Open Access. Powered by Scholars. Published by Universities.®

Aerospace Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

Air Force Institute of Technology

Discipline
Keyword
Publication Year
Publication
Publication Type

Articles 241 - 270 of 1674

Full-Text Articles in Aerospace Engineering

Experimental And Computational Analysis Of Progressive Failure In Bolted Hybrid Composite Joints, John S. Brewer Dec 2020

Experimental And Computational Analysis Of Progressive Failure In Bolted Hybrid Composite Joints, John S. Brewer

Theses and Dissertations

Composite materials are strong, lightweight, and stiff making them desirable in aerospace applications. However, a practical issue arises with composites in that they behave unpredictably in bolted joints, where damage and cracks are often initiated. This research investigated a solution to correcting the problem with composite bolted joints. A novel hybrid composite material was developed, where thin stainless steel foils were placed between and in place of preimpregnated composite plies during the cure cycle to reinforce stress concentrations in bolted joints. This novel composite was compared to control samples experimentally in quasi-static monotonic loading in double shear configuration in 9-ply …

Go to article

Assessing Observer Stations For Cislunar Space Domain Awareness, Michael S. Rosenof Dec 2020

Assessing Observer Stations For Cislunar Space Domain Awareness, Michael S. Rosenof

Theses and Dissertations

With renewed worldwide interest in cislunar space, the need for reliable domain awareness in that extended region of space is clear. This investigation quantifies the suitability of several possible stations for observer satellites in cislunar space by calculating the specific irradiance each would observe as they track satellites in various realistic lunar free-return trajectories across a decade, using reflected sunlight. This investigation includes one class of free return trajectories for target satellites, eleven distinct observer stations, and three different metrics for comparing the effectiveness of each observer station or combination of observer stations for sensing targets using reflected sunlight. The …

Go to article

Electro-Optic Satellite Constellation Design Using Multi-Objective Genetic Algorithm, Yasin Tamer Dec 2020

Electro-Optic Satellite Constellation Design Using Multi-Objective Genetic Algorithm, Yasin Tamer

Theses and Dissertations

Satellite constellation design is a complex, highly constrained, and multidisciplinary problem. Unless optimization tools are used, tradeoffs must be conducted at the subsystem level resulting in feasible, but not necessarily optimal, system designs. As satellite technology advances, new methods to optimize the system objectives are developed. This study is based on the development of a representative regional remote sensing constellation design. This thesis analyses the design process of an electrooptic satellite constellation with regional coverage considerations using system-level optimization tools. A multi objective genetic algorithm method is used to optimize the constellation design by utilizing MATLAB and STK integration. Cost, …

Go to article

An Analysis Of The Benefits And Difficulties Of Aerial Magnetic Vector Navigation, Aaron J. Canciani, Christopher J. Brennan Dec 2020

An Analysis Of The Benefits And Difficulties Of Aerial Magnetic Vector Navigation, Aaron J. Canciani, Christopher J. Brennan

Faculty Publications

Recent successful flight tests have demonstrated scalar magnetic anomaly navigation to be a viable GPS-alternative navigation system. These flight tests matched magnetic field measurements to maps of the Earth's crustal magnetic field in order to navigate. Scalar magnetic navigation uses only the magnetic field intensity, not direction, in order to navigate. While it appears obvious to extend aerial magnetic navigation to use the full vector field, in practice there are substantial obstacles to doing so. This article explores the key challenges of magnetic vector navigation including current sensor limitations, lack of high frequency magnetic vector maps of the Earth's crust, …

Go to article

Specifying Space Defense Operator Interfaces Through The Application Of Cognitive Systems Engineering And Prototyping, Justin E. Oryschak Nov 2020

Specifying Space Defense Operator Interfaces Through The Application Of Cognitive Systems Engineering And Prototyping, Justin E. Oryschak

Theses and Dissertations

The Department of Defense needs better tools to support its operators as they strive to defend its space assets. The growing sophistication of anti-satellite weapons increasingly challenges the nation’s orbital communications and surveillance infrastructure. Operators face difficulties gathering useful information and dealing with the complexity of potential enemy actions. This research applied cognitive systems engineering and ecological interface design (EID) methodologies to create a prototype space mission management tool that enhances operator situation awareness and decision-making ability. Applied cognitive task analysis interviews were used to document space operator decision-making in their domain. Model-based systems engineering was applied to integrate work …

