Aerospace Engineering Commons^™

Prediction Of Tonal Acoustic Radiation Due To Feedback-Loop Resonant Interactions In Transitional Airfoils, Seyyed Saman Salehian

Doctoral Dissertations and Master's Theses

The objective to this work is to employ the surface integral methods to study the far-field noise propagation from the flow acoustic resonant interactions of the transitional airfoil. The Potential-Theoretic Method (PTM) as an advancement to traditional Kirchhoff methods is presented. The PTM eliminated the need to calculate the normal derivatives of pressure and an arbitrary Kirchhoff surface can be employed. The numerical procedure to implement the PTM is fairly simple. The formulation and physical assumptions of the approach is reviewed, and the numerical procedure is implemented. Furthermore, the two dimensional formulation of the Ffowcs Williams - Hawkings (FW-H) equation …

Improving Damage Tolerance Of Composite Sandwich Structures Subjected To Low Velocity Impact Loading: Experimental And Numerical Analysis, Ravi B. Gondaliya

Doctoral Dissertations and Master's Theses

Sandwich structures with composite facing skins have seen applications in variety of sectors including aerospace and automobile, owing to their high specific mechanical properties. However, there is a need to develop better damage tolerant sandwich structures since conventional composite facing skins exhibit low impact resistance in the transverse direction. Here, composite skin sandwich structures with three different impact resistant core materials were fabricated and tested both experimentally and numerically. Neat CFRP and 2024-T3 aluminum alloy sheets were also investigated. Cores utilizing impact resistant D3O® were found to have very favorable weight specific energy absorbing properties at higher impact velocities as …

Nonlinear Control Of A Thermoacoustic System With Multiple Heat Sources And Actuators, Mikael O. Molina Sandoval

Doctoral Dissertations and Master's Theses

Thermoacoustic instabilities can occur in thermal devices when unsteady heat release is coupled with pressure perturbations. This effect results in excitation of Eigen-acoustic modes of the system. These instabilities can lead to unpredictable behavior of the system. Gas-turbine combustion systems are especially prone to this phenomenon reducing their overall efficiency. Additionally, due to the nature of the combustion, the turbines end up releasing undesired amounts of harmful chemicals to the atmosphere, such as Nitrous Oxide (NOX).

A Rijke tube, representing a resonator with a mean flow and a concentrated heat source, is a convenient system to study the thermoacoustic phenomena. …

A Hybrid Vortex Solution For Surge Margin Enhancement In Axial Compressors, Daniel Port

Doctoral Dissertations and Master's Theses

A new vortex solution to the Simple Radial Equilibrium Equation (SREE) is presented that incorporates endwall effects into the preliminary design stage of a single stage, low pressure compressor with a hub-to-tip ratio of 0.4 and non-axial inlet flow. This vortex solution is proposed to overcome the rapidly approaching asymptotic peak in compressor performance in the industry today. The Hybrid Vortex theory incorporates a versatile, higher-order solution to the SREE, resulting in more accurate preliminary designs requiring less manipulation in the final design stages. This new solution results in significant changes in hub geometry with the stagger of the hub …

A Biomimetic, Energy-Harvesting, Obstacle-Avoiding, Path-Planning Algorithm For Uavs, Snorri Gudmundsson

Doctoral Dissertations and Master's Theses

This dissertation presents two new approaches to energy harvesting for Unmanned Aerial Vehicles (UAV). One method is based on the Potential Flow Method (PFM); the other method seeds a wind-field map based on updraft peak analysis and then applies a variant of the Bellman-Ford algorithm to find the minimum-cost path. Both methods are enhanced by taking into account the performance characteristics of the aircraft using advanced performance theory. The combined approach yields five possible trajectories from which the one with the minimum energy cost is selected. The dissertation concludes by using the developed theory and modeling tools to simulate the …

An Investigation Of Cooling Configurations In Gas Turbine Engines Using Jet Impingement, Bhushan Upalkar

Doctoral Dissertations and Master's Theses

A numerical investigation for predicting the heat transfer effects of turbulence was conducted by making a scaled-up model of a section in a jet impingement channel. Different turbulence models were run and the results were compared to experimental data. Experimental comparisons were made for impingement channels between a baseline case, which is a rectangular array of jets of 20 rows and 3 jets per row, and different hole spacing configurations. The heat transfer was measured using Temperature Sensitive Paint. The turbulence model v²-f gave the most accurate prediction with an error of about 17% with the EB k-E, with an …

