Aerospace Engineering Commons^™

Broncoblade: An Open Source Wind Turbine Blade Analysis Tool, Alex R. Quinlan

Masters Theses

This thesis reports the development and validation of BroncoBlade, a horizontal axis wind turbine analysis tool. BroncoBlade prepares finite element models and integrates them with an aeroelastic simulator. Analysis results for the SNL100-00 baseline blade are evaluated against reference results published by Sandia National Laboratories. Variations on the SNL100-00 blade incorporating carbon fiber are compared to the baseline blade.

Development Of Cfd Models For The Purposes Of Exploring Free Surface Wave Phenomena, Leonard P. Stoehr

Masters Theses

With the push for finding alternative, green energy sources, the harnessing of energy from ocean and lake waves is becoming a more researched field. To fully understand the behavior of wave interactions and optimize designs to extract this energy, it is necessary to develop computer models that can accurately replicate this behavior. A case is presented in which previous work done using the wave tank found in the Western Michigan University fluids lab is examined. The case involves harnessing the energy generated by ocean waves through the usage of plates of different shapes resting horizontally on the water’s surface. The …

Computational Analysis Of A Wing Oscillator, Ryne Derrick Radermacher

Masters Theses

An analysis of a newly proposed wind power extraction device called a wing oscillator was performed using computational fluid dynamics (CFD). A wing oscillator is a device that consists of two airfoils attached to a central pivot by means of a frame or shaft. Oscillatory motion is produced by controlling the angle of attack of the airfoils as a fluid flow is passed over the device. A robust mathematical scheme was developed to investigate the performance of the wing oscillator and was hooked to the CFD software package FLUENT through User Defined Functions (UDFs). Using the dynamic meshing analysis methods …

The Art And Beauty Of Flight, Edmond Ing Huang Tan

The Hilltop Review

This picture nicely represents the art and gracefulness of flight with the beauty of sunset in a tranquil setting. In the picture is a powered paragliding, also known as paramotoring in the plains of Nebraska. The ability to fly both low and slow safely, the 'open' feel, the minimal equipment and maintenance costs, the portability, minimally regulated and requires no license are claimed to be this type of flying's greatest merits. Paramotors can be flown during any season of the year anywhere but not in high wind conditions which typically means at low Sun azimuths as shown in the picture …

Microgas Turbine Engine Characteristics Using Biofuel, Edmond Ing Huang Tan, William W. Liou

The Hilltop Review

Aviation fuels commonly used today are extracted from the kerosene fraction of the crude oil that is distilled between the gasoline and the diesel. Crude oil is not renewable and the world oil reserve is generally believed to be on the decline. In 2006, 6.3% of the world's refinery production was used for aviation fuel (Nygren et. al., 2009). At an estimated rate of 3% increase of fuel demand per year, aviation use alone will consume the world fuel production by 2026. Therefore, there is a need for the aviation industry to reduce its dependence on fossil fuels and, perhaps, …

Blair Balden, Margaret Von Steinen

International Faculty Researchers

A visiting professorship at the University of Passau in Passau, Germany for Dr. Blair Balden, a WMU associate professor of aviation, provided an excellent opportunity to share ideas and information about teaching aviation law with professors from Germany and Austria.

Ductile Mode Material Removal Of Ceramics And Semiconductors, Deepak Ravindra

Dissertations

Ceramics and semiconductors are hard, strong, inert and lightweight. They also have good optical properties, wide energy bandgap and high maximum current density. This combination of properties makes them ideal candidates for tribological, semiconductor, MEMS and optoelectronic applications respectively. Manufacturing these materials without causing surface and subsurface damage is extremely challenging due to their high hardness, brittle characteristics and poor machinability. However, ductile regime machining of these materials is possible due to the high-pressure phase transformation occurring in the material caused by the high compressive stresses induced by the single point diamond tool tip. In this study, to further augment …

Beading And Dimpling Techniques To Improve The Vibration And Acoustic Characteristics Of Plate Structures, Nabeel Taiseer Alshabtat

Dissertations

A method of improving the vibroacoustic characteristics of beams and plates is presented. This method is based on creating dimples or beads on the surface of the structures. The proposed method couples the finite element method with an optimization technique based on the genetic algorithm (GA). The improvement of the vibroacoustic characteristics of beams and plates is achieved by two separate strategies. The first strategy is optimizing the natural frequencies of beams and plates. The second strategy is minimizing the sound radiation from such vibrating structures. Optimizing the natural frequencies of some types of beams and simply supported plates by …

Modeling The Momentum And Mass Transfer Within A Micro-Scale Polymer Electrolyte Membrane Fuel Cell For Flows Within The Slip Flow Regime, Sean Tamarun Goudy

Dissertations

Polymer Electrolyte Membrane (PEM) fuel cell systems are heterogeneous catalytic systems. Although there are many computational models that describe the behavior of PEM fuel cells, few simulate the catalyst surface concentration of reactant gases at the catalyst layer-membrane layer inteface. Most PEM fuel cell models make no distinction between the bulk concentration of reactants and the catalyst surface concentration of reactants. It is the surface concentration that is key when studying PEM fuel cell systems: the reactions occur at the surface of the catalyst.

