (2) aleatory uncertainty in free stream velocity and (3) aleatory uncertainty in actuation frequency. Uncertainties in both long-time averaged and phase averaged quantities …

Continuous Low Thrust For Small Spacecraft Proximity Operations, James Harris Meub

Masters Theses

"Recently, both DoD and NASA have demonstrated increased interest in the development of close proximity operations for space systems. AFRL's Advanced Sciences and Technology Research Institute for Astrodynamics (ASTRIA) has defined several key research topics relevant to military priorities, with one area of critical importance being the inspection and observation of low Earth orbit resident space objects (RSOs). This study investigates the feasibility of using a low-thrust cold-gas propulsion system to effectively and accurately facilitate resident space object inspection. Specifically, this study focuses on the Missouri S&T Satellite mission (M-SAT) as a means to demonstrate autonomous RSO inspection. This paper …

Management Of A University Satellite Program With Focus On A Refrigerant-Based Propulsion System, Shawn W. Miller

Masters Theses

"The Missouri University of Science and Technology Satellite (M-SAT) design team has established a satellite program to develop a pair of satellites to perform an autonomous formation flight mission. The resulting configuration was assembled for the Air Force Research Lab University Nanosat Program. This document, written by the Program Manager and former member of the Propulsion subsystem, is a description of the management process used by the team to develop a satellite configuration. Included in the document is a discussion of team organization, techniques for managing a program, and lessons learned during the 2007 to 2008 timeframe. The managing techniques …

Analysis Of The Theta-D Filter As Applied To Hit-To-Kill Interceptors And Satellite Orbit Determination, Michael W. Dancer

Masters Theses

"When designing feedback control systems, there is often a need for estimation methods that provide system information that is not readily available via sensors placed within the system. In many cases a sensor that measures a particular system state either does not exist or is prohibitively expensive. In addition, all realistic systems contain some degree of nonlinearity. This thesis focuses on two such cases: missile guidance with bearings-only measurements and GPS satellite orbit determination. In each case, a new nonlinear filter, the [theta]-D method, is used and evaluated for its performance in providing the necessary estimation. To aid the filter …

A Numerical Investigation Of Flowfield Modification In High-Speed Airbreathing Inlets Using Energy Deposition, Matthew Flynn Rohweder

Masters Theses

"Energy deposition in front of dual-mode ram/scramjet engines is numerically investigated utilizing two-dimensional CFD for its potential to modify inlet/isolator flow-fields for engine start/unstart control and for its general potential for generating large-scale flow-field modification in such flows. A simplified (high Mach number) constant-area duct geometry is initially defined in order to test the feasibility of the concept; the results from this initial investigation demonstrates possible beneficial effects of depositing energy upstream of a thermally choked duct in terms of causing massive changes in flow patterns, including the reestablishment of supersonic flow throughout the duct. This study is followed by …

Thrust Measurement Of Dielectric Barrier Discharge Plasma Actuators And Power Requirements For Aerodynamic Control, Joseph William Ferry

Masters Theses

"Plasma-based aerodynamic actuators are of interest to researchers because they do not require moving control surfaces or a source of pressurized air to modify a flow field. Dielectric barrier discharge (DBD) plasma actuators have the added advantages of simple installation and low power consumption.

DBD plasma actuators are AC devices. This work measured actuator power consumption and thrust production for driving frequencies between 1 and 18 kHz, and for driving voltages of 6 and 9 kV peak to peak. The actuator consumed between 3 and 22 W of power and produced thrust levels between 0.05 and 0.2 mN per meter …

Integration And Test Of A Refrigerant-Based Cold-Gas Propulsion System For Small Satellites, Ryan Alan Pahl

Masters Theses

"Due to the launch safety constraints placed on university-built small satellites, designing a low-cost propulsion system to meet mission requirements presents a significant challenge to aspiring student engineers. The Missouri University of Science and Technology is currently developing a low-cost, two-phase propulsion system using the refrigerant R-134a as the propellant that can be stored at low pressures while still providing sufficient performance to meet mission goals. The purpose of this study is to present the testing results of a refrigerant-based cold gas system utilizing R-134a as a saturated liquid propellant and the ability to design this system to be portable …

Quantification Of Uncertainty In Aerodynamic Heating Of A Reentry Vehicle Due To Uncertain Wall And Freestream Conditions, Benjamin R. Bettis

Masters Theses

"The primary focus of this study is to demonstrate an efficient approach for uncertainty quantification of surface heat flux to the spherical non-ablating heatshield of a generic reentry vehicle due to epistemic and aleatory uncertainties that may exist in various parameters used in the numerical solution of hypersonic, viscous, laminar blunt-body flows with thermo-chemical non-equilibrium. Two main uncertainty sources were treated in the computational fluid dynamics (CFD) simulations: (1) aleatory uncertainty in the freestream velocity and (2) epistemic uncertainty in the recombination efficiency for a partially catalytic wall boundary condition. The Second-Order Probability utilizing a stochastic response surface obtained with …

Design Hazard Analysis, And System Level Testing Of A University Propulsion System For Spacecraft Application, Joseph R. Siebert

Masters Theses

"The Missouri Science and Technology Satellite (M-SAT) design team on the campus of the Missouri University of Science and Technology has developed a pair of satellites to perform an autonomous formation flight mission. To enable the mission, a unique cold gas propulsion system was developed which utilizes the refrigerant R-134a as propellant. This thesis details the design process and considerations which led to the propulsion system as integrated into the satellite for the Flight Competition Review of the NS4 competition. The design process described flowed from the mission requirements and program restrictions down through component-level requirements and resulted in a …

Continuous Control Of Lunar Orbits Via Electric Propulsion, Sunil Aggarwal

Masters Theses

"To find definite answers for the presence of water on the poles of Moon, to facilitate selection of future lunar landing sites and aid in construction of architectural bases, to assist proper lunar resource utilization and to improve lunar gravity models there is a great interest and need for highly accurate, reliable and efficient lunar surface mapping and communication. This thesis is intended to aid in proper selection of orbits for future lunar missions by demonstrating the impact of using electric propulsion on the search space of feasible and useful lunar orbits. The requirements for future lunar mapping and communication …

Global Skin Friction Diagnostics In Complex Separated Flows, Sudesh A. Woodiga

Masters Theses

This work describes the application of a global luminescent oil film skin friction meter to quantitative global skin friction diagnostics in complex separated flows. The development of this technique is based on the relationship between the oil film thickness and luminescent intensity of an oil film mixed with a luminescent dye. The projected thin oil film equation is given to relate the normalized luminescent intensity with skin friction. The basis for this technique is the variational solution for the thin oil film equation on the image plane. The variational formulation with a smoothness constraint on skin friction is proposed to …