Direct Adaptive Control For Stability And Command Augmentation System Of An Air-Breathing Hypersonic Vehicle, Ron Aditya

Doctoral Dissertations and Master's Theses

In this paper we explore a Direct Adaptive Control scheme for stabilizing a non-linear, physics based model of the longitudinal dynamics for an air breathing hypersonic vehicle. The model, derived from first principles, captures the complex interactions between the propulsion system, aerodynamics, and structural dynamics. The linearized aircraft dynamics show unstable and non-minimum phase behavior. It also shows a strong short period coupling with the fuselage-bending mode. The value added by direct adaptive control and the theoretical requirements for stable convergent operation is displayed. One of the main benefits of the Directive Adaptive Control is that it can be implemented …

Aerodynamic Trade Study Of Compound Helicopter Concepts, Julian Roche

Doctoral Dissertations and Master's Theses

The relative performance attributes of compound helicopter concepts have been examined, including their potential for meeting the requirements of several challenging mission profiles. For each concept, which included lift and/or propulsive compounding, a suite of aerodynamic performance models was developed using energy methods. In the case of a lift-compounded concept, an aerodynamic model representing the force interaction effects of the main rotor wake with the wing was also developed. Models of a conventional helicopter and of a tiltrotor were implemented as well, and the results used as a datum for comparison. In each case, the predictive capabilities of the model …

Low-Velocity Impact Analysis Of Composite Repair Patches Of Different Shapes, Sarvesh Baliga

Doctoral Dissertations and Master's Theses

The area under crack for various structures can be effectively repaired by the use of composite materials. Low velocity impact can cause barely visible damage to the interior structure of laminated composite. These impacts can cause delamination in composite materials. In this study, a Finite Element Analysis was conducted using Abaqus/Explicit and the results of the analysis were compared to the experimental data from literature. E-glass/epoxy composite laminate was subjected to a low velocity impact test. To study the effect of patch repair, a composite patch was applied on a cracked laminate and a low velocity impact was then conducted …

Experimental And Computational Investigation Of Ribbed Channels For Gas Turbine Thermal Management, Yash T. Mehta

Doctoral Dissertations and Master's Theses

This study focuses on the computational benchmarking as well as validation against experimental results of a rib roughed surface in an internal channel of a stationary turbine blade. STAR-CCM+ was utilized to replace a model from a published article, and to analyze the CFD conjugate heat transfer by determining the turbulence model that best matched the published experimental values. Using those computational conditions and CFD results, an in house experimental rig was validated by comparing convective heat transfer coefficients and pressure profiles. This cooling method, when compared to a smooth channel, enhances turbulent mixing my separating and reattaching the boundary …

Lagrangian Points And Jacobi Constants For A Class Of Asteroids, Tasneem Rashid

Doctoral Dissertations and Master's Theses

Asteroid Gravitational Potentials are difficult to model owing to their irregularity in shape. This thesis focuses on two approaches to model asteroid gravity fields, namely, multiple-body and spherical harmonics modeling. Computation of gravity potential serves as a first step to determine equilibrium points called Lagrangian points for a spacecraft orbiting as an asteroid. Further, Jacobi analysis is carried out to determine zero-velocity regions, i.e., inaccessible regions corresponding to the unstable Lagrangian points. Multiple sphere modeling was studied through analysis of so called Asteroid Restricted Three and Four Body Problems, providing insight into the method of modeling an asteroid as a …

Design, Fabrication, And Testing Of A Proprioceptive Electroadhesion Pad For Space Applications, Walter Saravia

Doctoral Dissertations and Master's Theses

The purpose of this study is to design, analyze, and fabricate an electroadhesion mechanism with the goal of providing controlled electrostatic adhesion to objects with little known surface finish, of varying curvature, and different materials. The main purpose of the mechanism is that of ensuring a soft docking, controlled in closed loop, for attachment to large pieces of orbital debris. Other envisaged purposes for the mechanism are sample collection and manipulation in free-fall and in-situ analysis of cohesive forces in regolith at small bodies, such as asteroids or comets. Electrostatic finite element analysis was performed on various electroadhesion pad designs …