In addition, few model the dynamics within the non-continuum flow region near the solid surfaces of …

Simulation, Synthesis, And Characterization Of Hydrogels And Nanocomposite Gels., Kamleshkumar J. Suthar

Dissertations

Stimuli-responsive gels are three-dimensional, cross-linked polymeric materials that undergo large physical change in response to the environmental stimuli, like temperature, pH, electrical potential, and irradiation. Ferrogels are colloidaldispersion of magnetic nanoparticles in the hydrogel network. The magnetic nanoparticles are attached to the polymeric network by different adhesive forces; as a result, it becomes sensitive to the applied magnetic field.

The main objective of this research is the simulation, synthesis, and characterization of the hydrogel and ferrogel. Simulation of the hydrogel response was performed for various environmental stimuli using a multiphysics finite element analysis software, COMSOL. The pH and electrical response …

Global Skin Friction Diagnostics In Complex Separated Flows, Sudesh A. Woodiga

Masters Theses

This work describes the application of a global luminescent oil film skin friction meter to quantitative global skin friction diagnostics in complex separated flows. The development of this technique is based on the relationship between the oil film thickness and luminescent intensity of an oil film mixed with a luminescent dye. The projected thin oil film equation is given to relate the normalized luminescent intensity with skin friction. The basis for this technique is the variational solution for the thin oil film equation on the image plane. The variational formulation with a smoothness constraint on skin friction is proposed to …

Atomistic-Based Finite Element Simulation Of Carbon Nanotubes, Yang Yang

Dissertations

Since first found in the form of multi-walled carbon nanotubes (MWNTs) by Iijima(1991), carbon nanotube (CNT) for its outstanding and unique properties have gained overwhelming attentions from across the spectrum of the science and engineering fields. CNTs are structurally perfect, small size, low density, high stiffness, high strength (Qian et al., 2002), and their electronic properties depend on the particular distortion as well as the initial tube diameter and chirality, ranging from narrow-gap or moderate-gap semiconducting to metallic (Pantano et al., 2004b), which can be utilized in nanoscale sensors and devices. These appealing characteristics provide strong drives for the possible …

Investigation Of Knock In Gaseous Fuels In The Presence Of Diluents, Roshan Ashok Rodrigues

Masters Theses

Recent energy security and environmental concerns have prompted growing interest into utilization of alternative fuels such as, natural gas and landfill gas. These gaseous fuels contain significant amount of diluents in the fuel composition, such as carbon dioxide, nitrogen, water vapor and other trace gases, which vary by geographical location. Successful engine operation is limited by a phenomenon called "knock", which occurs due to auto-ignition of the end gas ahead of the flame front, and therefore, needs to be investigated with the utilization of these gaseous fuels.

The present contribution discusses the experimental set-up, procedure and results of the investigation …

Selection Of Attractor Sounds For An Audio-Based Navigation System For The Visually Impaired, Brad Salisbury

Masters Theses

Research in to human hearing has been very ‘laboratory’ oriented in the sense that the test environments do not replicate most ‘real world’ situations [J.C. Middlebrooks and D.M. Green, Ann. Rev. of Psychology, 42, 135-159 (1991)]. While very useful information is gained from these types of tests, it is difficult to see how ‘real world’ situations affect sound source localization, recognition, and navigation (walking/way finding) performance. Such information is especially important to people who are visually impaired and dependent on prior knowledge of the environment or audio cues for travel. The research reported here was conducted during the development of …

Load Interaction Effects On Fatigue Crack Growth, Stoyan Ivanov Stoychev

Dissertations

Load excursions, in the form of tensile and compressive overloads are known to produce interaction effects during subsequent constant amplitude loading. In this work, the fatigue crack growth and crack closure levels, under both constant amplitude and variable amplitude loading, are investigated in the aluminium-lithium alloy 2090-T84, and the aluminium alloys 2024-T351 and 7150-T651. The crack closure measurements were obtained using both a crack tip opening displacement (CTOD) gauge and a crack mouth opening displacement (CMOD) gauge.

