Aerospace Engineering Commons^™

Investigation Of Pulse Detonation Engines: The Effect Of Variable Blockage Ratio On The Deflagration To Detonation Transition, Christopher Tate

Doctoral Dissertations and Master's Theses

Detonation and constant volume combustion is well known to be thermodynamically more efficient than the typically utilized constant pressure. There have been numerous approaches of achieving detonation through deflagration-to-detonation transition most of which use evenly spaced obstacles with a specified constant blockage ratio to generate turbulence and pressure fluctuations. There have been few efforts to study effects of varying blockage ratio as a function of axial distance. This research analyzes the effect of variable blockage ratio on deflagration-to-detonation transition in ethylene-air mixtures. The experiments show that with certain blockage ratio functions detonation is more repeatable and produces a smaller variation …

Scalloped Leading Edge Vaned Diffuser Analysis For A Compact High Pressure Ratio Centrifugal Compressor, Vinod Poonamchand Gehlot

Doctoral Dissertations and Master's Theses

Microturbines and small gas turbines are often an attractive option for turbo-hybrid application research in aviation due to their simple design and high power to weight ratio. However, the low operating pressure ratios of microturbines leads to low thermal efficiency, which results in very high fuel consumption. Higher operating pressure ratios in microturbines could vastly improve their current fuel efficiency. This thesis focuses on developing a compact, single stage 8:1 pressure ratio centrifugal compressor stage designed to meet the high-pressure ratio requirements of microturbines and small gas turbine engines in turbo hybrid-electric propulsion applications. The first stage vaned diffuser was …

Aircraft De-Icing System Using Thermal Conductive Fibers, Min Soon Park

Doctoral Dissertations and Master's Theses

The accumulation of ice on the leading edges of aircraft wing poses complications for flight control as drag is increased with a tendency for higher relative turbulence over the wing. Pre-emptive and reactive ice removal techniques have been employed in the past by electromechanical, thermal, chemical and pneumatic methods. In this thesis, a carbon fiber fabric is utilized as a heating de-icer for composites aircraft wing surface structures. Two prototypes are constructed, tested to generate temperature profiles, and an appropriate heating voltage is selected for effective de-icing via distinct avenues of heating system configurations. The heat transfer efficiency of the …

Economic Interrelationships And Impacts Of The Aviation/Aerospace Industry In The State Of Florida Using Input-Output Analysis, Kelly A. Whealan-George

Doctoral Dissertations and Master's Theses

The study provided a detailed description of the interrelatedness of the aviation and aerospace industry with principal industries in Florida and Volusia County (VC) using Input-Output (IO) analysis. Additionally, this research provided an economic impact analysis of the creation of a university research park in Daytona Beach (DB). The economic impact measures included not only direct economic output and industry employment descriptions but also described the multiplier effects in the form of indirect and induced impacts using data for 2012.

This research concluded the average labor income of the aviation and aerospace industry was higher than average labor income in …

Cubesat Wakes In The Earth’S Ionosphere, Robert M. Albarran Ii

Doctoral Dissertations and Master's Theses

Space exploration is currently being revolutionized by the advent of the CubeSat: 10cm cubed satellites that typically deploy in constellations for less than $100,000. Spacecraft instrumentation design must be redefined to abide by the compact CubeSat payload. Furthermore, the CubeSat dimension must be considered with respect to characteristic length scales of the space plasma environment, namely, the Debye length. Although spacecraft-plasma interactions- surface charging, plasma sheaths and wakes- have been well-studied for larger satellites, they are less understood for CubeSats.

The Dynamic Ionosphere CubeSat Experiment (DICE) is a 1.5U CubeSat which recently ended its mission. DICE carried two fixed-bias Langmuir …

Proof Of Concept Test For Dual-Axis Resonant Phase-Locked Excitation (Phlex) Fatigue Testing Method For Wind Turbine Blades, Jenna Austin Beckwith

Doctoral Dissertations and Master's Theses

The installed capacity of wind turbines has grown steadily for the past decade with wind energy now providing 3.6-percent of the U.S.’s electricity supply [13]. This trend can be attributed to advancements in wind turbine technology and the ability to increase wind turbine sizes. As wind turbines grow in size, so do the loads experienced by the turbine. One of the most significant load increases is in the lead-lag direction of the wind turbine blades. The increase in lead-lag load is due to the increase in weight of the larger blades. Current wind turbine blades have lead-lag and flapwise loads …

