Aerospace Engineering Commons^™

Phase Change Cells And The Verification Of Gallium As A Thermal Calibration Reference In Space, Harri Latvikoski, Gail E. Bingham, T. Shane Topham, Igor Podolski

Space Dynamics Laboratory Publications

The validation of models of global climate change and accurate measurement of the atmosphere and surface temperatures require that orbital sensors have low drift rates, and are monitored or regularly recalibrated by accepted standards. Phase change materials (PCM), such as those that make up the ITS-90 standard, are the basis for international commerce and have been suggested for monitoring and recalibration of orbital temperature sensors. Space Dynamics Laboratory (SDL) and its partners have been developing miniaturized phase change reference technologies that could be deployed on an orbital blackbody for nearly a decade. A significant part of this effort has been …

Contributions Of Mass And Bond Energy Difference And Interface Defects On Thermal Boundary Conductance, Nicholas A. Roberts, Changjin Choi

Mechanical and Aerospace Engineering Faculty Publications

The impact of mass and bond energy difference and interface defects on thermal boundary conductance (TBC) is investigated using non-equilibrium molecular dynamics (NEMD) with the Lennard-Jones (L-J) interatomic potential. Results show that the maximum TBC is achieved when the mass and bond energy of two dissimilar materials are matched, although the effective thermal conductivity is not necessarily a maximum due to the contributions of the thermal conductivity of the constituent materials. Mass and bond energy differences result in a mismatch between phonon dispersions, limiting high frequency phonon transport at the interface. This frequency mismatch is defined by a frequency ratio, …

Common Calibration Standards For Visible/Infrared Optical Sensors Are Essential To Multi-Sensor Missile Defense Architectures, Joe Tansock, Alan Thurgood, Bruce Guilmain, Garry Schnelzer

Space Dynamics Laboratory Publications

Outline

• What is calibration and why is it important?
• What calibration provides to visible/infrared optical sensors being used for missile defense
• Mapping of missile defense needs to calibration domains
• Calibration planning
• Calibration examples (airborne and spaceborne)
• Summary

Tuning And Measuring Trap Shape For Cold Atom Sensors, James A. Stickney

Space Dynamics Laboratory Publications

Table of Contents

1. Tuneable atom chip
2. Cloud sloshing in a weakly non-harmonic trap
3. Data

Flexsar A High-Quality, Flexible, Cost-Effective, Prototype Sar System, Mark Jensen, Chad Knight

Space Dynamics Laboratory Publications

The FlexSAR radar system was designed to be a high quality, low-cost, flexible prototype instrument. Many radar researchers and practitioners desire the ability to efficiently prototype novel configurations. The resulting cost and time required to modify existing radar systems is a challenging hurdle that can be prohibitive. The FlexSAR system couples an RF design that leverages connectorized components with digital commercial of the shelf (COTS) cards. This design allows for a scalable system that supports software defined radio (SDR) capabilities. This paper focuses on the RF and digital system design discussing the advantages and disadvantages. The FlexSAR system design objective …

Single Wavelength Lidar Retrieval Algorithm Of Particulate Matter Concentration Using Celis (Compact Eyesafe Lidar System), A 1.5 Μm Elastic Lidar System, Alan W. Bird, Kori D. Moore, Michael Wojcik, Robert Lemon

Space Dynamics Laboratory Publications

CELiS (Compact Eyesafe Lidar System) is an elastic backscatter light detection and ranging (lidar) system developed for monitoring air quality environmental compliance regarding particulate matter (PM_k) generated from off-road use of wheeled and tracked vehicles as part of the SERDP (Strategic Environmental Research and Development Program) Measurement and Modeling of Fugitive Dust Emission from Off-Road DoD Activities program.