Fatigue crack growth tests were performed on specimens of thickness 1.6mm, 3mm, 6mm and 14mm. Tests were performed at load ratios of 0.1 …

Subcooled Pool Boiling Heat Transfer Using R113 On Flat Surface, Kamleshkumar J. Suthar

Masters Theses

Pool boiling experiment was conducted to investigate the effect of subcooling on boiling of R-113 using 25mm effective dia. flat surface copper heater. Pool boiling heat transfer measurements were taken for wide temperature range of 5 - 39^o C subcooling and investigated thoroughly. Variation in value of wall superheat of incipience boiling, from 27 to 34^o C and 7 to 11^o C temperature excursion observed. Noticeable effect of subcooling on boiling heat transfer is observed. Degree of subcooling was maintained constant by regulating pressure and keeping constant fluid temperature for each test run. Tests were conducted by …

Investigation Of The Iced Flowfield Characteristics Related To The Stall Margin Instrumentation Used In Icing Conditions, Erik Pederson

Dissertations

The purpose of this dissertation is to investigate the relationship between the flowfield surrounding an iced airfoil and the stall margin instrumentation developed for use in icing conditions. The stall margin system indicates to the pilot the change in available lift due to ice accretions on the leading edge of an airfoil. This system displays the change in the form of a normalized lift coefficient. Four pressure ports are chosen to specifically maintain a constant calibration curve, for pressure versus normalized lift coefficient, regardless of ice shape. This allows these pressures to be used to determine the change in maximum …

Using The Boundary Element Method For Prediction Of Sound Radiated From An Arbitrarily Shaped Vibrating Body, Mark J. Christensen

Masters Theses

The Boundary Element Method can be used to predict sound pressure levels radiated from an arbitrarily shaped vibrating body. Using the Direct, Indirect and Approximation formulation one can solve such an ‘exterior’ acoustic problem. In this work, the Direct formulation was chosen. The two major methods employed for implementation of this formulation are the Combined Helmholtz Integral Equation Formulation (CHIEF) and the Burton–Miller Method. Since the CHIEF method was easier to program and adapt to changes, it was decided that the CHIEF method would be the focus of this research. Using the CHIEF method as a guide, a computer simulation …

Numerical Studies Of Transition For Flows Around Multi-Element Airfoils, Fengjun Liu

Dissertations

The transition of flows around a multi-element airfoil has been numerically studied using RANS with a k - e two-equation transition model, LST and DNS. The transition model uses an effective eddy-viscosity by coupling an intermittence-like correction to a turbulence eddy-viscosity that can be obtained via solving a parent k - e turbulence model. The transition model is truly predictive in that it is able to predict transition onset locations without having to specify prior knowledge of the targeted transition process. The predicted transition onset locations for all the cases studied were compared with the measured data. The results suggest …

Systematic Methods For The Design Of A Class Of Fuzzy Logic Controllers, Saad Y. Yasin

Dissertations

Fuzzy logic control, a relatively new branch of control, can be used effectively whenever conventional control techniques become inapplicable or impractical. Various attempts have been made to create a generalized fuzzy control system and to formulate an analytically based fuzzy control law. In this study, two methods, the left and right parameterization method and the normalized spline-base membership function method, were utilized for formulating analytical fuzzy control laws in important practical control applications. The first model was used to design an idle speed controller, while the second was used to control an inverted control problem. The results of both showed …

Development Of An Integrated Sensor For The Measurement Of The Acoustic Local Volume Displacement Of Vibrating Beams, Randall Rozema

Masters Theses

Currently, the methods used for sensing the volume displacement of a vibrating structure entail the use of a polyvinylidene fluoride sensor that spans the entire length of the structure. However, this work shows that the surface behavior related to volume displacement can be measured through the use of a polyvinylidene fluoride sensor that spans only the area of interest. In this application it was shown that two-point sensors are required in addition to the distributed, polyvinylidene fluoride sensor to achieve an accurate measurement. As a result, a set of four beams with different end conditions were constructed so that the …

Enhancing Commercial Aircraft Survivability Via Active Venting, Roger L. Veldman

Dissertations

A new technique for enhancing aircraft safety in the event of an on-board explosion was studied. The method under study employs deployable vent panels located on the fuselage which are activated by an array of pressure sensors in the aircraft interior. In the event that an explosion is detected, appropriate vent panels are rapidly released from the aircraft. This approach seeks to provide timely relief of explosive pressures within an aircraft to prevent catastrophic structural failure.

