Open Access. Powered by Scholars. Published by Universities.®

Aerospace Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

Electrical and Computer Engineering

Institution
Keyword
Publication Year
Publication
Publication Type
File Type

Articles 631 - 660 of 875

Full-Text Articles in Aerospace Engineering

Flight Control And Hardware Design Of Multi-Rotor Systems, Nathan M. Zimmerman Jul 2016

Flight Control And Hardware Design Of Multi-Rotor Systems, Nathan M. Zimmerman

Master's Theses (2009 -)

This thesis overviews crucial concepts involved in achieving quadcopter flight such as orientation estimation and control system implementation. This thesis also presents researchers with comprehensive hardware and software specifications for a quadcopter system. The primary application for this system would be for research with regards to the implementation of advance control techniques as well as data acquisition. Key constructs of this system include hardware software specifications for a flight controller, the radio system, and the sensorless brushless motor controllers. Firstly, the thesis starts by developing a reference frame and a mathematical model for the quadcotper system. Next, flight orientation estimation …


Tilt-Rotor Drone, Benjamin Stone, Zachary Crandall Jun 2016

Tilt-Rotor Drone, Benjamin Stone, Zachary Crandall

Electrical Engineering

A drone is defined a "an unmanned aircraft that can fly autonomously[2]." In the year 2016, there exist many applications for small scale drones. Drones, having had primarily military applications, now have use in hobby robotics, photography, and even in surveying. But drones have not yet been perfected and still have room for much improvement. Several problems with drones come in the form of battery life, stability, and size. Large drones can fit many sensors and probes, but are heavy and have less flight time. For autonomous drones, stability can be an issue even though there exist many stable drones. …


A Radial Basis Function Method For Solving Optimal Control Problems., Hossein Mirinejad May 2016

A Radial Basis Function Method For Solving Optimal Control Problems., Hossein Mirinejad

Electronic Theses and Dissertations

This work presents two direct methods based on the radial basis function (RBF) interpolation and arbitrary discretization for solving continuous-time optimal control problems: RBF Collocation Method and RBF-Galerkin Method. Both methods take advantage of choosing any global RBF as the interpolant function and any arbitrary points (meshless or on a mesh) as the discretization points. The first approach is called the RBF collocation method, in which states and controls are parameterized using a global RBF, and constraints are satisfied at arbitrary discrete nodes (collocation points) to convert the continuous-time optimal control problem to a nonlinear programming (NLP) problem. The …


Incorporation Of Gnss Multipath To Improve Autonomous Rendezvous, Docking And Proximity Operations In Space, Benjamin W. Ashman Apr 2016

Incorporation Of Gnss Multipath To Improve Autonomous Rendezvous, Docking And Proximity Operations In Space, Benjamin W. Ashman

Open Access Dissertations

Automated rendezvous and docking (AR&D;) operations are important for many future space missions, such as the resupply of space stations, repair and refueling of large satellites, and active removal of orbital debris. These operations depend critically on accurate, real-time knowledge of the relative position and velocity between two space vehicles. Unfortunately, Global Navigation Satellite System (GNSS) capabilities remain severely limited in close proximity to large space structures due to significant multipath effects and signal blockage. Although GNSS is used for the initial stages of approach, other instruments such as laser, radar and vision-based systems, are required to augment GNSS during …


A Comprehensive Methodology For Design Of A Circulation Control Small-Scale Unmanned Aircraft, Konstantinos Kanistras Jan 2016

A Comprehensive Methodology For Design Of A Circulation Control Small-Scale Unmanned Aircraft, Konstantinos Kanistras

Electronic Theses and Dissertations

Unmanned Aerial Vehicles (UAVs) have become increasingly prevalent and important for a wide spectrum of civilian and military operations. When focusing on small-scale fixed-wing UAVs, payload, power and energy requirements limit considerably their utilization and flexibility allowing them to complete only those specific missions they are designed for. Circulation Control (CC) is an active flow control method used to produce increased lift over the traditional systems (flaps, slats, etc...) currently in use. This dissertation focuses on the foundations of a comprehensive methodology from design to implementation and experimental testing of Coanda-based Circulation Control Wings (CCW) for unmanned aircraft. The …