CELiS is small, lightweight and easily transportable for quick setup and measurement of PM_k concentration and emissions. CELiS operates in a biaxial configuration at the 1.5μm eyesafe wavelength with a working range of better than 6 km and range …

Gradient Projection For Interrupted Sar Using The Polar Format Algorithm, Ross Deming, Chad Knight, Jake Gunther

Space Dynamics Laboratory Publications

We present an efficient and computationally simple approach for synthetic aperture radar (SAR) imaging in cases when the radar data have gaps, due to missing pulses and/or notches in the frequency band. Our method is a simple variation of gradient projection, in which the search path in each iteration is obtained by projecting the negative-gradient of the L1 norm onto a hyper-plane defining solutions which are consistent with the data. The computations are not complicated since the L1 gradient is simply equal to the sign() of the pixels in the image. Computational efficiency is obtained by incorporating the polar format …

Small Swap 3d Imaging Flash Ladar For Small Tactical Unmanned Air Systems, Alan Bird, Scott A. Anderson, Michael Wojcik, Scott E. Budge

Space Dynamics Laboratory Publications

The Space Dynamics Laboratory (SDL), working with Naval Research Laboratory (NRL) and industry leaders Advanced Scientific Concepts (ASC) and Hood Technology Corporation, has developed a small SWAP (size, weight, and power) 3D imaging flash ladar (LAser Detection And Ranging) sensor system concept design for small tactical unmanned air systems (STUAS). The design utilizes an ASC 3D flash ladar camera and laser in a Hood Technology gyro-stabilized gimbal system. The design is an autonomous, intelligent, geo-aware sensor system that supplies real-time 3D terrain and target images. Flash ladar and visible camera data are processed at the sensor using a custom digitizer/frame …

Clutter Suppression Interferometry System Design And Processing, Chad Knight, Ross Deming, Jake Gunther

Space Dynamics Laboratory Publications

Clutter suppression interferometry (CSI) has received extensive attention due to its multi-modal capability to detect slow-moving targets, and concurrently form high-resolution synthetic aperture radar (SAR) images from the same data. The ability to continuously augment SAR images with geo-located ground moving target indicators (GMTI) provides valuable real-time situational awareness that is important for many applications. CSI can be accomplished with minimal hardware and processing resources. This makes CSI a natural candidate for applications where size, weight and power (SWaP) are constrained, such as unmanned aerial vehicles (UAVs) and small satellites applications.

This paper will discuss the theory for optimal CSI …

Demonstration Of Co2 Ch4 And Pm Detection Using Differentia Absorption Lidar (Dial) Development Of Advanced Air Monitoring Technology For Alberta, Michael Wojcik, Blake Crowther, Robert Lemon, Prasad Valupadas, Long Fu, Bonnie Leung, Zhang Yang, Quamrul Huda, Allan Chambers

Space Dynamics Laboratory Publications

Rapid expansion of the oil and gas industry in Alberta, including the oil sands, has challenged the Alberta Government to keep pace in its efforts to monitor and mitigate the environmental impacts of development. The limitations of current monitoring systems has pushed the provincial government to seek out advanced sensing technologies such as satellite imagery and laser based sensors. The Space Dynamics Laboratory (SDL) of Utah State University, in cooperation with Alberta Environmental Monitoring, Evaluation and Reporting Agency (AEMERA), has developed North America’s first mobile differential absorption lidar (DIAL) system designed specifically for emissions measurement. This instrument is housed inside …

Techno-Economic Feasibility And Life Cycle Assessment Of Dairy Effluent To Biofuel Via Hydrothermal Liquefaction, Hailey M. Summers

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Delactosed whey permeate (delac) is a low valued by-product in the dairy industry with 90 million tons annually disposed of worldwide. Upgrading delac to bioproducts, specifically biofuel, has been demonstrated at laboratory scale through yeast fermentation. However, the large-scale environmental impact and economic feasibility of this process is yet to be quantified. Further research, focused on evaluating the sustainability, scalability and economic feasibility of the fermentation pathway, directs research and development to move the technology towards commercialization. The enclosed research incorporates biological experimentation with engineering systems modeling to evaluate the large-scale environmental impacts and economic feasibility of generating bioproducts from …

Methods Of Processing Kenaf Chopped Strand Mats For Manufacturing Test Specimens And Composite Structures, Joshua W. Heil

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Every year in the United States, 10 to 11 million vehicles reach the end of their life cycle. Nearly all of these go to a recycling facility. After the recycling process is complete an average of 25% of each vehicle, by weight, goes to waste. This demonstrates the need to use natural fibers in parts that could be recycled, like parts that can be made from kenaf. There are many reasons to consider using natural/bio-fiber composites (bio-composites). These reasons include human health and environmental factors as well as advantages that natural fibers have over fiberglass, such as: lower costs and …