Go to article

Hexakis Icosahedron Frame-Skin Vacuum Lighter Than Air Vehicle, Brian Cranston, Anthony N. Palazotto Nov 2020

Hexakis Icosahedron Frame-Skin Vacuum Lighter Than Air Vehicle, Brian Cranston, Anthony N. Palazotto

AFIT Patents

A vacuum lighter than air vehicle (VLTAV) includes a rigid frame of rods connected together to form a hexakis icosahedron. A membrane skin covers the rigid frame and defines therewith a vessel configured to hold an internal vacuum that allows the vessel to float in the air. The plurality of rods and membrane skin have weights and dimensions that result in a neutral and/or positive buoyancy for the vessel while preventing geometric instability.

Go to article

Chronos Spacecraft With Chiron Probe: Exploration Of The Hydrosphere, Principle Satellites, Atmosphere, And Rings Of Uranus, Payton E. Pearson Sep 2020

Chronos Spacecraft With Chiron Probe: Exploration Of The Hydrosphere, Principle Satellites, Atmosphere, And Rings Of Uranus, Payton E. Pearson

Theses and Dissertations

A design reference mission using more modern technological innovations has been developed for exploration of the outer reaches of our Solar System, specifically Uranus and its system of satellites. This mission will utilize theoretical technologies mostly without regard to their current technological readiness level (TRL), though most systems have a TRL of at least 5. The primary innovations explored in this thesis are the new launch systems that provide far greater payload capacity potentially sent to anywhere in the Solar System, new Stirling-engine radioisotope thermoelectric generators (SRTGs), vastly improved data storage technologies, optimized satellite antenna relay of data using much …

Go to article

Investigation Of Factors Impacting A Helicopter Height-Velocity Diagram, Timothy A. Brown Sep 2020

Investigation Of Factors Impacting A Helicopter Height-Velocity Diagram, Timothy A. Brown

Theses and Dissertations

A dynamic helicopter model was incorporated into an optimal control problem to determine minimal landing velocities. The solutions were determined using pseudospectral collocation methods as implemented by the GPOPS-II software. These solutions were then compiled to develop a HV diagram. An HV diagram displays regions of flight based on a helicopter's airspeed and height above the ground in which a safe landing would not be possible following engine failure. The applied methodology for constructing the HV diagram reduced issues involving solution convergence that was encountered in previous research. The influence of ground effect on the dynamic model was also investigated. …

Go to article

Residual-Based Multi-Filter Methodology For All-Source Fault Detection, Exclusion, And Performance Monitoring, Juan Jurado, John F. Raquet, Christine M. Schubert Kabban Air Force Institute Of Technology, Jonathon S. Gipson Aug 2020

Residual-Based Multi-Filter Methodology For All-Source Fault Detection, Exclusion, And Performance Monitoring, Juan Jurado, John F. Raquet, Christine M. Schubert Kabban Air Force Institute Of Technology, Jonathon S. Gipson

Faculty Publications

All-source navigation has become increasingly relevant over the past decade with the development of viable alternative sensor technologies. However, as the number and type of sensors informing a system increases, so does the probability of corrupting the system with sensor modeling errors, signal interference, and undetected faults. Though the latter of these has been extensively researched, the majority of existing approaches have constrained faults to biases and designed algorithms centered around the assumption of simultaneously redundant, synchronous sensors with valid measurement models, none of which are guaranteed for all-source systems. As part of an overall all-source assured or resilient navigation …

Go to article

All-Metallic Phase Change Thermal Management Systems For Transient Spacecraft Loads, Carl R. Hartsfield, Travis E. Shelton, Brian O. Palmer, Ryan P. O'Hara Jul 2020

All-Metallic Phase Change Thermal Management Systems For Transient Spacecraft Loads, Carl R. Hartsfield, Travis E. Shelton, Brian O. Palmer, Ryan P. O'Hara

