Aerospace Engineering Commons^™

Cosmic Calling

Syracuse University Magazine

No abstract provided.

Eigenvalue And Eigenvector Determination For Damped Gyroscopic Systems, D. P. Malone, Don L. Cronin, Timothy W. Randolph

Mechanical and Aerospace Engineering Faculty Research & Creative Works

No abstract provided.

A System For Collecting Milligram Quantities Of Cloud Condensation Nuclei, Darryl J. Alofs, Donald E. Hagen, Steven D. Medley, Daniel R. White, John L. Schmitt, Allen L. Williams

Mechanical and Aerospace Engineering Faculty Research & Creative Works

An Experimental System to Collect Cloud Condensation Nuclei (CCN) Onto Filters in Amounts Sufficient for Chemical Analysis is Described. This Experimental Apparatus is Designed to Process Ambient Air at a Rate of More Than 1 M3/min. Two Identical Systems Have Been Built. One is Installed in a Laboratory at Rolla, MO. the Other is Installed on an 11 M Long Trailer. the System Isolates Three Size Classes of CCN, Having Mass Median Diameters of 0.27, 0.12, and 0.075 Μm, Respectively, and Mass Collection Rates of 11.5, 1.28, and 0.13 Mg/day, Respectively. the above Sizes and Collection Rates Are Obtained from …

Dynamics And Control Of A Three Dimensional Gantry Crane With Cable Flexibility, Uchendu H. Eke

Mechanical & Aerospace Engineering Theses & Dissertations

The control of payload swing in industrial gantry cranes is a topic of widespread interest. In this thesis, the control of the swing of a payload idealized by a point mass assumption is investigated utilizing s, compact robotics matrix/vector representation of the dynamical model. In this form, this particular system can be viewed as sn underactuated manipulator with equal numbers of active and passive degrees of freedom. The full three dimensional model is developed and linearized by modelling the cable as a single thread of fiexible wire and the degree of dynamic coupling between the active and passive coordinates is …

A Study Of The Numerical Implementation Of Multidisciplinary Design Optimization Strategies, Rodney A. Taylor

Mechanical & Aerospace Engineering Theses & Dissertations

Design optimization provides an organized, systematic, and efficient method for obtaining design improvements based upon a specified measure of design performance. In the multidisciplinary design optimization (MDO) environment efficient optimization techniques allow complex designs to be improved by managing conflicting disciplinary design goals so as to improve the global design. This thesis studies the implementation issues surrounding MDO techniques and strategies. To facilitate this investigation two testbed problems have been selected for study. These problems consider two approaches to the conceptual design of an aeroelastic wing. The first approach is based on an idealized, two-dimensional representation of an airfoil under …

Comparison Of System Identification Techniques For The Dexterous Orbital Servicing System (Doss), Allan Terrence Morris

Electrical & Computer Engineering Theses & Dissertations

The major contribution of system identification is the development of analytical models of a system. Many identification techniques can adequately describe the input and output map. One of the challenges of these techniques is to correctly infer from the measured data the characteristics of the individual, contributing components producing a more accurate system model.

In this thesis linear, dynamic, multivariable state-space models for three joints of the Dexterous Orbital Servicing System (DOSS) are identified. DOSS is a representative space station manipulator at the NASA Langley Research Center. The dynamic models of the manipulator will first be estimated by applying nonparametric …

Wing-Section Optimization For Supersonic Viscous Flow, Cem Cihan Item

Mechanical & Aerospace Engineering Theses & Dissertations

The recent interest in the High Speed Civil Transport (HSCT) has resulted in renewed research studies of optimized supersonic cruise transport configurations. Incorporation of flow viscosity effects in the design process of such a supersonic wing is currently under investigation. This may lead to more accurate problem formulations and, in tum, greater aerodynamic efficiency than can be obtained by the traditional, inviscid, linear theories. In this context, for a design code to be a candidate for a complex optimization problem, such as three-dimensional viscous supersonic wing design, it should be validated using simpler building-block shapes.