Computational Fluid Dynamics Simulations Of Oscillating Wings And Comparison To Lifting-Line Theory, Megan Keddington

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Computational fluid dynamics (CFD) analysis was performed in order to compare the solutions of oscillating wings with Prandtl’s lifting-line theory. Quasi-steady and steady-periodic simulations were completed using the CFD software Star-CCM+. Quasi-steady simulations were completed for both twodimensional and three-dimensional setups. The steady-periodic simulations were only performed using a three-dimensional setup. The simulations were performed for nine separate frequencies in a pure plunging setup. An additional four simulations were then completed using a setup of combined pitching and plunging at four separate frequencies. Results from the CFD simulations were compared to the quasi-steady lifting-line solution in the form of the …

Direct Electrical Arc Ignition Of Hybrid Rocket Motors, Michael I. Judson Jr.

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Hybrid rockets motors provide distinct safety advantages when compared to traditional liquid or solid propellant systems, due to the inherent stability and relative inertness of the propellants prior to established combustion. As a result of this inherent propellant stability, hybrid motors have historically proven difficult to ignite. State of the art hybrid igniter designs continue to require solid or liquid reactants distinct from the main propellants. These ignition methods however, reintroduce to the hybrid propulsion system the safety and complexity disadvantages associated with traditional liquid or solid propellants. The results of this study demonstrate the feasibility of a novel direct …

Parameterized Least-Squares Attitude History Estimation And Magnetic Field Observations Of The Auroral Spatial Structures Probe, Ryan J. Martineau

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

As charged particles from the Sun enter the Earth’s atmosphere and create the aurora borealis (Northern lights) and aurora australis (Southern lights), energy is transferred to the atmosphere. In order to better understand the energy transfer processes, the Auroral Spatial Structures Probe rocket was launched to make measurements in the active aurora. Several payloads were deployed by the rocket, each with sensors to measure the magnetic field and the electric field so that the way they change over time and in different positions could be observed. The measurements require accurate knowledge of the spacecraft orientation, and to that end this …

High Regression Rate Hybrid Rocket Fuel Grains With Helical Port Structures, Sean D. Walker

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Hybrid Rockets are popular in the aerospace industry due to their storage safety, simplicity, and controllability during rocket motor burn. However, they produce fuel regression rates typically 25% lower than solid fuel motors of the same thrust level. These lowered regression rates produce unacceptably high oxidizer-to-fuel (O/F) ratios that produce a potential for motor instability, nozzle erosion, and reduced motor duty cycles. To achieve O/F ratios that produce acceptable combustion charactersitics, traditional cylindrical fuel ports are fabricated with very long length-to-diameter ratios to increase the total burning area. these high aspect ratios produce further reduced fuel regression rate and trust …

A Neural Network Approach To Fault Detection In Spacecraft Attitude Determination And Control Systems, John N. Schreiner

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

CubeSats are employed in a variety of missions as scientific platforms, low-cost technology demonstrators, and in the future, they will conduct service missions as part of larger satellite constellations. CubeSat ADCS designers today are being tasked with designing to ever increasing accuracy requirements. The ability to hold those requirements rests with the attitude control system being robust enough and able to sufficiently respond to changes in the control environment. The need for greater control autonomy is then evident in the need for these systems to be able to react independently to changes in the system dynamics and to identify and …

A Radio Frequency Beacon Receiver For Detection Of Ionospheric Scintillation, Tim Neilsen, Don Thompson, Steve Higley, Todd Parris, Jake Gunther

Space Dynamics Laboratory Publications

Radio Frequency Beacon Receiver

• What is RFBR?
• A low-cost, ground-based beacon receiver
• Producing ionospheric parameters:
• Total Electron Content (TEC) 
• Amplitude scintillation (S4)
• Phase scintillation (σ_φ)
• Using COTS RF hardware and Software Defined Radios (SDRs) 
• Advanced algorithms and software