Thrust Sensing For Small Uavs, Christopher Scott Marchman Jan 2016

Thrust Sensing For Small Uavs, Christopher Scott Marchman

Masters Theses

"Unmanned aerial vehicles (UAVs) have become prevalent in both military and civilian applications. UAVs have many size categories from large-scale aircraft to micro air vehicles. The performance, health, and efficiency for UAVs of smaller sizes can be difficult to assess and few associated instrumentation systems have been developed. Thrust measurements on the ground can characterize systems especially when combined with simultaneous motor power measurements. This thesis demonstrates the use of strain measurements to measure the thrust produced by motor/propeller combinations for such small UAVs. A full-bridge Wheatstone circuit and electrical resistance strain gauges were used in conjunction with constant-stress cantilever …


Intensity Control Of Dielectric Barrier Discharge Filaments, Matthew Crawford Paliwoda Jan 2016

Intensity Control Of Dielectric Barrier Discharge Filaments, Matthew Crawford Paliwoda

Masters Theses

"When operated in a filamentary mode, a volume dielectric barrier discharge (DBD) is known to produce patterned plasma structures. These structures are currently being explored for reconfigurable metamaterial applications. In this work the presence and intensity of a single filament, within an array of filaments, was controlled by adjusting the voltage to that filament's individual needle electrode. The current, voltage, and time-averaged normalized light intensity were measured while varying the voltage of the needle through a self-biasing resistance. For a 7.5 kV, 3.2 kHz DBD in air, the needle-controlled filament intensity varies from that of the surrounding filaments to zero …


Small Satellite Noncommutative Rotation Sequence Attitude Control Using Piezoelectric Actuators, Joshua L. Evans Jan 2016

Small Satellite Noncommutative Rotation Sequence Attitude Control Using Piezoelectric Actuators, Joshua L. Evans

Theses and Dissertations--Electrical and Computer Engineering

Attitude control remains one of the top engineering challenges faced by small satellite mission planning and design. Conventional methods for attitude control include propulsion, reaction wheels, magnetic torque coils, and passive stabilization mechanisms, such as permanent magnets that align with planetary magnetic fields. Drawbacks of these conventional attitude control methods for small satellites include size, power consumption, dependence on external magnetic fields, and lack of full control authority. This research investigates an alternative, novel approach to attitude-control method for small satellites, utilizing the noncommutative property of rigid body rotation sequences. Piezoelectric bimorph actuators are used to induce sinusoidal small-amplitude satellite …


Multi-Rotor Unmanned Aerial Vehicle, Jacob Dean, James Mixter, Jordan Barr Dec 2015

Multi-Rotor Unmanned Aerial Vehicle, Jacob Dean, James Mixter, Jordan Barr

Honors Theses

An open-source Unmanned Aerial Vehicle (UAV) capable of performing at the same capacity as many top commercially available multi-rotor vehicles is developed. The system allows users unfamiliar with multi-rotor vehicles to achieve flight and land safely, while also serving as a flexible foundation for other UAV projects and opening the door to features that are not currently available. Applications of drone technology are explored.


A Study Of Ion And Electron Responses To A Dc Electric Field In A Hydrocarbon Flame, Stewart Jacobs Oct 2015

A Study Of Ion And Electron Responses To A Dc Electric Field In A Hydrocarbon Flame, Stewart Jacobs

Von Braun Symposium Student Posters

No abstract provided.


Effect Of Electrode Geometry And Location On Electrically-Modified Flames, Paulo R. Salvador Oct 2015

Effect Of Electrode Geometry And Location On Electrically-Modified Flames, Paulo R. Salvador

Von Braun Symposium Student Posters

No abstract provided.


Modeling And Test Of The Efficiency Of Electronic Speed Controllers For Brushless Dc Motors, Clayton R. Green Sep 2015

Modeling And Test Of The Efficiency Of Electronic Speed Controllers For Brushless Dc Motors, Clayton R. Green

Master's Theses

Small electric uninhabited aerial vehicles (UAV) represent a rapidly expanding market requiring optimization in both efficiency and weight; efficiency is critical during cruise or loiter where the vehicle operates at part power for up to 99% of the mission time. Of the four components (battery, motor, propeller, and electronic speed controller (ESC)) of the electric propulsion system used in small UAVs, the ESC has no accepted performance model and almost no published performance data. To collect performance data, instrumentation was developed to measure electrical power in and out of the ESC using the two wattmeter method and current sense resistors; …


P-Band Satellite Remote Sensing Antenna, Nishtha Sinha, James L. Garrison, Lin Yao-Cheng Aug 2015

P-Band Satellite Remote Sensing Antenna, Nishtha Sinha, James L. Garrison, Lin Yao-Cheng