Faculty Publications

In this work, we explore the thermal properties of gallium as an effective phase change material for thermal management applications. Thermal storage and dissipation of gallium manufactured heat sinks were compared to conventional phase change heat sinks. The comparison revealed a 50-fold (80 K versus 1.5 K) potential reduction in temperature during the phase change process due to the high density, thermal conductivity, and latent heat of fusion. The gallium creates shallow thermal gradients when transiently heated, producing a nearly isothermal process. Computational estimates using lumped sum parameters were able to provide simple modeling to predict the results. Gallium based …

Go to article

Design And Test Of An Autonomy Monitoring Service To Detect Divergent Behaviors On Unmanned Aerial Systems, Loay Y. Almannaei Jun 2020

Design And Test Of An Autonomy Monitoring Service To Detect Divergent Behaviors On Unmanned Aerial Systems, Loay Y. Almannaei

Theses and Dissertations

Operation of Unmanned Aerial Vehicles (UAV) support many critical missions in the United State Air Force (USAF). Monitoring abnormal behavior is one of many responsibilities of the operator during a mission. Some behaviors are hard to be detect by an operator, especially when flying one or more autonomous vehicles; as such, detections require a high level of attention and focus to flight parameters. In this research, a monitoring system and its algorithm are designed and tested for a target fixed-wing UAV. The Autonomy Monitoring Service (AMS) compares the real vehicle or simulated Vehicle with a similar simulated vehicle using Software …

Go to article

Wind Tunnel Wake Generator, Carl Pickl, James L. Rutledge, Marc D. Polanka, Brian Crabtree, Christopher Harkless May 2020

Wind Tunnel Wake Generator, Carl Pickl, James L. Rutledge, Marc D. Polanka, Brian Crabtree, Christopher Harkless

AFIT Patents

A wake generator for placement in a wind tunnel between a wind source and a test object includes a first frame member having a first track formed thereon, where the first track has a shape including a first side that is substantially rounded and a second side that is substantially flat. The wake generator may include a mounting plate disposed within a perimeter of the first track, where the mounting plate is rotatable relative to the first frame member about a first axis. The wake generator may also include a plurality of bars slidably engaged to the mounting plate and …

Go to article

An Argument Against Satellite Resiliency: Simplicity In The Face Of Modern Satellite Design, Dax Linville, Robert A. Bettinger Apr 2020

An Argument Against Satellite Resiliency: Simplicity In The Face Of Modern Satellite Design, Dax Linville, Robert A. Bettinger

Faculty Publications

The US Air Force and the wider US government rely heavily on space-based capabilities in various orbital regimes to project national security and sovereignty. However, these capabilities are enabled by the design, launch, and operation of satellites produced with a design methodology that favors large, monolithic, and technologically exquisite space systems. Despite the ability for these satellites to provide enduring and resilient capabilities, they suffer from a woefully long acquisition process that debilitates any prospect of rapid satellite reconstitution in the event of a space war.

Go to article

Object Detection With Deep Learning To Accelerate Pose Estimation For Automated Aerial Refueling, Andrew T. Lee Mar 2020

Object Detection With Deep Learning To Accelerate Pose Estimation For Automated Aerial Refueling, Andrew T. Lee

Theses and Dissertations

Remotely piloted aircraft (RPAs) cannot currently refuel during flight because the latency between the pilot and the aircraft is too great to safely perform aerial refueling maneuvers. However, an AAR system removes this limitation by allowing the tanker to directly control the RP A. The tanker quickly finding the relative position and orientation (pose) of the approaching aircraft is the first step to create an AAR system. Previous work at AFIT demonstrates that stereo camera systems provide robust pose estimation capability. This thesis first extends that work by examining the effects of the cameras' resolution on the quality of pose …

Go to article

Relational Database Design And Multi-Objective Database Queries For Position Navigation And Timing Data, Sean A. Mochocki Mar 2020

Relational Database Design And Multi-Objective Database Queries For Position Navigation And Timing Data, Sean A. Mochocki

Theses and Dissertations

Performing flight tests is a natural part of researching cutting edge sensors and filters for sensor integration. Unfortunately, tests are expensive, and typically take many months of planning. A sensible goal would be to make previously collected data readily available to researchers for future development. The Air Force Institute of Technology (AFIT) has hundreds of data logs potentially available to aid in facilitating further research in the area of navigation. A database would provide a common location where older and newer data sets are available. Such a database must be able to store the sensor data, metadata about the sensors, …

