Aerospace Engineering Commons^™

Evaluation Of Strain Distortion Correction Protocol Using Scanning Electron Microscopy And Digital Image Correlation, Alexandra Mallory, Alberto Mello, Michael Sangid

The Summer Undergraduate Research Fellowship (SURF) Symposium

Scanning electron microscopy in combination with digital image correlation (SEM-DIC) is a useful technique for measuring strain in materials at the micro-scale. In particular, it can be used to identify micro-scale strain localizations that are the precursor to material failure. While SEM produces high resolution images of the microstructure, the images also contain a large amount of distortion that, during DIC, will result in distorted strain values that require correction. In this project, a nickel-based alloy underwent cyclic mechanical fatigue at three different high temperatures to a targeted maximum strain. Scanning electron microscopy imaging was done on a 200x150μm area …

Metamodels Of Residual Stress Buildup For Machining Process Modeling, Stuart B. Mccrorie, Michael Sangid

The Summer Undergraduate Research Fellowship (SURF) Symposium

In the process of machining materials, stresses, called residual stresses, accumulate in the workpiece being machined that remain after the process is completed. These residual stresses can affect the properties of the material or cause part distortion, and it is important that they be calculated to prevent complications from arising due to the residual stresses. However, these calculations can be incredibly computationally intensive, and thus other methods are needed to predict the residual stresses in materials for quick decision-making during machining. By using metamodels - a method of representing data where few data points exist - we can achieve an …

High Strain Rate Experiments Of Energetic Material Binder, Roberto Rangel Mendoza, Michael Harr, Weinong Chen

The Summer Undergraduate Research Fellowship (SURF) Symposium

Energetic materials, in particular HMX, is widely used in many applications as polymer bonded explosives (PBX) and rocket propellant. However, when damaged, HMX is known to be an unstable substance which renders it a hazardous material and in some cases unreliable. Finding critical mechanical conditions at high rates that render various forms of energetic materials as unreliable would be vital to understand the effects that vibrations and compression forces have on energetic materials. A better understanding would enable the ability to develop improvements in the manufacturing of PBX and rocker propellant. The method utilized to evaluate the mechanical properties of …

An Experimental Investigation Of Self-Excited Combustion Dynamics In A Single Element Lean Direct Injection (Ldi) Combustor, Rohan M. Gejji

Open Access Dissertations

The management of combustion dynamics in gas turbine combustors has become more challenging as strict NOx/CO emission standards have led to engine operation in a narrow, lean regime. While premixed or partially premixed combustor configurations such as the Lean Premixed Pre-vaporized (LPP), Rich Quench Lean burn (RQL), and Lean Direct Injection (LDI) have shown a potential for reduced NOx emissions, they promote a coupling between acoustics, hydrodynamics and combustion that can lead to combustion instabilities. These couplings can be quite complex, and their detailed understanding is a pre-requisite to any engine development program and for the development of predictive capability …

Particle Modeling Of Non-Equilibrium Field Emission Driven Rf Microplasmas, Siva Sashank Tholeti

Open Access Dissertations

Non-equilibrium microplasmas at atmospheric pressures have been investigated for active flow control, micropropulsion and electronic display applications to name a few. The operational voltages for these microplasmas are on the order of kilovolts. When the electric field at the electrodes reaches GV/m or tens of GV/m either due to reduced interelectrode spacing and surface irregularities or due to carefully designed nanostructures on the electrodes, quantum processes such as field emission and field ionization come into effect. These can potentially reduce the operational voltages of microplasma devices by an order of magnitude. Due to the rarefied and non-equilibrium nature of these …

Applications Of The Homotopy Analysis Method To Optimal Control Problems, Shubham Singh

Open Access Theses

Traditionally, trajectory optimization for aerospace applications has been performed using either direct or indirect methods. Indirect methods produce highly accurate solutions but suer from a small convergence region, requiring initial guesses close to the optimal solution. In past two decades, a new series of analytical approximation methods have been used for solving systems of dierential equations and boundary value problems.