To optimize the shape of …

Multipoint Quadratic Approximation For Numerical Optimization, Michael A. Blaylock

Theses and Dissertations

A quadratic approximation for nonlinear functions is developed in order to realize computational savings in solving numerical optimization problems. Function and gradient information accumulated from multiple design points during the iteration history is used in estimating the Hessian matrix. The approximate Hessian matrix is the available for a second order Taylor series approximation to the functions of interest. Several truss and frame models will be used to demonstrate the effectiveness of the new Multipoint Quadratic Approximation (MQA) in solving structural optimization problems.

A Decision Model For Environmental Assessment Of Process Waste Products, Kyle F. Byard

Theses and Dissertations

Environmental managers must compare the potential impacts of waste products when deciding upon courses of action. The estimation and comparison of these impacts is a subjective process, and few methods of comprehensive, quantitative comparison of waste products currently exist. The intent of this study is to develop a decision methodology to evaluate the environmental impacts of waste products and to score them for comparison. The method will follow established system design principles and incorporate significant characteristics of the waste material. Scores derived to represent the environmental impacts of materials will then he analyzed employing statistical and probabilistic methods to assess …

Intercomparison Between Commercial Condensation Nucleus Counters And An Alternating Temperature Gradient Cloud Chamber, Darryl J. Alofs, C. K. Lutrus, Donald E. Hagen

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Three Commercial CNC Counters (TSI Models 3010, 3022A, and 3025A) Are Compared with an Alternating Temperature Gradient Cloud Chamber (ALGR). Electrically Size Classified Aerosols of Sodium Chloride and Silver Are Used. Diffusional Losses within the ALGR Are Much Larger Than for the TSI Instruments: Therefore the ALGR Concentrations Are Corrected for Internal Diffusional Losses, But the TSI Instruments Are Not. the Particle Size Range Tested is 4–90 Nm. for Sodium Chloride, the TSI Concentrations Agreed Fairly Well with the Corrected ALGR at Larger Sizes, and Were Below the Corrected ALGR at Smaller Sizes. the Electrical Aerosol Classifier (EAC) Setting at …

A New Approach To Automatic Target Recognition Using Wavelet Transforms, Anitha Panapakkam, S. N. Balakrishnan, Daniel St. Clair

Computer Science Technical Reports

Automatic Target Recognition (ATR) systems have significant impact in defense applications. There is a continuing need to develop new and robust techniques to handle the increasingly complex ATR problem. The objectives of this thesis are two-fold. First a new technique to be used for ATR is developed and secondly an integrated ATR system to investigate and combine all subsystems is developed. In this thesis, we have developed a new technique for the feature extraction stage of ATR problem using wavelet transforms. Wavelet transforms have been one of the widely investigated areas of research in the past few years. The promising …

Flow Visualization Of A Turbulent Shear Flow Using An Optical Wavefront Sensor, Daniel W. Jewell

Theses and Dissertations

The research reported here investigated the use of a shearing interferometer (SI) wavefront sensor to determine the effects of shear-layer turbulence on an optical wavefront. A collimated helium-neon laser beam was propagated through a plane shear-layer produced by mixing helium and nitrogen at different velocities. Since the gases have different indices of refraction, the optical wavefront was distorted by different amounts by each gas. The SI measured the wavefront slope across the sampled area of the wavefront. The shear-layer was viewed from two orthogonal directions. This document contains shadow graphs, interference patterns imaged by each of the SI's six cameras, …

Computing Norad Mean Orbital Elements From A State Vector, Dwight E. Andersen

Theses and Dissertations

NORAD maintains and disseminates mean orbital elements on Earth-orbiting satellites in the form of Two-Line Element Sets (TLE). Five mathematical propagator models were developed for NORAD's use to predict the position and velocity using TLEs. This study investigated two approaches, Newton's method and direct iteration, to inverting this process by iterating to obtain NORAD-compatible mean orbital elements from a position and velocity state vector and the drag term. The Newton's iteration method was developed but not tested. The less computationally intensive direct iteration method was developed, coded in FORTRAN, and tested. The initial guess and subsequent corrections in the iterative …

Simulation Of Active Control Of Asymmetric Flows Around Slender Pointed Forebodies, Hazem Sharaf El-Din

Mechanical & Aerospace Engineering Theses & Dissertations

At high angles of attack, the flowfield over slender forebodies becomes asymmetric with substantial side force, which may exceed the available control capability. The unsteady compressible Navier-Stokes equations are used to investigate the effectiveness of different active control methods to alleviate and possibly eliminate the flow asymmetry and the subsequent side force. Although the research work focuses on active control methods, a passive control method has been investigated. The implicit, Roe flux-difference splitting, finite volume scheme is used for the numerical computations. Both locally-conical and three-dimensional solutions of the Navier-Stokes equations are obtained.