Go to article

Alternate Materials For High-Speed Projectile Casing, Andrew W. Beard Mar 2020

Alternate Materials For High-Speed Projectile Casing, Andrew W. Beard

Theses and Dissertations

A high-speed projectile impact is a highly complex dynamic problem that can be simplified with the use of finite element analysis solvers. Abaqus/Explicit was used to evaluate the impact of various projectiles using a plane strain setup. Using a baseline stainless steel projectile, the proposed sandwich construction design was analyzed and compared to the baseline projectile. The overall goal was to see if a new composite casing could perform similarly to the simple baseline projectile. The sandwich construction used stainless steel, tungsten, and silicon-carbide reinforce aluminum as outer and inner shell materials. The core material was created using additive manufacturing …

Go to article

Investigation Of Ultem 9085 For Use In Printed Orbital Structures, William R. Gallagher Mar 2020

Investigation Of Ultem 9085 For Use In Printed Orbital Structures, William R. Gallagher

Theses and Dissertations

Additive manufacturing is revolutionizing industries ranging from medicine to space. However, the structural characteristics of plastic parts created by these methods are not as well understood as their more established counterparts. This research explored two relevant areas: how the structural characteristics of ULTEM 9085 plastic behaved after exposure to orbital conditions and the design of the cross-sectional area of a beam to be 3-D printed in microgravity based on the expected loads from the printer. To study orbital effects, ULTEM 9085 was printed into 1/4th scale ASTM D638- 14 dogbones using a Stratasys 450mc printer. These dogbones were placed in …

Go to article

Timely Near-Optimal Path Generation For An Unmanned Aerial System In A Highly Constrained Environment, Kyle J. Matissek Mar 2020

Timely Near-Optimal Path Generation For An Unmanned Aerial System In A Highly Constrained Environment, Kyle J. Matissek

Theses and Dissertations

A current challenge in path planning is the ability to efficiently calculate a near-optimum path solution through a highly-constrained environment in near-real time. In addition, computing performance on a small unmanned aerial vehicle is typically limited due to size and weight restrictions. The proposed method determines a solution quickly by first mapping a highly constrained three-dimensional environment to a two-dimensional weighted node surface in which the weighting accounts for both the terrain gradient and the vehicle's performance. The 2D surface is then discretized into triangles which are sized based upon the vehicle maneuverability and terrain gradient. The shortest feasible path …

Go to article

Flight Characteristic Verification Of The Variable Camber Compliant Wing, Sharee B. Acosta Mar 2020

Flight Characteristic Verification Of The Variable Camber Compliant Wing, Sharee B. Acosta

Theses and Dissertations

Morphing wing technology gives aircraft the ability to change wing shape to control the aircraft and flight performance characteristics. AFIT, AFRL and USU Aero Lab have collaborated to design and test a variable camber compliant wing (VCCW) on a small unmanned aerial vehicle (UAV). Flight tests demonstrated the wing performance and provided data to refine a VCCW flight simulator. Work was completed with the USU AeroLab-generated MachUp and the actual flight data to improve the simulator to provide results close to those of the actual flight test. The research provides a tool to reduce time and cost for future flight …

Go to article

Signal Quality Monitoring Of Gnss Signals Using A Chip Shape Deformation Metric, Nicholas C. Echeverry Mar 2020

Signal Quality Monitoring Of Gnss Signals Using A Chip Shape Deformation Metric, Nicholas C. Echeverry

Theses and Dissertations

The Global Navigation Satellite System continues to become deeply em-bedded within modern civilization, and is depended on for confident, accurate navigation information. High precision position and timing accuracy is typically achieved using differential processing, however these systems provide limited compensation for distortions caused by multi-path or faulty satellite hardware. Signal Quality Monitoring (SQM) aims to provide confidence in a receivers Position, Navigation, and Timing solution and to offer timely warnings in the event that signal conditions degrade to unsafe levels. The methods presented in this document focus on implementing effective SQM using low-cost Commercial Off-the-Shelf equipment, a Software Defined Radio, …