Development, Analysis, And Comparison Of Electromechanical Properties And Electrode Morphology Of Ionic Polymer Metal Composites, Balaji Sivasubramanian

Doctoral Dissertations and Master's Theses

With smart materials and adaptive structures being nudged into mainstream technology progressively, the smart composites are donning a predominant role as indispensable structures. Among these, the Ionic Polymer Metal Composites (IPMC), with their large bending deformation and relaxation characteristics at very low voltages are attractive as transducers in many areas of application. The actuation and sensing properties of IPMC have been sought after for various engineering functions. The paper focuses on manufacturing various types of IPMC. Combining the ionic polymer with platinum electrodes, gold sputter coated electrodes and multi-walled carbon nanotube Bucky paper electrodes to create enhanced IPMCs, comparative analysis …

Fatigue Damage Prognosis Of Internal Delamination In Composite Plates Under Cyclic Compression Loadings Using Affine Arithmetic As Uncertainty Propagation Tool, Audrey J-M Gbaguidi

Doctoral Dissertations and Master's Theses

Structural health monitoring (SHM) has become indispensable for reducing maintenance costs and increasing the in-service capacity of a structure. The increased use of lightweight composite materials in aircraft structures drastically increased the effects of fatigue induced damage on their critical structural components and thus the necessity to predict the remaining life of those components. Damage prognosis, one of the least investigated fields in SHM, uses the current damage state of the system to forecast its future performance by estimating the expected loading environments. A successful damage prediction model requires the integration of technologies in areas like measurements, materials science, mechanics …

Development Of An Exteroceptive Sensor Suite On Unmanned Surface Vessels For Real-Time Classification Of Navigational Markers, Christopher Lloyd Kennedy

Doctoral Dissertations and Master's Theses

This thesis presents the development of an exteroceptive sensor suite for real-time detection and classification of navigational markers on Unmanned Surface Vessels. Three sensors were used to complete this task: a 3D LIDAR and two visible light cameras. First, all LIDAR points were transformed from the sensor’s reference frame to the local frame using a Kalman filter to estimate instantaneous vehicle pose. Next, objects were chosen from the LIDAR data to be classified using either Multivariate Gaussian or Parzen Window Classifiers. Both produce 96% accuracy or better, however, multivariate Gaussian ran considerably faster than the Parzen and was simpler to …

Design And Dynamic Analysis Of A Variable-Sweep, Variable-Span Morphing Uav, Nirmit Prabhakar

Doctoral Dissertations and Master's Theses

Morphing wings have the potential to optimize UAV performance for a variety of flight conditions and maneuvers. The ability to vary both the wing sweep and span can enable maximum performance for a diverse range of flight regimes. For example, low-speed missions can be optimized using a wing with high aspect ratio and no wing sweep whereas high-speed missions are optimized with low aspect ratio wings and large wing sweep. Different static morphing wing configurations clearly result in varying aerodynamics and, as a result, varying dynamic modes. Another important consideration, however, is the transient dynamics that occur when transitioning between …

Vision-Aided Navigation For Gps-Denied Environments Using Landmark Feature Identification, Tennyson Samuel John

Doctoral Dissertations and Master's Theses

In recent years, unmanned autonomous vehicles have been used in diverse applications because of their multifaceted capabilities. In most cases, the navigation systems for these vehicles are dependent on Global Positioning System (GPS) technology. Many applications of interest, however, entail operations in environments in which GPS is intermittent or completely denied. These applications include operations in complex urban or indoor environments as well as missions in adversarial environments where GPS might be denied using jamming technology.