Particulate Matter Emission Estimates From Agricultural Spring Tillage Operations Using Lidar And Inverse Modeling, Kori D. Moore, Michael D. Wojcik, Randal S. Martin, Christian C. Marchant, Derek S. Jones, William J. Bradford, Gail E. Bingham, Richard L. Pfeiffer, John H. Prueger, Jerry L. Hatfield

Space Dynamics Laboratory Publications

Particulate matter (PM) emissions from a typical spring agricultural tillage sequence and a strip-till conservation tillage sequence in California’s San Joaquin Valley were estimated to calculate the emissions control efficiency (η) of the strip-till conservation management practice (CMP). Filter-based PM samplers, PM-calibrated optical particle counters (OPCs), and a PM-calibrated light detection and ranging (lidar) system were used to monitored upwind and downwind PM concentrations. Emission rates were estimated through inverse modeling coupled with the filter and OPC measurements and through applying a mass balance to the PM concentrations derived from lidar data. Sampling irregularities and errors prevented the estimation of …

A Low-Cost, Software Defined, Ground-Based Radio Frequency Beacon Receiver (Rfbr) For Measuring Ionosphere Tec And Amplitude And Phase Scintillation, Jacob Gunther, Chad Fish, Charles Swenson, Tim Neilsen, Brent Haslem, Bryan Hansen, Kelby Davis, Steve Higley, Todd Parris, Don Thompson, Charles Rino, Keith Groves

Space Dynamics Laboratory Publications

By monitoring the effects of the ionosphere on multiple space originating radio frequency (RF) beacons, characterizing parameters can be derived which can then be ingested into global assimilative models to improve ionospheric specification and to estimate ionosphere-induced degradation of communication and navigation signals across the electromagnetic spectrum. This paper describes the requirements, design and construction of a ground-based beacon receiver for measuring total electron concentration and amplitude and phase scintillation of the ionosphere. The design achieves very low cost by using the latest in commercial RF and software defined radio technology. The receiver can simultaneously observe three tones spanning ultra-high …

Microgravity Testing Of A Phase Change Reference On The International Space Station, T. Shane Topham, Gail E. Bingham, Harri Latvakoski, Igor Podolski, Vladimir S. Sychev, Andre Burdakin

Space Dynamics Laboratory Publications

Orbital sensors to monitor global climate change during the next decade require low drift rates for onboard thermometry, which is currently unattainable without on-orbit recalibration. Phase change materials (PCM), such as those that make up the ITS-90 standard, are seen as the most reliable references on the ground and could be good candidates for orbital recalibration. Space Dynamics Lab (SDL) has been developing miniaturized phase change references capable of deployment on an orbital blackbody for nearly a decade. To determine if and how microgravity will affect the phase transitions, SDL conducted experiments with ITS-90 standard material (gallium, Ga) on the …

Characterizing Noise Trends Of The Cross-Track Infrared Sounder (Cris), Bryce Walker, Mark Esplin, Ben Esplin, Deron Scott

Space Dynamics Laboratory Publications

Outline

• CrIS Summary

• Noise characterization process

• Noise trending results

• Recent Changes

• Conclusions

Dcgs: Image Processing, Screening, & Product Distribution Solution, Space Dynamics Laboratory

Space Dynamics Laboratory Publications

SCALABLE, CROSS-PLATFORM SOLUTION FOR NEAR REAL-TIME IMAGE PROCESSING, SCREENING, & PRODUCT DISTRIBUTION

SDL provides the Distributed Common Ground System (DCGS) community with a powerful image processing, screening, and product distribution solution by combining a ground station with the VANTAGE™ tactical intelligence software suite and the Sky Lynx data link interface hardware. This system's cost-effectiveness is achieved through the use of flexible and robust hardware configurations that enable the customer to scale the system to their DCGS program needs.