Go to article

Magslam: Aerial Simultaneous Localization And Mapping Using Earth's Magnetic Anomaly Field, Taylor N. Lee, Aaron J. Canciani Mar 2020

Magslam: Aerial Simultaneous Localization And Mapping Using Earth's Magnetic Anomaly Field, Taylor N. Lee, Aaron J. Canciani

Faculty Publications

Instances of spoofing and jamming of global navigation satellite systems (GNSSs) have emphasized the need for alternative navigation methods. Aerial navigation by magnetic map matching has been demonstrated as a viable GNSS‐alternative navigation technique. Flight test demonstrations have achieved accuracies of tens of meters over hour‐long flights, but these flights required accurate magnetic maps which are not always available. Magnetic map availability and resolution vary widely around the globe. Removing the dependency on prior survey maps extends the benefits of aerial magnetic navigation methods to small unmanned aerial systems (sUAS) at lower altitudes where magnetic maps are especially undersampled or …

Go to article

Structural Dynamic And Inherent Damping Characterization Of Additively Manufactured Airfoil Components, Andrew W. Goldin Mar 2020

Structural Dynamic And Inherent Damping Characterization Of Additively Manufactured Airfoil Components, Andrew W. Goldin

Theses and Dissertations

The push for low cost and higher performance/efficient turbine engines have introduced a new demand for novel technologies to improve robustness to vibrations resulting in High Cycle Fatigue (HCF). There have been many proposed solutions to this, some passive and some active. With the advent of Additive Manufacturing (AM), new damping techniques can now be incorporated directly into the design and manufacture process to suppress the vibrations that create HCF. In this study, this novel unfused pocket damping technology is applied to a blade structure and the resulting damping effectiveness is quantified. The application of this technology to complex geometries …

Go to article

Improved Ground-Based Monocular Visual Odometry Estimation Using Inertially-Aided Convolutional Neural Networks, Josiah D. Watson Mar 2020

Improved Ground-Based Monocular Visual Odometry Estimation Using Inertially-Aided Convolutional Neural Networks, Josiah D. Watson

Theses and Dissertations

While Convolutional Neural Networks (CNNs) can estimate frame-to-frame (F2F) motion even with monocular images, additional inputs can improve Visual Odometry (VO) predictions. In this thesis, a FlowNetS-based [1] CNN architecture estimates VO using sequential images from the KITTI Odometry dataset [2]. For each of three output types (full six degrees of freedom (6-DoF), Cartesian translation, and transitional scale), a baseline network with only image pair input is compared with a nearly identical architecture that is also given an additional rotation estimate such as from an Inertial Navigation System (INS). The inertially-aided networks show an order of magnitude improvement over the …

Go to article

Microturbine Turbojets: Experimental Evaluation Of Commercially Available Engines, Richard A. Depaola Iii Mar 2020

Microturbine Turbojets: Experimental Evaluation Of Commercially Available Engines, Richard A. Depaola Iii

Theses and Dissertations

This research assessed the performance of commercial microturbine turbojets and was the first industry-wide investigation into this class of engine by AFRL's SERL. Four commercial engines of the same thrust class were evaluated for overall and component-level performance. In addition to providing an evaluation of existing systems, the maximum performance for a commercial turbojet was predicted based on component evaluations. This analysis indicated that a commercial turbojet could have comparable thrust performance to a similarly sized military-grade engine, but it is unlikely that commercial engines can achieve the SFC of military engines without upgrading the compressors found in commercial microturbines.

Go to article

Laser Shock Peening Pressure Impulse Determination Via Empirical Data-Matching With Optimization Software, Colin C. Engebretsen Mar 2020

Laser Shock Peening Pressure Impulse Determination Via Empirical Data-Matching With Optimization Software, Colin C. Engebretsen

Theses and Dissertations

Laser shock peening (LSP) is a form of work hardening by means of laser induced pressure impulse. LSP imparts compressive residual stresses which can improve fatigue life of metallic alloys for structural use. The finite element modeling (FEM) of LSP is typically done by applying an assumed pressure impulse, as useful experimental measurement of this pressure impulse has not been adequately accomplished. This shortfall in the field is a current limitation to the accuracy of FE modeling, and was addressed in the current work. A novel method was tested to determine the pressure impulse shape in time and space by …