This thesis investigate the development of vision-aided navigation algorithms that utilize processed images from a monocular camera as an alternative to GPS. The vision-aided …

A Cfd Investigation Of The Hydrodynamic Characteristics Of Fluid Flow Through An Impeller And Multi-Objective Design Optimization Of A Centrifugal Pump, Mohammed Khammat Sagban

Doctoral Dissertations and Master's Theses

In this thesis, the first part is conducting an investigation of the hydrodynamic characteristics (pressure and velocity) of fluid flow (water) through an impeller of a centrifugal pump. To illustrate a one-dimensional model is used to identify an impeller of a GDM 10 x 12 HD centrifugal pump using Vista CPD design and BladeGen tool. A three-dimensional model is then built with a commercial software package ANSYS Blade Modeler. The structured mesh of the impeller blade is obtained by using TurboGrid system. The volute of the centrifugal pump is built in ANSYS geometry, and an unstructured mesh is accomplished by …

A Continuous/Discontinuous Fe Method For The 3d Incompressible Flow Equations, Nikolaos Kyriazis

Doctoral Dissertations and Master's Theses

A projection scheme for the numerical solution of the incompressible Navier-Strokes equation is presented. Finite element discontinuous Galerkin (dG) discretization for the velocity in the momentum equations is employed. The incompressibility constraint is enforced by numerically solving the Poisson equation for pressure using a continuous Galerkin (cG) discretization. The main advantage of the method is that is does not require the velocity and pressure approximation spaces to satisfy the usual inf-sup condition, thus equal order finite element approximations for both velocity and pressure can be used. Furthermore, by using cG discretization for the Poisson equation, no auxiliary equations are needed …

To Study The Effect Of Catalyst On The Physical Parameters Of Carbon Spheres, Tejas Shailesh Mehta

Doctoral Dissertations and Master's Theses

The discovery of fullerenes has opened up modern studies in carbon materials. Carbon nanoparticles have a large surface area and demonstrate good conductivity. Their unique properties has gained attention in many areas such as water filtration, hydrogen storage and battery electrodes. In this research, carbon spheres with high specific area and uniformity were grown using the Chemical Vapor Deposition (CVD) process with silicon substrates, ethylene (C2H4) as a carbon precursor and argon as the inert gas. We observe that the morphology of carbon spheres largely depend on the experimental conditions, including CVD time duration, temperature, catalyst and flow of gases. …

Exploration Of A Computational Fluid Dynamics Integrated Design Methodology For Potential Application To A Wind Turbine Blade, Gaurav Kapoor

Doctoral Dissertations and Master's Theses

The main purpose of this thesis is to conduct a parametric sensitivity study on the blade design of AOC 15/50 wind turbine based on a CFD approach and optimize the blade design for maximizing the power output. The ANSYS® Fluent® flow solver using the k-ω SST turbulence model was validated by simulating the flow over two dimensional airfoils comprising the AOC 15/50 wind turbine blade. The CFD results have shown a considerable agreement with the experimental data for the airfoils. Parametric correlation study and sensitivity analysis were conducted by performing actual flow simulations over the turbine blade using ANSYS® Fluent®. …

Investigation Of Pulse Detonation Engine Flow Conditions For Turbomachinery Integration, Luis Estefano Ferrer-Vidal EspañA-Heredia

Doctoral Dissertations and Master's Theses

Pressure gain combustion has been known to be more thermodynamically efficient than its constant pressure counterpart, which employs deflagration. Integration of pressure gain combustors into gas turbine engines has been and still is one of the most important challenges facing the gas turbine industry. Pressure gain combustion devices are inherently unsteady. This unsteadiness affects turbomachinery components designed using steady operation assumptions, and results in mechanical inefficiencies which could outweigh the thermal efficiency benefits. Understanding of turbine components specifically made to operate in the exhaust conditions provided by a pressure gain combustor may yield new turbine design paradigms. As a first …

Reduction Of Secondary Flow Losses In A Turbine For Use In Man-Portable Power Generation, Andrew J. Yatsko

Doctoral Dissertations and Master's Theses

As the world has moved into a more energy-demanding environment, there has been the push for higher energy density in a smaller package. One of the potential solutions is through the application of a gas turbine engine; yet the challenge is extracting the energy efficiently through the small components. The focus of the research is on the turbine components and how the secondary flow losses from the generated airfoil shapes can be reduced to improve component performance. One of the secondary flow loss items to be addressed is the generation of the Horseshoe Vortex. The Horseshoe Vortex is an aerodynamic …

The Effects Of Rewards On The Ability Of An Autonomous Uav Controlled By A Reinforcement Learning Agent To Accomplish A Target Localization Task, Hemali Dinesh Virani