Buckling Instability Of Crown Sealing, J. O. Marston, Mohammad M. Mansoor, Tadd T. Truscott, S. T. Thoroddsen

Mechanical and Aerospace Engineering Faculty Publications

Despite the scholarly fascination with water entry of spheres for well over a century,¹ we present a new observation, namely, the crown-buckling instability. This instability is characterized by striations appearing near the top of the crown walls just prior to the surface seal, as shown in Fig. 1(a). The crown wall collapses inward due to the pressure differential across the wall created by the moving air in the wake of the sphere and surface tension within the crown. Since the rate of collapse is faster than that at which fluid drains out from the neck region, fluid collects into …

High Regression Rate Hybrid Rocket Fuel Grains With Helical Port Structures, Stephen A. Whitmore, Sean D. Walker, Daniel P. Merkley, Mansour Sobbi

Mechanical and Aerospace Engineering Faculty Publications

Results froma development campaign, where modern additive manufacturing methods are used to fabricate hybrid rocket fuel grains with embedded helical ports, are presented. The fuel grains were constructed from acrlyonitrile butadiene styrene using commercially available three-dimensional printer feedstockmaterial.Gaseous oxygen is used as the oxidizer for this test campaign.When compared to cylindrical fuel ports, significant increases in fuel regression rates were observed, and these increases in regression rate diminished with time as the helical fuel port burns to become progressivelymore cylindrical. Comparisons to the helical pipe flow skin friction correlation developed by Mishra and Gupta indicate that increased skin friction only …

Matryoshka Cavity, Randy Craig Hurd, T. Fanning, Zhao Pan, C. Maybey, Kyle G. Bodily, Kip Schafer Hacking, Nathan B. Spiers, Tadd T. Truscott

Mechanical and Aerospace Engineering Faculty Publications

When a water droplet impacts a free surface with sufficient velocity, the momentum transfer results in the formation of a hemispherical cavity expanding radially from the point of impact.¹ This cavity continues to expand until the kinetic energy is completely converted to potential energy (Fig. 1(a)).² Pumphrey and Elmore equated the potential energy of this subsurface cavity with the kinetic energy of the impacting droplet, concluding that the magnitude of the cavity radius is proportional to impact velocity and droplet diameter.³

Generating Technical Data For Strategic Source Of Repair (Ssor) & Source Of Repair Assignment Process (Sorap), Brent A. Carlsen

Space Dynamics Laboratory Publications

SDL Presentation on SSOR and SORAP Technical Data

Potential Airborne Optical Contributions To The European Phased Adaptive Approach (Epaa) For Missile Defense, Garry Schnelzer, Sean Collins, Scott Hansen, Joe Kristl

Space Dynamics Laboratory Publications

Outline

• European Phased Adaptive Approach (EPAA)
• Airborne Optical Sensor’s Contribution and Coverage
• Notional Airborne Optical Sensor and Performance
• Recommendations

Ammonia Measurements And Emissions Estimates From A California, Usa Dairy Using Both Point And Remote Sensors, Kori Moore, Emyrei Young, Cassi Gurell, Michael Wojcik, Randall Martin, Gail Bingham, Richard Pfeiffer, John Prueger, Jerry Hatfield

Space Dynamics Laboratory Publications

Background

• Question: How much does a US open lot dairy contribute to local and regional PM loadings?
• • Primary PM: dust, combustion sources
  • Secondary PM: NH₃, NO_x, SO_x, VOCs
  • Climate, housing, manure management, and other confounding factors
• Emissions measurements are required to help answer this question
• Study Objective:
  • Characterize PM_2.5, PM₁₀, TSP, and gaseous NH₃concentrations, fluxes, and emissions from a commercial dairy using both point and remote sensing techniques
  • Results reported in:
    • Marchant et al. 2011. Estimation of dairy particulate matter emissions from a California dairy …Trans. ASABE …

Feasibility Considerations For A Long-Range Passive Vibrometer, Alan Marchant, Chad Fish, Jie Yao, Phillip Cunio, Wellesley Pereira

Space Dynamics Laboratory Publications

Hypertemporal imaging enables the long-range characterization of vibration modes and amplitudes of a passively illuminated structure. The vibration signature arises from modulation of the bidirectional reflection distribution function (BRDF) as the surface normal oscillates with respect to a fixed, directional source. This paper considers the instrument design characteristics and environmental factors that limit passive vibrometer performance including BRDF angle sensitivity, receiver spatial resolution, interference from atmospheric scintillation, and intrinsic detector performance. It also identifies a sensor architecture that is capable of characterizing surface vibration at amplitudes below 1 mrad rms and discuss detector technology that can further improve long-range vibrometer …