In this study, the approximate time scale of an explosive detonation and the subsequent sensing and electronic processing was determined. Then, the actuation response …

Active Local Volume Displacement Cancellation Of A Vibrating Baffled Beam, Marcellin Zahui

Dissertations

An active noise control apparatus is developed. The device reduces the sound radiated from a vibrating clamped beam. The attenuation of the sound field is obtained through minimization of local volume displacements of the vibrating beam. Two single-input/single-output cancellation devices are used. Each device employs a motion sensor and an acoustic actuator. The actuator is a loudspeaker equipped with a pressure sensor to detect its volume displacement. The motion sensor signal is related to the local volume displacement of the structure which is then reduced by a loudspeaker driven with an equal but opposing volume displacement. The volume displacement sensors …

Experimental Investigation Of Water Spray Cooling Characteristics Of A Solid Heated Surface, Rainer F. Ponzel

Masters Theses

Water spray cooling characteristics of a solid heated surface were investigated to better understand the physical phenomenon of nucleate boiling heat transfer for full cone sprays. An experimental test loop was developed to conduct the spray cooling experiments. A uniform heat flux condition was assumed, and the liquid flow rate and nozzle orifice diameter were selected as the main variables. Two water temperatures were chosen to perform the study. Saturated water spray was utilized to measure the wall superheat temperature. Subcooled water spray was applied to investigate the effect of water spray in the single-phase regime.

Experiments conducted using the …

Flow Due To A Moving Pressure Distribution Over Free-Surface With Finite-Depth Bottom, Noriaki Okita

Masters Theses

Two-dimensional, steady-state and time-dependent analysis of wave making phenomenon due to a moving pressure distribution in sub-critical Froude number was performed. The domain is consisted of undisturbed free-surface at y=0, flat bottom at y=-h, and it is unbounded in horizontal direction. The pressure distribution was treated as an ideal model of an air-cushioned-vehicle (ACV). Ideal flow theory and linearized boundary conditions were used. Numerical integration algorithm was developed to evaluate the analytical solution. The surface elevation, bottom pressure profiles, and wave resistance were analyzed as functions of speed and depth.

The steady-state wave resistance calculated from the surface elevation profile …

The Pratt & Whitney 4060: Power For The Future, Gregory Sumner

Honors Theses

The Pratt & Whitney 4000 engine platform is considered the most economical turbofan engine in its class. It is advertised as providing the most efficient service and the most reliability for air carriers. United Airlines utilizes the company's engines. The paper begins with basic turbine engine theory and moves on to engine classifications, where the Pratt & Whitney 4060 is introduced. The systems are covered in detail. Maintenance areas of service and inspections are described to show how personnel may interact with the computers. Finally, a description of activities during the author's internship describe the interesting facets of a semester …

Dynamic Pulse Buckling Of Columns With Viscous Damping, Murli Kadandale

Masters Theses

This is a study of dynamic pulse buckling of columns with viscous damping. The differential equations of motion were obtained using the Bemoulli-Navier hypothesis. The effects of axial and rotary inertia were included in the analysis. The Voigt-Kelvin model for a viscoelastic material is used. The Finite Difference Method was employed to solve the differential equations of motion. First columns without geometrical imperfections were studied, and a correlation between the damping modulus and the more familiar damping ratio was obtained. Then beams with initial geometrical imperfection were studied. A suitable dynamic buckling criterion was defined. It was observed that viscous …

An Investigation And Improvement Of Electrorheological (Er) Fluid Technology, Adil F. Dalal

Masters Theses

The purpose of this research was to investigate and overcome the limitations of Electrorheological (ER) fluids and to introduce this advanced technology at WMU. Electrorheological (ER) Fluids are a special class of fluids, which exhibit a reversible, infinitely variable phase transition from a liquid to a solid/semi-plastic state, in the presence of an electric field.

ER fluids can provide a unique solution to the problems of vibration isolation of systems. The applications are currently limited due to the high voltage requirements, electric power related heating and limited research into wear/abrasive characteristics of ER fluids.

A specially designed and constructed "electro-viscosimeter" …

Primary Coolant Flow Characteristics As It Exits The Palisades Reactor, Gregory Alan Baustian

Masters Theses

During fuel cycles 9 and 10 at the Palisades Nuclear Power Plant, new phenomena have been observed using the resistance temperature devices installed in the reactor coolant piping. Oscillations in the temperature readings have been observed leading to the assumptions that there is temperature stratification of the coolant in the reactor hot-legs and that the coolant rotates as it leaves the reactor. In addition, oscillations in the bulk coolant flow within the two hot legs have been postulated. This report outlines work performed using computational fluid dynamics modelling which predict the observed and assumed flow characteristics of the Palisades reactor …

Analysis Of Sandwich Plates Subjected To Blast Loading, Vijay Prasad Bulla

Masters Theses

A dynamic analysis is presented for the bending response of square sandwich plates with isotropic core and facings under blast type pressure. The maximum central deflections of simply supported plates under static and dynamic loadings are compared for various thicknesses and elastic moduli. The deviation of the thick sandwich plate results from the pure-bending theory results is presented for various core properties. Small deflection dynamic iso-response plots are shown for different core rigidities. To study the limits of small deformation linearity for various sandwich plates, non-linear results for deformations under high pressure loads are compared with the linear results. The …