The Homotopy Analysis Method (HAM) is one such method which has been used to solve typical boundary value problems in nance, science, and engineering. In this investigation, a methodology is created to solve indirect trajectory optimization problems using the Homotopy …

Numerical Methods For Low-Thrust Trajectory Optimization, Robert E. Pritchett

Open Access Theses

The spacecraft trajectory design process frequently includes the optimization of a quantity of importance such as propellant consumption or time of flight. A variety of methods for trajectory optimization are available, however the efficiency of an approach is dependent on the problem scenario it is applied to. Indirect and direct trajectory optimization methods are examined in this investigation with the goal of assessing the characteristics of each approach, and thereby determining the problem scenarios each is best suited for. Insight is gained from application of each optimization method to three sample problems; a circular-to-circular orbit transfer as well as two …

Fleet Level Environmental Evaluation Of Emission Taxing Scheme And Biofuel: A Combined Optimization And Multi-Actor Approach, Hsun Chao

Open Access Theses

The Fleet Level Environmental Evaluation Tool (FLEET) can assess environmental impacts of various levels of technology and environmental policies on fleet-level carbon emissions and airline operations. FLEET consists of different models to mimic airlines' behaviors and a resource allocation problem to simulate airlines' aircraft deployments on their networks. Additionally, the Multiactors Biofuel Model can conduct biofuel life-cycle assessments and evaluate biofuel developments and assess the effects of new technology on biofuel production costs and unit carbon emissions as well.

In addition, the European Union (EU) initiated an Emission Trading Scheme (ETS) in the European Economic Area, while International Civil Aviation …

Ab Initio Based State Specific Modeling Of N2+O System, Han Luo

Open Access Theses

Nitrogen and atomic oxygen play an important role in high temperature gas systems. Their Zeldovich reaction product nitric oxide not only affects aerothermal loads and emissions of hypersonic vehicles, but also has the possibility to influence the efficiency of hypersonic propulsion. Atomic oxygen induced nitrogen dissociation is another reaction mechanism of the N2+O system. However, due to the difficulty of conducting ground tests, there are no experimental data for this reaction now. Thermo-chemical nonequilibrium could make the problem more difficult since experiments could only track macroscopic gas properties instead of internal energy distribution. On the other hand, current reaction and …

Supporting Space Systems Design Via Systems Dependency Analysis Methodology, Cesare Guariniello

Open Access Dissertations

The increasing size and complexity of space systems and space missions pose severe challenges to space systems engineers. When complex systems and Systems-of-Systems are involved, the behavior of the whole entity is not only due to that of the individual systems involved but also to the interactions and dependencies between the systems. Dependencies can be varied and complex, and designers usually do not perform analysis of the impact of dependencies at the level of complex systems, or this analysis involves excessive computational cost, or occurs at a later stage of the design process, after designers have already set detailed requirements, …

Information Inference For Cyber-Physical Systems With Application To Aviation Safety And Space Situational Awareness, Sangjin Lee

Open Access Dissertations

Due to the rapid advancement of technologies on sensors and processors, engineering systems have become more complex and highly automated to meet ever stringent performance and safety requirements. These systems are usually composed of physical plants (e.g., aircraft, spacecraft, ground vehicles, etc.) and cyber components (e.g., sensing, communication, and computing units), and thus called as Cyber-Physical Systems (CPSs). For safe, efficient, and sustainable operation of a CPS, the states and physical characteristics of the system need to be effectively estimated or inferred from sensing data by proper information inference algorithms. However, due to the complex nature of the interacting multiple-heterogeneous …

Physical Properties, Evaporation And Combustion Characteristics Of Nanofluid-Type Fuels, Saad Tanvir

Open Access Dissertations

Nanofluids are liquids with stable suspension of nanoparticles. Limited studies in the past have shown that both energetic and catalytic nanoparticles once mixed with traditional liquid fuels can be advantageous in combustion applications, e.g., increased energy density and shortened ignition delay. Contradictions in existing literature, scarcity of experimental data and lack of understanding on how the added nanoparticles affect the physical properties as well as combustion characteristics of the resulting fuel motivated us to launch a detailed experimental and theoretical investigation.