The Summer Undergraduate Research Fellowship (SURF) Symposium

Today, there are a huge number of satellites out there in the space orbiting the earth, and there are specific frequency bands allocated for data transmission from these satellites. Signals from these satellites can be accessed at different places on earth, and used for remote sensing. Lower frequency bands are being used in this project, which have not been used earlier for remote sensing. The main idea of this study is to use the properties of two P-band communication satellites to assess their utility for ‘reflectometry’. This remote sensing method is based upon the comparison of the direct and reflected …


Cooperative 3-D Map Generation Using Multiple Uavs, Andrew Erik Lawson Jun 2015

Cooperative 3-D Map Generation Using Multiple Uavs, Andrew Erik Lawson

University Scholar Projects

This report aims to demonstrate the feasibility of building a global 3-D map from multiple UAV robots in a GPS-denied, indoor environment. Presented are the design of each robot and the reasoning behind choosing its hardware and software components, the process in which a single robot obtains a individual 3-D map entirely onboard, and lastly how the mapping concept is extended to multiple robotic agents to form a global 3-D map using a centralized server. In the latter section, this report focuses on two algorithms, Online Mapping and Map Fusion, developed to facilitate the cooperative approach. A limited selection …


Automatic Building Change Detection In Wide Area Surveillance, Paheding Sidike, Almabrok Essa, Fatema Albalooshi, Vijayan K. Asari, Varun Santhaseelan Jun 2015

Automatic Building Change Detection In Wide Area Surveillance, Paheding Sidike, Almabrok Essa, Fatema Albalooshi, Vijayan K. Asari, Varun Santhaseelan

Electrical and Computer Engineering Faculty Publications

We present an automated mechanism that can detect and characterize the building changes by analyzing airborne or satellite imagery.

The proposed framework can be categorized into three stages: building detection, boundary extraction and change identification. To detect the buildings, we utilize local phase and local amplitude from monogenic signal to extract building features for addressing issues of varying illumination. Then a support vector machine with Radial basis kernel is used for classification. In the boundary extraction stage, a level-set function with self-organizing map based segmentation method is used to find the building boundary and compute physical area of the building …


Synthetic Aperture Radar: Rapid Detection Of Target Motion In Matlab, Daniel S. Kassen May 2015

Synthetic Aperture Radar: Rapid Detection Of Target Motion In Matlab, Daniel S. Kassen

Master's Theses

Synthetic Aperture Radar (SAR) has come into widespread use in several civilian and military applications. The focus of this paper is the military application of imaging point targets captured by an airborne SAR platform. Using the traditional SAR method of determining target motion by analyzing the difference between subsequent images takes a relatively large amount of processing resources. Using methods in this thesis, target motion can be estimated before even a single image is obtained, reducing the amount of time and power used by a significantly large amount. This thesis builds on work done by Brain Zaharri and David So. …


Adaptive, Neural And Robust Control Of Wing-Rock And Aeroelastic System, Prince Ghorawat May 2015

Adaptive, Neural And Robust Control Of Wing-Rock And Aeroelastic System, Prince Ghorawat

UNLV Theses, Dissertations, Professional Papers, and Capstones

Modern aircraft exhibit wing-rock phenomenon and aeroelastic instability. Wingrock (roll single degree of freedom motion) and aeroelastic systems' (two degrees of freedom) behavior are described by complex nonlinear differential equations. The nonlinearities in the dynamics of these systems give rise to limit cycle oscillations beyond critical speed of aircraft. The onset of wing-rock and aeroelastic instability limits the performance of aircraft and can even lead to catastrophic consequences. Therefore, control of wing-rock motion and stabilization of aeroelastic systems are important. In the past, several studies have been made and experimental and analytical results have been obtained to explain the wing-rock …


Design Of A Hardware Platform For Gps-Based Orientation Sensing, Daniel Eugene Kirkpatrick Mar 2015

Design Of A Hardware Platform For Gps-Based Orientation Sensing, Daniel Eugene Kirkpatrick

Dissertations and Theses

Unmanned aerial vehicles (UAV's) have recently gained popularity in military, civil service, agriculture, commercial, and hobby use. This is due in part to their affordability, which comes from advances in component technology. That technology includes microelectromechanical systems (MEMS) for inertial sensing, microprocessor technology for sequential algorithm processing, field programmable gate arrays (FPGA's) for parallel data processing, camera technology, global navigation satellite systems (GNSS's) for navigation, and battery technology such as the high energy density of lithium polymer batteries.