The asymmetric flow over five-degree semi-apex angle …

A Numerical Analysis Of Smoothed Particle Hydrodynamics, David A. Fulk

Theses and Dissertations

This dissertation studies the numerical method of Smoothed Particle Hydrodynamics SPH as a technique for solving systems of conservation equations. The research starts with a detailed consistency analysis of the method. Higher dimensions and non-smooth functions are considered in addition to the smooth one dimensional case. A stability analysis is then performed. Using a linear technique, an instability is found. Solutions are proposed to resolve the instability. Also a total variation stability analysis is performed leading to a monotone form of SPH. The concepts of consistency and stability are then used in a convergence proof. This proof uses lemmas derived …

Investigation Of Computational And Spectral Analysis Methods For Aeroacoustic Wave Propagation, Florence Odile Vanel

Mechanical & Aerospace Engineering Theses & Dissertations

Most computational fluid dynamics (CFD) schemes are not adequately accurate for solving aeroacoustics problems, which have wave amplitudes several orders of magnitude smaller yet with frequencies larger than the flow field variations generating the sound. Hence, a computational aeroacoustics (CAA) algorithm should have minimal dispersion and dissipation features. A dispersion relation preserving (DRP) scheme is, therefore, applied to solve the linearized Euler equations in order to simulate the propagation of three types of waves, namely: acoustic, vorticity, and entropy waves. The scheme is derived using an optimization procedure to ensure that the numerical derivatives preserve the wave number and angular …

Unsteady Flow Simulations About Moving Boundary Configurations Using Dynamic Domain Decomposition Techniques, Guan-Wei Yen

Mechanical & Aerospace Engineering Theses & Dissertations

A computational method is developed to solve the coupled governing equations of an unsteady flowfield and those of rigid-body dynamics in six degrees-of-freedom (6-DOF). This method is capable of simulating the unsteady flowfields around multiple component configurations with at least one of the components in relative motion with respect to the others. Two of the important phenomena that such analyses can help us to understand are the unsteady aerodynamic interference and the boundary-induced component of such a flowfield. By hybridizing two dynamic domain decomposition techniques, the grid generation task is simplified, the computer memory requirement is reduced, and the governing …

Flow Simulations About Steady-Complex And Unsteady Moving Configurations Using Structured-Overlapped And Unstructured Grids, James Charles Newman Iii

Mechanical & Aerospace Engineering Theses & Dissertations

The limiting factor in simulating flows past realistic configurations of interest has been the discretization of the physical domain on which the governing equations of fluid flow may be solved. In an attempt to circumvent this problem, many Computational Fluid Dynamic (CFD) methodologies that are based on different grid generation and domain decomposition techniques have been developed. However, due to the costs involved and expertise required, very few comparative studies between these methods have been performed. In the present work, the two CFD methodologies which show the most promise for treating complex three-dimensional configurations as well as unsteady moving boundary …

Implementation Of A Multiblock Sensitivity Analysis Method In Numerical Aerodynamic Shape Optimization, James Matthew Lacasse

Mechanical & Aerospace Engineering Theses & Dissertations

A multiblock sensitivity analysis method is applied in a numerical aerodynamic shape optimization technique. The Sensitivity Analysis Domain Decomposition (SADD) scheme which is implemented in this study was developed to reduce the computer memory requirements resulting from the aerodynamic sensitivity analysis equations, Discrete sensitivity analysis offers the ability to compute quasi-analytical derivatives in a more efficient manner than traditional finite-difference methods, which tend to be computationally expensive and prone to inaccuracies.