Doctoral Dissertations and Master's Theses

The need for Unmanned Aerial System (UASs) is increasing in the fields of science, security, military and others. With an increasing number of challenges faced by mankind the need for system with advance autonomous and intelligent capabilities is growing rapidly. The required intelligent behavior can be achieved in an unmanned system with machine learning methods such as Reinforcement Learning (RL) theory. This theory presents algorithms which have the capability to learn how to adapt to its environment. Using RL methods, autonomous systems have the ability to use past experiences to improve future mission performance. In this research, the effects of …

Evaluation And Flight Assessment Of A Scale Glider, Alvydas Anthony Civinskas

Doctoral Dissertations and Master's Theses

The objective of this project is to do a flight assessment of a Phoenix K8B radio controlled glider to see what process is needed to verify its glide slope and stability characteristics. The flight test analysis, plus a computational fluid dynamics analysis, and an industry-like component build-up aerodynamic analysis were done to provide comparable estimates for the aircraft glide slope. A stability and control derivative analysis was also completed and compared using SURFACES, USAF Datcom, and MIT AVL software. The glide slope estimate and stability and control derivatives obtained from flight test data showed considerable range and uncertainty. Potential sources …

Unsteady Viscous Cavity Flow Using Computational Fluid Dynamics, Chandramouli Vadlamudi

Doctoral Dissertations and Master's Theses

The problem of unsteady viscous incompressible flow in a two-dimensional cavity is treated using the unsteady incompressible Navier-Stokes equations with various initial and boundary conditions. First the case of a square cavity with one inlet and one outlet is treated in steady and unsteady flows. The software package ANSYS FLUENT was used in the CFD simulations. This approach captures the appearance of separation bubbles and vortex formation inside the cavity. Steady state flows are also obtained from the unsteady simulations after convergence of the time dependent solutions. Then the case of a cavity with a synthetic jet and two outlets …

Axial Compressor Design With Counter-Rotation And Variable Rpm For Stall Mitigation, Madhur Tiwari

Doctoral Dissertations and Master's Theses

Compressor Stall, an aerodynamic instability due to abnormal air flow in the compressor resulting in loss of total pressure and compressor performance. One of the reasons of compressor stall is due to rise in static back pressure at compressor exit which may result from an imbalance of incidence angle at the rotor and stator and rotational speed. The paper presents the results of a new axial compressor design with counter rotation and variable RPM. Counter-Rotation is used to push compressor performance during stall by moving the operating point away from surge line with a higher pressure ratio rise. Initially an …

Early Damage State Criterion From A Fault-Seeded Helicopter Gear Using Acoustic Emission And Neural Networks, Rudy L. Baum

Doctoral Dissertations and Master's Theses

In response to five failures since 2008 of the tail gearbox of multiple models of Sikorsky's H-60 helicopter, acoustic emission (AE) data collected from a rotating gearbox test stand at the Naval Air Station in Patuxtent River, MD, was used to monitor the initiation and propagation of a flaw from an electro-discharge machined (EDM) notch seeded on the face of a gear tooth. A period of testing was considered which spanned ~300,000 seconds or ~83 hours and culminates to a damage state such that a flaw has initiated on both ends of the EDM notch. AE data was analyzed for …

A Comparative Study Of The Low Speed Performance Of Two Fixed Planforms Versus A Variable Geometry Planform For A Supersonic Business Jet, Aaron C. Smelsky

Doctoral Dissertations and Master's Theses

A numerical investigation of the effects of high lift devices on the low-speed performance of a generic swept wing and a delta wing was conducted. The two fixed planforms were initially sized to achieve the same high speed performance as the baseline variable geometry wing. Following a review of high lift devices a detailed analysis of their use was conducted with the aid of vortex lattice method and empirical formulations. The slat and Fowler flap combination proved to be the best mechanical solution. In comparison with the initially sized delta planform, the final delta planform required a 26% increase in …

Design Optimization Of A Composite Wing Box For High-Altitude Long-Endurance Aircraft, Philip T. Arévalo

Doctoral Dissertations and Master's Theses

A design optimization process is developed to define the wing box structure for High-Altitude Long-Endurance Aircraft (HALE). The goal of this study is to determine the best tradeoff between mass and rigidity of a HALE aircraft wing structure. A preliminary composite laminate structural design procedure is described which uses a NASTRAN-based Finite Element Analysis (FEA), and the Hierarchical Evolutionary Engineering Design System (HEEDS) MDO software to define a locus of acceptable, optimized wing box design definitions.