Numerical Study Of Synthetic-Jet Actuation Effect On Airfoil Trailing Edge Noise, Marco Sansone

Doctoral Dissertations and Master's Theses

The current study conducts numerical simulations to assess the possibility of employing Synthetic Jet Actuators (SJAs) as active noise control devices for reduction of airfoil acoustic radiation. High-accuracy numerical efforts employ a sixth-order accurate Navier-Strokes solver implementing a low-pass filtering of poorly resolved high-frequency solution content to retain numerical accuracy and stability over the range of transitional flow regimes. In the adopted numerical procedure, the actuator is modeled without its resonator cavity through imposing a simple fluctuating-velocity boundary condition at the bottom orifice of the actuator. The orifice cavity with the properly defined boundary condition is embedded into the airfoil …

The Three-Dimensional Turbulent Boundary Layer On A Rotating Disk, Daniel Digre

Doctoral Dissertations and Master's Theses

Three-dimensional turbulent boundary layers (3DTBL) are seen quite commonly in nature as well as in the engineering applications. Despite this, very few high Reynolds number studies have been carried out on these boundary layers, particularly focusing on eddy structure, eddy scales and their interactions. The current study focused on developing, characterizing and evaluating an experimental framework to study high Reynolds number #3DTBL on a rotating disk with the long-term goal of carrying out high-fidelity measurements. The rotating disk flow is characterized by weak centrifugal pumping which sets up the cross flow that leads to turbulence. The tangential and radial velocities …

Computation Of Hypersonic Flows With Lateral Jets Using K-Ω Turbulence Model, Spatika Dasharati Iyengar

Doctoral Dissertations and Master's Theses

Thermal Protection systems (TPS) are used as shields in space vehicles which encounter high heat and temperatures at the reentry altitudes. Among them, the cooling techniques and the ablative coatings are most popular. However, they have their own weight limitations. In the recent decade, another classification of TPS called the Non-Ablative Thermal Protection systems (NaTPS) have gained significance. The spike-lateral jet method is an NaTPS concept proposed for drag and heat flux reduction in hypersonic nose cones. Numerical simulations are conducted to analyze the effectiveness of spike-lateral jet concept at re-entry altitudes. The spike attached to the hemispherical nose has …

Similarity Analysis Of A Swirling Counter-Flow, Jitesh Rane

Doctoral Dissertations and Master's Theses

Swirling counter-flows are used in numerous engineering applications, like combustion, heat exchangers, cyclonic separation and mixing, etc. These swirling counter-flows produce complex flow fields. It is important to study these types of flows in order to use them properly in many applications.

The present work provides insight into the flowfield inside a swirling counter-flow when the fluid is injected tangentially in a cylindrical container. A semi-analytical solution is developed by starting with the full Navier-Stokes equation and using a similarity analysis. A decaying swirl along the axis of the cylinder is assumed, which reduces the Navier-Stokes equations to first order …

Design Of Synthetic Jet Actuator For Flight Control Of Small Uav, Priyanka Pagadala

Doctoral Dissertations and Master's Theses

The main idea of this project is to develop a prototype SJA - Synthetic Jet Actuator to embed into a small UAV with modified Glauert wing cross-section for Active Flow Control. Apart from lift enhancement, drag reduction, or separation control, etc; LCO suppression might be possible by modifying the boundary layer through the use of these actuators. For initial investigation, a wing section with span of 12.4 cm and chord of 14 cm was fabricated and tests were conducted in the subsonic wind tunnel at the free stream velocities of 5 and 10 m / s. From these experiments, lift …

Sensor Fusion And Obstacle Avoidance For An Unmanned Ground Vehicle, Gurasis Singh

Doctoral Dissertations and Master's Theses

In recent years, the capabilities and potential value of unmanned autonomous systems (UAS) to perform an extensive variety of missions have significantly increased. It is well comprehended that there are various challenges associated with the realization of autonomous operations in complex urban environments. These difficulties include the requirement for precision guidance and control in conceivably GPS-denied conditions as well as the need to sense and avoid stationary and moving obstructions within the scene. The small size of some of these vehicles restricts the size, weight and power consumption of the sensor payload and onboard computational processing that can accommodated by …