The direct optimization procedure couples CFD analysis based on the two-dimensional thin-layer Navier-Stokes equations with a gradient-based numerical optimization technique. The linking mechanism is the sensitivity equation derived from …

Multigrid Acceleration Of Time-Dependent Solutions Of Navier-Stokes Equations, Sarafa Oladele Ibraheem

Mechanical & Aerospace Engineering Theses & Dissertations

Recent progress in Computational Fluid Dynamics is encouraging scientists to look at fine details of flow physics of problems in which natural unsteady phenomena have hitherto been neglected. The acceleration methods that have proven very successful in steady state computations can be explored for time dependent computations. In this work, an efficient multigrid methods is developed to solve the time-dependent Euler and Navier-Stokes equations. The Beam-Warming ADI method is used as the base algorithm for time stepping calculations. Application of the developed algorithm proved very efficient in selected steady and unsteady test problems. For instance, the inherent unsteadiness present in …

Design And Construction Of The Aerobot Robotic Manipulator (Arm), William L. Cochran

Theses and Dissertations

This thesis designed, constructed, and tested a robotic arm for the Aerobot Aerial Robot. The main purpose of the ARM is to enable the Aerobot to retrieve objects for use in an annual robotics competition. Design of the ARM involved synthesizing the characteristics of simplicity, weight, strength, and size. The result was a three-degree-of-freedom manipulator that uses electric motors, cable linkages, and telescoping tubes to access a work space below the Aerobot. Forward and inverse kinematics were investigated to enable automation of the ARM. Data was collected from infrared sensors to validate the model. Manipulation of the ARM is presently …

A Numerical Study Of High-Speed Missile Configurations Using A Block- Structured Parallel Algorithm, Douglas C. Blake

Theses and Dissertations

A numerical analysis of the aerodynamic phenomena associated with the high-speed flight of a sharp-nosed, four-finned, high-fineness ratio missile using a block-structured, parallel computer algorithm is presented. The algorithm, PANS-3EM, utilizes a second-order-accurate, shock-capturing, Total Variation Diminishing scheme and incorporates a Baldwin-Lomax turbulence model. PANS-3EM allows for extreme flexibility in the choice of computational domain decomposition and computing machine of implementation. Developmental work consists of conceptualization and verification of the algorithm as well as parallel performance and scalability studies conducted on a variety of computing platforms. Using PANS-3EM, the aerodynamic characteristics of the missile are investigated. Drag and pitching moment …

Simulation Of Vertical Tail Buffet In Internal Vortex Breakdown Flows, Mark William Flanagan

Mechanical & Aerospace Engineering Theses & Dissertations

Computational simulation of vertical tail buffet in an internal vortex breakdown flow is considered. The fiuid-flow problem is formulated using the full, compressible, unsteady Navier-Stokes equations which are solved using an implicit, flux-difference splitting, finite volume scheme. The fluid-flow problem is solved in a configured circular duct using quasi-axisymmetric assumptions to simplify the flow equations. A plate is placed transverse to the incoming flow. Solution of the flow in the duct is performed with and without a rigid plate, and with and without an elastic plate. The elastic response of the plate is calculated assuming that it is a cantilever …

Three-Dimensional Transport Simulations Of The Dispersal Of Volcanic Aerosol From Mount Pinatubo, T. Duncan A. Fairlie

Mechanical & Aerospace Engineering Theses & Dissertations

A global finite-difference model that simulates the large-scale dynamics of the Earth's stratosphere and mesosphere is combined with a global spectral transport model to investigate aspects of the initial dispersal of the volcanic aerosol plume from the Mount Pinatubo eruption in 1991. Results of the modelling study are found to compare well with observations of the volcanic plume made from satellite instruments. Dynamical quantities, diagnosed from the simulated fields are used to provide insight into the evolution of the volcanic plume. Lagrangian trajectory analysis is used to help assess the performance of the Eulerian transport model and to highlight small-scale …

Design And Implementation Of Fuzzy Logic Controllers. Thesis Final Report, 27 July 1992 - 1 January 1993, Osama A. Abihana, Oscar R. Gonzalez