The surface tension of ethanol and n-decane based nanofluid fuels containing suspended nanoparticles were measured using the pendant drop …

Analytical Methods For Gravity-Assist Tour Design, Nathan J. Strange

Open Access Dissertations

This dissertation develops analytical methods for the design of gravity-assist space- craft trajectories. Such trajectories are commonly employed by planetary science missions to reach Mercury or the Outer Planets. They may also be used at the Outer Planets for the design of science tours with multiple flybys of those planets’ moons. Recent work has also shown applicability to new missions concepts such as NASA’s Asteroid Redirect Mission.

This work is based in the theory of patched conics. This document applies rigor to the concept of pumping (i.e. using gravity assists to change orbital energy) and cranking (i.e. using gravity assists …

Implementing And Testing A Panel-Based Method For Modeling Acoustic Scattering From Cfd Input, S. Hales Swift

Open Access Dissertations

Exposure of sailors to high levels of noise in the aircraft carrier deck environment is a problem that has serious human and economic consequences. A variety of approaches to quieting exhausting jets from high-performance aircraft are undergoing development. However, testing of noise abatement solutions at full-scale may be prohibitively costly when many possible nozzle treatments are under consideration. A relatively efficient and accurate means of predicting the noise levels resulting from engine-quieting technologies at personnel locations is needed. This is complicated by the need to model both the direct and the scattered sound field in order to determine the resultant …

Estimation Of Performance Airspeeds For High-Bypass Turbofans Equipped Transport-Category Airplanes, Nihad E. Daidzic

Journal of Aviation Technology and Engineering

Conventional Mach-independent subsonic drag polar does not replicate the real airplane drag characteristics exactly and especially not in the drag-divergence region due to shock-induced transonic wave drag. High-bypass turbofan thrust is a complicated function of many parameters that eludes accurate predictions for the entire operating envelope and must be experimentally verified. Fuel laws are also complicated functions of many parameters which make optimization and economic analysis difficult and uncertain in the conceptual design phase. Nevertheless, mathematical models and predictions have its important place in aircraft development, design, and optimization. In this work, airspeed-dependent turbofan thrust and the new fuel-law model …

A Cross-Sectional And Mixed-Method Assessment Of Safety Culture And Safety Climate At A Regional Airline, Micah S. Walala

Open Access Dissertations

The researcher applied a mixed methods approach to conduct a cross-sectional assessment of the safety culture, safety climate, and SMS at a regional airline in the United States. Data collection techniques were comprised of interview, on-line-survey, and a focus group activity. Participants in the current study were maintenance technicians, flight attendants, dispatchers, pilots, and managers. Results indicated significant differences of perception of safety climate, safety culture, and Safety Management System between the maintenance technicians and flight attendants. The length of time a participant had worked at the subject airline and age of the participant appeared to be significant factors of …

Preliminary Design Tools In Turbomachinery: Non-Uniformly Spaced Blade Rows, Multistage Interaction, Unsteady Radial Waves, And Propeller Horizontal-Axis Turbine Optimization, Yujun Leng

Open Access Dissertations

Turbomachinery flow fields are inherently unsteady and complex which makes the related CFD analyses computationally intensive. Physically based preliminary design tools are desirable for parametric studies early in the design stage, and to provide deep physical insight and a good starting point for the later CFD analyses. Four analytical/semi-analytical models are developed in this study: 1) a generalized flat plate cascade model for investigating the unsteady aerodynamics of a blade row with non-uniformly spaced blades; 2) a multistage interaction model for investigating rotor-stator interactions; 3) an analytical solution for quantifying the impeller wake convection and pressure wave propagating between a …

Incorporation Of Gnss Multipath To Improve Autonomous Rendezvous, Docking And Proximity Operations In Space, Benjamin W. Ashman

Open Access Dissertations

Automated rendezvous and docking (AR&D;) operations are important for many future space missions, such as the resupply of space stations, repair and refueling of large satellites, and active removal of orbital debris. These operations depend critically on accurate, real-time knowledge of the relative position and velocity between two space vehicles. Unfortunately, Global Navigation Satellite System (GNSS) capabilities remain severely limited in close proximity to large space structures due to significant multipath effects and signal blockage. Although GNSS is used for the initial stages of approach, other instruments such as laser, radar and vision-based systems, are required to augment GNSS during …