The Effect Of The 2-Dimensional Magnetic Field Profile In Hall Thrusters, Megan Lewis Harvey

Doctoral Dissertations and Master's Theses

Electric propulsion engines, in particular Hall thrusters, provide the possibility of long-distance, low-cost space travel. The geometrical details of the Hall thrusters, especially the magnetic field prole, are crucial to improving their efficiency. The effect of the magnetic field structure was investigated using a simple, two-dimensional model, assuming axial symmetry. The previous one-dimensional conclusion, namely that the details of the shape of the magnetic field are unimportant, was confirmed. This result has implications for the design of future Hall thruster engines, with an eye toward maximizing their efficiency.

Winglet Performance Evaluation Through The Vortex Lattice Method, Phil R. Rademacher

Doctoral Dissertations and Master's Theses

The purpose of the study was to assess the possibility of retrofitting winglets to the Dassault Falcon 10 small size business jet using the vortex lattice method solver program SURFACES© by GreatOWL Publishing. The winglet geometric parameters investigated were the winglet span, cant angle, sweep and taper ratio in terms of their influence on drag, range, fuel burn, as well as wing root bending moments. The results of the research show that winglet span and cant angle offer the highest gains in terms of performance while taper ratio and sweep angle have a minor contribution. In general, all winglets provided …

Separation Bubbles And Vortex Formation In Cavity Flows, Kartheek Ravulapati

Doctoral Dissertations and Master's Theses

This research is a computational fluid dynamic study of the formation of vortices and separation bubbles in a square cavity as well as in a cylindrical cavity. Whereas there has been previous research work on the problem of a free stream over different types of cavities, like open and closed cavities or lid driven cavities, this research on an inlet induced flow inside a square cavity lead to unusual and interesting basic fluid dynamical phenomena. The flow in a square cavity and in a cylindrical cavity is simulated over a range of Reynolds numbers and the appearance of separation bubbles …

Performance Improvement Through Velocity Triangle Optimization-Driven Redesign For Mitigating The Horseshoe Vortex In Axial Turbines, Vladislav Shulman

Doctoral Dissertations and Master's Theses

Momentum differences between the neighboring streamlines at the end wall/primary flow interaction region of an axial turbine stage induce three-dimensional vortical flow structures, such as the leading edge horseshoe vortex, resulting in significant aerodynamic performance deterioration. Reducing the effect of such flow instabilities requires turbine blade modification to discourage boundary layer roll-up, but traditional structural modification design systems can be prohibitively complex and time-intensive.

To address this problem, this study contributes a blade modification method involving airfoil shape optimization, designed to adjust the leading edge airfoil shape in horseshoe vortex-affected turbine applications. The key insight is that airfoil design (treated …

3d Aerodynamic Optimization Of Nrel Vi Wind Turbine Blade For Increased Power Output And Visualization Of Flow Characteristics, Tsewang Rabga Shrestha

Doctoral Dissertations and Master's Theses

The thesis focuses on the aspect of optimization of NREL VI wind turbine blade for increased power output using commercial solver ANSYS 14.5. The power curve obtained from BEMT, Baseline NREL VI CFD Simulations and Optimized Blade Simulations are compared with experimental results. Over prediction is observed in the theoretical result while computational analysis under predicts power produced at post stall region. Parameter correlation and sensitivity analysis study relates the effectiveness of design parameters on the objective outcome. Scatter plots and Determination Matrix indicate the problem setup as non-linear quadratic. Adaptive Single Objective Optimization algorithm is used for the optimization …

Evaluation Of Mixing-Limited Quasi-Global Wind-Us Model For Hifire 2 Flowpath, Michael R. Borghi Jr.

Doctoral Dissertations and Master's Theses

A Reynolds-averaged Navier-Stokes computational model featuring a mixing-limited, quasi-global chemical kinetics approach for an ethylene-methane fuel mixture is described and used in a validation effort against the Hypersonic International Flight Research Experimentation (HIFiRE) Direct Connect Rig experimental data for flight Mach numbers of 5.84, 6.5, and 8.0. An average error level between the numerical predictions and corresponding experimental measurements for static pressure along the engine flowpath is found to be within approximately 10%, for the two lowest Mach number cases, without calibration. Key features of the numerical flowfield development are identified, including regions within the combustor found to be significantly …