Electrical & Computer Engineering Faculty Publications

The main objectives of our research are to present a self-contained overview of fuzzy sets and fuzzy logic, develop a methodology for control system design using fuzzy logic controllers, and to design and implement a fuzzy logic controller for a real system. We first present the fundamental concepts of fuzzy sets and fuzzy logic. Fuzzy sets and basic fuzzy operations are defined. In addition, for control systems, it is important to understand the concepts of linguistic values, term sets, fuzzy rule base, inference methods, and defuzzification methods. Second, we introduce a four-step fuzzy logic control system design procedure. The design …

Data Reduction With Least Squares Differential Correction Using Equinoctial Elements, Michael S. Wasson

Theses and Dissertations

This study investigates earth satellite orbit estimation on a track of range, azimuth, and elevation data from a single tracking station. The estimation routine is a least squares batch filter based solely on two-body orbital motion. Using equinoctial elements for the reference orbit avoids the numerical difficulties of the classical elements at eccentricities near zero and inclinations near zero or 90 degrees. Orbits for Mir, DMSP, Explorer, Cosmos, and GPS are investigated. The goal of this study is to reduce orbit information from observations (range, azimuth, and elevation) to an element set and a covariance matrix without considering perturbation effects. …

A Synthetic Environment For Satellite Modeling And Satellite Orbital Motion, David L. Pond

Theses and Dissertations

Analysts tasked to study satellites moving in space must often rely on photographs to conduct their analysis. Often these photographs do not adequately represent how satellites move in space, their spatial relationships, or their interaction with other satellites. What analysts need is a three- dimensional synthetic environment that depicts satellites as they actually move and interact in space. This thesis addresses the early development of the Satellite Modeler (SM), a system that allows analysts to study, satellite motion and maneuvering of computer aided design (CAD) models of those satellites in a three-dimensional orbit. The system contains equipment that allows analysts …

Determination Of The Parameter Limits For Artificial Non-Random Microwave Signal Detection, Irvin Lee Burough

Master's Theses - Daytona Beach

The Doppler shift of small bandwidth (several Hertz) microwave signals makes identification of spectral features difficult; the Doppler individual bandwidth shift can be a factor of hundreds or thousands of times greater than the bandwidth. A computer model supplied by the National Aeronautics and Space Administration's (NASA) Search for Extra-Terrestrial Intelligence (SETI) project, which can simulate radio frequency interference (RFI) and a buried ETI signal, will determine the limits of the signal-to-noise ratio (SNR) and false alarm threshold for identification of the signal after Doppler shifting. By running the model on a MicroVAX II computer, it will be possible to …

Determining The Chemical Composition Of Cloud Condensation Nuclei, Allen L. Williams, Jane E. Rothert, Kent E. Mcclure, Darryl J. Alofs, Donald E. Hagen, Daniel R. White, A. R. Hopkins, Max B. Trueblood

Mechanical and Aerospace Engineering Faculty Research & Creative Works

This second progress report describes the status of the project one and one-half years after the start. The goal of the project is to develop the instrumentation to collect cloud condensation nuclei (CCN) in sufficient amounts to determine their chemical composition, and to survey the CCN composition in different climates through a series of field measurements. Our approach to CCN collection is to first form droplets on the nuclei under simulated cloud humidity conditions, which is the only known method of identifying CCN from the background aerosol. Under cloud chamber conditions, the droplets formed become larger than the surrounding aerosol, …

Hydration Behavior Of Laser Dye Aerosols Of Mixed Composition Having High Critical Supersaturations, Max B. Trueblood, Donald E. Hagen, Darryl J. Alofs

Mechanical and Aerospace Engineering Faculty Research & Creative Works

This Study Concerns Aerosol Particles of Mixed Composition. the Particles Contain a Water Insoluble Core (Polystyrene Latex), Surrounded by a Water Soluble Shell (Various Fluorescent Dyes). a Collison Nebulizer and an Electrostatic Aerosol Classifier Are Used to Prepare the Aerosol; its Critical Supersaturation Spectrum is Measured with a Diffusion Cloud Chamber. Experiments Were Done using Four Different Dyes (Disodium Fluorescein, Sulforhodamine 640, Sulforhodamine B and Rhodamine 560 Chloride) with Five Different Polystyrene Latex Sphere Sizes. the Results Indicate that a Kohler-Type Behavior is Obeyed. This Technique of Putting a Soluble Coating Onto an Insoluble Core is Found to Be a …