Despite the success of the technology to date, there remains development before UAV's should be flying alongside manned aircraft or over populated …


Atmospheric Weather Balloon For Near Space Research, Francisco F. Pastrana, Devonte Grantham, Shane M. Williams, Jessy Law, Jennifer Nason, Janet Marrnane Jan 2015

Atmospheric Weather Balloon For Near Space Research, Francisco F. Pastrana, Devonte Grantham, Shane M. Williams, Jessy Law, Jennifer Nason, Janet Marrnane

Aviation / Aeronautics / Aerospace International Research Conference

Atmospheric Weather Balloon for Near Space Research

The Society for S.P.A.C.E. has been working on the development of a weather balloon that will reach a height of 80 to 100 thousand feet and will collect data from the atmosphere. The weather balloon is attached to a Styrofoam box that contains an Arduino board controlling a set of sensors that will measure: temperature, humidity, atmospheric pressure, wind speed and direction.

The data will be collected and transmitted through an Xbee antenna that will provide us with remote monitoring capabilities. The data and images gathered will aid understanding of the characteristics and …


Identification Of Geostationary Satellites Using Polarization Data From Unresolved Images, Andy Speicher Jan 2015

Identification Of Geostationary Satellites Using Polarization Data From Unresolved Images, Andy Speicher

Electronic Theses and Dissertations

In order to protect critical military and commercial space assets, the United States Space Surveillance Network must have the ability to positively identify and characterize all space objects. Unfortunately, positive identification and characterization of space objects is a manual and labor intensive process today since even large telescopes cannot provide resolved images of most space objects. Since resolved images of geosynchronous satellites are not technically feasible with current technology, another method of distinguishing space objects was explored that exploits the polarization signature from unresolved images.

The objective of this study was to collect and analyze visible-spectrum polarization data from unresolved …


Pulsed Inductive Plasma Studies By Spectroscopy And Internal Probe Methods, Warner C. Meeks Jan 2015

Pulsed Inductive Plasma Studies By Spectroscopy And Internal Probe Methods, Warner C. Meeks

Doctoral Dissertations

The broad effort of the Missouri Plasmoid Experiment is to elucidate the energy conversion processes in a pulsed inductive discharge due to the presence of plasma. The test article is a 440 to 490 kHz theta-pinch (or solenoidal) geometry coil with a stored energy of around 80 joules. In this work experimental hydrogen, helium, argon and xenon data at back-fill pressures of 10 to 100 mTorr (1.3 to 133.3 Pa) are obtained and interpreted. Spectral and internal probe studies were performed on MPX Mk.I and Mk.II devices, respectively. IR spectra were acquired in the Mk.I device for argon and xenon. …


Electric Field Modification Of A Diffusion Flame With Variable Electrode Geometry, Zachary Pinz Jan 2015

Electric Field Modification Of A Diffusion Flame With Variable Electrode Geometry, Zachary Pinz

Summer Community of Scholars Posters (RCEU and HCR Combined Programs)

No abstract provided.


Ultra-Fast, Autonomous, Reconfigurable Communication System, Paul Bupe Jr Jan 2015

Ultra-Fast, Autonomous, Reconfigurable Communication System, Paul Bupe Jr

College of Graduate Studies: Theses & Dissertations

The recent years have witnessed an increase in natural disasters in which the destruction of essential communication infrastructure has significantly affected the number of casualties. In 2005, Hurricane Katrina in the United States resulted in over 1,900 deaths, three million land-line phones disconnections, and more than 2000 cell sites going out of service. This incident highlighted an urgent need for a quick-deployment, efficient communication network for emergency relief purposes. In this research, a fully autonomous system to deploy Unmanned Aerial Vehicles (UAVs) as the first phase disaster recovery communication network for wide-area relief is presented. As part of this system, …


Use Of Single Stage Model Rockets To Teach Some Engineering Principles And Practices To First Year Engineering And Engineering Technology Students, Hüseyin Sarper, Linda Vahala Jan 2015

Use Of Single Stage Model Rockets To Teach Some Engineering Principles And Practices To First Year Engineering And Engineering Technology Students, Hüseyin Sarper, Linda Vahala