Go to article

Design, Development, And Testing Of A Low Cost, Additively-Manufactured, Centrifugal Compressor, Aaron P. Bauer Mar 2020

Design, Development, And Testing Of A Low Cost, Additively-Manufactured, Centrifugal Compressor, Aaron P. Bauer

Theses and Dissertations

The three objectives of this research were to: 1.) design, build, and test AM compressors to substitute into COTS micro-gas turbine engines, 2.) provide initial correlations between FEA and compressor failure speed, and 3.) characterize the effects of AM on compressor performance. These goals improved the design cycle cost and the design-validation time cycle. ULTEM 9085, 300-AMB, and Onyx-Kevlar temperature-dependent tensile properties were measured. FEA-predicted failure speeds of stock compressor designs led design improvements, potentially fulfilling the original compressor requirements. Physical testing of the stock and ULTEM 9085 compressors occurred. Comparing these compressors' performances demonstrated that low cost, AM materials …

Go to article

Solution Anneal Heat Treatments To Enhance Mechanical Performance Of Additively Manufactured Inconel 718, David J. Newell Mar 2020

Solution Anneal Heat Treatments To Enhance Mechanical Performance Of Additively Manufactured Inconel 718, David J. Newell

Theses and Dissertations

The nickel-based superalloy Inconel 718 (IN718) is an excellent candidate among aerospace alloys for laser powder-bed fusion (LPBF) manufacturing. As-built LPBF IN718 has a vertically aligned columnar (001) microstructure which translates into orthotropic mechanical behavior. The post-process heat treatments for IN718 were developed 60 years ago for wrought and cast processes and do not mitigate the columnar microstructure of the LPBF process. Recrystallization is required to remove the columnar microstructure, which would allow for parts to be fabricated on different machines or in different orientations but still achieve the same properties. This research investigated the microstructure of LPBF IN718 as …

Go to article

Development Of A Small Scale Rotating Detonation Engine, Joseph R. Dechert Mar 2020

Development Of A Small Scale Rotating Detonation Engine, Joseph R. Dechert

Theses and Dissertations

The Rotating Detonation Engine (RDE) has been researched extensively in recent years, but the minimum size limits of an RDE have not been well investigated. The goal of this research was to build an RDE small enough to produce a detonation frequency above 20 kHz with a single detonation wave while also reducing the engine's mass ow rate. An engine with these design characteristics would reduce hazards associated with previous RDE testing. This research objective resulted in the design of an RDE with an outer diameter sized at 28 mm using ethylene and nitrous oxide as a fuel and oxidizer. …

Go to article

The Effect Of Passive And Active Boundary-Layer Fences On Delta Wing Performance At Low Reynolds Number, Anna C. Demoret Mar 2020

The Effect Of Passive And Active Boundary-Layer Fences On Delta Wing Performance At Low Reynolds Number, Anna C. Demoret

Theses and Dissertations

The effect of passive and active boundary-layer fences (BLFs) on performance is evaluated on a NACA 0012 delta wing (croot = 14in, ctip = 2.8in, Λ = 45°, b = 23.5in) at a Reynolds number (Re) of 5.0 x 105 based on the root chord. The performance improvements of a passive BLF are replicated and improved upon using an active flow control (AFC) fluidic fence created by a wall-normal steady-blowing jet from a slot. The application of a passive BLF at a spanwise location of 70% z/b resulted in an 8.7% increase in CLmax compared to …

Go to article

Design And Analysis Of A Compact Combustor For Integration With A Jetcat P90 Rxi, Daniel Holobeny Mar 2020

Design And Analysis Of A Compact Combustor For Integration With A Jetcat P90 Rxi, Daniel Holobeny

Theses and Dissertations

Ultra Compact Combustors are a novel approach to modern gas turbine combustor designs that look to reduce the overall combustor length and weight. A previous study integrated an Ultra Compact Combustor into a JetCat P90 RXi turbine engine and achieved self-sustained operation with a length savings of 33% relative to the stock combustor. However, that combustor could not operate across the full stock engine performance range due to flameout at increased mass ow rates as reactions were pushed out of the primary zone. To ensure reactions stayed in the primary zone, a new design with a larger combustor volume was …

Go to article

First Prev Next Last