Transfers To A Gravitational Saddle Point: An Extended Mission Design Option For Lisa Pathfinder, Andrew D. Cox

Open Access Theses

Any possible LISA Pathfinder extended mission will immediately follow the primary mission after completion of scientific observations and technical demonstrations in a Sun-Earth L1 libration point orbit. One extended mission concept with scientific appeal is a spacecraft path that includes multiple encounters with a gravitational equilibrium point. This point, also termed a saddle point, exists where the total gravitational acceleration sums to zero and is distinct from the five Lagrange points in the three-body problem. This investigation seeks a strategy to design such a path subject to a variety of constraints. Periodic, quasi-periodic, and manifold structures are explored to …

Phase Of Flight Identification In General Aviation Operations, Valentine Pascale Goblet

Open Access Theses

Identifying phases of flight in General Aviation can help in identifying safety events, which are events which may result in the aircraft being in a hazardous state. Unlike commercial operations that have well-defined phases of flight such as taxi, takeoff, climb, cruise, descent, approach, and landing, GA missions have more hard-to-identify phases of flight. For example, pilot training missions can involve multiple “touch-and-go” maneuvers, which make it difficult to define a distinct cruise phase during the patterns. Here, we present an algorithm to automatically identifying phases of flight in GA. The method includes an algorithm to tailor the phase of …

Dynamic Sensor Tasking And Imm Ekf Estimation For Tracking Impulsively Maneuvering Satellites, Arthur A. Lace

Open Access Theses

In order to efficiently maintain space situational awareness, care must be taken to optimally allocate expensive observation resources. In most situations the available sensors capable of tracking spacecraft have their time split between many different monitoring responsibilities. Tracking maneuvering spacecraft can be especially difficult as the schedule of maneuvers may not be known and will often throw off previous orbital models. Effectively solving this tasking problem is an ongoing focus of research in the area of space situational awareness. Most methods of automated tasking do not make use of interacting multiple model extended Kalman filter techniques to better track satellites …

An Experimental Comparison Of Diffuser Designs In A Centrifugal Compressor, Cam-Tu Jeanne Methel

Open Access Theses

The objective of this investigation was to compare the effects of two different diffuser vane geometries on the performance of a centrifugal compressor. Vaned diffusers are commonly used in aeroengines because they can achieve higher pressure recoveries than vaneless diffusers of similar size. Improving the diffuser’s pressure recovery and effectiveness can result in overall compressor performance benefits that are sought out by engine manufacturers looking to improve overall engine efficiency. An airfoil vane was tested and compared to a baseline wedge diffuser in the Purdue CSTAR research facility, where the centrifugal compressor used for this study is intended to be …

Unsupervised Learning Framework For Large-Scale Flight Data Analysis Of Cockpit Human Machine Interaction Issues, Abhishek B. Vaidya

Open Access Theses

As the level of automation within an aircraft increases, the interactions between the pilot and autopilot play a crucial role in its proper operation. Issues with human machine interactions (HMI) have been cited as one of the main causes behind many aviation accidents. Due to the complexity of such interactions, it is challenging to identify all possible situations and develop the necessary contingencies. In this thesis, we propose a data-driven analysis tool to identify potential HMI issues in large-scale Flight Operational Quality Assurance (FOQA) dataset. The proposed tool is developed using a multi-level clustering framework, where a set of basic …

Tadpole Orbits In The L4/L5 Region: Construction And Links To Other Families Of Periodic Orbits, Alexandre G. Van Anderlecht

Open Access Theses

The equations of motion in the Circular Restricted Three-Body Problem (CR3BP) allow five equilibrium solutions, that is, the Lagrange or libration points. Two of the five equilibrium solutions are the triangular or equilateral libration points, L4 and L 5. As the secondary gravitational body moves in its orbit about the larger mass, L4 and L5 lead and trail the secondary by 60 degrees, respectively. This investigation focuses on periodic solutions in the vicinity of the triangular libration points, specifically horseshoe and tadpole orbits. Horseshoe orbits are symmetric periodic solutions in the plane of primary motion encompassing both …