Electrical & Computer Engineering Faculty Publications

Model rocketry has been called miniature astronautics; a technology in miniature, a hobby, a sport, a technological recreation, an educational tool, and it is all of these things. This paper will describe student projects using model rockets and engines to learn engineering principles for launching rockets and determining the apogee. Model rocketry is a powerful tool for instructors who wish to incorporate science, technology, engineering, and mathematics into a fun, engaging, and challenging activity for first year engineering students. The apogee can be determined using four distinct methods: trigonometry using hand held angle measuring tools, onboard altimeter devices, analytical calculations …


Cloud-Induced Uncertainty For Visual Navigation, Alyssa N. Gutierrez Dec 2014

Cloud-Induced Uncertainty For Visual Navigation, Alyssa N. Gutierrez

Theses and Dissertations

This research addresses the numerical distortion of features due to the presence of clouds in an image. The research aims to quantify the probability of a mismatch between two features in a single image, which will describe the likelihood that a visual navigation system incorrectly tracks a feature throughout an image sequence, leading to position miscalculations. First, an algorithm is developed for calculating transparency of clouds in images at the pixel level. The algorithm determines transparency based on the distance between each pixel color and the average pixel color of the clouds. The algorithm is used to create a dataset …


Identification Of Hydrodynamic Forces Developed By Flapping Fins In A Watercraft Propulsion Flow Field, Erdem Aktosun Dec 2014

Identification Of Hydrodynamic Forces Developed By Flapping Fins In A Watercraft Propulsion Flow Field, Erdem Aktosun

LSU New Orleans Theses and Dissertations

In this work, the data analysis of oscillating flapping fins is conducted for mathematical model. Data points of heave and surge force obtained by the CFD (Computational Fluid Dynamics) for different geometrical kinds of flapping fins. The fin undergoes a combination of vertical and angular oscillatory motion, while travelling at constant forward speed. The surge thrust and heave lift are generated by the combined motion of the flapping fins, especially due to the carrier vehicle’s heave and pitch motion will be investigated to acquire system identification with CFD data available while the fin pitching motion is selected as a function …


Control Of A Fuel Cell Based Autonomous Electric Power System For An Aerospace Vehicle, Roshini S. Ashok Oct 2014

Control Of A Fuel Cell Based Autonomous Electric Power System For An Aerospace Vehicle, Roshini S. Ashok

Von Braun Symposium Student Posters

No abstract provided.


Dynamic Wireless Power Transfer System For The Unmanned Aerial Vehicles, Tae Sup Lee Oct 2014

Dynamic Wireless Power Transfer System For The Unmanned Aerial Vehicles, Tae Sup Lee

Open Access Theses

UAVs have limitless applications to help our daily lives for the autonomous operations. UAVs have a limited power capacity due to weight constraints and are therefore not able to travel long distances. Ground stations for recharging UAVs throughout different points can increase the flight time of the UAVs with the current UAV battery capacity. This study investigates how the wireless charging system for the ground station can be made more robust when there are misalignments. The wireless charging system is monitored by an Arduino, micro controller, to assess the current condition of charging. The Arduino is able to change the …


Characterization And Testing Of A 5.8 Kv Sic Pin Diode For Electric Space Propulsion Applications, Alexandra Toftul Aug 2014

Characterization And Testing Of A 5.8 Kv Sic Pin Diode For Electric Space Propulsion Applications, Alexandra Toftul

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

Inductive Pulsed Plasma Thrusters (IPPTs) are a type of in-space propulsion that has multiple advantages over conventional chemical propulsion for long-duration, deep space missions. Existing IPPT prototypes utilize spark gap switches, however these are subject to corrosion problems that make them unreliable for long-term use. Recent advances in solid state switching technology have opened up a variety of switching options that could provide greater reliability, controllability, and increased energy efficiency. Taking advantage of this, a novel thruster drive circuit topology containing a high-power silicon controlled rectifier (SCR) and series fast recovery diode (FRD) is proposed that is expected to increase …


Development Of A Real Time Bistatic Radar Receiver Using Signals Of Opportunity, Nicholas Rainville Jul 2014

Development Of A Real Time Bistatic Radar Receiver Using Signals Of Opportunity, Nicholas Rainville

Open Access Theses

Passive bistatic radar remote sensing offers a novel method of monitoring the Earth's surface by observing reflected signals of opportunity. The Global Positioning System (GPS) has been used as a source of signals for these observations and the scattering properties of GPS signals from rough surfaces are well understood. Recent work has extended GPS signal reflection observations and scattering models to include communications signals such as XM radio signals. However the communication signal reflectometry experiments to date have relied on collecting raw, high data-rate signals which are then post-processed after the end of the experiment. This thesis describes the development …