Surface Structure And Its Effect On Reducing Drag, Ragini Ramachandran

Doctoral Dissertations and Master's Theses

A miniature subsonic open return wind tunnel was designed and fabricated to measure drag on small test models at low Reynolds numbers. The wind tunnel featured a sensitive strain gauge type load cell. The average drag coefficient of sphere and cube test models were used to validate the miniature wind tunnel, and the values obtained were consistent with published results over the range of Reynolds numbers tested. These initial results gave confidence that the tunnel could be used to study the effects of surface finish on the drag of various models. Several fabrics with differing ribbed surface structures, including a …

Phased Array Beamsteering In Composite Laminates For Guided Wave Structural Health Monitoring, Peter Osterc

Doctoral Dissertations and Master's Theses

In this study a guided wave phased array beamsteering approach is applied to composite laminates. Current beamsteering algorithms derived for isotropic materials assume omnidirectional wave propagation. Due to inherent anisotropy in composites, guided wave propagation varies with direction and wavefronts no longer have perfect circular shapes.

By examining slowness, velocity and wave curves, as well as amplitude variation with direction for a given composite laminate, the wavefront from a single source can be described as a function of the angle of propagation and distance from origin. Using this approach, a more general delay and sum beamforming algorithm for composite laminates …

Modeling And Simulation Of Radiation From Electronic Transitions In Hypersonic Atmospheric Reentry Flow, Curtis Scholz

Doctoral Dissertations and Master's Theses

A capability for higher accuracy heat transfer modeling in CFD for hypersonic re-entry flows, via inclusion of thermal radiation, is sought. With temperatures reaching tens of thousands of degrees, radiation is known to be significant to chemical reaction rates and thermal boundary layer development, hence surface heat transfer and thermal ablation both to the heat shield and the backshell region of re-entry vehicles. Two current NASA solicitations seek such an improved capability relative to the Mars and Earth entry problems, as uncertainty typically leads to overdesign and excess weight. The present research develops a first physics-based “building block,” which computes …

Supersonic Retro-Propulsion Computational Fluid Dynamics Analysis Applied To Future Mars Mission, Margarita Nataly Brandt

Doctoral Dissertations and Master's Theses

Supersonic Retro-Propulsion is one of the most promising emerging technologies being considered by NASA for use in future Mars missions. This new form of Entry Descent Landing has the potential to help increase the allowable payload mass currently constraining many science instruments and operations. Computational Fluid Dynamics was used to show the feasibility of supersonic retro - propulsion in Mars atmospheric conditions. The results presented show the SRP will be able to perform satisfactory using the same conditions that the Curiosity Rover was exposed to during its landing sequence. The plume expansion was analyzed for various cases, moving from free …

Aerodynamic And Structural Design Of A Winglet For Enhanced Performance Of A Business Jet, Nicolas El Haddad

Doctoral Dissertations and Master's Theses

The preliminary design of a winglet to improve the range and fuel burn of the Falcon 10 business jet is presented. Twelve candidate geometries were studied varying the cant angle and the span. The configuration offering the best compromise between induced drag reduction, profile drag increase and weight increase due to the winglet structure and necessary wing structural reinforcement was selected. More refined analysis was performed for that winglet with Reynolds averaged Navier-Stokes computational fluid dynamics and finite element analysis. Range and fuel burn were finally calculated for a typical mission using these refined results. The selected winglet, with a …

Attitude Determination & Control System Design And Implementation For A 6u Cubesat Proximity Operations Mission, Francisco J. Franquiz

Doctoral Dissertations and Master's Theses

The purpose of this work is to discuss the attitude determination and control system (ADCS) design process and implementation for a 12 kg, 6U (36.6 cm x 23.9 cm x 27.97 cm) CubeSat class nano-satellite. The design is based on the requirements and capabilities of the Application for Resident Space Object Proximity Analysis and IMAging (ARAPAIMA) proximity operations mission. The satellite is equipped with a cold gas propulsion system capable of exerting 2.5 mN m torques in both directions about each body axis. The attitude sensors include an angular rate gyro and star tracker (STR), supplemented by the payload optical …