A Transfer Network Linking Earth, Moon, And The Triangular Libration Point Regions In The Earth-Moon System, Lucia R. Capdevila

Open Access Dissertations

In the near future, several space applications in the Earth-Moon system may require a spacecraft to hold a stable motion, but the transfer trajectory infrastructure to access such stable motions has not been fully investigated yet. The triangular libration points, L 4and L5, in the Earth-Moon system have long been thought of as ideal locations for a communications satellite. Recently, Distant Retrograde Orbits (DROs) and Near-Rectilinear Halo Orbits (NRHOs) near the Moon have been identified as motion of interest for manned and unmanned missions with a focus on operations in cislunar space. The triangular libration points, as well as …

Coupled Orbit-Attitude Mission Design In The Circular Restricted Three-Body Problem, Davide Guzzetti

Open Access Dissertations

Trajectory design increasingly leverages multi-body dynamical structures that are based on an understanding of various types of orbits in the Circular Restricted Three-Body Problem (CR3BP). Given the more complex dynamical environment, mission applications may also benefit from deeper insight into the attitude motion. In this investigation, the attitude dynamics are coupled with the trajectories in the CR3BP. In a highly sensitive dynamical model, such as the orbit-attitude CR3BP, periodic solutions allow delineation of the fundamental dynamical structures. Periodic solutions are also a subset of motions that are bounded over an infinite time-span (assuming no perturbing factors), without the necessity to …

A Study On Flow Development In An Apu-Style Inlet And Its Effect On Centrifugal Compressor Performance, Fangyuan Lou

Open Access Dissertations

The objectives of this research were to investigate the flow development inside an APU-style inlet and its effect on centrifugal compressor performance. The motivation arises from the increased applications of gas turbine engines installed with APU-style inlets such as unmanned aerial vehicles, auxiliary power units, and helicopters. The inlet swirl distortion created from these complicated inlet systems has become a major performance and operability concern. To improve the integration between the APU-style inlet and gas turbine engines, better understanding of the flow field in the APU-style inlet and its effect on gas turbine is necessary.

A research facility for the …

Dynamic Transverse Debondong Of A Single S-2 Fiber, Stephen E. Levine

Open Access Theses

Fiber reinforced composites are becoming increasingly common due to their high strength to weight ratios as compared to more conventional materials. Along with this increased used comes the need to have a higher level of understanding of the material characteristics. Specifically, the interface between the fiber and matrix is of particular interest. Loss of adhesion at this interface, known as debonding, can greatly decrease material strength. There has been significant research into debdonding phenomena at low strain rates. However, there is still a need for further insight at higher strain rates. In addition, given the opacity of many epoxy resins, …

Design Of Elastic Metamaterials, Yu-Chi Su

Open Access Dissertations

This study focused on the design and fabrication of a double negativity and three broadband single negativity elastic metamaterials using a 3D printer. We investigated dispersion curves and dynamic material properties of the metamaterials. Negative phase velocity in the double negativity metamaterial was also demonstrated.

For metamaterials with single negativity, three types of broadband metamaterials were designed from parametric studies. A comparison showed that using frame bending/stretching mode is more effective than applying beam bending mode to broaden bandgap. Furthermore, it is found that adding internal resonant components could enlarge the bandgap. The single negativity metamaterials were validated by numerical …

The Impact Of Crystal Morphology On The Thermal Responses Of Ultrasonically-Excited Energetic Materials, J. K. Miller, J. O. Mares, I. E. Gunduz, Steven F. Son, Jeff Rhoads

Purdue Energetics Research Center Articles

The ability to detect explosive materials may be significantly enhanced with local increases in vapor pressure caused by an elevation of the materials'temperature. Recently, ultrasonic excitation has been shown to generate heat within plastic-bonded energetic materials. To investigate the impact of crystal morphology on this heating, samples of elastic binder are implanted with single ammonium perchlorate crystals of two distinct shape groups. Contact piezoelectric transducers are then used to excite the samples at ultrasonicfrequencies. The thermal responses of the crystals are recorded using infrared thermography, and the rate of heating is estimated. Surface temperature increases up to 15 °C …