Analysis Of A Hybrid Rocket Burn Using Generalized Compressible Flow, Naveen Sri Uddanti

Doctoral Dissertations and Master's Theses

The analysis of square ports in a hybrid rocket is simple when compared to other complicated port geometries such as a wagon wheel configuration. In the present work, fuel grains with several ports in a hybrid rocket engine are analyzed by transforming the ports into equivalent square ports. As an example, the internal ballistics of a hybrid rocket with circular ports is analyzed by transforming it to an equivalent solid grain with square ports having the same amount of solid fuel and burn time. The results obtained are similar to that of circular port but with a slight decrease in …

Comparing Different Methods For Estimating Total Open Heliospheric Magnetic Flux, Samantha J. Wallace

Doctoral Dissertations and Master's Theses

There are extended periods over the solar cycle where significant discrepancies occur between the observed open magnetic flux (i.e., those based on spacecraft observations) and that determined from coronal models. One explanation for the source of these discrepancies is the magnetic fields in CMEs, which have yet to magnetically disconnect from the Sun. These “closed” flux sources can be included in open flux estimates, because open and closed magnetic field lines are not easily distinguished in spacecraft data. Another possibility is that a portion of the open flux measured by in situ spacecraft originates from the time-dependent evolution of solar …

The Design For Manufacturing And Assembly Analysis And Redesign Of An Aircraft Refueling Door Hinge Utilizing Additive Manufacturing, Kurt A. Schwarz

Doctoral Dissertations and Master's Theses

In this thesis, an aircraft door hinge assembly provided by Gulfstream Aerospace was analyzed following an established process called DFMA. The hinge was then redesigned to be additively manufactured, which is uncommon currently in industry for load bearing components. It was shown that the Design for Manufacturing (DFM) guidelines were inadequate when applied to the new technology of additive manufacturing (AM). This was primarily due to AM's unique and unprecedented manufacturing capabilities.

A conservative redesign approach was followed due to a limitation in current AM material properties and time available for analysis. Despite this, a significant improvement in weight reduction …

Numerical Investigation Of Tonal Noise On A Transitional Airfoil Under Varying Conditions, Warren W. Hiner

Doctoral Dissertations and Master's Theses

The generation of discrete acoustic tones is a problem of interest in transitional airfoils. Such tones exist for moderate Re below 2,000,000 and for low to moderate angles of attack. The purpose of this study is to use linear stability theory to study the growth of instabilities on the pressure and suction surfaces of airfoils for varying Re between 144,000 and 468,000 and angles of attack between 0˚ and 12˚. High accuracy 2D simulations based on an Implicit Large Eddy Simulation (ILES) code are conducted for a NACA0012 airfoil for varied conditions, and linear stability analysis is performed to predict …

Determination Of A Simplified High-Order Vortex Equation For Radial Equilibrium With Cfd Verification, Travis K. Matsumoto

Doctoral Dissertations and Master's Theses

The goal of this thesis is to determine a flow model that provides a better blade design over current design techniques utilizing a hybrid vortex model. This hybrid vortex model combines the well-established simple radial equilibrium vortex models into a higher order equation that will establish the basis for a more flow-accurate model. In this paper, we will discuss the basis and derivation of these vortex models, the shortcomings of current techniques, and verification of the new vortex model with empirical data via Computational Fluid Dynamic (CFD). The simple radial equilibrium equation set has been known to the scientific community …

Benchmarking Of Computational Models Against Experimental Data For Adiabatic Film-Cooling Effectiveness For Large Spacing Compound Angle Full Coverage Film Cooling Arrays, Simon R. Martinez

Doctoral Dissertations and Master's Theses

This study aims to benchmark experimental data that tested the effects of blowing ratio, surface angle, and hole spacing for two full coverage geometries composed of cylindrical staggered holes at a compound angle of 45 degrees. These holes varied parametrically the inclination angle to be 30 and 45 degrees, while maintaining a lateral and axial spacing of 14.5 hole diameters. Within this study, the local film cooling effectiveness was obtained from 30 rows for the 14.5 diameter spacing. Utilizing a velocity profile at the crossflow inlet produced significant differences in the results produced when compared to a uniform freestream velocity …